[PATCH v3 1/1] rc: Add support for GPIO based IR Receiver driver.

Ravi Kumar V kumarrav at codeaurora.org
Wed Feb 29 00:57:08 EST 2012


On 2/29/2012 1:59 AM, James Hogan wrote:
> On Tue, Feb 28, 2012 at 11:21:40AM +0530, Ravi Kumar V wrote:
>> Adds GPIO based IR Receiver driver. It decodes signals using decoders
>> available in rc framework.
>>
>> Signed-off-by: Ravi Kumar V<kumarrav at codeaurora.org>
>
> Looks good to me (but I'm no expert).
>
> Cheers
> James
>
Thanks for review and good suggestions

>>
>> diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
>> index aeb7f43..6f63ded 100644
>> --- a/drivers/media/rc/Kconfig
>> +++ b/drivers/media/rc/Kconfig
>> @@ -256,4 +256,13 @@ config RC_LOOPBACK
>>   	   To compile this driver as a module, choose M here: the module will
>>   	   be called rc_loopback.
>>
>> +config IR_GPIO_CIR
>> +	tristate "GPIO IR remote control"
>> +	depends on RC_CORE
>> +	---help---
>> +	   Say Y if you want to use GPIO based IR Receiver.
>> +
>> +	   To compile this driver as a module, choose M here: the module will
>> +	   be called gpio-ir-recv.
>> +
>>   endif #RC_CORE
>> diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
>> index 2156e78..9b3568e 100644
>> --- a/drivers/media/rc/Makefile
>> +++ b/drivers/media/rc/Makefile
>> @@ -25,3 +25,4 @@ obj-$(CONFIG_IR_REDRAT3) += redrat3.o
>>   obj-$(CONFIG_IR_STREAMZAP) += streamzap.o
>>   obj-$(CONFIG_IR_WINBOND_CIR) += winbond-cir.o
>>   obj-$(CONFIG_RC_LOOPBACK) += rc-loopback.o
>> +obj-$(CONFIG_IR_GPIO_CIR) += gpio-ir-recv.o
>> diff --git a/drivers/media/rc/gpio-ir-recv.c b/drivers/media/rc/gpio-ir-recv.c
>> new file mode 100644
>> index 0000000..6744479
>> --- /dev/null
>> +++ b/drivers/media/rc/gpio-ir-recv.c
>> @@ -0,0 +1,205 @@
>> +/* Copyright (c) 2012, Code Aurora Forum. All rights reserved.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 and
>> + * only version 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include<linux/kernel.h>
>> +#include<linux/init.h>
>> +#include<linux/module.h>
>> +#include<linux/interrupt.h>
>> +#include<linux/gpio.h>
>> +#include<linux/slab.h>
>> +#include<linux/platform_device.h>
>> +#include<linux/irq.h>
>> +#include<media/rc-core.h>
>> +#include<media/gpio-ir-recv.h>
>> +
>> +#define GPIO_IR_DRIVER_NAME	"gpio-rc-recv"
>> +#define GPIO_IR_DEVICE_NAME	"gpio_ir_recv"
>> +
>> +struct gpio_rc_dev {
>> +	struct rc_dev *rcdev;
>> +	unsigned int gpio_nr;
>> +	bool active_low;
>> +};
>> +
>> +static irqreturn_t gpio_ir_recv_irq(int irq, void *dev_id)
>> +{
>> +	struct gpio_rc_dev *gpio_dev = dev_id;
>> +	unsigned int gval;
>> +	int rc = 0;
>> +	enum raw_event_type type = IR_SPACE;
>> +
>> +	gval = gpio_get_value_cansleep(gpio_dev->gpio_nr);
>> +
>> +	if (gval<  0)
>> +		goto err_get_value;
>> +
>> +	if (gpio_dev->active_low)
>> +		gval = !gval;
>> +
>> +	if (gval == 1)
>> +		type = IR_PULSE;
>> +
>> +	rc = ir_raw_event_store_edge(gpio_dev->rcdev, type);
>> +	if (rc<  0)
>> +		goto err_get_value;
>> +
>> +	ir_raw_event_handle(gpio_dev->rcdev);
>> +
>> +err_get_value:
>> +	return IRQ_HANDLED;
>> +}
>> +
>> +static int __devinit gpio_ir_recv_probe(struct platform_device *pdev)
>> +{
>> +	struct gpio_rc_dev *gpio_dev;
>> +	struct rc_dev *rcdev;
>> +	const struct gpio_ir_recv_platform_data *pdata =
>> +					pdev->dev.platform_data;
>> +	int rc;
>> +
>> +	if (!pdata)
>> +		return -EINVAL;
>> +
>> +	if (pdata->gpio_nr<  0)
>> +		return -EINVAL;
>> +
>> +	gpio_dev = kzalloc(sizeof(struct gpio_rc_dev), GFP_KERNEL);
>> +	if (!gpio_dev)
>> +		return -ENOMEM;
>> +
>> +	rcdev = rc_allocate_device();
>> +	if (!rcdev) {
>> +		rc = -ENOMEM;
>> +		goto err_allocate_device;
>> +	}
>> +
>> +	rcdev->driver_type = RC_DRIVER_IR_RAW;
>> +	rcdev->allowed_protos = RC_TYPE_ALL;
>> +	rcdev->input_name = GPIO_IR_DEVICE_NAME;
>> +	rcdev->input_id.bustype = BUS_HOST;
>> +	rcdev->driver_name = GPIO_IR_DRIVER_NAME;
>> +	rcdev->map_name = RC_MAP_EMPTY;
>> +
>> +	gpio_dev->rcdev = rcdev;
>> +	gpio_dev->gpio_nr = pdata->gpio_nr;
>> +	gpio_dev->active_low = pdata->active_low;
>> +
>> +	rc = gpio_request(pdata->gpio_nr, "gpio-ir-recv");
>> +	if (rc<  0)
>> +		goto err_gpio_request;
>> +	rc  = gpio_direction_input(pdata->gpio_nr);
>> +	if (rc<  0)
>> +		goto err_gpio_direction_input;
>> +
>> +	rc = rc_register_device(rcdev);
>> +	if (rc<  0) {
>> +		dev_err(&pdev->dev, "failed to register rc device\n");
>> +		goto err_register_rc_device;
>> +	}
>> +
>> +	platform_set_drvdata(pdev, gpio_dev);
>> +
>> +	rc = request_any_context_irq(gpio_to_irq(pdata->gpio_nr),
>> +				gpio_ir_recv_irq,
>> +			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
>> +					"gpio-ir-recv-irq", gpio_dev);
>> +	if (rc<  0)
>> +		goto err_request_irq;
>> +
>> +	return 0;
>> +
>> +err_request_irq:
>> +	platform_set_drvdata(pdev, NULL);
>> +	rc_unregister_device(rcdev);
>> +err_register_rc_device:
>> +err_gpio_direction_input:
>> +	gpio_free(pdata->gpio_nr);
>> +err_gpio_request:
>> +	rc_free_device(rcdev);
>> +	rcdev = NULL;
>> +err_allocate_device:
>> +	kfree(gpio_dev);
>> +	return rc;
>> +}
>> +
>> +static int __devexit gpio_ir_recv_remove(struct platform_device *pdev)
>> +{
>> +	struct gpio_rc_dev *gpio_dev = platform_get_drvdata(pdev);
>> +
>> +	free_irq(gpio_to_irq(gpio_dev->gpio_nr), gpio_dev);
>> +	platform_set_drvdata(pdev, NULL);
>> +	rc_unregister_device(gpio_dev->rcdev);
>> +	gpio_free(gpio_dev->gpio_nr);
>> +	rc_free_device(gpio_dev->rcdev);
>> +	kfree(gpio_dev);
>> +	return 0;
>> +}
>> +
>> +#ifdef CONFIG_PM
>> +static int gpio_ir_recv_suspend(struct device *dev)
>> +{
>> +	struct platform_device *pdev = to_platform_device(dev);
>> +	struct gpio_rc_dev *gpio_dev = platform_get_drvdata(pdev);
>> +
>> +	if (device_may_wakeup(dev))
>> +		enable_irq_wake(gpio_to_irq(gpio_dev->gpio_nr));
>> +	else
>> +		disable_irq(gpio_to_irq(gpio_dev->gpio_nr));
>> +
>> +	return 0;
>> +}
>> +
>> +static int gpio_ir_recv_resume(struct device *dev)
>> +{
>> +	struct platform_device *pdev = to_platform_device(dev);
>> +	struct gpio_rc_dev *gpio_dev = platform_get_drvdata(pdev);
>> +
>> +	if (device_may_wakeup(dev))
>> +		disable_irq_wake(gpio_to_irq(gpio_dev->gpio_nr));
>> +	else
>> +		enable_irq(gpio_to_irq(gpio_dev->gpio_nr));
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct dev_pm_ops gpio_ir_recv_pm_ops = {
>> +	.suspend        = gpio_ir_recv_suspend,
>> +	.resume         = gpio_ir_recv_resume,
>> +};
>> +#endif
>> +
>> +static struct platform_driver gpio_ir_recv_driver = {
>> +	.probe  = gpio_ir_recv_probe,
>> +	.remove = __devexit_p(gpio_ir_recv_remove),
>> +	.driver = {
>> +		.name   = GPIO_IR_DRIVER_NAME,
>> +		.owner  = THIS_MODULE,
>> +#ifdef CONFIG_PM
>> +		.pm	=&gpio_ir_recv_pm_ops,
>> +#endif
>> +	},
>> +};
>> +
>> +static int __init gpio_ir_recv_init(void)
>> +{
>> +	return platform_driver_register(&gpio_ir_recv_driver);
>> +}
>> +module_init(gpio_ir_recv_init);
>> +
>> +static void __exit gpio_ir_recv_exit(void)
>> +{
>> +	platform_driver_unregister(&gpio_ir_recv_driver);
>> +}
>> +module_exit(gpio_ir_recv_exit);
>> +
>> +MODULE_DESCRIPTION("GPIO IR Receiver driver");
>> +MODULE_LICENSE("GPL v2");
>> diff --git a/include/media/gpio-ir-recv.h b/include/media/gpio-ir-recv.h
>> new file mode 100644
>> index 0000000..61a7fbb
>> --- /dev/null
>> +++ b/include/media/gpio-ir-recv.h
>> @@ -0,0 +1,22 @@
>> +/* Copyright (c) 2012, Code Aurora Forum. All rights reserved.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 and
>> + * only version 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#ifndef __GPIO_IR_RECV_H__
>> +#define __GPIO_IR_RECV_H__
>> +
>> +struct gpio_ir_recv_platform_data {
>> +	unsigned int gpio_nr;
>> +	bool active_low;
>> +};
>> +
>> +#endif /* __GPIO_IR_RECV_H__ */
>> +
>> --
>> Sent by a consultant of the Qualcomm Innovation Center, Inc.
>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>> the body of a message to majordomo at vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>> Please read the FAQ at  http://www.tux.org/lkml/
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel


-- 
Sent by a consultant of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.



More information about the linux-arm-kernel mailing list