[PATCH] ARM: omap: pandora: fix usbhs platform data
Grazvydas Ignotas
notasas at gmail.com
Sat Feb 18 17:43:05 EST 2012
It turned out wrong OMAP HSUSB port was configured on pandora,
but still managed to work somehow. This was noticed after enabling
in-kernel mux, where USB muxing was causing other devices not to work,
because hsusb1 pins (instead of hsusb2) were wrongly remuxed, which
are used for other things on pandora.
Signed-off-by: Grazvydas Ignotas <notasas at gmail.com>
---
arch/arm/mach-omap2/board-omap3pandora.c | 10 +++++-----
1 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 1644b73..2224b5d 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -343,7 +343,7 @@ static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = {
};
static struct regulator_consumer_supply pandora_usb_phy_supply[] = {
- REGULATOR_SUPPLY("hsusb0", "ehci-omap.0"),
+ REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"),
};
/* ads7846 on SPI and 2 nub controllers on I2C */
@@ -561,13 +561,13 @@ static struct platform_device *omap3pandora_devices[] __initdata = {
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
- .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
+ .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
+ .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
.phy_reset = true,
- .reset_gpio_port[0] = 16,
- .reset_gpio_port[1] = -EINVAL,
+ .reset_gpio_port[0] = -EINVAL,
+ .reset_gpio_port[1] = 16,
.reset_gpio_port[2] = -EINVAL
};
--
1.7.0.4
More information about the linux-arm-kernel
mailing list