[PATCH v3 1/1] rc: Add support for GPIO based IR Receiver driver.
James Hogan
james at albanarts.com
Tue Feb 28 15:29:45 EST 2012
On Tue, Feb 28, 2012 at 11:21:40AM +0530, Ravi Kumar V wrote:
> Adds GPIO based IR Receiver driver. It decodes signals using decoders
> available in rc framework.
>
> Signed-off-by: Ravi Kumar V <kumarrav at codeaurora.org>
Looks good to me (but I'm no expert).
Cheers
James
> ---
> drivers/media/rc/Kconfig | 9 ++
> drivers/media/rc/Makefile | 1 +
> drivers/media/rc/gpio-ir-recv.c | 205 +++++++++++++++++++++++++++++++++++++++
> include/media/gpio-ir-recv.h | 22 ++++
> 4 files changed, 237 insertions(+), 0 deletions(-)
> create mode 100644 drivers/media/rc/gpio-ir-recv.c
> create mode 100644 include/media/gpio-ir-recv.h
>
> diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
> index aeb7f43..6f63ded 100644
> --- a/drivers/media/rc/Kconfig
> +++ b/drivers/media/rc/Kconfig
> @@ -256,4 +256,13 @@ config RC_LOOPBACK
> To compile this driver as a module, choose M here: the module will
> be called rc_loopback.
>
> +config IR_GPIO_CIR
> + tristate "GPIO IR remote control"
> + depends on RC_CORE
> + ---help---
> + Say Y if you want to use GPIO based IR Receiver.
> +
> + To compile this driver as a module, choose M here: the module will
> + be called gpio-ir-recv.
> +
> endif #RC_CORE
> diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
> index 2156e78..9b3568e 100644
> --- a/drivers/media/rc/Makefile
> +++ b/drivers/media/rc/Makefile
> @@ -25,3 +25,4 @@ obj-$(CONFIG_IR_REDRAT3) += redrat3.o
> obj-$(CONFIG_IR_STREAMZAP) += streamzap.o
> obj-$(CONFIG_IR_WINBOND_CIR) += winbond-cir.o
> obj-$(CONFIG_RC_LOOPBACK) += rc-loopback.o
> +obj-$(CONFIG_IR_GPIO_CIR) += gpio-ir-recv.o
> diff --git a/drivers/media/rc/gpio-ir-recv.c b/drivers/media/rc/gpio-ir-recv.c
> new file mode 100644
> index 0000000..6744479
> --- /dev/null
> +++ b/drivers/media/rc/gpio-ir-recv.c
> @@ -0,0 +1,205 @@
> +/* Copyright (c) 2012, Code Aurora Forum. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/interrupt.h>
> +#include <linux/gpio.h>
> +#include <linux/slab.h>
> +#include <linux/platform_device.h>
> +#include <linux/irq.h>
> +#include <media/rc-core.h>
> +#include <media/gpio-ir-recv.h>
> +
> +#define GPIO_IR_DRIVER_NAME "gpio-rc-recv"
> +#define GPIO_IR_DEVICE_NAME "gpio_ir_recv"
> +
> +struct gpio_rc_dev {
> + struct rc_dev *rcdev;
> + unsigned int gpio_nr;
> + bool active_low;
> +};
> +
> +static irqreturn_t gpio_ir_recv_irq(int irq, void *dev_id)
> +{
> + struct gpio_rc_dev *gpio_dev = dev_id;
> + unsigned int gval;
> + int rc = 0;
> + enum raw_event_type type = IR_SPACE;
> +
> + gval = gpio_get_value_cansleep(gpio_dev->gpio_nr);
> +
> + if (gval < 0)
> + goto err_get_value;
> +
> + if (gpio_dev->active_low)
> + gval = !gval;
> +
> + if (gval == 1)
> + type = IR_PULSE;
> +
> + rc = ir_raw_event_store_edge(gpio_dev->rcdev, type);
> + if (rc < 0)
> + goto err_get_value;
> +
> + ir_raw_event_handle(gpio_dev->rcdev);
> +
> +err_get_value:
> + return IRQ_HANDLED;
> +}
> +
> +static int __devinit gpio_ir_recv_probe(struct platform_device *pdev)
> +{
> + struct gpio_rc_dev *gpio_dev;
> + struct rc_dev *rcdev;
> + const struct gpio_ir_recv_platform_data *pdata =
> + pdev->dev.platform_data;
> + int rc;
> +
> + if (!pdata)
> + return -EINVAL;
> +
> + if (pdata->gpio_nr < 0)
> + return -EINVAL;
> +
> + gpio_dev = kzalloc(sizeof(struct gpio_rc_dev), GFP_KERNEL);
> + if (!gpio_dev)
> + return -ENOMEM;
> +
> + rcdev = rc_allocate_device();
> + if (!rcdev) {
> + rc = -ENOMEM;
> + goto err_allocate_device;
> + }
> +
> + rcdev->driver_type = RC_DRIVER_IR_RAW;
> + rcdev->allowed_protos = RC_TYPE_ALL;
> + rcdev->input_name = GPIO_IR_DEVICE_NAME;
> + rcdev->input_id.bustype = BUS_HOST;
> + rcdev->driver_name = GPIO_IR_DRIVER_NAME;
> + rcdev->map_name = RC_MAP_EMPTY;
> +
> + gpio_dev->rcdev = rcdev;
> + gpio_dev->gpio_nr = pdata->gpio_nr;
> + gpio_dev->active_low = pdata->active_low;
> +
> + rc = gpio_request(pdata->gpio_nr, "gpio-ir-recv");
> + if (rc < 0)
> + goto err_gpio_request;
> + rc = gpio_direction_input(pdata->gpio_nr);
> + if (rc < 0)
> + goto err_gpio_direction_input;
> +
> + rc = rc_register_device(rcdev);
> + if (rc < 0) {
> + dev_err(&pdev->dev, "failed to register rc device\n");
> + goto err_register_rc_device;
> + }
> +
> + platform_set_drvdata(pdev, gpio_dev);
> +
> + rc = request_any_context_irq(gpio_to_irq(pdata->gpio_nr),
> + gpio_ir_recv_irq,
> + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
> + "gpio-ir-recv-irq", gpio_dev);
> + if (rc < 0)
> + goto err_request_irq;
> +
> + return 0;
> +
> +err_request_irq:
> + platform_set_drvdata(pdev, NULL);
> + rc_unregister_device(rcdev);
> +err_register_rc_device:
> +err_gpio_direction_input:
> + gpio_free(pdata->gpio_nr);
> +err_gpio_request:
> + rc_free_device(rcdev);
> + rcdev = NULL;
> +err_allocate_device:
> + kfree(gpio_dev);
> + return rc;
> +}
> +
> +static int __devexit gpio_ir_recv_remove(struct platform_device *pdev)
> +{
> + struct gpio_rc_dev *gpio_dev = platform_get_drvdata(pdev);
> +
> + free_irq(gpio_to_irq(gpio_dev->gpio_nr), gpio_dev);
> + platform_set_drvdata(pdev, NULL);
> + rc_unregister_device(gpio_dev->rcdev);
> + gpio_free(gpio_dev->gpio_nr);
> + rc_free_device(gpio_dev->rcdev);
> + kfree(gpio_dev);
> + return 0;
> +}
> +
> +#ifdef CONFIG_PM
> +static int gpio_ir_recv_suspend(struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct gpio_rc_dev *gpio_dev = platform_get_drvdata(pdev);
> +
> + if (device_may_wakeup(dev))
> + enable_irq_wake(gpio_to_irq(gpio_dev->gpio_nr));
> + else
> + disable_irq(gpio_to_irq(gpio_dev->gpio_nr));
> +
> + return 0;
> +}
> +
> +static int gpio_ir_recv_resume(struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct gpio_rc_dev *gpio_dev = platform_get_drvdata(pdev);
> +
> + if (device_may_wakeup(dev))
> + disable_irq_wake(gpio_to_irq(gpio_dev->gpio_nr));
> + else
> + enable_irq(gpio_to_irq(gpio_dev->gpio_nr));
> +
> + return 0;
> +}
> +
> +static const struct dev_pm_ops gpio_ir_recv_pm_ops = {
> + .suspend = gpio_ir_recv_suspend,
> + .resume = gpio_ir_recv_resume,
> +};
> +#endif
> +
> +static struct platform_driver gpio_ir_recv_driver = {
> + .probe = gpio_ir_recv_probe,
> + .remove = __devexit_p(gpio_ir_recv_remove),
> + .driver = {
> + .name = GPIO_IR_DRIVER_NAME,
> + .owner = THIS_MODULE,
> +#ifdef CONFIG_PM
> + .pm = &gpio_ir_recv_pm_ops,
> +#endif
> + },
> +};
> +
> +static int __init gpio_ir_recv_init(void)
> +{
> + return platform_driver_register(&gpio_ir_recv_driver);
> +}
> +module_init(gpio_ir_recv_init);
> +
> +static void __exit gpio_ir_recv_exit(void)
> +{
> + platform_driver_unregister(&gpio_ir_recv_driver);
> +}
> +module_exit(gpio_ir_recv_exit);
> +
> +MODULE_DESCRIPTION("GPIO IR Receiver driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/media/gpio-ir-recv.h b/include/media/gpio-ir-recv.h
> new file mode 100644
> index 0000000..61a7fbb
> --- /dev/null
> +++ b/include/media/gpio-ir-recv.h
> @@ -0,0 +1,22 @@
> +/* Copyright (c) 2012, Code Aurora Forum. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef __GPIO_IR_RECV_H__
> +#define __GPIO_IR_RECV_H__
> +
> +struct gpio_ir_recv_platform_data {
> + unsigned int gpio_nr;
> + bool active_low;
> +};
> +
> +#endif /* __GPIO_IR_RECV_H__ */
> +
> --
> Sent by a consultant of the Qualcomm Innovation Center, Inc.
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
More information about the linux-arm-kernel
mailing list