[PATCH 10/18] ARM: at91/PMC: make register base soc independent
Ryan Mallon
rmallon at gmail.com
Sun Feb 19 19:27:07 EST 2012
On 18/02/12 04:50, Nicolas Ferre wrote:
> From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
>
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
> Acked-by: Nicolas Ferre <nicolas.ferre at atmel.com>
Looks good,
Reviewed-by: Ryan Mallon <rmallon at gmail.com>
> ---
> arch/arm/mach-at91/at91rm9200.c | 2 +-
> arch/arm/mach-at91/clock.c | 75 +++++++++++++------------
> arch/arm/mach-at91/include/mach/at91_pmc.h | 56 +++++++++++-------
> arch/arm/mach-at91/include/mach/at91rm9200.h | 4 +-
> arch/arm/mach-at91/include/mach/at91sam9260.h | 1 -
> arch/arm/mach-at91/include/mach/at91sam9261.h | 1 -
> arch/arm/mach-at91/include/mach/at91sam9263.h | 1 -
> arch/arm/mach-at91/include/mach/at91sam9g45.h | 1 -
> arch/arm/mach-at91/include/mach/at91sam9rl.h | 1 -
> arch/arm/mach-at91/include/mach/at91sam9x5.h | 3 +-
> arch/arm/mach-at91/include/mach/hardware.h | 3 +-
> arch/arm/mach-at91/pm.c | 9 +--
> arch/arm/mach-at91/pm_slowclock.S | 38 ++++++------
> drivers/usb/gadget/atmel_usba_udc.c | 6 +-
> 14 files changed, 105 insertions(+), 96 deletions(-)
>
> diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
> index 94141b2..c7efa17 100644
> --- a/arch/arm/mach-at91/at91rm9200.c
> +++ b/arch/arm/mach-at91/at91rm9200.c
> @@ -295,7 +295,7 @@ static void at91rm9200_idle(void)
> * Disable the processor clock. The processor will be automatically
> * re-enabled by an interrupt or by a reset.
> */
> - at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
> + at91_pmc_write(AT91_PMC_SCDR, AT91_PMC_PCK);
> }
>
> static void at91rm9200_restart(char mode, const char *cmd)
> diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
> index d1b4e07..57b15a9 100644
> --- a/arch/arm/mach-at91/clock.c
> +++ b/arch/arm/mach-at91/clock.c
> @@ -33,6 +33,7 @@
> #include "clock.h"
> #include "generic.h"
>
> +void __iomem *at91_pmc_base;
>
> /*
> * There's a lot more which can be done with clocks, including cpufreq
> @@ -125,11 +126,11 @@ static void pllb_mode(struct clk *clk, int is_on)
> value = 0;
>
> // REVISIT: Add work-around for AT91RM9200 Errata #26 ?
> - at91_sys_write(AT91_CKGR_PLLBR, value);
> + at91_pmc_write(AT91_CKGR_PLLBR, value);
>
> do {
> cpu_relax();
> - } while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != is_on);
> + } while ((at91_pmc_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != is_on);
> }
>
> static struct clk pllb = {
> @@ -144,24 +145,24 @@ static struct clk pllb = {
> static void pmc_sys_mode(struct clk *clk, int is_on)
> {
> if (is_on)
> - at91_sys_write(AT91_PMC_SCER, clk->pmc_mask);
> + at91_pmc_write(AT91_PMC_SCER, clk->pmc_mask);
> else
> - at91_sys_write(AT91_PMC_SCDR, clk->pmc_mask);
> + at91_pmc_write(AT91_PMC_SCDR, clk->pmc_mask);
> }
>
> static void pmc_uckr_mode(struct clk *clk, int is_on)
> {
> - unsigned int uckr = at91_sys_read(AT91_CKGR_UCKR);
> + unsigned int uckr = at91_pmc_read(AT91_CKGR_UCKR);
>
> if (is_on) {
> is_on = AT91_PMC_LOCKU;
> - at91_sys_write(AT91_CKGR_UCKR, uckr | clk->pmc_mask);
> + at91_pmc_write(AT91_CKGR_UCKR, uckr | clk->pmc_mask);
> } else
> - at91_sys_write(AT91_CKGR_UCKR, uckr & ~(clk->pmc_mask));
> + at91_pmc_write(AT91_CKGR_UCKR, uckr & ~(clk->pmc_mask));
>
> do {
> cpu_relax();
> - } while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKU) != is_on);
> + } while ((at91_pmc_read(AT91_PMC_SR) & AT91_PMC_LOCKU) != is_on);
> }
>
> /* USB function clocks (PLLB must be 48 MHz) */
> @@ -197,9 +198,9 @@ struct clk mck = {
> static void pmc_periph_mode(struct clk *clk, int is_on)
> {
> if (is_on)
> - at91_sys_write(AT91_PMC_PCER, clk->pmc_mask);
> + at91_pmc_write(AT91_PMC_PCER, clk->pmc_mask);
> else
> - at91_sys_write(AT91_PMC_PCDR, clk->pmc_mask);
> + at91_pmc_write(AT91_PMC_PCDR, clk->pmc_mask);
> }
>
> static struct clk __init *at91_css_to_clk(unsigned long css)
> @@ -359,10 +360,10 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
> if (actual && actual <= rate) {
> u32 pckr;
>
> - pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
> + pckr = at91_pmc_read(AT91_PMC_PCKR(clk->id));
> pckr &= css_mask; /* keep clock selection */
> pckr |= prescale << prescale_offset;
> - at91_sys_write(AT91_PMC_PCKR(clk->id), pckr);
> + at91_pmc_write(AT91_PMC_PCKR(clk->id), pckr);
> clk->rate_hz = actual;
> break;
> }
> @@ -396,7 +397,7 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
>
> clk->rate_hz = parent->rate_hz;
> clk->parent = parent;
> - at91_sys_write(AT91_PMC_PCKR(clk->id), parent->id);
> + at91_pmc_write(AT91_PMC_PCKR(clk->id), parent->id);
>
> spin_unlock_irqrestore(&clk_lock, flags);
> return 0;
> @@ -415,7 +416,7 @@ static void __init init_programmable_clock(struct clk *clk)
> else
> css_mask = AT91_PMC_CSS;
>
> - pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
> + pckr = at91_pmc_read(AT91_PMC_PCKR(clk->id));
> parent = at91_css_to_clk(pckr & css_mask);
> clk->parent = parent;
> clk->rate_hz = parent->rate_hz / pmc_prescaler_divider(pckr);
> @@ -432,19 +433,19 @@ static int at91_clk_show(struct seq_file *s, void *unused)
> u32 scsr, pcsr, uckr = 0, sr;
> struct clk *clk;
>
> - seq_printf(s, "SCSR = %8x\n", scsr = at91_sys_read(AT91_PMC_SCSR));
> - seq_printf(s, "PCSR = %8x\n", pcsr = at91_sys_read(AT91_PMC_PCSR));
> - seq_printf(s, "MOR = %8x\n", at91_sys_read(AT91_CKGR_MOR));
> - seq_printf(s, "MCFR = %8x\n", at91_sys_read(AT91_CKGR_MCFR));
> - seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR));
> + seq_printf(s, "SCSR = %8x\n", scsr = at91_pmc_read(AT91_PMC_SCSR));
> + seq_printf(s, "PCSR = %8x\n", pcsr = at91_pmc_read(AT91_PMC_PCSR));
> + seq_printf(s, "MOR = %8x\n", at91_pmc_read(AT91_CKGR_MOR));
> + seq_printf(s, "MCFR = %8x\n", at91_pmc_read(AT91_CKGR_MCFR));
> + seq_printf(s, "PLLA = %8x\n", at91_pmc_read(AT91_CKGR_PLLAR));
> if (cpu_has_pllb())
> - seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
> + seq_printf(s, "PLLB = %8x\n", at91_pmc_read(AT91_CKGR_PLLBR));
> if (cpu_has_utmi())
> - seq_printf(s, "UCKR = %8x\n", uckr = at91_sys_read(AT91_CKGR_UCKR));
> - seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR));
> + seq_printf(s, "UCKR = %8x\n", uckr = at91_pmc_read(AT91_CKGR_UCKR));
> + seq_printf(s, "MCKR = %8x\n", at91_pmc_read(AT91_PMC_MCKR));
> if (cpu_has_upll())
> - seq_printf(s, "USB = %8x\n", at91_sys_read(AT91_PMC_USB));
> - seq_printf(s, "SR = %8x\n", sr = at91_sys_read(AT91_PMC_SR));
> + seq_printf(s, "USB = %8x\n", at91_pmc_read(AT91_PMC_USB));
> + seq_printf(s, "SR = %8x\n", sr = at91_pmc_read(AT91_PMC_SR));
>
> seq_printf(s, "\n");
>
> @@ -632,14 +633,14 @@ static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock)
> if (cpu_is_at91rm9200()) {
> uhpck.pmc_mask = AT91RM9200_PMC_UHP;
> udpck.pmc_mask = AT91RM9200_PMC_UDP;
> - at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
> + at91_pmc_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
> } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() ||
> cpu_is_at91sam9263() || cpu_is_at91sam9g20() ||
> cpu_is_at91sam9g10()) {
> uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
> udpck.pmc_mask = AT91SAM926x_PMC_UDP;
> }
> - at91_sys_write(AT91_CKGR_PLLBR, 0);
> + at91_pmc_write(AT91_CKGR_PLLBR, 0);
>
> udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
> uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
> @@ -656,13 +657,13 @@ static void __init at91_upll_usbfs_clock_init(unsigned long main_clock)
> /* Setup divider by 10 to reach 48 MHz */
> usbr |= ((10 - 1) << 8) & AT91_PMC_OHCIUSBDIV;
>
> - at91_sys_write(AT91_PMC_USB, usbr);
> + at91_pmc_write(AT91_PMC_USB, usbr);
>
> /* Now set uhpck values */
> uhpck.parent = &utmi_clk;
> uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
> uhpck.rate_hz = utmi_clk.rate_hz;
> - uhpck.rate_hz /= 1 + ((at91_sys_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8);
> + uhpck.rate_hz /= 1 + ((at91_pmc_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8);
> }
>
> int __init at91_clock_init(unsigned long main_clock)
> @@ -671,6 +672,10 @@ int __init at91_clock_init(unsigned long main_clock)
> int i;
> int pll_overclock = false;
>
> + at91_pmc_base = ioremap(AT91_PMC, 256);
> + if (!at91_pmc_base)
> + panic("Impossible to ioremap AT91_PMC 0x%x\n", AT91_PMC);
> +
> /*
> * When the bootloader initialized the main oscillator correctly,
> * there's no problem using the cycle counter. But if it didn't,
> @@ -679,14 +684,14 @@ int __init at91_clock_init(unsigned long main_clock)
> */
> if (!main_clock) {
> do {
> - tmp = at91_sys_read(AT91_CKGR_MCFR);
> + tmp = at91_pmc_read(AT91_CKGR_MCFR);
> } while (!(tmp & AT91_PMC_MAINRDY));
> main_clock = (tmp & AT91_PMC_MAINF) * (AT91_SLOW_CLOCK / 16);
> }
> main_clk.rate_hz = main_clock;
>
> /* report if PLLA is more than mildly overclocked */
> - plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR));
> + plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_pmc_read(AT91_CKGR_PLLAR));
> if (cpu_has_300M_plla()) {
> if (plla.rate_hz > 300000000)
> pll_overclock = true;
> @@ -701,7 +706,7 @@ int __init at91_clock_init(unsigned long main_clock)
> pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
>
> if (cpu_has_plladiv2()) {
> - mckr = at91_sys_read(AT91_PMC_MCKR);
> + mckr = at91_pmc_read(AT91_PMC_MCKR);
> plla.rate_hz /= (1 << ((mckr & AT91_PMC_PLLADIV2) >> 12)); /* plla divisor by 2 */
> }
>
> @@ -741,7 +746,7 @@ int __init at91_clock_init(unsigned long main_clock)
> * MCK and CPU derive from one of those primary clocks.
> * For now, assume this parentage won't change.
> */
> - mckr = at91_sys_read(AT91_PMC_MCKR);
> + mckr = at91_pmc_read(AT91_PMC_MCKR);
> mck.parent = at91_css_to_clk(mckr & AT91_PMC_CSS);
> freq = mck.parent->rate_hz;
> freq /= pmc_prescaler_divider(mckr); /* prescale */
> @@ -814,8 +819,8 @@ static int __init at91_clock_reset(void)
> pr_debug("Clocks: disable unused %s\n", clk->name);
> }
>
> - at91_sys_write(AT91_PMC_PCDR, pcdr);
> - at91_sys_write(AT91_PMC_SCDR, scdr);
> + at91_pmc_write(AT91_PMC_PCDR, pcdr);
> + at91_pmc_write(AT91_PMC_SCDR, scdr);
>
> return 0;
> }
> @@ -823,6 +828,6 @@ late_initcall(at91_clock_reset);
>
> void at91sam9_idle(void)
> {
> - at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
> + at91_pmc_write(AT91_PMC_SCDR, AT91_PMC_PCK);
> cpu_do_idle();
> }
> diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
> index f9fdbbe..3660478 100644
> --- a/arch/arm/mach-at91/include/mach/at91_pmc.h
> +++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
> @@ -16,10 +16,22 @@
> #ifndef AT91_PMC_H
> #define AT91_PMC_H
>
> -#define AT91_PMC_SCER (AT91_PMC + 0x00) /* System Clock Enable Register */
> -#define AT91_PMC_SCDR (AT91_PMC + 0x04) /* System Clock Disable Register */
> +#ifndef __ASSEMBLY__
> +extern void __iomem *at91_pmc_base;
>
> -#define AT91_PMC_SCSR (AT91_PMC + 0x08) /* System Clock Status Register */
> +#define at91_pmc_read(field) \
> + __raw_readl(at91_pmc_base + field)
> +
> +#define at91_pmc_write(field, value) \
> + __raw_writel(value, at91_pmc_base + field)
> +#else
> +.extern at91_aic_base
> +#endif
> +
> +#define AT91_PMC_SCER 0x00 /* System Clock Enable Register */
> +#define AT91_PMC_SCDR 0x04 /* System Clock Disable Register */
> +
> +#define AT91_PMC_SCSR 0x08 /* System Clock Status Register */
> #define AT91_PMC_PCK (1 << 0) /* Processor Clock */
> #define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */
> #define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
> @@ -34,17 +46,17 @@
> #define AT91_PMC_HCK0 (1 << 16) /* AHB Clock (USB host) [AT91SAM9261 only] */
> #define AT91_PMC_HCK1 (1 << 17) /* AHB Clock (LCD) [AT91SAM9261 only] */
>
> -#define AT91_PMC_PCER (AT91_PMC + 0x10) /* Peripheral Clock Enable Register */
> -#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */
> -#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */
> +#define AT91_PMC_PCER 0x10 /* Peripheral Clock Enable Register */
> +#define AT91_PMC_PCDR 0x14 /* Peripheral Clock Disable Register */
> +#define AT91_PMC_PCSR 0x18 /* Peripheral Clock Status Register */
>
> -#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [some SAM9] */
> +#define AT91_CKGR_UCKR 0x1C /* UTMI Clock Register [some SAM9] */
> #define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */
> #define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */
> #define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */
> #define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI BIAS Start-up Time */
>
> -#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */
> +#define AT91_CKGR_MOR 0x20 /* Main Oscillator Register [not on SAM9RL] */
> #define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
> #define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass */
> #define AT91_PMC_MOSCRCEN (1 << 3) /* Main On-Chip RC Oscillator Enable [some SAM9] */
> @@ -53,12 +65,12 @@
> #define AT91_PMC_MOSCSEL (1 << 24) /* Main Oscillator Selection [some SAM9] */
> #define AT91_PMC_CFDEN (1 << 25) /* Clock Failure Detector Enable [some SAM9] */
>
> -#define AT91_CKGR_MCFR (AT91_PMC + 0x24) /* Main Clock Frequency Register */
> +#define AT91_CKGR_MCFR 0x24 /* Main Clock Frequency Register */
> #define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */
> #define AT91_PMC_MAINRDY (1 << 16) /* Main Clock Ready */
>
> -#define AT91_CKGR_PLLAR (AT91_PMC + 0x28) /* PLL A Register */
> -#define AT91_CKGR_PLLBR (AT91_PMC + 0x2c) /* PLL B Register */
> +#define AT91_CKGR_PLLAR 0x28 /* PLL A Register */
> +#define AT91_CKGR_PLLBR 0x2c /* PLL B Register */
> #define AT91_PMC_DIV (0xff << 0) /* Divider */
> #define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */
> #define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */
> @@ -69,7 +81,7 @@
> #define AT91_PMC_USBDIV_4 (2 << 28)
> #define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */
>
> -#define AT91_PMC_MCKR (AT91_PMC + 0x30) /* Master Clock Register */
> +#define AT91_PMC_MCKR 0x30 /* Master Clock Register */
> #define AT91_PMC_CSS (3 << 0) /* Master Clock Selection */
> #define AT91_PMC_CSS_SLOW (0 << 0)
> #define AT91_PMC_CSS_MAIN (1 << 0)
> @@ -111,27 +123,27 @@
> #define AT91_PMC_PLLADIV2_OFF (0 << 12)
> #define AT91_PMC_PLLADIV2_ON (1 << 12)
>
> -#define AT91_PMC_USB (AT91_PMC + 0x38) /* USB Clock Register [some SAM9 only] */
> +#define AT91_PMC_USB 0x38 /* USB Clock Register [some SAM9 only] */
> #define AT91_PMC_USBS (0x1 << 0) /* USB OHCI Input clock selection */
> #define AT91_PMC_USBS_PLLA (0 << 0)
> #define AT91_PMC_USBS_UPLL (1 << 0)
> #define AT91_PMC_OHCIUSBDIV (0xF << 8) /* Divider for USB OHCI Clock */
>
> -#define AT91_PMC_SMD (AT91_PMC + 0x3c) /* Soft Modem Clock Register [some SAM9 only] */
> +#define AT91_PMC_SMD 0x3c /* Soft Modem Clock Register [some SAM9 only] */
> #define AT91_PMC_SMDS (0x1 << 0) /* SMD input clock selection */
> #define AT91_PMC_SMD_DIV (0x1f << 8) /* SMD input clock divider */
> #define AT91_PMC_SMDDIV(n) (((n) << 8) & AT91_PMC_SMD_DIV)
>
> -#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-N Registers */
> +#define AT91_PMC_PCKR(n) (0x40 + ((n) * 4)) /* Programmable Clock 0-N Registers */
> #define AT91_PMC_ALT_PCKR_CSS (0x7 << 0) /* Programmable Clock Source Selection [alternate length] */
> #define AT91_PMC_CSS_MASTER (4 << 0) /* [some SAM9 only] */
> #define AT91_PMC_CSSMCK (0x1 << 8) /* CSS or Master Clock Selection */
> #define AT91_PMC_CSSMCK_CSS (0 << 8)
> #define AT91_PMC_CSSMCK_MCK (1 << 8)
>
> -#define AT91_PMC_IER (AT91_PMC + 0x60) /* Interrupt Enable Register */
> -#define AT91_PMC_IDR (AT91_PMC + 0x64) /* Interrupt Disable Register */
> -#define AT91_PMC_SR (AT91_PMC + 0x68) /* Status Register */
> +#define AT91_PMC_IER 0x60 /* Interrupt Enable Register */
> +#define AT91_PMC_IDR 0x64 /* Interrupt Disable Register */
> +#define AT91_PMC_SR 0x68 /* Status Register */
> #define AT91_PMC_MOSCS (1 << 0) /* MOSCS Flag */
> #define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */
> #define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */
> @@ -144,18 +156,18 @@
> #define AT91_PMC_MOSCSELS (1 << 16) /* Main Oscillator Selection [some SAM9] */
> #define AT91_PMC_MOSCRCS (1 << 17) /* Main On-Chip RC [some SAM9] */
> #define AT91_PMC_CFDEV (1 << 18) /* Clock Failure Detector Event [some SAM9] */
> -#define AT91_PMC_IMR (AT91_PMC + 0x6c) /* Interrupt Mask Register */
> +#define AT91_PMC_IMR 0x6c /* Interrupt Mask Register */
>
> -#define AT91_PMC_PROT (AT91_PMC + 0xe4) /* Write Protect Mode Register [some SAM9] */
> +#define AT91_PMC_PROT 0xe4 /* Write Protect Mode Register [some SAM9] */
> #define AT91_PMC_WPEN (0x1 << 0) /* Write Protect Enable */
> #define AT91_PMC_WPKEY (0xffffff << 8) /* Write Protect Key */
> #define AT91_PMC_PROTKEY (0x504d43 << 8) /* Activation Code */
>
> -#define AT91_PMC_WPSR (AT91_PMC + 0xe8) /* Write Protect Status Register [some SAM9] */
> +#define AT91_PMC_WPSR 0xe8 /* Write Protect Status Register [some SAM9] */
> #define AT91_PMC_WPVS (0x1 << 0) /* Write Protect Violation Status */
> #define AT91_PMC_WPVSRC (0xffff << 8) /* Write Protect Violation Source */
>
> -#define AT91_PMC_PCR (AT91_PMC + 0x10c) /* Peripheral Control Register [some SAM9] */
> +#define AT91_PMC_PCR 0x10c /* Peripheral Control Register [some SAM9] */
> #define AT91_PMC_PCR_PID (0x3f << 0) /* Peripheral ID */
> #define AT91_PMC_PCR_CMD (0x1 << 12) /* Command */
> #define AT91_PMC_PCR_DIV (0x3 << 16) /* Divisor Value */
> diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h
> index 32d57be..603e6aa 100644
> --- a/arch/arm/mach-at91/include/mach/at91rm9200.h
> +++ b/arch/arm/mach-at91/include/mach/at91rm9200.h
> @@ -77,10 +77,8 @@
>
>
> /*
> - * System Peripherals (offset from AT91_BASE_SYS)
> + * System Peripherals
> */
> -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) /* Power Management Controller */
> -
> #define AT91RM9200_BASE_DBGU AT91_BASE_DBGU0 /* Debug Unit */
> #define AT91RM9200_BASE_PIOA 0xfffff400 /* PIO Controller A */
> #define AT91RM9200_BASE_PIOB 0xfffff600 /* PIO Controller B */
> diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h
> index c5b6b3b..1524e87 100644
> --- a/arch/arm/mach-at91/include/mach/at91sam9260.h
> +++ b/arch/arm/mach-at91/include/mach/at91sam9260.h
> @@ -80,7 +80,6 @@
> /*
> * System Peripherals (offset from AT91_BASE_SYS)
> */
> -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
> #define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
>
> #define AT91SAM9260_BASE_ECC 0xffffe800
> diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
> index a269cef..a6a3c1d 100644
> --- a/arch/arm/mach-at91/include/mach/at91sam9261.h
> +++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
> @@ -65,7 +65,6 @@
> /*
> * System Peripherals (offset from AT91_BASE_SYS)
> */
> -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
> #define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
>
> #define AT91SAM9261_BASE_SMC 0xffffec00
> diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h
> index bccba0b..dda083d 100644
> --- a/arch/arm/mach-at91/include/mach/at91sam9263.h
> +++ b/arch/arm/mach-at91/include/mach/at91sam9263.h
> @@ -74,7 +74,6 @@
> /*
> * System Peripherals (offset from AT91_BASE_SYS)
> */
> -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
> #define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
>
> #define AT91SAM9263_BASE_ECC0 0xffffe000
> diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
> index dfc4570..a824e15 100644
> --- a/arch/arm/mach-at91/include/mach/at91sam9g45.h
> +++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
> @@ -86,7 +86,6 @@
> /*
> * System Peripherals (offset from AT91_BASE_SYS)
> */
> -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
> #define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
>
> #define AT91SAM9G45_BASE_ECC 0xffffe200
> diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h
> index de960dc..2d7176a 100644
> --- a/arch/arm/mach-at91/include/mach/at91sam9rl.h
> +++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h
> @@ -69,7 +69,6 @@
> /*
> * System Peripherals (offset from AT91_BASE_SYS)
> */
> -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
> #define AT91_SCKCR (0xfffffd50 - AT91_BASE_SYS)
> #define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
>
> diff --git a/arch/arm/mach-at91/include/mach/at91sam9x5.h b/arch/arm/mach-at91/include/mach/at91sam9x5.h
> index 96f25f5..a297a77 100644
> --- a/arch/arm/mach-at91/include/mach/at91sam9x5.h
> +++ b/arch/arm/mach-at91/include/mach/at91sam9x5.h
> @@ -55,10 +55,9 @@
> #define AT91SAM9X5_BASE_USART2 0xf8024000
>
> /*
> - * System Peripherals (offset from AT91_BASE_SYS)
> + * System Peripherals
> */
> #define AT91SAM9X5_BASE_DDRSDRC0 0xffffe800
> -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
>
> /*
> * Base addresses for early serial code (uncompress.h)
> diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
> index fd7dce4..e9e29a6 100644
> --- a/arch/arm/mach-at91/include/mach/hardware.h
> +++ b/arch/arm/mach-at91/include/mach/hardware.h
> @@ -59,9 +59,10 @@
>
> /*
> * On all at91 have the Advanced Interrupt Controller starts at address
> - * 0xfffff000
> + * 0xfffff000 and the Power Management Controller starts at 0xfffffc00
> */
> #define AT91_AIC 0xfffff000
> +#define AT91_PMC 0xfffffc00
>
> /*
> * Peripheral identifiers/interrupts.
> diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
> index 83a0051..44f4b08 100644
> --- a/arch/arm/mach-at91/pm.c
> +++ b/arch/arm/mach-at91/pm.c
> @@ -136,7 +136,7 @@ static int at91_pm_verify_clocks(void)
> unsigned long scsr;
> int i;
>
> - scsr = at91_sys_read(AT91_PMC_SCSR);
> + scsr = at91_pmc_read(AT91_PMC_SCSR);
>
> /* USB must not be using PLLB */
> if (cpu_is_at91rm9200()) {
> @@ -160,7 +160,7 @@ static int at91_pm_verify_clocks(void)
> if ((scsr & (AT91_PMC_PCK0 << i)) == 0)
> continue;
>
> - css = at91_sys_read(AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
> + css = at91_pmc_read(AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
> if (css != AT91_PMC_CSS_SLOW) {
> pr_err("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css);
> return 0;
> @@ -197,7 +197,6 @@ extern void at91_slow_clock(void __iomem *pmc, void __iomem *ramc0,
> extern u32 at91_slow_clock_sz;
> #endif
>
> -static void __iomem *at91_pmc_base = (void __iomem*)(AT91_VA_BASE_SYS + AT91_PMC);
> void __iomem *at91_ramc_base[2];
>
> void __init at91_ioremap_ramc(int id, u32 addr, u32 size)
> @@ -208,7 +207,7 @@ void __init at91_ioremap_ramc(int id, u32 addr, u32 size)
> }
> at91_ramc_base[id] = ioremap(addr, size);
> if (!at91_ramc_base[id])
> - pr_warn("Impossible to ioremap ramc.%d 0x%x\n", id, addr);
> + panic("Impossible to ioremap ramc.%d 0x%x\n", id, addr);
> }
>
> static int at91_pm_enter(suspend_state_t state)
> @@ -218,7 +217,7 @@ static int at91_pm_enter(suspend_state_t state)
>
> pr_debug("AT91: PM - wake mask %08x, pm state %d\n",
> /* remember all the always-wake irqs */
> - (at91_sys_read(AT91_PMC_PCSR)
> + (at91_pmc_read(AT91_PMC_PCSR)
> | (1 << AT91_ID_FIQ)
> | (1 << AT91_ID_SYS)
> | (at91_extern_irq))
> diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
> index 17f4d72..abb9214 100644
> --- a/arch/arm/mach-at91/pm_slowclock.S
> +++ b/arch/arm/mach-at91/pm_slowclock.S
> @@ -54,7 +54,7 @@
> 1: sub tmp2, tmp2, #1
> cmp tmp2, #0
> beq 2f
> - ldr tmp1, [pmc, #(AT91_PMC_SR - AT91_PMC)]
> + ldr tmp1, [pmc, #AT91_PMC_SR]
> tst tmp1, #AT91_PMC_MCKRDY
> beq 1b
> 2:
> @@ -68,7 +68,7 @@
> 1: sub tmp2, tmp2, #1
> cmp tmp2, #0
> beq 2f
> - ldr tmp1, [pmc, #(AT91_PMC_SR - AT91_PMC)]
> + ldr tmp1, [pmc, #AT91_PMC_SR]
> tst tmp1, #AT91_PMC_MOSCS
> beq 1b
> 2:
> @@ -82,7 +82,7 @@
> 1: sub tmp2, tmp2, #1
> cmp tmp2, #0
> beq 2f
> - ldr tmp1, [pmc, #(AT91_PMC_SR - AT91_PMC)]
> + ldr tmp1, [pmc, #AT91_PMC_SR]
> tst tmp1, #AT91_PMC_LOCKA
> beq 1b
> 2:
> @@ -96,7 +96,7 @@
> 1: sub tmp2, tmp2, #1
> cmp tmp2, #0
> beq 2f
> - ldr tmp1, [pmc, #(AT91_PMC_SR - AT91_PMC)]
> + ldr tmp1, [pmc, #AT91_PMC_SR]
> tst tmp1, #AT91_PMC_LOCKB
> beq 1b
> 2:
> @@ -176,14 +176,14 @@ sdr_sr_enable:
>
> sdr_sr_done:
> /* Save Master clock setting */
> - ldr tmp1, [pmc, #(AT91_PMC_MCKR - AT91_PMC)]
> + ldr tmp1, [pmc, #AT91_PMC_MCKR]
> str tmp1, .saved_mckr
>
> /*
> * Set the Master clock source to slow clock
> */
> bic tmp1, tmp1, #AT91_PMC_CSS
> - str tmp1, [pmc, #(AT91_PMC_MCKR - AT91_PMC)]
> + str tmp1, [pmc, #AT91_PMC_MCKR]
>
> wait_mckrdy
>
> @@ -194,44 +194,44 @@ sdr_sr_done:
> * See AT91RM9200 errata #27 and #28 for details.
> */
> mov tmp1, #0
> - str tmp1, [pmc, #(AT91_PMC_MCKR - AT91_PMC)]
> + str tmp1, [pmc, #AT91_PMC_MCKR]
>
> wait_mckrdy
> #endif
>
> /* Save PLLA setting and disable it */
> - ldr tmp1, [pmc, #(AT91_CKGR_PLLAR - AT91_PMC)]
> + ldr tmp1, [pmc, #AT91_CKGR_PLLAR]
> str tmp1, .saved_pllar
>
> mov tmp1, #AT91_PMC_PLLCOUNT
> orr tmp1, tmp1, #(1 << 29) /* bit 29 always set */
> - str tmp1, [pmc, #(AT91_CKGR_PLLAR - AT91_PMC)]
> + str tmp1, [pmc, #AT91_CKGR_PLLAR]
>
> /* Save PLLB setting and disable it */
> - ldr tmp1, [pmc, #(AT91_CKGR_PLLBR - AT91_PMC)]
> + ldr tmp1, [pmc, #AT91_CKGR_PLLBR]
> str tmp1, .saved_pllbr
>
> mov tmp1, #AT91_PMC_PLLCOUNT
> - str tmp1, [pmc, #(AT91_CKGR_PLLBR - AT91_PMC)]
> + str tmp1, [pmc, #AT91_CKGR_PLLBR]
>
> /* Turn off the main oscillator */
> - ldr tmp1, [pmc, #(AT91_CKGR_MOR - AT91_PMC)]
> + ldr tmp1, [pmc, #AT91_CKGR_MOR]
> bic tmp1, tmp1, #AT91_PMC_MOSCEN
> - str tmp1, [pmc, #(AT91_CKGR_MOR - AT91_PMC)]
> + str tmp1, [pmc, #AT91_CKGR_MOR]
>
> /* Wait for interrupt */
> mcr p15, 0, tmp1, c7, c0, 4
>
> /* Turn on the main oscillator */
> - ldr tmp1, [pmc, #(AT91_CKGR_MOR - AT91_PMC)]
> + ldr tmp1, [pmc, #AT91_CKGR_MOR]
> orr tmp1, tmp1, #AT91_PMC_MOSCEN
> - str tmp1, [pmc, #(AT91_CKGR_MOR - AT91_PMC)]
> + str tmp1, [pmc, #AT91_CKGR_MOR]
>
> wait_moscrdy
>
> /* Restore PLLB setting */
> ldr tmp1, .saved_pllbr
> - str tmp1, [pmc, #(AT91_CKGR_PLLBR - AT91_PMC)]
> + str tmp1, [pmc, #AT91_CKGR_PLLBR]
>
> tst tmp1, #(AT91_PMC_MUL & 0xff0000)
> bne 1f
> @@ -243,7 +243,7 @@ sdr_sr_done:
>
> /* Restore PLLA setting */
> ldr tmp1, .saved_pllar
> - str tmp1, [pmc, #(AT91_CKGR_PLLAR - AT91_PMC)]
> + str tmp1, [pmc, #AT91_CKGR_PLLAR]
>
> tst tmp1, #(AT91_PMC_MUL & 0xff0000)
> bne 3f
> @@ -264,7 +264,7 @@ sdr_sr_done:
> tst tmp1, #AT91_PMC_PRES
> beq 2f
> and tmp1, tmp1, #AT91_PMC_PRES
> - str tmp1, [pmc, #(AT91_PMC_MCKR - AT91_PMC)]
> + str tmp1, [pmc, #AT91_PMC_MCKR]
>
> wait_mckrdy
> #endif
> @@ -273,7 +273,7 @@ sdr_sr_done:
> * Restore master clock setting
> */
> 2: ldr tmp1, .saved_mckr
> - str tmp1, [pmc, #(AT91_PMC_MCKR - AT91_PMC)]
> + str tmp1, [pmc, #AT91_PMC_MCKR]
>
> wait_mckrdy
>
> diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
> index e2fb6d5..ce9dffb 100644
> --- a/drivers/usb/gadget/atmel_usba_udc.c
> +++ b/drivers/usb/gadget/atmel_usba_udc.c
> @@ -332,12 +332,12 @@ static int vbus_is_present(struct usba_udc *udc)
>
> static void toggle_bias(int is_on)
> {
> - unsigned int uckr = at91_sys_read(AT91_CKGR_UCKR);
> + unsigned int uckr = at91_pmc_read(AT91_CKGR_UCKR);
>
> if (is_on)
> - at91_sys_write(AT91_CKGR_UCKR, uckr | AT91_PMC_BIASEN);
> + at91_pmc_write(AT91_CKGR_UCKR, uckr | AT91_PMC_BIASEN);
> else
> - at91_sys_write(AT91_CKGR_UCKR, uckr & ~(AT91_PMC_BIASEN));
> + at91_pmc_write(AT91_CKGR_UCKR, uckr & ~(AT91_PMC_BIASEN));
> }
>
> #else
More information about the linux-arm-kernel
mailing list