[PATCH v3 18/21] Atmel: move console default platform_device to serial driver

[Nicolas Ferre]

From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>

This variable spread on every SoC that is using the atmel_serial.c
driver can be included directly into the latter.

This will allow to compile multiple soc in the same kernel.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
Acked-by: Nicolas Ferre <nicolas.ferre at atmel.com>
Cc: Hans-Christian Egtvedt <egtvedt at samfundet.no>
Cc: kernel at avr32linux.org
---
 arch/arm/mach-at91/at91rm9200_devices.c  |    1 -
 arch/arm/mach-at91/at91sam9260_devices.c |    1 -
 arch/arm/mach-at91/at91sam9261_devices.c |    1 -
 arch/arm/mach-at91/at91sam9263_devices.c |    1 -
 arch/arm/mach-at91/at91sam9g45_devices.c |    1 -
 arch/arm/mach-at91/at91sam9rl_devices.c  |    1 -
 arch/arm/mach-at91/at91sam9x5.c          |    1 -
 arch/avr32/mach-at32ap/at32ap700x.c      |    2 --
 drivers/tty/serial/atmel_serial.c        |    2 ++
 9 files changed, 2 insertions(+), 9 deletions(-)

diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index aca272b..640520c 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -1115,7 +1115,6 @@ static inline void configure_usart3_pins(unsigned pins)
 }
 
 static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
-struct platform_device *atmel_default_console_device;	/* the serial console device */
 
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 {
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 34d2f5a..df487ce 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -1164,7 +1164,6 @@ static inline void configure_usart5_pins(void)
 }
 
 static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
-struct platform_device *atmel_default_console_device;	/* the serial console device */
 
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 {
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index b9c06c4..3bd10ce 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -1015,7 +1015,6 @@ static inline void configure_usart2_pins(unsigned pins)
 }
 
 static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
-struct platform_device *atmel_default_console_device;	/* the serial console device */
 
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 {
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index a8ae6f5..7792de5 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -1424,7 +1424,6 @@ static inline void configure_usart2_pins(unsigned pins)
 }
 
 static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
-struct platform_device *atmel_default_console_device;	/* the serial console device */
 
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 {
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 98e4041..4108295 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -1683,7 +1683,6 @@ static inline void configure_usart3_pins(unsigned pins)
 }
 
 static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
-struct platform_device *atmel_default_console_device;	/* the serial console device */
 
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 {
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 342a6c5..eda72e8 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -1152,7 +1152,6 @@ static inline void configure_usart3_pins(unsigned pins)
 }
 
 static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
-struct platform_device *atmel_default_console_device;	/* the serial console device */
 
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 {
diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c
index 67b37a0..90bb7ec 100644
--- a/arch/arm/mach-at91/at91sam9x5.c
+++ b/arch/arm/mach-at91/at91sam9x5.c
@@ -320,7 +320,6 @@ void __init at91sam9x5_initialize(void)
  * -------------------------------------------------------------------- */
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
 void __init at91_set_serial_console(unsigned portnr) {}
-struct platform_device *atmel_default_console_device = NULL;
 
 void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 402a7bb..889c544 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -1055,8 +1055,6 @@ struct platform_device *__init at32_add_device_usart(unsigned int id)
 	return at32_usarts[id];
 }
 
-struct platform_device *atmel_default_console_device;
-
 void __init at32_setup_serial_console(unsigned int usart_id)
 {
 	atmel_default_console_device = at32_usarts[usart_id];
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 10605ec..f9a6be7 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1526,6 +1526,8 @@ void __init atmel_register_uart_fns(struct atmel_port_fns *fns)
 	atmel_pops.set_wake	= fns->set_wake;
 }
 
+struct platform_device *atmel_default_console_device;	/* the serial console device */
+
 #ifdef CONFIG_SERIAL_ATMEL_CONSOLE
 static void atmel_console_putchar(struct uart_port *port, int ch)
 {
-- 
1.7.9