[PATCH 1/5] gpio/omap: Remove bank->id information and misc cleanup
DebBarma, Tarun Kanti
tarun.kanti at ti.com
Thu Feb 16 00:53:47 EST 2012
On Wed, Feb 15, 2012 at 9:34 PM, Benoit Cousson <b-cousson at ti.com> wrote:
> The driver does not need anymore any id to identify the GPIO instance.
> Remove every occurence of the bank->id inside the driver.
>
> Remove two trailing spaces.
> Add a dev variable for better readability in probe.
> Remove unused variable bank->pbase.
>
> Signed-off-by: Benoit Cousson <b-cousson at ti.com>
> Cc: Tarun Kanti DebBarma <tarun.kanti at ti.com>
Looks fine.
If needed you can add my Acked-by:
--
Tarun
> ---
> drivers/gpio/gpio-omap.c | 23 +++++++++--------------
> 1 files changed, 9 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
> index f49bd6f..a0c3e03 100644
> --- a/drivers/gpio/gpio-omap.c
> +++ b/drivers/gpio/gpio-omap.c
> @@ -50,7 +50,6 @@ struct gpio_regs {
>
> struct gpio_bank {
> struct list_head node;
> - unsigned long pbase;
> void __iomem *base;
> u16 irq;
> u16 virtual_irq_start;
> @@ -77,7 +76,6 @@ struct gpio_bank {
> int stride;
> u32 width;
> int context_loss_count;
> - u16 id;
> int power_mode;
> bool workaround_enabled;
>
> @@ -155,7 +153,7 @@ static inline void _gpio_rmw(void __iomem *base, u32 reg, u32 mask, bool set)
> {
> int l = __raw_readl(base + reg);
>
> - if (set)
> + if (set)
> l |= mask;
> else
> l &= ~mask;
> @@ -495,7 +493,7 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
> unsigned long flags;
>
> if (bank->non_wakeup_gpios & gpio_bit) {
> - dev_err(bank->dev,
> + dev_err(bank->dev,
> "Unable to modify wakeup on non-wakeup GPIO%d\n", gpio);
> return -EINVAL;
> }
> @@ -1048,37 +1046,36 @@ static void __devinit omap_gpio_chip_init(struct gpio_bank *bank)
>
> static int __devinit omap_gpio_probe(struct platform_device *pdev)
> {
> + struct device *dev = &pdev->dev;
> struct omap_gpio_platform_data *pdata;
> struct resource *res;
> struct gpio_bank *bank;
> int ret = 0;
>
> - if (!pdev->dev.platform_data) {
> + if (!dev->platform_data) {
> ret = -EINVAL;
> goto err_exit;
> }
>
> bank = kzalloc(sizeof(struct gpio_bank), GFP_KERNEL);
> if (!bank) {
> - dev_err(&pdev->dev, "Memory alloc failed for gpio_bank\n");
> + dev_err(dev, "Memory alloc failed\n");
> ret = -ENOMEM;
> goto err_exit;
> }
>
> res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> if (unlikely(!res)) {
> - dev_err(&pdev->dev, "GPIO Bank %i Invalid IRQ resource\n",
> - pdev->id);
> + dev_err(dev, "Invalid IRQ resource\n");
> ret = -ENODEV;
> goto err_free;
> }
>
> bank->irq = res->start;
> - bank->id = pdev->id;
>
> pdata = pdev->dev.platform_data;
> bank->virtual_irq_start = pdata->virtual_irq_start;
> - bank->dev = &pdev->dev;
> + bank->dev = dev;
> bank->dbck_flag = pdata->dbck_flag;
> bank->stride = pdata->bank_stride;
> bank->width = pdata->bank_width;
> @@ -1098,16 +1095,14 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev)
> /* Static mapping, never released */
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> if (unlikely(!res)) {
> - dev_err(&pdev->dev, "GPIO Bank %i Invalid mem resource\n",
> - pdev->id);
> + dev_err(dev, "Invalid mem resource\n");
> ret = -ENODEV;
> goto err_free;
> }
>
> bank->base = ioremap(res->start, resource_size(res));
> if (!bank->base) {
> - dev_err(&pdev->dev, "Could not ioremap gpio bank%i\n",
> - pdev->id);
> + dev_err(dev, "Could not ioremap\n");
> ret = -ENOMEM;
> goto err_free;
> }
> --
> 1.7.0.4
>
More information about the linux-arm-kernel
mailing list