[PATCH 10/18] ARM: at91/PMC: make register base soc independent

Nicolas Ferre nicolas.ferre at atmel.com
Fri Feb 17 12:50:02 EST 2012


From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
Acked-by: Nicolas Ferre <nicolas.ferre at atmel.com>
---
 arch/arm/mach-at91/at91rm9200.c               |    2 +-
 arch/arm/mach-at91/clock.c                    |   75 +++++++++++++------------
 arch/arm/mach-at91/include/mach/at91_pmc.h    |   56 +++++++++++-------
 arch/arm/mach-at91/include/mach/at91rm9200.h  |    4 +-
 arch/arm/mach-at91/include/mach/at91sam9260.h |    1 -
 arch/arm/mach-at91/include/mach/at91sam9261.h |    1 -
 arch/arm/mach-at91/include/mach/at91sam9263.h |    1 -
 arch/arm/mach-at91/include/mach/at91sam9g45.h |    1 -
 arch/arm/mach-at91/include/mach/at91sam9rl.h  |    1 -
 arch/arm/mach-at91/include/mach/at91sam9x5.h  |    3 +-
 arch/arm/mach-at91/include/mach/hardware.h    |    3 +-
 arch/arm/mach-at91/pm.c                       |    9 +--
 arch/arm/mach-at91/pm_slowclock.S             |   38 ++++++------
 drivers/usb/gadget/atmel_usba_udc.c           |    6 +-
 14 files changed, 105 insertions(+), 96 deletions(-)

diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 94141b2..c7efa17 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -295,7 +295,7 @@ static void at91rm9200_idle(void)
 	 * Disable the processor clock.  The processor will be automatically
 	 * re-enabled by an interrupt or by a reset.
 	 */
-	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+	at91_pmc_write(AT91_PMC_SCDR, AT91_PMC_PCK);
 }
 
 static void at91rm9200_restart(char mode, const char *cmd)
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index d1b4e07..57b15a9 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -33,6 +33,7 @@
 #include "clock.h"
 #include "generic.h"
 
+void __iomem *at91_pmc_base;
 
 /*
  * There's a lot more which can be done with clocks, including cpufreq
@@ -125,11 +126,11 @@ static void pllb_mode(struct clk *clk, int is_on)
 		value = 0;
 
 	// REVISIT: Add work-around for AT91RM9200 Errata #26 ?
-	at91_sys_write(AT91_CKGR_PLLBR, value);
+	at91_pmc_write(AT91_CKGR_PLLBR, value);
 
 	do {
 		cpu_relax();
-	} while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != is_on);
+	} while ((at91_pmc_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != is_on);
 }
 
 static struct clk pllb = {
@@ -144,24 +145,24 @@ static struct clk pllb = {
 static void pmc_sys_mode(struct clk *clk, int is_on)
 {
 	if (is_on)
-		at91_sys_write(AT91_PMC_SCER, clk->pmc_mask);
+		at91_pmc_write(AT91_PMC_SCER, clk->pmc_mask);
 	else
-		at91_sys_write(AT91_PMC_SCDR, clk->pmc_mask);
+		at91_pmc_write(AT91_PMC_SCDR, clk->pmc_mask);
 }
 
 static void pmc_uckr_mode(struct clk *clk, int is_on)
 {
-	unsigned int uckr = at91_sys_read(AT91_CKGR_UCKR);
+	unsigned int uckr = at91_pmc_read(AT91_CKGR_UCKR);
 
 	if (is_on) {
 		is_on = AT91_PMC_LOCKU;
-		at91_sys_write(AT91_CKGR_UCKR, uckr | clk->pmc_mask);
+		at91_pmc_write(AT91_CKGR_UCKR, uckr | clk->pmc_mask);
 	} else
-		at91_sys_write(AT91_CKGR_UCKR, uckr & ~(clk->pmc_mask));
+		at91_pmc_write(AT91_CKGR_UCKR, uckr & ~(clk->pmc_mask));
 
 	do {
 		cpu_relax();
-	} while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKU) != is_on);
+	} while ((at91_pmc_read(AT91_PMC_SR) & AT91_PMC_LOCKU) != is_on);
 }
 
 /* USB function clocks (PLLB must be 48 MHz) */
@@ -197,9 +198,9 @@ struct clk mck = {
 static void pmc_periph_mode(struct clk *clk, int is_on)
 {
 	if (is_on)
-		at91_sys_write(AT91_PMC_PCER, clk->pmc_mask);
+		at91_pmc_write(AT91_PMC_PCER, clk->pmc_mask);
 	else
-		at91_sys_write(AT91_PMC_PCDR, clk->pmc_mask);
+		at91_pmc_write(AT91_PMC_PCDR, clk->pmc_mask);
 }
 
 static struct clk __init *at91_css_to_clk(unsigned long css)
@@ -359,10 +360,10 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 		if (actual && actual <= rate) {
 			u32	pckr;
 
-			pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
+			pckr = at91_pmc_read(AT91_PMC_PCKR(clk->id));
 			pckr &= css_mask;	/* keep clock selection */
 			pckr |= prescale << prescale_offset;
-			at91_sys_write(AT91_PMC_PCKR(clk->id), pckr);
+			at91_pmc_write(AT91_PMC_PCKR(clk->id), pckr);
 			clk->rate_hz = actual;
 			break;
 		}
@@ -396,7 +397,7 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 
 	clk->rate_hz = parent->rate_hz;
 	clk->parent = parent;
-	at91_sys_write(AT91_PMC_PCKR(clk->id), parent->id);
+	at91_pmc_write(AT91_PMC_PCKR(clk->id), parent->id);
 
 	spin_unlock_irqrestore(&clk_lock, flags);
 	return 0;
@@ -415,7 +416,7 @@ static void __init init_programmable_clock(struct clk *clk)
 	else
 		css_mask = AT91_PMC_CSS;
 
-	pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
+	pckr = at91_pmc_read(AT91_PMC_PCKR(clk->id));
 	parent = at91_css_to_clk(pckr & css_mask);
 	clk->parent = parent;
 	clk->rate_hz = parent->rate_hz / pmc_prescaler_divider(pckr);
@@ -432,19 +433,19 @@ static int at91_clk_show(struct seq_file *s, void *unused)
 	u32		scsr, pcsr, uckr = 0, sr;
 	struct clk	*clk;
 
-	seq_printf(s, "SCSR = %8x\n", scsr = at91_sys_read(AT91_PMC_SCSR));
-	seq_printf(s, "PCSR = %8x\n", pcsr = at91_sys_read(AT91_PMC_PCSR));
-	seq_printf(s, "MOR  = %8x\n", at91_sys_read(AT91_CKGR_MOR));
-	seq_printf(s, "MCFR = %8x\n", at91_sys_read(AT91_CKGR_MCFR));
-	seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR));
+	seq_printf(s, "SCSR = %8x\n", scsr = at91_pmc_read(AT91_PMC_SCSR));
+	seq_printf(s, "PCSR = %8x\n", pcsr = at91_pmc_read(AT91_PMC_PCSR));
+	seq_printf(s, "MOR  = %8x\n", at91_pmc_read(AT91_CKGR_MOR));
+	seq_printf(s, "MCFR = %8x\n", at91_pmc_read(AT91_CKGR_MCFR));
+	seq_printf(s, "PLLA = %8x\n", at91_pmc_read(AT91_CKGR_PLLAR));
 	if (cpu_has_pllb())
-		seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
+		seq_printf(s, "PLLB = %8x\n", at91_pmc_read(AT91_CKGR_PLLBR));
 	if (cpu_has_utmi())
-		seq_printf(s, "UCKR = %8x\n", uckr = at91_sys_read(AT91_CKGR_UCKR));
-	seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR));
+		seq_printf(s, "UCKR = %8x\n", uckr = at91_pmc_read(AT91_CKGR_UCKR));
+	seq_printf(s, "MCKR = %8x\n", at91_pmc_read(AT91_PMC_MCKR));
 	if (cpu_has_upll())
-		seq_printf(s, "USB  = %8x\n", at91_sys_read(AT91_PMC_USB));
-	seq_printf(s, "SR   = %8x\n", sr = at91_sys_read(AT91_PMC_SR));
+		seq_printf(s, "USB  = %8x\n", at91_pmc_read(AT91_PMC_USB));
+	seq_printf(s, "SR   = %8x\n", sr = at91_pmc_read(AT91_PMC_SR));
 
 	seq_printf(s, "\n");
 
@@ -632,14 +633,14 @@ static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock)
 	if (cpu_is_at91rm9200()) {
 		uhpck.pmc_mask = AT91RM9200_PMC_UHP;
 		udpck.pmc_mask = AT91RM9200_PMC_UDP;
-		at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
+		at91_pmc_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
 	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() ||
 		   cpu_is_at91sam9263() || cpu_is_at91sam9g20() ||
 		   cpu_is_at91sam9g10()) {
 		uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
 		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
 	}
-	at91_sys_write(AT91_CKGR_PLLBR, 0);
+	at91_pmc_write(AT91_CKGR_PLLBR, 0);
 
 	udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
 	uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
@@ -656,13 +657,13 @@ static void __init at91_upll_usbfs_clock_init(unsigned long main_clock)
 	/* Setup divider by 10 to reach 48 MHz */
 	usbr |= ((10 - 1) << 8) & AT91_PMC_OHCIUSBDIV;
 
-	at91_sys_write(AT91_PMC_USB, usbr);
+	at91_pmc_write(AT91_PMC_USB, usbr);
 
 	/* Now set uhpck values */
 	uhpck.parent = &utmi_clk;
 	uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
 	uhpck.rate_hz = utmi_clk.rate_hz;
-	uhpck.rate_hz /= 1 + ((at91_sys_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8);
+	uhpck.rate_hz /= 1 + ((at91_pmc_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8);
 }
 
 int __init at91_clock_init(unsigned long main_clock)
@@ -671,6 +672,10 @@ int __init at91_clock_init(unsigned long main_clock)
 	int i;
 	int pll_overclock = false;
 
+	at91_pmc_base = ioremap(AT91_PMC, 256);
+	if (!at91_pmc_base)
+		panic("Impossible to ioremap AT91_PMC 0x%x\n", AT91_PMC);
+
 	/*
 	 * When the bootloader initialized the main oscillator correctly,
 	 * there's no problem using the cycle counter.  But if it didn't,
@@ -679,14 +684,14 @@ int __init at91_clock_init(unsigned long main_clock)
 	 */
 	if (!main_clock) {
 		do {
-			tmp = at91_sys_read(AT91_CKGR_MCFR);
+			tmp = at91_pmc_read(AT91_CKGR_MCFR);
 		} while (!(tmp & AT91_PMC_MAINRDY));
 		main_clock = (tmp & AT91_PMC_MAINF) * (AT91_SLOW_CLOCK / 16);
 	}
 	main_clk.rate_hz = main_clock;
 
 	/* report if PLLA is more than mildly overclocked */
-	plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR));
+	plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_pmc_read(AT91_CKGR_PLLAR));
 	if (cpu_has_300M_plla()) {
 		if (plla.rate_hz > 300000000)
 			pll_overclock = true;
@@ -701,7 +706,7 @@ int __init at91_clock_init(unsigned long main_clock)
 		pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
 
 	if (cpu_has_plladiv2()) {
-		mckr = at91_sys_read(AT91_PMC_MCKR);
+		mckr = at91_pmc_read(AT91_PMC_MCKR);
 		plla.rate_hz /= (1 << ((mckr & AT91_PMC_PLLADIV2) >> 12));	/* plla divisor by 2 */
 	}
 
@@ -741,7 +746,7 @@ int __init at91_clock_init(unsigned long main_clock)
 	 * MCK and CPU derive from one of those primary clocks.
 	 * For now, assume this parentage won't change.
 	 */
-	mckr = at91_sys_read(AT91_PMC_MCKR);
+	mckr = at91_pmc_read(AT91_PMC_MCKR);
 	mck.parent = at91_css_to_clk(mckr & AT91_PMC_CSS);
 	freq = mck.parent->rate_hz;
 	freq /= pmc_prescaler_divider(mckr);					/* prescale */
@@ -814,8 +819,8 @@ static int __init at91_clock_reset(void)
 		pr_debug("Clocks: disable unused %s\n", clk->name);
 	}
 
-	at91_sys_write(AT91_PMC_PCDR, pcdr);
-	at91_sys_write(AT91_PMC_SCDR, scdr);
+	at91_pmc_write(AT91_PMC_PCDR, pcdr);
+	at91_pmc_write(AT91_PMC_SCDR, scdr);
 
 	return 0;
 }
@@ -823,6 +828,6 @@ late_initcall(at91_clock_reset);
 
 void at91sam9_idle(void)
 {
-	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+	at91_pmc_write(AT91_PMC_SCDR, AT91_PMC_PCK);
 	cpu_do_idle();
 }
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
index f9fdbbe..3660478 100644
--- a/arch/arm/mach-at91/include/mach/at91_pmc.h
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -16,10 +16,22 @@
 #ifndef AT91_PMC_H
 #define AT91_PMC_H
 
-#define	AT91_PMC_SCER		(AT91_PMC + 0x00)	/* System Clock Enable Register */
-#define	AT91_PMC_SCDR		(AT91_PMC + 0x04)	/* System Clock Disable Register */
+#ifndef __ASSEMBLY__
+extern void __iomem *at91_pmc_base;
 
-#define	AT91_PMC_SCSR		(AT91_PMC + 0x08)	/* System Clock Status Register */
+#define at91_pmc_read(field) \
+	__raw_readl(at91_pmc_base + field)
+
+#define at91_pmc_write(field, value) \
+	__raw_writel(value, at91_pmc_base + field)
+#else
+.extern at91_aic_base
+#endif
+
+#define	AT91_PMC_SCER		0x00			/* System Clock Enable Register */
+#define	AT91_PMC_SCDR		0x04			/* System Clock Disable Register */
+
+#define	AT91_PMC_SCSR		0x08			/* System Clock Status Register */
 #define		AT91_PMC_PCK		(1 <<  0)		/* Processor Clock */
 #define		AT91RM9200_PMC_UDP	(1 <<  1)		/* USB Devcice Port Clock [AT91RM9200 only] */
 #define		AT91RM9200_PMC_MCKUDP	(1 <<  2)		/* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
@@ -34,17 +46,17 @@
 #define		AT91_PMC_HCK0		(1 << 16)		/* AHB Clock (USB host) [AT91SAM9261 only] */
 #define		AT91_PMC_HCK1		(1 << 17)		/* AHB Clock (LCD) [AT91SAM9261 only] */
 
-#define	AT91_PMC_PCER		(AT91_PMC + 0x10)	/* Peripheral Clock Enable Register */
-#define	AT91_PMC_PCDR		(AT91_PMC + 0x14)	/* Peripheral Clock Disable Register */
-#define	AT91_PMC_PCSR		(AT91_PMC + 0x18)	/* Peripheral Clock Status Register */
+#define	AT91_PMC_PCER		0x10			/* Peripheral Clock Enable Register */
+#define	AT91_PMC_PCDR		0x14			/* Peripheral Clock Disable Register */
+#define	AT91_PMC_PCSR		0x18			/* Peripheral Clock Status Register */
 
-#define	AT91_CKGR_UCKR		(AT91_PMC + 0x1C)	/* UTMI Clock Register [some SAM9] */
+#define	AT91_CKGR_UCKR		0x1C			/* UTMI Clock Register [some SAM9] */
 #define		AT91_PMC_UPLLEN		(1   << 16)		/* UTMI PLL Enable */
 #define		AT91_PMC_UPLLCOUNT	(0xf << 20)		/* UTMI PLL Start-up Time */
 #define		AT91_PMC_BIASEN		(1   << 24)		/* UTMI BIAS Enable */
 #define		AT91_PMC_BIASCOUNT	(0xf << 28)		/* UTMI BIAS Start-up Time */
 
-#define	AT91_CKGR_MOR		(AT91_PMC + 0x20)	/* Main Oscillator Register [not on SAM9RL] */
+#define	AT91_CKGR_MOR		0x20			/* Main Oscillator Register [not on SAM9RL] */
 #define		AT91_PMC_MOSCEN		(1    <<  0)		/* Main Oscillator Enable */
 #define		AT91_PMC_OSCBYPASS	(1    <<  1)		/* Oscillator Bypass */
 #define		AT91_PMC_MOSCRCEN	(1    <<  3)		/* Main On-Chip RC Oscillator Enable [some SAM9] */
@@ -53,12 +65,12 @@
 #define		AT91_PMC_MOSCSEL	(1    << 24)		/* Main Oscillator Selection [some SAM9] */
 #define		AT91_PMC_CFDEN		(1    << 25)		/* Clock Failure Detector Enable [some SAM9] */
 
-#define	AT91_CKGR_MCFR		(AT91_PMC + 0x24)	/* Main Clock Frequency Register */
+#define	AT91_CKGR_MCFR		0x24			/* Main Clock Frequency Register */
 #define		AT91_PMC_MAINF		(0xffff <<  0)		/* Main Clock Frequency */
 #define		AT91_PMC_MAINRDY	(1	<< 16)		/* Main Clock Ready */
 
-#define	AT91_CKGR_PLLAR		(AT91_PMC + 0x28)	/* PLL A Register */
-#define	AT91_CKGR_PLLBR		(AT91_PMC + 0x2c)	/* PLL B Register */
+#define	AT91_CKGR_PLLAR		0x28			/* PLL A Register */
+#define	AT91_CKGR_PLLBR		0x2c			/* PLL B Register */
 #define		AT91_PMC_DIV		(0xff  <<  0)		/* Divider */
 #define		AT91_PMC_PLLCOUNT	(0x3f  <<  8)		/* PLL Counter */
 #define		AT91_PMC_OUT		(3     << 14)		/* PLL Clock Frequency Range */
@@ -69,7 +81,7 @@
 #define			AT91_PMC_USBDIV_4		(2 << 28)
 #define		AT91_PMC_USB96M		(1     << 28)		/* Divider by 2 Enable (PLLB only) */
 
-#define	AT91_PMC_MCKR		(AT91_PMC + 0x30)	/* Master Clock Register */
+#define	AT91_PMC_MCKR		0x30			/* Master Clock Register */
 #define		AT91_PMC_CSS		(3 <<  0)		/* Master Clock Selection */
 #define			AT91_PMC_CSS_SLOW		(0 << 0)
 #define			AT91_PMC_CSS_MAIN		(1 << 0)
@@ -111,27 +123,27 @@
 #define			AT91_PMC_PLLADIV2_OFF		(0 << 12)
 #define			AT91_PMC_PLLADIV2_ON		(1 << 12)
 
-#define	AT91_PMC_USB		(AT91_PMC + 0x38)	/* USB Clock Register [some SAM9 only] */
+#define	AT91_PMC_USB		0x38			/* USB Clock Register [some SAM9 only] */
 #define		AT91_PMC_USBS		(0x1 <<  0)		/* USB OHCI Input clock selection */
 #define			AT91_PMC_USBS_PLLA		(0 << 0)
 #define			AT91_PMC_USBS_UPLL		(1 << 0)
 #define		AT91_PMC_OHCIUSBDIV	(0xF <<  8)		/* Divider for USB OHCI Clock */
 
-#define	AT91_PMC_SMD		(AT91_PMC + 0x3c)	/* Soft Modem Clock Register [some SAM9 only] */
+#define	AT91_PMC_SMD		0x3c			/* Soft Modem Clock Register [some SAM9 only] */
 #define		AT91_PMC_SMDS		(0x1  <<  0)		/* SMD input clock selection */
 #define		AT91_PMC_SMD_DIV	(0x1f <<  8)		/* SMD input clock divider */
 #define		AT91_PMC_SMDDIV(n)	(((n) <<  8) & AT91_PMC_SMD_DIV)
 
-#define	AT91_PMC_PCKR(n)	(AT91_PMC + 0x40 + ((n) * 4))	/* Programmable Clock 0-N Registers */
+#define	AT91_PMC_PCKR(n)	(0x40 + ((n) * 4))	/* Programmable Clock 0-N Registers */
 #define		AT91_PMC_ALT_PCKR_CSS	(0x7 <<  0)		/* Programmable Clock Source Selection [alternate length] */
 #define			AT91_PMC_CSS_MASTER		(4 << 0)	/* [some SAM9 only] */
 #define		AT91_PMC_CSSMCK		(0x1 <<  8)		/* CSS or Master Clock Selection */
 #define			AT91_PMC_CSSMCK_CSS		(0 << 8)
 #define			AT91_PMC_CSSMCK_MCK		(1 << 8)
 
-#define	AT91_PMC_IER		(AT91_PMC + 0x60)	/* Interrupt Enable Register */
-#define	AT91_PMC_IDR		(AT91_PMC + 0x64)	/* Interrupt Disable Register */
-#define	AT91_PMC_SR		(AT91_PMC + 0x68)	/* Status Register */
+#define	AT91_PMC_IER		0x60			/* Interrupt Enable Register */
+#define	AT91_PMC_IDR		0x64			/* Interrupt Disable Register */
+#define	AT91_PMC_SR		0x68			/* Status Register */
 #define		AT91_PMC_MOSCS		(1 <<  0)		/* MOSCS Flag */
 #define		AT91_PMC_LOCKA		(1 <<  1)		/* PLLA Lock */
 #define		AT91_PMC_LOCKB		(1 <<  2)		/* PLLB Lock */
@@ -144,18 +156,18 @@
 #define		AT91_PMC_MOSCSELS	(1 << 16)		/* Main Oscillator Selection [some SAM9] */
 #define		AT91_PMC_MOSCRCS	(1 << 17)		/* Main On-Chip RC [some SAM9] */
 #define		AT91_PMC_CFDEV		(1 << 18)		/* Clock Failure Detector Event [some SAM9] */
-#define	AT91_PMC_IMR		(AT91_PMC + 0x6c)	/* Interrupt Mask Register */
+#define	AT91_PMC_IMR		0x6c			/* Interrupt Mask Register */
 
-#define AT91_PMC_PROT		(AT91_PMC + 0xe4)	/* Write Protect Mode Register [some SAM9] */
+#define AT91_PMC_PROT		0xe4			/* Write Protect Mode Register [some SAM9] */
 #define		AT91_PMC_WPEN		(0x1  <<  0)		/* Write Protect Enable */
 #define		AT91_PMC_WPKEY		(0xffffff << 8)		/* Write Protect Key */
 #define		AT91_PMC_PROTKEY	(0x504d43 << 8)		/* Activation Code */
 
-#define AT91_PMC_WPSR		(AT91_PMC + 0xe8)	/* Write Protect Status Register [some SAM9] */
+#define AT91_PMC_WPSR		0xe8			/* Write Protect Status Register [some SAM9] */
 #define		AT91_PMC_WPVS		(0x1  <<  0)		/* Write Protect Violation Status */
 #define		AT91_PMC_WPVSRC		(0xffff  <<  8)		/* Write Protect Violation Source */
 
-#define AT91_PMC_PCR		(AT91_PMC + 0x10c)	/* Peripheral Control Register [some SAM9] */
+#define AT91_PMC_PCR		0x10c			/* Peripheral Control Register [some SAM9] */
 #define		AT91_PMC_PCR_PID	(0x3f  <<  0)		/* Peripheral ID */
 #define		AT91_PMC_PCR_CMD	(0x1  <<  12)		/* Command */
 #define		AT91_PMC_PCR_DIV	(0x3  <<  16)		/* Divisor Value */
diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h
index 32d57be..603e6aa 100644
--- a/arch/arm/mach-at91/include/mach/at91rm9200.h
+++ b/arch/arm/mach-at91/include/mach/at91rm9200.h
@@ -77,10 +77,8 @@
 
 
 /*
- * System Peripherals (offset from AT91_BASE_SYS)
+ * System Peripherals
  */
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)	/* Power Management Controller */
-
 #define AT91RM9200_BASE_DBGU	AT91_BASE_DBGU0	/* Debug Unit */
 #define AT91RM9200_BASE_PIOA	0xfffff400	/* PIO Controller A */
 #define AT91RM9200_BASE_PIOB	0xfffff600	/* PIO Controller B */
diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h
index c5b6b3b..1524e87 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9260.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9260.h
@@ -80,7 +80,6 @@
 /*
  * System Peripherals (offset from AT91_BASE_SYS)
  */
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
 #define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
 
 #define AT91SAM9260_BASE_ECC	0xffffe800
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
index a269cef..a6a3c1d 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9261.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
@@ -65,7 +65,6 @@
 /*
  * System Peripherals (offset from AT91_BASE_SYS)
  */
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
 #define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
 
 #define AT91SAM9261_BASE_SMC	0xffffec00
diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h
index bccba0b..dda083d 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9263.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9263.h
@@ -74,7 +74,6 @@
 /*
  * System Peripherals (offset from AT91_BASE_SYS)
  */
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
 #define AT91_GPBR	(0xfffffd60 - AT91_BASE_SYS)
 
 #define AT91SAM9263_BASE_ECC0	0xffffe000
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
index dfc4570..a824e15 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9g45.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
@@ -86,7 +86,6 @@
 /*
  * System Peripherals (offset from AT91_BASE_SYS)
  */
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
 #define AT91_GPBR	(0xfffffd60 - AT91_BASE_SYS)
 
 #define AT91SAM9G45_BASE_ECC	0xffffe200
diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h
index de960dc..2d7176a 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9rl.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h
@@ -69,7 +69,6 @@
 /*
  * System Peripherals (offset from AT91_BASE_SYS)
  */
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
 #define AT91_SCKCR	(0xfffffd50 - AT91_BASE_SYS)
 #define AT91_GPBR	(0xfffffd60 - AT91_BASE_SYS)
 
diff --git a/arch/arm/mach-at91/include/mach/at91sam9x5.h b/arch/arm/mach-at91/include/mach/at91sam9x5.h
index 96f25f5..a297a77 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9x5.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9x5.h
@@ -55,10 +55,9 @@
 #define AT91SAM9X5_BASE_USART2	0xf8024000
 
 /*
- * System Peripherals (offset from AT91_BASE_SYS)
+ * System Peripherals
  */
 #define AT91SAM9X5_BASE_DDRSDRC0	0xffffe800
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
 
 /*
  * Base addresses for early serial code (uncompress.h)
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index fd7dce4..e9e29a6 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -59,9 +59,10 @@
 
 /*
  * On all at91 have the Advanced Interrupt Controller starts at address
- * 0xfffff000
+ * 0xfffff000 and the Power Management Controller starts at 0xfffffc00
  */
 #define AT91_AIC	0xfffff000
+#define AT91_PMC	0xfffffc00
 
 /*
  * Peripheral identifiers/interrupts.
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 83a0051..44f4b08 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -136,7 +136,7 @@ static int at91_pm_verify_clocks(void)
 	unsigned long scsr;
 	int i;
 
-	scsr = at91_sys_read(AT91_PMC_SCSR);
+	scsr = at91_pmc_read(AT91_PMC_SCSR);
 
 	/* USB must not be using PLLB */
 	if (cpu_is_at91rm9200()) {
@@ -160,7 +160,7 @@ static int at91_pm_verify_clocks(void)
 		if ((scsr & (AT91_PMC_PCK0 << i)) == 0)
 			continue;
 
-		css = at91_sys_read(AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
+		css = at91_pmc_read(AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
 		if (css != AT91_PMC_CSS_SLOW) {
 			pr_err("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css);
 			return 0;
@@ -197,7 +197,6 @@ extern void at91_slow_clock(void __iomem *pmc, void __iomem *ramc0,
 extern u32 at91_slow_clock_sz;
 #endif
 
-static void __iomem *at91_pmc_base = (void __iomem*)(AT91_VA_BASE_SYS + AT91_PMC);
 void __iomem *at91_ramc_base[2];
 
 void __init at91_ioremap_ramc(int id, u32 addr, u32 size)
@@ -208,7 +207,7 @@ void __init at91_ioremap_ramc(int id, u32 addr, u32 size)
 	}
 	at91_ramc_base[id] = ioremap(addr, size);
 	if (!at91_ramc_base[id])
-		pr_warn("Impossible to ioremap ramc.%d 0x%x\n", id, addr);
+		panic("Impossible to ioremap ramc.%d 0x%x\n", id, addr);
 }
 
 static int at91_pm_enter(suspend_state_t state)
@@ -218,7 +217,7 @@ static int at91_pm_enter(suspend_state_t state)
 
 	pr_debug("AT91: PM - wake mask %08x, pm state %d\n",
 			/* remember all the always-wake irqs */
-			(at91_sys_read(AT91_PMC_PCSR)
+			(at91_pmc_read(AT91_PMC_PCSR)
 					| (1 << AT91_ID_FIQ)
 					| (1 << AT91_ID_SYS)
 					| (at91_extern_irq))
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index 17f4d72..abb9214 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -54,7 +54,7 @@
 1:	sub	tmp2, tmp2, #1
 	cmp	tmp2, #0
 	beq	2f
-	ldr	tmp1, [pmc, #(AT91_PMC_SR - AT91_PMC)]
+	ldr	tmp1, [pmc, #AT91_PMC_SR]
 	tst	tmp1, #AT91_PMC_MCKRDY
 	beq	1b
 2:
@@ -68,7 +68,7 @@
 1:	sub	tmp2, tmp2, #1
 	cmp	tmp2, #0
 	beq	2f
-	ldr	tmp1, [pmc, #(AT91_PMC_SR - AT91_PMC)]
+	ldr	tmp1, [pmc, #AT91_PMC_SR]
 	tst	tmp1, #AT91_PMC_MOSCS
 	beq	1b
 2:
@@ -82,7 +82,7 @@
 1:	sub	tmp2, tmp2, #1
 	cmp	tmp2, #0
 	beq	2f
-	ldr	tmp1, [pmc, #(AT91_PMC_SR - AT91_PMC)]
+	ldr	tmp1, [pmc, #AT91_PMC_SR]
 	tst	tmp1, #AT91_PMC_LOCKA
 	beq	1b
 2:
@@ -96,7 +96,7 @@
 1:	sub	tmp2, tmp2, #1
 	cmp	tmp2, #0
 	beq	2f
-	ldr	tmp1, [pmc, #(AT91_PMC_SR - AT91_PMC)]
+	ldr	tmp1, [pmc, #AT91_PMC_SR]
 	tst	tmp1, #AT91_PMC_LOCKB
 	beq	1b
 2:
@@ -176,14 +176,14 @@ sdr_sr_enable:
 
 sdr_sr_done:
 	/* Save Master clock setting */
-	ldr	tmp1, [pmc, #(AT91_PMC_MCKR - AT91_PMC)]
+	ldr	tmp1, [pmc, #AT91_PMC_MCKR]
 	str	tmp1, .saved_mckr
 
 	/*
 	 * Set the Master clock source to slow clock
 	 */
 	bic	tmp1, tmp1, #AT91_PMC_CSS
-	str	tmp1, [pmc, #(AT91_PMC_MCKR - AT91_PMC)]
+	str	tmp1, [pmc, #AT91_PMC_MCKR]
 
 	wait_mckrdy
 
@@ -194,44 +194,44 @@ sdr_sr_done:
 	 * See AT91RM9200 errata #27 and #28 for details.
 	 */
 	mov	tmp1, #0
-	str	tmp1, [pmc, #(AT91_PMC_MCKR - AT91_PMC)]
+	str	tmp1, [pmc, #AT91_PMC_MCKR]
 
 	wait_mckrdy
 #endif
 
 	/* Save PLLA setting and disable it */
-	ldr	tmp1, [pmc, #(AT91_CKGR_PLLAR - AT91_PMC)]
+	ldr	tmp1, [pmc, #AT91_CKGR_PLLAR]
 	str	tmp1, .saved_pllar
 
 	mov	tmp1, #AT91_PMC_PLLCOUNT
 	orr	tmp1, tmp1, #(1 << 29)		/* bit 29 always set */
-	str	tmp1, [pmc, #(AT91_CKGR_PLLAR - AT91_PMC)]
+	str	tmp1, [pmc, #AT91_CKGR_PLLAR]
 
 	/* Save PLLB setting and disable it */
-	ldr	tmp1, [pmc, #(AT91_CKGR_PLLBR - AT91_PMC)]
+	ldr	tmp1, [pmc, #AT91_CKGR_PLLBR]
 	str	tmp1, .saved_pllbr
 
 	mov	tmp1, #AT91_PMC_PLLCOUNT
-	str	tmp1, [pmc, #(AT91_CKGR_PLLBR - AT91_PMC)]
+	str	tmp1, [pmc, #AT91_CKGR_PLLBR]
 
 	/* Turn off the main oscillator */
-	ldr	tmp1, [pmc, #(AT91_CKGR_MOR - AT91_PMC)]
+	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
 	bic	tmp1, tmp1, #AT91_PMC_MOSCEN
-	str	tmp1, [pmc, #(AT91_CKGR_MOR - AT91_PMC)]
+	str	tmp1, [pmc, #AT91_CKGR_MOR]
 
 	/* Wait for interrupt */
 	mcr	p15, 0, tmp1, c7, c0, 4
 
 	/* Turn on the main oscillator */
-	ldr	tmp1, [pmc, #(AT91_CKGR_MOR - AT91_PMC)]
+	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
 	orr	tmp1, tmp1, #AT91_PMC_MOSCEN
-	str	tmp1, [pmc, #(AT91_CKGR_MOR - AT91_PMC)]
+	str	tmp1, [pmc, #AT91_CKGR_MOR]
 
 	wait_moscrdy
 
 	/* Restore PLLB setting */
 	ldr	tmp1, .saved_pllbr
-	str	tmp1, [pmc, #(AT91_CKGR_PLLBR - AT91_PMC)]
+	str	tmp1, [pmc, #AT91_CKGR_PLLBR]
 
 	tst	tmp1, #(AT91_PMC_MUL &  0xff0000)
 	bne	1f
@@ -243,7 +243,7 @@ sdr_sr_done:
 
 	/* Restore PLLA setting */
 	ldr	tmp1, .saved_pllar
-	str	tmp1, [pmc, #(AT91_CKGR_PLLAR - AT91_PMC)]
+	str	tmp1, [pmc, #AT91_CKGR_PLLAR]
 
 	tst	tmp1, #(AT91_PMC_MUL &  0xff0000)
 	bne	3f
@@ -264,7 +264,7 @@ sdr_sr_done:
 	tst	tmp1, #AT91_PMC_PRES
 	beq	2f
 	and	tmp1, tmp1, #AT91_PMC_PRES
-	str	tmp1, [pmc, #(AT91_PMC_MCKR - AT91_PMC)]
+	str	tmp1, [pmc, #AT91_PMC_MCKR]
 
 	wait_mckrdy
 #endif
@@ -273,7 +273,7 @@ sdr_sr_done:
 	 * Restore master clock setting
 	 */
 2:	ldr	tmp1, .saved_mckr
-	str	tmp1, [pmc, #(AT91_PMC_MCKR - AT91_PMC)]
+	str	tmp1, [pmc, #AT91_PMC_MCKR]
 
 	wait_mckrdy
 
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index e2fb6d5..ce9dffb 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -332,12 +332,12 @@ static int vbus_is_present(struct usba_udc *udc)
 
 static void toggle_bias(int is_on)
 {
-	unsigned int uckr = at91_sys_read(AT91_CKGR_UCKR);
+	unsigned int uckr = at91_pmc_read(AT91_CKGR_UCKR);
 
 	if (is_on)
-		at91_sys_write(AT91_CKGR_UCKR, uckr | AT91_PMC_BIASEN);
+		at91_pmc_write(AT91_CKGR_UCKR, uckr | AT91_PMC_BIASEN);
 	else
-		at91_sys_write(AT91_CKGR_UCKR, uckr & ~(AT91_PMC_BIASEN));
+		at91_pmc_write(AT91_CKGR_UCKR, uckr & ~(AT91_PMC_BIASEN));
 }
 
 #else
-- 
1.7.9




More information about the linux-arm-kernel mailing list