[PATCH 1/5] gpio/omap: Remove bank->id information and misc cleanup
Cousson, Benoit
b-cousson at ti.com
Thu Feb 16 04:33:57 EST 2012
On 2/16/2012 6:53 AM, DebBarma, Tarun Kanti wrote:
> On Wed, Feb 15, 2012 at 9:34 PM, Benoit Cousson<b-cousson at ti.com> wrote:
>> The driver does not need anymore any id to identify the GPIO instance.
>> Remove every occurence of the bank->id inside the driver.
>>
>> Remove two trailing spaces.
>> Add a dev variable for better readability in probe.
>> Remove unused variable bank->pbase.
>>
>> Signed-off-by: Benoit Cousson<b-cousson at ti.com>
>> Cc: Tarun Kanti DebBarma<tarun.kanti at ti.com>
> Looks fine.
> If needed you can add my Acked-by:
Thanks,
Benoit
> --
> Tarun
>
>> ---
>> drivers/gpio/gpio-omap.c | 23 +++++++++--------------
>> 1 files changed, 9 insertions(+), 14 deletions(-)
>>
>> diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
>> index f49bd6f..a0c3e03 100644
>> --- a/drivers/gpio/gpio-omap.c
>> +++ b/drivers/gpio/gpio-omap.c
>> @@ -50,7 +50,6 @@ struct gpio_regs {
>>
>> struct gpio_bank {
>> struct list_head node;
>> - unsigned long pbase;
>> void __iomem *base;
>> u16 irq;
>> u16 virtual_irq_start;
>> @@ -77,7 +76,6 @@ struct gpio_bank {
>> int stride;
>> u32 width;
>> int context_loss_count;
>> - u16 id;
>> int power_mode;
>> bool workaround_enabled;
>>
>> @@ -155,7 +153,7 @@ static inline void _gpio_rmw(void __iomem *base, u32 reg, u32 mask, bool set)
>> {
>> int l = __raw_readl(base + reg);
>>
>> - if (set)
>> + if (set)
>> l |= mask;
>> else
>> l&= ~mask;
>> @@ -495,7 +493,7 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
>> unsigned long flags;
>>
>> if (bank->non_wakeup_gpios& gpio_bit) {
>> - dev_err(bank->dev,
>> + dev_err(bank->dev,
>> "Unable to modify wakeup on non-wakeup GPIO%d\n", gpio);
>> return -EINVAL;
>> }
>> @@ -1048,37 +1046,36 @@ static void __devinit omap_gpio_chip_init(struct gpio_bank *bank)
>>
>> static int __devinit omap_gpio_probe(struct platform_device *pdev)
>> {
>> + struct device *dev =&pdev->dev;
>> struct omap_gpio_platform_data *pdata;
>> struct resource *res;
>> struct gpio_bank *bank;
>> int ret = 0;
>>
>> - if (!pdev->dev.platform_data) {
>> + if (!dev->platform_data) {
>> ret = -EINVAL;
>> goto err_exit;
>> }
>>
>> bank = kzalloc(sizeof(struct gpio_bank), GFP_KERNEL);
>> if (!bank) {
>> - dev_err(&pdev->dev, "Memory alloc failed for gpio_bank\n");
>> + dev_err(dev, "Memory alloc failed\n");
>> ret = -ENOMEM;
>> goto err_exit;
>> }
>>
>> res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
>> if (unlikely(!res)) {
>> - dev_err(&pdev->dev, "GPIO Bank %i Invalid IRQ resource\n",
>> - pdev->id);
>> + dev_err(dev, "Invalid IRQ resource\n");
>> ret = -ENODEV;
>> goto err_free;
>> }
>>
>> bank->irq = res->start;
>> - bank->id = pdev->id;
>>
>> pdata = pdev->dev.platform_data;
>> bank->virtual_irq_start = pdata->virtual_irq_start;
>> - bank->dev =&pdev->dev;
>> + bank->dev = dev;
>> bank->dbck_flag = pdata->dbck_flag;
>> bank->stride = pdata->bank_stride;
>> bank->width = pdata->bank_width;
>> @@ -1098,16 +1095,14 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev)
>> /* Static mapping, never released */
>> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> if (unlikely(!res)) {
>> - dev_err(&pdev->dev, "GPIO Bank %i Invalid mem resource\n",
>> - pdev->id);
>> + dev_err(dev, "Invalid mem resource\n");
>> ret = -ENODEV;
>> goto err_free;
>> }
>>
>> bank->base = ioremap(res->start, resource_size(res));
>> if (!bank->base) {
>> - dev_err(&pdev->dev, "Could not ioremap gpio bank%i\n",
>> - pdev->id);
>> + dev_err(dev, "Could not ioremap\n");
>> ret = -ENOMEM;
>> goto err_free;
>> }
>> --
>> 1.7.0.4
>>
More information about the linux-arm-kernel
mailing list