[PATCH 0/3] omap hsmmc init cleanup and section warning fixes for v3.4 merge window

[Rajendra Nayak]

On Thursday 16 February 2012 05:42 PM, Russell King - ARM Linux wrote:
> On Thu, Feb 16, 2012 at 05:30:59PM +0530, Nayak, Rajendra wrote:
>>> One more patch is needed to sort out the remaining issue with
>>> omap4 that has yet another luck based initialization for the
>>> same issue..
>>>
>>
>> I did this patch on top of your series which should fix the
>> issue on all omap4 boards too. Tested on omap4panda and
>> omap4sdp boards.
>
> Can you test something with these patches?
>
> 1. Build the gpio-twl4030.c as a module, but with HSMMC support built in
> 2. Boot on the 4430SDP

twl4030 gpio is used for card detect on OMAP3, so I tried this
on my Beagle instead of 4430SDP.
The kernel boots up but does not detect/enumerate the mmc card.

> 3. Load the gpio-twl4030 module

I was expecting this to now detect the card, but I instead got
this error which seems to tell gpio-twl4030 has problems
when built/used as a module, outside of the mmc issues.

# insmod gpio-twl4030.ko
[   16.217864] twl4030_gpio twl4030_gpio: can't dispatch IRQs from modules
[   16.242004] gpiochip_add: registered GPIOs 192 to 211 on device: twl4030


> 4. Remove the gpio-twl4030 module
> 5. Re-load the gpio-twl4030.ko module
>
> and report back what you get.  Thanks.