[PATCH v2 9/9] ARM: imx6q-sabrelite: add audmux support

[Shawn Guo]

On Thu, Feb 02, 2012 at 10:12:08AM +0800, Richard Zhao wrote:
> - enable audmux in dts
> - enable audmux in Kconfig
> 
> Signed-off-by: Richard Zhao <richard.zhao at linaro.org>
> ---
>  arch/arm/boot/dts/imx6q-sabrelite.dts |    4 ++++
>  arch/arm/boot/dts/imx6q.dtsi          |    2 ++
>  arch/arm/mach-imx/Kconfig             |    1 +
>  3 files changed, 7 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
> index 3a9d32c..5cd6698 100644
> --- a/arch/arm/boot/dts/imx6q-sabrelite.dts
> +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
> @@ -41,6 +41,10 @@
>  				status = "okay";
>  			};
>  
> +			audmux at 021d8000 {
> +				status = "okay";
> +			};
> +
>  			uart2: uart at 021e8000 {
>  				status = "okay";
>  			};
> diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
> index 263e8f3..b0ae495 100644
> --- a/arch/arm/boot/dts/imx6q.dtsi
> +++ b/arch/arm/boot/dts/imx6q.dtsi
> @@ -527,7 +527,9 @@
>  			};
>  
>  			audmux at 021d8000 {
> +				compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
>  				reg = <0x021d8000 0x4000>;
> +				status = "disabled";
>  			};
>  
>  			mipi at 021dc000 { /* MIPI-CSI */
> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> index 4defb97..1aec9c1 100644
> --- a/arch/arm/mach-imx/Kconfig
> +++ b/arch/arm/mach-imx/Kconfig
> @@ -835,6 +835,7 @@ comment "i.MX6 family:"
>  config SOC_IMX6Q
>  	bool "i.MX6 Quad support"
>  	select ARM_CPU_SUSPEND if PM
> +	select ARCH_MXC_AUDMUX_V2

The ARCH_MXC_AUDMUX_V2 has been removed by patch #7.  Why do you select
it here?

Regards,
Shawn

>  	select ARM_GIC
>  	select CPU_V7
>  	select HAVE_ARM_SCU
> -- 
> 1.7.5.4
> 
>