[PATCH v3 0/2] regulator: add irq domain and device tree support for MAX8997
thomas.abraham at linaro.org
Thu Feb 23 07:38:06 EST 2012
Changes since v2:
- Atleast one voltage level has to be specfied for Buck 1/2/5 even if GPIO
DVS option is not used (suggested by MyungJoo Ham).
- Reworked the irq_domain support based the v5 of irq_domain generalization
MAX8997 is a multi-function device which includes support for regulators, rtc,
battery charger and other sub-blocks. This patchset adds device tree support
for the pmic (regulators) sub-block.
The first patch adds irq domain support for the interrupts supported by max8997
mainly for removing the need to pass a irq_base from the platform code. The
irq_base could not anyway be passed in case of device tree based instantiation.
The reverse mapping method used is linear since the sub-drivers of max8997 has
access to the max8997 irq_domain from which the linux irq number can be
The second patch adds device tree support for max8997. This patch modifies both
mfd and regulator portions of the max8997 code.
This patchset is based on the following tree.
with all patches merged from
and depends on the following patchset.
[PATCH v3 0/4] ARM: Exynos4: Add irq domain and device tree support for wakeup interrupts.
This patchset has been tested on Origen board.
Thomas Abraham (2):
mfd: add irq domain support for max8997 interrupts
regulator: add device tree support for max8997
.../devicetree/bindings/regulator/max8997-pmic.txt | 134 +++++++++++++++++++
arch/arm/mach-exynos/mach-nuri.c | 4 -
arch/arm/mach-exynos/mach-origen.c | 1 -
drivers/mfd/max8997-irq.c | 60 +++++----
drivers/mfd/max8997.c | 73 ++++++++++-
drivers/regulator/max8997.c | 139 +++++++++++++++++++-
include/linux/mfd/max8997-private.h | 4 +-
include/linux/mfd/max8997.h | 2 +-
8 files changed, 382 insertions(+), 35 deletions(-)
create mode 100644 Documentation/devicetree/bindings/regulator/max8997-pmic.txt
More information about the linux-arm-kernel