[PATCH v2 5/7] ARM: OMAP2+: Split omap2_hsmmc_init() to properly support I2C GPIO pins
Rajendra Nayak
rnayak at ti.com
Thu Feb 23 06:40:45 EST 2012
From: Tony Lindgren <tony at atomide.com>
Otherwise omap_device_build() and omap_mux related functions
can't be marked as __init when twl is build as a module.
If a board is using GPIO pins or regulators configured by an
external chip, such as TWL PMIC on I2C bus, the board must
mark those MMC controllers as deferred. Additionally both
omap_hsmmc_init() and omap_hsmmc_deferred_add() must be called
by the board.
For MMC controllers using internal GPIO pins for card
detect and regulators the slots don't need to be marked
deferred. In this case calling omap_hsmmc_init() is sufficient.
Note that this patch does not change the behaviour for
board-4430sdp.c board-omap4panda.c. These boards wrongly
rely on the omap_hsmmc.c init function callback to configure
the PMIC GPIO interrupt lines on external chip. If the PMIC
interrupt lines are not configured during init, they will
fail.
Reported-by: Russell King <rmk+kernel at arm.linux.org.uk>
Signed-off-by: Tony Lindgren <tony at atomide.com>
Signed-off-by: Rajendra Nayak <rnayak at ti.com>
---
arch/arm/mach-omap2/board-2430sdp.c | 2 +-
arch/arm/mach-omap2/board-3430sdp.c | 12 ++--
arch/arm/mach-omap2/board-4430sdp.c | 4 +-
arch/arm/mach-omap2/board-am3517evm.c | 2 +-
arch/arm/mach-omap2/board-cm-t35.c | 10 +-
arch/arm/mach-omap2/board-devkit8000.c | 7 +-
arch/arm/mach-omap2/board-igep0020.c | 11 ++-
arch/arm/mach-omap2/board-ldp.c | 2 +-
arch/arm/mach-omap2/board-omap3beagle.c | 7 +-
arch/arm/mach-omap2/board-omap3evm.c | 9 +-
arch/arm/mach-omap2/board-omap3logic.c | 2 +-
arch/arm/mach-omap2/board-omap3pandora.c | 13 ++--
arch/arm/mach-omap2/board-omap3stalker.c | 14 ++--
arch/arm/mach-omap2/board-omap3touchbook.c | 7 +-
arch/arm/mach-omap2/board-omap4panda.c | 4 +-
arch/arm/mach-omap2/board-overo.c | 5 +-
arch/arm/mach-omap2/board-rm680.c | 2 +-
arch/arm/mach-omap2/board-rx51-peripherals.c | 2 +-
arch/arm/mach-omap2/board-zoom-peripherals.c | 9 ++-
arch/arm/mach-omap2/hsmmc.c | 117 +++++++++++++++++++-------
arch/arm/mach-omap2/hsmmc.h | 13 ++-
21 files changed, 165 insertions(+), 89 deletions(-)
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 7370983..c8bda62 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -279,7 +279,7 @@ static void __init omap_2430sdp_init(void)
platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
omap_serial_init();
omap_sdrc_init(NULL, NULL);
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_init(mmc);
omap2_usbfs_init(&sdp2430_usb_config);
omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP);
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 383717b..f93bb84 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -232,11 +232,15 @@ static struct omap2_hsmmc_info mmc[] = {
*/
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = 4,
+ .gpio_cd = OMAP_MAX_GPIO_LINES + 0,
+ .deferred = true,
},
{
.mmc = 2,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = 7,
+ .gpio_cd = OMAP_MAX_GPIO_LINES + 1,
+ .deferred = true,
},
{} /* Terminator */
};
@@ -244,12 +248,7 @@ static struct omap2_hsmmc_info mmc[] = {
static int sdp3430_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
- /* gpio + 0 is "mmc0_cd" (input/IRQ),
- * gpio + 1 is "mmc1_cd" (input/IRQ)
- */
- mmc[0].gpio_cd = gpio + 0;
- mmc[1].gpio_cd = gpio + 1;
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_deferred_add(mmc);
/* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */
gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "sub_lcd_en_bkl");
@@ -606,6 +605,7 @@ static void __init omap_3430sdp_init(void)
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_board_config = sdp3430_config;
omap_board_config_size = ARRAY_SIZE(sdp3430_config);
+ omap_hsmmc_init(mmc);
omap3430_i2c_init();
omap_display_init(&sdp3430_dss_data);
if (omap_rev() > OMAP3430_REV_ES1_0)
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 4e90715..09ae257 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -491,9 +491,9 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
{
struct omap2_hsmmc_info *c;
- omap2_hsmmc_init(controllers);
+ omap_hsmmc_init(controllers);
for (c = controllers; c->mmc; c++)
- omap4_twl6030_hsmmc_set_late_init(c->dev);
+ omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev);
return 0;
}
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 4b1cfe3..71138a1 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -504,7 +504,7 @@ static void __init am3517_evm_init(void)
am3517_evm_musb_init();
/* MMC init function */
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_init(mmc);
}
MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index d73316e..14df109 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -411,9 +411,9 @@ static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA,
- .gpio_cd = -EINVAL,
+ .gpio_cd = OMAP_MAX_GPIO_LINES + 0,
.gpio_wp = -EINVAL,
-
+ .deferred = true,
},
{
.mmc = 2,
@@ -422,6 +422,7 @@ static struct omap2_hsmmc_info mmc[] = {
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.ocr_mask = 0x00100000, /* 3.3V */
+ .deferred = true,
},
{} /* Terminator */
};
@@ -469,9 +470,7 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
pr_err("CM-T35: could not obtain gpio for WiFi reset\n");
}
- /* gpio + 0 is "mmc0_cd" (input/IRQ) */
- mmc[0].gpio_cd = gpio + 0;
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_deferred_add(mmc);
return 0;
}
@@ -639,6 +638,7 @@ static void __init cm_t3x_common_init(void)
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
+ omap_hsmmc_init(mmc);
cm_t35_init_i2c();
omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL);
cm_t35_init_ethernet();
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index e873063..6b99a5e 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -99,7 +99,9 @@ static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
+ .gpio_cd = OMAP_MAX_GPIO_LINES + 0,
.gpio_wp = 29,
+ .deferred = true,
},
{} /* Terminator */
};
@@ -226,9 +228,7 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
{
int ret;
- /* gpio + 0 is "mmc0_cd" (input/IRQ) */
- mmc[0].gpio_cd = gpio + 0;
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_deferred_add(mmc);
/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
@@ -636,6 +636,7 @@ static void __init devkit8000_init(void)
omap_dm9000_init();
+ omap_hsmmc_init(mmc);
devkit8000_i2c_init();
platform_add_devices(devkit8000_devices,
ARRAY_SIZE(devkit8000_devices));
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index a59ace0..11a6aa4 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -293,8 +293,9 @@ static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA,
- .gpio_cd = -EINVAL,
+ .gpio_cd = OMAP_MAX_GPIO_LINES + 0,
.gpio_wp = -EINVAL,
+ .deferred = true,
},
#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE)
{
@@ -302,6 +303,7 @@ static struct omap2_hsmmc_info mmc[] = {
.caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
+ .deferred = true,
},
#endif
{} /* Terminator */
@@ -400,9 +402,7 @@ static int igep_twl_gpio_setup(struct device *dev,
{
int ret;
- /* gpio + 0 is "mmc0_cd" (input/IRQ) */
- mmc[0].gpio_cd = gpio + 0;
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_deferred_add(mmc);
/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE)
@@ -639,6 +639,9 @@ static void __init igep_init(void)
/* Get IGEP2 hardware revision */
igep2_get_revision();
+
+ omap_hsmmc_init(mmc);
+
/* Register I2C busses and drivers */
igep_i2c_init();
platform_add_devices(igep_devices, ARRAY_SIZE(igep_devices));
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 2d2a61f..b5bc9b2 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -424,7 +424,7 @@ static void __init omap_ldp_init(void)
board_nand_init(ldp_nand_partitions,
ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0);
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_init(mmc);
ldp_display_init();
}
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 7ffcd28..e219b7d 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -252,7 +252,9 @@ static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
+ .gpio_cd = OMAP_MAX_GPIO_LINES + 0,
.gpio_wp = -EINVAL,
+ .deferred = true,
},
{} /* Terminator */
};
@@ -275,9 +277,7 @@ static int beagle_twl_gpio_setup(struct device *dev,
if (beagle_config.mmc1_gpio_wp != -EINVAL)
omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT);
mmc[0].gpio_wp = beagle_config.mmc1_gpio_wp;
- /* gpio + 0 is "mmc0_cd" (input/IRQ) */
- mmc[0].gpio_cd = gpio + 0;
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_deferred_add(mmc);
/*
* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active
@@ -521,6 +521,7 @@ static void __init omap3_beagle_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap3_beagle_init_rev();
+ omap_hsmmc_init(mmc);
omap3_beagle_i2c_init();
gpio_buttons[0].gpio = beagle_config.usr_button_gpio;
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index c775bea..b736c4d 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -315,8 +315,9 @@ static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA,
- .gpio_cd = -EINVAL,
+ .gpio_cd = OMAP_MAX_GPIO_LINES + 0,
.gpio_wp = 63,
+ .deferred = true,
},
#ifdef CONFIG_WL12XX_PLATFORM_DATA
{
@@ -326,6 +327,7 @@ static struct omap2_hsmmc_info mmc[] = {
.gpio_wp = -EINVAL,
.gpio_cd = -EINVAL,
.nonremovable = true,
+ .deferred = true,
},
#endif
{} /* Terminator */
@@ -360,10 +362,8 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
{
int r, lcd_bl_en;
- /* gpio + 0 is "mmc0_cd" (input/IRQ) */
omap_mux_init_gpio(63, OMAP_PIN_INPUT);
- mmc[0].gpio_cd = gpio + 0;
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_deferred_add(mmc);
/*
* Most GPIOs are for USB OTG. Some are mostly sent to
@@ -644,6 +644,7 @@ static void __init omap3_evm_init(void)
omap_board_config = omap3_evm_config;
omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
+ omap_hsmmc_init(mmc);
omap3_evm_i2c_init();
omap_display_init(&omap3_evm_dss_data);
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 4198dd0..2304ba3 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -128,7 +128,7 @@ static void __init board_mmc_init(void)
return;
}
- omap2_hsmmc_init(board_mmc_info);
+ omap_hsmmc_init(board_mmc_info);
}
static struct omap_smsc911x_platform_data __initdata board_smsc911x_data = {
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 1644b73..d984048 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -270,17 +270,19 @@ static struct omap2_hsmmc_info omap3pandora_mmc[] = {
{
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA,
- .gpio_cd = -EINVAL,
+ .gpio_cd = OMAP_MAX_GPIO_LINES + 0,
.gpio_wp = 126,
.ext_clock = 0,
+ .deferred = true,
},
{
.mmc = 2,
.caps = MMC_CAP_4_BIT_DATA,
- .gpio_cd = -EINVAL,
+ .gpio_cd = OMAP_MAX_GPIO_LINES + 1,
.gpio_wp = 127,
.ext_clock = 1,
.transceiver = true,
+ .deferred = true,
},
{
.mmc = 3,
@@ -288,6 +290,7 @@ static struct omap2_hsmmc_info omap3pandora_mmc[] = {
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.init_card = pandora_wl1251_init_card,
+ .deferred = true,
},
{} /* Terminator */
};
@@ -297,10 +300,7 @@ static int omap3pandora_twl_gpio_setup(struct device *dev,
{
int ret, gpio_32khz;
- /* gpio + {0,1} is "mmc{0,1}_cd" (input/IRQ) */
- omap3pandora_mmc[0].gpio_cd = gpio + 0;
- omap3pandora_mmc[1].gpio_cd = gpio + 1;
- omap2_hsmmc_init(omap3pandora_mmc);
+ omap_hsmmc_deferred_add(omap3pandora_mmc);
/* gpio + 13 drives 32kHz buffer for wifi module */
gpio_32khz = gpio + 13;
@@ -580,6 +580,7 @@ static struct omap_board_mux board_mux[] __initdata = {
static void __init omap3pandora_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+ omap_hsmmc_init(omap3pandora_mmc);
omap3pandora_i2c_init();
pandora_wl1251_init();
platform_add_devices(omap3pandora_devices,
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index cb089a4..a2fb3e3 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -209,10 +209,11 @@ static struct regulator_init_data omap3stalker_vsim = {
static struct omap2_hsmmc_info mmc[] = {
{
- .mmc = 1,
- .caps = MMC_CAP_4_BIT_DATA,
- .gpio_cd = -EINVAL,
- .gpio_wp = 23,
+ .mmc = 1,
+ .caps = MMC_CAP_4_BIT_DATA,
+ .gpio_cd = OMAP_MAX_GPIO_LINES + 0,
+ .gpio_wp = 23,
+ .deferred = true,
},
{} /* Terminator */
};
@@ -281,10 +282,8 @@ static int
omap3stalker_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
- /* gpio + 0 is "mmc0_cd" (input/IRQ) */
omap_mux_init_gpio(23, OMAP_PIN_INPUT);
- mmc[0].gpio_cd = gpio + 0;
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_deferred_add(mmc);
/*
* Most GPIOs are for USB OTG. Some are mostly sent to
@@ -425,6 +424,7 @@ static void __init omap3_stalker_init(void)
omap_board_config = omap3_stalker_config;
omap_board_config_size = ARRAY_SIZE(omap3_stalker_config);
+ omap_hsmmc_init(mmc);
omap3_stalker_i2c_init();
platform_add_devices(omap3_stalker_devices,
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index a0b851a..b5ff46b 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -99,7 +99,9 @@ static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
+ .gpio_cd = OMAP_MAX_GPIO_LINES + 0,
.gpio_wp = 29,
+ .deferred = true,
},
{} /* Terminator */
};
@@ -123,9 +125,7 @@ static int touchbook_twl_gpio_setup(struct device *dev,
} else {
omap_mux_init_gpio(29, OMAP_PIN_INPUT);
}
- /* gpio + 0 is "mmc0_cd" (input/IRQ) */
- mmc[0].gpio_cd = gpio + 0;
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_deferred_add(mmc);
/* REVISIT: need ehci-omap hooks for external VBUS
* power switch and overcurrent detect
@@ -351,6 +351,7 @@ static void __init omap3_touchbook_init(void)
pm_power_off = omap3_touchbook_poweroff;
+ omap_hsmmc_init(mmc);
omap3_touchbook_i2c_init();
platform_add_devices(omap3_touchbook_devices,
ARRAY_SIZE(omap3_touchbook_devices));
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 28fc271..bcc563c 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -245,9 +245,9 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
{
struct omap2_hsmmc_info *c;
- omap2_hsmmc_init(controllers);
+ omap_hsmmc_init(controllers);
for (c = controllers; c->mmc; c++)
- omap4_twl6030_hsmmc_set_late_init(c->dev);
+ omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev);
return 0;
}
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 52c0cef..8b6065b 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -301,6 +301,7 @@ static struct omap2_hsmmc_info mmc[] = {
.caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
+ .deferred = true,
},
{
.mmc = 2,
@@ -309,6 +310,7 @@ static struct omap2_hsmmc_info mmc[] = {
.gpio_wp = -EINVAL,
.transceiver = true,
.ocr_mask = 0x00100000, /* 3.3V */
+ .deferred = true,
},
{} /* Terminator */
};
@@ -407,7 +409,7 @@ static inline void __init overo_init_keys(void) { return; }
static int overo_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_deferred_add(mmc);
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
@@ -505,6 +507,7 @@ static void __init overo_init(void)
int ret;
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+ omap_hsmmc_init(mmc);
overo_i2c_init();
omap_display_init(&overo_dss_data);
omap_serial_init();
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 8678b38..2d24c98 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -120,7 +120,7 @@ static void __init rm680_peripherals_init(void)
ARRAY_SIZE(rm680_peripherals_devices));
rm680_i2c_init();
gpmc_onenand_init(board_onenand_data);
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_init(mmc);
}
#ifdef CONFIG_OMAP_MUX
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index acb4e77..0e9d89a 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -1145,7 +1145,7 @@ void __init rx51_peripherals_init(void)
partition = omap_mux_get("core");
if (partition)
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_init(mmc);
rx51_charger_init();
}
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index c126461..f99284f 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -203,8 +203,10 @@ static struct omap2_hsmmc_info mmc[] = {
.name = "external",
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA,
+ .gpio_cd = OMAP_MAX_GPIO_LINES + 0,
.gpio_wp = -EINVAL,
.power_saving = true,
+ .deferred = true,
},
{
.name = "internal",
@@ -214,6 +216,7 @@ static struct omap2_hsmmc_info mmc[] = {
.gpio_wp = -EINVAL,
.nonremovable = true,
.power_saving = true,
+ .deferred = true,
},
{
.name = "wl1271",
@@ -222,6 +225,7 @@ static struct omap2_hsmmc_info mmc[] = {
.gpio_wp = -EINVAL,
.gpio_cd = -EINVAL,
.nonremovable = true,
+ .deferred = true,
},
{} /* Terminator */
};
@@ -231,9 +235,7 @@ static int zoom_twl_gpio_setup(struct device *dev,
{
int ret;
- /* gpio + 0 is "mmc0_cd" (input/IRQ) */
- mmc[0].gpio_cd = gpio + 0;
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_deferred_add(mmc);
ret = gpio_request_one(LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW,
"lcd enable");
@@ -301,6 +303,7 @@ void __init zoom_peripherals_init(void)
if (ret)
pr_err("error setting wl12xx data: %d\n", ret);
+ omap_hsmmc_init(mmc);
omap_i2c_init();
platform_device_register(&omap_vwlan_device);
usb_musb_init(NULL);
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index b40c288..51e3a2d 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -430,64 +430,118 @@ static int omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
#define MAX_OMAP_MMC_HWMOD_NAME_LEN 16
-void omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
+static void omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo,
+ int ctrl_nr, int deferred)
{
struct omap_hwmod *oh;
+ struct omap_hwmod *ohs[1];
+ struct omap_device *od;
struct platform_device *pdev;
char oh_name[MAX_OMAP_MMC_HWMOD_NAME_LEN];
struct omap_mmc_platform_data *mmc_data;
struct omap_mmc_dev_attr *mmc_dev_attr;
char *name;
- int l;
+ int res;
- mmc_data = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL);
- if (!mmc_data) {
- pr_err("Cannot allocate memory for mmc device!\n");
- goto done;
- }
+ if (!hsmmcinfo->mmc_data) {
+ mmc_data = kzalloc(sizeof(*mmc_data), GFP_KERNEL);
+ if (!mmc_data) {
+ pr_err("Cannot allocate memory for mmc device!\n");
+ return;
+ }
- if (omap_hsmmc_pdata_init(hsmmcinfo, mmc_data) < 0) {
- pr_err("%s fails!\n", __func__);
- goto done;
+ res = omap_hsmmc_pdata_init(hsmmcinfo, mmc_data);
+ if (res < 0)
+ goto free_mmc;
+
+ omap_hsmmc_mux(mmc_data, (ctrl_nr - 1));
+ hsmmcinfo->mmc_data = kmemdup(mmc_data, sizeof(*mmc_data),
+ GFP_KERNEL);
+ if (!hsmmcinfo->mmc_data) {
+ pr_err("Cannot allocate memory for mmc device!\n");
+ goto free_mmc;
+ }
+ } else {
+ mmc_data = kmemdup(hsmmcinfo->mmc_data, sizeof(*mmc_data),
+ GFP_KERNEL);
+ if (!mmc_data) {
+ pr_err("Cannot allocate memory for mmc device!\n");
+ return;
+ }
}
- omap_hsmmc_mux(mmc_data, (ctrl_nr - 1));
- name = "omap_hsmmc";
+ if (deferred)
+ goto free_mmc;
- l = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN,
+ name = "omap_hsmmc";
+ res = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN,
"mmc%d", ctrl_nr);
- WARN(l >= MAX_OMAP_MMC_HWMOD_NAME_LEN,
+ WARN(res >= MAX_OMAP_MMC_HWMOD_NAME_LEN,
"String buffer overflow in MMC%d device setup\n", ctrl_nr);
+
oh = omap_hwmod_lookup(oh_name);
if (!oh) {
pr_err("Could not look up %s\n", oh_name);
- kfree(mmc_data->slots[0].name);
- goto done;
+ goto free_name;
}
-
+ ohs[0] = oh;
if (oh->dev_attr != NULL) {
mmc_dev_attr = oh->dev_attr;
mmc_data->controller_flags = mmc_dev_attr->flags;
}
- pdev = omap_device_build(name, ctrl_nr - 1, oh, mmc_data,
- sizeof(struct omap_mmc_platform_data), NULL, 0, false);
- if (IS_ERR(pdev)) {
- WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name);
- kfree(mmc_data->slots[0].name);
- goto done;
+ pdev = platform_device_alloc(name, ctrl_nr - 1);
+ if (!pdev) {
+ pr_err("Could not allocate pdev for %s\n", name);
+ goto free_name;
+ }
+ dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id);
+
+ od = omap_device_alloc(pdev, ohs, 1, NULL, 0);
+ if (!od) {
+ pr_err("Could not allocate od for %s\n", name);
+ goto put_pdev;
}
- /*
- * return device handle to board setup code
- * required to populate for regulator framework structure
- */
- hsmmcinfo->dev = &pdev->dev;
-done:
+ res = platform_device_add_data(pdev, mmc_data, sizeof(*mmc_data));
+ if (res) {
+ pr_err("Could not add pdata for %s\n", name);
+ goto put_pdev;
+ }
+
+ hsmmcinfo->pdev = pdev;
+
+ res = omap_device_register(pdev);
+ if (res) {
+ pr_err("Could not register od for %s\n", name);
+ goto free_od;
+ }
+
+ goto free_mmc;
+
+free_od:
+ omap_device_delete(od);
+
+put_pdev:
+ platform_device_put(pdev);
+
+free_name:
+ kfree(mmc_data->slots[0].name);
+
+free_mmc:
kfree(mmc_data);
}
-void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
+void omap_hsmmc_deferred_add(struct omap2_hsmmc_info *controllers)
+{
+ for (; controllers->mmc; controllers++) {
+ if (!controllers->deferred)
+ continue;
+ omap_hsmmc_init_one(controllers, controllers->mmc, 0);
+ }
+}
+
+void omap_hsmmc_init(struct omap2_hsmmc_info *controllers)
{
u32 reg;
@@ -515,7 +569,8 @@ void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
}
for (; controllers->mmc; controllers++)
- omap_init_hsmmc(controllers, controllers->mmc);
+ omap_hsmmc_init_one(controllers, controllers->mmc,
+ controllers->deferred);
}
diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h
index c440973..75d57fb 100644
--- a/arch/arm/mach-omap2/hsmmc.h
+++ b/arch/arm/mach-omap2/hsmmc.h
@@ -21,24 +21,31 @@ struct omap2_hsmmc_info {
bool no_off; /* power_saving and power is not to go off */
bool no_off_init; /* no power off when not in MMC sleep state */
bool vcc_aux_disable_is_sleep; /* Regulator off remapped to sleep */
+ bool deferred; /* mmc needs a deferred probe */
int gpio_cd; /* or -EINVAL */
int gpio_wp; /* or -EINVAL */
char *name; /* or NULL for default */
- struct device *dev; /* returned: pointer to mmc adapter */
+ struct platform_device *pdev; /* mmc controller instance */
int ocr_mask; /* temporary HACK */
/* Remux (pad configuration) when powering on/off */
void (*remux)(struct device *dev, int slot, int power_on);
/* init some special card */
void (*init_card)(struct mmc_card *card);
+ struct omap_mmc_platform_data *mmc_data;
};
#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
-void omap2_hsmmc_init(struct omap2_hsmmc_info *);
+void omap_hsmmc_init(struct omap2_hsmmc_info *);
+void omap_hsmmc_deferred_add(struct omap2_hsmmc_info *);
#else
-static inline void omap2_hsmmc_init(struct omap2_hsmmc_info *info)
+static inline void omap_hsmmc_init(struct omap2_hsmmc_info *info)
+{
+}
+
+static inline void omap_hsmmc_deferred_add(struct omap2_hsmmc_info *info)
{
}
--
1.7.1
More information about the linux-arm-kernel
mailing list