[PATCH 09/10] I2C: OMAP: Correct I2C revision for OMAP3
Shubhrajyoti D
shubhrajyoti at ti.com
Fri Feb 10 09:00:04 EST 2012
From: Jon Hunter <jon-hunter at ti.com>
The OMAP3530 is based upon the same silicon as the OMAP3430 and so the I2C
revision is the same for 3430 and 3530. However, the OMAP3630 device has the
same I2C revision as OMAP4. Correct the revision definition to reflect this.
This patch is based on work done by Jon Hunter <jon-hunter at ti.com>
Changes from his patch
- Update OMAP_I2C_REV_ON_3430 also to reflect that it is same as 3530
Cc: Ben Dooks <ben-linux at fluff.org>
Cc: Kevin Hilman <khilman at ti.com>
Signed-off-by: Jon Hunter <jon-hunter at ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti at ti.com>
---
drivers/i2c/busses/i2c-omap.c | 10 +++++-----
1 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index e556c2d..4c5d98f 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -50,8 +50,8 @@
/* I2C controller revisions present on specific hardware */
#define OMAP_I2C_REV_ON_2430 0x36
-#define OMAP_I2C_REV_ON_3430 0x3C
-#define OMAP_I2C_REV_ON_3530_4430 0x40
+#define OMAP_I2C_REV_ON_3430_3530 0x3C
+#define OMAP_I2C_REV_ON_3630_4430 0x40
/* timeout waiting for the controller to respond */
#define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000))
@@ -297,7 +297,7 @@ static int omap_i2c_reset(struct omap_i2c_dev *dev)
omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG,
SYSC_AUTOIDLE_MASK);
- } else if (dev->rev >= OMAP_I2C_REV_ON_3430) {
+ } else if (dev->rev >= OMAP_I2C_REV_ON_3430_3530) {
dev->syscstate = SYSC_AUTOIDLE_MASK;
dev->syscstate |= SYSC_ENAWAKEUP_MASK;
dev->syscstate |= (SYSC_IDLEMODE_SMART <<
@@ -1049,7 +1049,7 @@ omap_i2c_probe(struct platform_device *pdev)
dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff;
- if (dev->rev <= OMAP_I2C_REV_ON_3430)
+ if (dev->rev <= OMAP_I2C_REV_ON_3430_3530)
dev->errata |= I2C_OMAP3_1P153;
if (!(dev->flags & OMAP_I2C_FLAG_NO_FIFO)) {
@@ -1067,7 +1067,7 @@ omap_i2c_probe(struct platform_device *pdev)
dev->fifo_size = (dev->fifo_size / 2);
- if (dev->rev >= OMAP_I2C_REV_ON_3530_4430)
+ if (dev->rev >= OMAP_I2C_REV_ON_3630_4430)
dev->b_hw = 0; /* Disable hardware fixes */
else
dev->b_hw = 1; /* Enable hardware fixes */
--
1.7.1
More information about the linux-arm-kernel
mailing list