[PATCH v2 3/7] ARM: imx: eliminate macro IMX_GPIO_TO_IRQ()
Shawn Guo
shawn.guo at linaro.org
Wed Feb 15 13:47:44 EST 2012
This patch changes all the static gpio irq number assigning with
IMX_GPIO_TO_IRQ() to run-time assigning with gpio_to_irq call, and
in turn eliminates the macro IMX_GPIO_TO_IRQ().
Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
---
arch/arm/mach-imx/mach-cpuimx35.c | 3 ++-
arch/arm/mach-imx/mach-mx27_3ds.c | 3 ++-
arch/arm/mach-imx/mach-vpr200.c | 3 ++-
arch/arm/mach-mx5/board-cpuimx51.c | 12 ++++++++----
arch/arm/mach-mx5/board-cpuimx51sd.c | 6 ++++--
arch/arm/mach-mx5/board-mx53_ard.c | 5 +++--
arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c | 3 ++-
arch/arm/mach-mx5/mx51_efika.c | 3 ++-
arch/arm/plat-mxc/include/mach/hardware.h | 2 --
9 files changed, 25 insertions(+), 15 deletions(-)
diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
index 8ecc872..ad52a61 100644
--- a/arch/arm/mach-imx/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -72,7 +72,7 @@ static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
I2C_BOARD_INFO("tsc2007", 0x48),
.type = "tsc2007",
.platform_data = &tsc2007_info,
- .irq = IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO),
+ /* irq number is run-time assigned */
},
};
@@ -173,6 +173,7 @@ static void __init eukrea_cpuimx35_init(void)
imx35_add_imx_uart0(&uart_pdata);
imx35_add_mxc_nand(&eukrea_cpuimx35_nand_board_info);
+ eukrea_cpuimx35_i2c_devices[1].irq = gpio_to_irq(TSC2007_IRQGPIO);
i2c_register_board_info(0, eukrea_cpuimx35_i2c_devices,
ARRAY_SIZE(eukrea_cpuimx35_i2c_devices));
imx35_add_imx_i2c0(&eukrea_cpuimx35_i2c0_data);
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index 18f3581..0b0d9f0 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -356,7 +356,7 @@ static struct spi_board_info mx27_3ds_spi_devs[] __initdata = {
.bus_num = 1,
.chip_select = 0, /* SS0 */
.platform_data = &mc13783_pdata,
- .irq = IMX_GPIO_TO_IRQ(PMIC_INT),
+ /* irq number is run-time assigned */
.mode = SPI_CS_HIGH,
}, {
.modalias = "l4f00242t03",
@@ -398,6 +398,7 @@ static void __init mx27pdk_init(void)
imx27_add_spi_imx1(&spi2_pdata);
imx27_add_spi_imx0(&spi1_pdata);
+ mx27_3ds_spi_devs[0].irq = gpio_to_irq(PMIC_INT);
spi_register_board_info(mx27_3ds_spi_devs,
ARRAY_SIZE(mx27_3ds_spi_devs));
diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
index 033257e..7b06020 100644
--- a/arch/arm/mach-imx/mach-vpr200.c
+++ b/arch/arm/mach-imx/mach-vpr200.c
@@ -162,7 +162,7 @@ static struct i2c_board_info vpr200_i2c_devices[] = {
}, {
I2C_BOARD_INFO("mc13892", 0x08),
.platform_data = &vpr200_pmic,
- .irq = IMX_GPIO_TO_IRQ(GPIO_PMIC_INT),
+ /* irq number is run-time assigned */
}
};
@@ -299,6 +299,7 @@ static void __init vpr200_board_init(void)
imx35_add_mxc_nand(&vpr200_nand_board_info);
imx35_add_sdhci_esdhc_imx(0, NULL);
+ vpr200_i2c_devices[1].irq = gpio_to_irq(GPIO_PMIC_INT);
i2c_register_board_info(0, vpr200_i2c_devices,
ARRAY_SIZE(vpr200_i2c_devices));
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index 944025d..156a692 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -54,7 +54,7 @@
static struct plat_serial8250_port serial_platform_data[] = {
{
.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x400000),
- .irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTA_GPIO),
+ /* irq number is run-time assigned */
.irqflags = IRQF_TRIGGER_HIGH,
.uartclk = CPUIMX51_QUART_XTAL,
.regshift = CPUIMX51_QUART_REGSHIFT,
@@ -62,7 +62,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x800000),
- .irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTB_GPIO),
+ /* irq number is run-time assigned */
.irqflags = IRQF_TRIGGER_HIGH,
.uartclk = CPUIMX51_QUART_XTAL,
.regshift = CPUIMX51_QUART_REGSHIFT,
@@ -70,7 +70,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x1000000),
- .irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTC_GPIO),
+ /* irq number is run-time assigned */
.irqflags = IRQF_TRIGGER_HIGH,
.uartclk = CPUIMX51_QUART_XTAL,
.regshift = CPUIMX51_QUART_REGSHIFT,
@@ -78,7 +78,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
- .irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTD_GPIO),
+ /* irq number is run-time assigned */
.irqflags = IRQF_TRIGGER_HIGH,
.uartclk = CPUIMX51_QUART_XTAL,
.regshift = CPUIMX51_QUART_REGSHIFT,
@@ -260,6 +260,10 @@ static void __init eukrea_cpuimx51_init(void)
gpio_free(CPUIMX51_QUARTD_GPIO);
imx51_add_fec(NULL);
+ serial_platform_data[0].irq = gpio_to_irq(CPUIMX51_QUARTA_GPIO);
+ serial_platform_data[1].irq = gpio_to_irq(CPUIMX51_QUARTB_GPIO);
+ serial_platform_data[2].irq = gpio_to_irq(CPUIMX51_QUARTC_GPIO);
+ serial_platform_data[3].irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO);
platform_add_devices(devices, ARRAY_SIZE(devices));
imx51_add_imx_i2c(1, &eukrea_cpuimx51_i2c_data);
diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c
index 9fbe923..674fd10 100644
--- a/arch/arm/mach-mx5/board-cpuimx51sd.c
+++ b/arch/arm/mach-mx5/board-cpuimx51sd.c
@@ -126,7 +126,7 @@ static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = {
I2C_BOARD_INFO("tsc2007", 0x49),
.type = "tsc2007",
.platform_data = &tsc2007_info,
- .irq = IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO),
+ /* irq number is run-time assigned */
},
};
@@ -242,7 +242,7 @@ static struct spi_board_info cpuimx51sd_spi_device[] = {
.mode = SPI_MODE_0,
.chip_select = 0,
.platform_data = &mcp251x_info,
- .irq = IMX_GPIO_TO_IRQ(CAN_IRQGPIO)
+ /* irq number is run-time assigned */
},
};
@@ -288,6 +288,7 @@ static void __init eukrea_cpuimx51sd_init(void)
msleep(20);
gpio_set_value(CAN_RST, 1);
imx51_add_ecspi(0, &cpuimx51sd_ecspi1_pdata);
+ cpuimx51sd_spi_device[0].irq = gpio_to_irq(CAN_IRQGPIO);
spi_register_board_info(cpuimx51sd_spi_device,
ARRAY_SIZE(cpuimx51sd_spi_device));
@@ -295,6 +296,7 @@ static void __init eukrea_cpuimx51sd_init(void)
gpio_direction_input(TSC2007_IRQGPIO);
gpio_free(TSC2007_IRQGPIO);
+ eukrea_cpuimx51sd_i2c_devices[1].irq = gpio_to_irq(TSC2007_IRQGPIO);
i2c_register_board_info(0, eukrea_cpuimx51sd_i2c_devices,
ARRAY_SIZE(eukrea_cpuimx51sd_i2c_devices));
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-mx5/board-mx53_ard.c
index 5f224f1..4a24765 100644
--- a/arch/arm/mach-mx5/board-mx53_ard.c
+++ b/arch/arm/mach-mx5/board-mx53_ard.c
@@ -134,8 +134,7 @@ static struct resource ard_smsc911x_resources[] = {
.flags = IORESOURCE_MEM,
},
{
- .start = IMX_GPIO_TO_IRQ(ARD_ETHERNET_INT_B),
- .end = IMX_GPIO_TO_IRQ(ARD_ETHERNET_INT_B),
+ /* irq number is run-time assigned */
.flags = IORESOURCE_IRQ,
},
};
@@ -231,6 +230,8 @@ static void __init mx53_ard_board_init(void)
imx53_ard_common_init();
mx53_ard_io_init();
+ ard_smsc911x_resources[1].start = gpio_to_irq(ARD_ETHERNET_INT_B);
+ ard_smsc911x_resources[1].end = gpio_to_irq(ARD_ETHERNET_INT_B);
platform_add_devices(devices, ARRAY_SIZE(devices));
imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data);
diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
index a6a3ab8..2e686f2 100644
--- a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
+++ b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
@@ -159,7 +159,7 @@ struct tsc2007_platform_data tsc2007_data = {
static struct i2c_board_info mbimx51_i2c_devices[] = {
{
I2C_BOARD_INFO("tsc2007", 0x49),
- .irq = IMX_GPIO_TO_IRQ(MBIMX51_TSC2007_GPIO),
+ /* irq number is run-time assigned */
.platform_data = &tsc2007_data,
}, {
I2C_BOARD_INFO("tlv320aic23", 0x1a),
@@ -198,6 +198,7 @@ void __init eukrea_mbimx51_baseboard_init(void)
gpio_direction_input(MBIMX51_TSC2007_GPIO);
irq_set_irq_type(gpio_to_irq(MBIMX51_TSC2007_GPIO),
IRQF_TRIGGER_FALLING);
+ mbimx51_i2c_devices[0].irq = gpio_to_irq(MBIMX51_TSC2007_GPIO);
i2c_register_board_info(1, mbimx51_i2c_devices,
ARRAY_SIZE(mbimx51_i2c_devices));
diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c
index ec6ca91..ee870c4 100644
--- a/arch/arm/mach-mx5/mx51_efika.c
+++ b/arch/arm/mach-mx5/mx51_efika.c
@@ -587,7 +587,7 @@ static struct spi_board_info mx51_efika_spi_board_info[] __initdata = {
.bus_num = 0,
.chip_select = 0,
.platform_data = &mx51_efika_mc13892_data,
- .irq = IMX_GPIO_TO_IRQ(EFIKAMX_PMIC),
+ /* irq number is run-time assigned */
},
};
@@ -620,6 +620,7 @@ void __init efika_board_common_init(void)
gpio_request(EFIKAMX_PMIC, "pmic irq");
gpio_direction_input(EFIKAMX_PMIC);
+ mx51_efika_spi_board_info[1].irq = gpio_to_irq(EFIKAMX_PMIC);
spi_register_board_info(mx51_efika_spi_board_info,
ARRAY_SIZE(mx51_efika_spi_board_info));
imx51_add_ecspi(0, &mx51_efika_spi_pdata);
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index a599f01..f743a95 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -131,6 +131,4 @@
/* range e.g. GPIO_1_5 is gpio 5 under linux */
#define IMX_GPIO_NR(bank, nr) (((bank) - 1) * 32 + (nr))
-#define IMX_GPIO_TO_IRQ(gpio) (MXC_GPIO_IRQ_START + (gpio))
-
#endif /* __ASM_ARCH_MXC_HARDWARE_H__ */
--
1.7.5.4
More information about the linux-arm-kernel
mailing list