[PATCH 1/4] ARM: sa1100: fix sa1100 after sparse irq conversion
Rob Herring
robherring2 at gmail.com
Thu Feb 16 22:32:11 EST 2012
From: Rob Herring <rob.herring at calxeda.com>
SA1100 was converted to sparse irq in parallel with include of mach/irqs.h
being removed from asm/irq.h when sparse irq is enabled, resulting in lots
of compile errors.
Signed-off-by: Rob Herring <rob.herring at calxeda.com>
---
arch/arm/mach-sa1100/assabet.c | 2 ++
arch/arm/mach-sa1100/badge4.c | 1 +
arch/arm/mach-sa1100/cerf.c | 2 ++
arch/arm/mach-sa1100/collie.c | 2 ++
arch/arm/mach-sa1100/generic.c | 4 +++-
arch/arm/mach-sa1100/h3100.c | 2 ++
arch/arm/mach-sa1100/h3600.c | 2 ++
arch/arm/mach-sa1100/hackkit.c | 5 ++++-
arch/arm/mach-sa1100/include/mach/irqs.h | 2 +-
arch/arm/mach-sa1100/irq.c | 1 +
arch/arm/mach-sa1100/jornada720.c | 5 ++++-
arch/arm/mach-sa1100/lart.c | 2 ++
arch/arm/mach-sa1100/nanoengine.c | 2 ++
arch/arm/mach-sa1100/neponset.c | 1 +
arch/arm/mach-sa1100/pleb.c | 1 +
arch/arm/mach-sa1100/shannon.c | 2 ++
arch/arm/mach-sa1100/simpad.c | 2 ++
arch/arm/mach-sa1100/ssp.c | 1 +
arch/arm/mach-sa1100/time.c | 1 +
drivers/gpio/gpio-sa1100.c | 1 +
drivers/net/ethernet/smsc/smc91x.c | 4 ++++
drivers/tty/serial/sa1100.c | 1 +
22 files changed, 42 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index e708a93..25c662d 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -39,6 +39,7 @@
#include <asm/mach/serial_sa1100.h>
#include <mach/assabet.h>
#include <mach/mcp.h>
+#include <mach/irqs.h>
#include "generic.h"
@@ -534,6 +535,7 @@ MACHINE_START(ASSABET, "Intel-Assabet")
.atag_offset = 0x100,
.fixup = fixup_assabet,
.map_io = assabet_map_io,
+ .nr_irqs = SA1100_NR_IRQS,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = assabet_init,
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index 266ec0f..e0f0c03 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -303,6 +303,7 @@ static void __init badge4_map_io(void)
MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4")
.atag_offset = 0x100,
.map_io = badge4_map_io,
+ .nr_irqs = SA1100_NR_IRQS,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
#ifdef CONFIG_SA1111
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index 8015604..6a925de 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -30,6 +30,7 @@
#include <mach/cerf.h>
#include <mach/mcp.h>
+#include <mach/irqs.h>
#include "generic.h"
static struct resource cerfuart2_resources[] = {
@@ -130,6 +131,7 @@ static void __init cerf_init(void)
MACHINE_START(CERF, "Intrinsyc CerfBoard/CerfCube")
/* Maintainer: support at intrinsyc.com */
.map_io = cerf_map_io,
+ .nr_irqs = SA1100_NR_IRQS,
.init_irq = cerf_init_irq,
.timer = &sa1100_timer,
.init_machine = cerf_init,
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index d4339d6..6e5ab42 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -47,6 +47,7 @@
#include <asm/mach/sharpsl_param.h>
#include <asm/hardware/locomo.h>
#include <mach/mcp.h>
+#include <mach/irqs.h>
#include "generic.h"
@@ -393,6 +394,7 @@ static void __init collie_map_io(void)
MACHINE_START(COLLIE, "Sharp-Collie")
.map_io = collie_map_io,
+ .nr_irqs = SA1100_NR_IRQS,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = collie_init,
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 97e9bdf..b184704 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -23,12 +23,14 @@
#include <video/sa1100fb.h>
#include <asm/div64.h>
-#include <mach/hardware.h>
#include <asm/system.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
#include "generic.h"
unsigned int reset_status;
diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c
index f23e7d0..b2e8d0f 100644
--- a/arch/arm/mach-sa1100/h3100.c
+++ b/arch/arm/mach-sa1100/h3100.c
@@ -21,6 +21,7 @@
#include <asm/mach/irda.h>
#include <mach/h3xxx.h>
+#include <mach/irqs.h>
#include "generic.h"
@@ -105,6 +106,7 @@ static void __init h3100_mach_init(void)
MACHINE_START(H3100, "Compaq iPAQ H3100")
.atag_offset = 0x100,
.map_io = h3100_map_io,
+ .nr_irqs = SA1100_NR_IRQS,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = h3100_mach_init,
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 2feac56..cb6659f 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -21,6 +21,7 @@
#include <asm/mach/irda.h>
#include <mach/h3xxx.h>
+#include <mach/irqs.h>
#include "generic.h"
@@ -155,6 +156,7 @@ static void __init h3600_mach_init(void)
MACHINE_START(H3600, "Compaq iPAQ H3600")
.atag_offset = 0x100,
.map_io = h3600_map_io,
+ .nr_irqs = SA1100_NR_IRQS,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = h3600_mach_init,
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index 37d381a..55052e4 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -22,7 +22,6 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
#include <asm/page.h>
@@ -35,6 +34,9 @@
#include <asm/mach/irq.h>
#include <asm/mach/serial_sa1100.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
#include "generic.h"
/**********************************************************************
@@ -194,6 +196,7 @@ static void __init hackkit_init(void)
MACHINE_START(HACKKIT, "HackKit Cpu Board")
.atag_offset = 0x100,
.map_io = hackkit_map_io,
+ .nr_irqs = SA1100_NR_IRQS,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = hackkit_init,
diff --git a/arch/arm/mach-sa1100/include/mach/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h
index db0699a..ce3bb03 100644
--- a/arch/arm/mach-sa1100/include/mach/irqs.h
+++ b/arch/arm/mach-sa1100/include/mach/irqs.h
@@ -83,4 +83,4 @@
#define NR_IRQS_LOCOMO 0
#endif
-#define NR_IRQS (IRQ_BOARD_START + NR_IRQS_LOCOMO)
+#define SA1100_NR_IRQS (IRQ_BOARD_START + NR_IRQS_LOCOMO)
diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c
index 5d12a30..516ccc2 100644
--- a/arch/arm/mach-sa1100/irq.c
+++ b/arch/arm/mach-sa1100/irq.c
@@ -17,6 +17,7 @@
#include <linux/syscore_ops.h>
#include <mach/hardware.h>
+#include <mach/irqs.h>
#include <asm/mach/irq.h>
#include "generic.h"
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 0c9a0bd..cfcaaef 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -23,7 +23,6 @@
#include <linux/mtd/partitions.h>
#include <video/s1d13xxxfb.h>
-#include <mach/hardware.h>
#include <asm/hardware/sa1111.h>
#include <asm/irq.h>
#include <asm/page.h>
@@ -34,6 +33,9 @@
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
#include "generic.h"
/*
@@ -343,6 +345,7 @@ MACHINE_START(JORNADA720, "HP Jornada 720")
/* Maintainer: Kristoffer Ericson <Kristoffer.Ericson at gmail.com> */
.atag_offset = 0x100,
.map_io = jornada720_map_io,
+ .nr_irqs = SA1100_NR_IRQS,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = jornada720_mach_init,
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index 570f75f..eb6534e 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -17,6 +17,7 @@
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
#include <mach/mcp.h>
+#include <mach/irqs.h>
#include "generic.h"
@@ -143,6 +144,7 @@ static void __init lart_map_io(void)
MACHINE_START(LART, "LART")
.atag_offset = 0x100,
.map_io = lart_map_io,
+ .nr_irqs = SA1100_NR_IRQS,
.init_irq = sa1100_init_irq,
.init_machine = lart_init,
.timer = &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c
index 3923911..8f6446b 100644
--- a/arch/arm/mach-sa1100/nanoengine.c
+++ b/arch/arm/mach-sa1100/nanoengine.c
@@ -28,6 +28,7 @@
#include <mach/hardware.h>
#include <mach/nanoengine.h>
+#include <mach/irqs.h>
#include "generic.h"
@@ -107,6 +108,7 @@ static void __init nanoengine_init(void)
MACHINE_START(NANOENGINE, "BSE nanoEngine")
.atag_offset = 0x100,
.map_io = nanoengine_map_io,
+ .nr_irqs = SA1100_NR_IRQS,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = nanoengine_init,
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index 3e43af4..6c58f01 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -21,6 +21,7 @@
#include <mach/hardware.h>
#include <mach/assabet.h>
#include <mach/neponset.h>
+#include <mach/irqs.h>
#define NEP_IRQ_SMC91X 0
#define NEP_IRQ_USAR 1
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
index ca5d33b..1602575 100644
--- a/arch/arm/mach-sa1100/pleb.c
+++ b/arch/arm/mach-sa1100/pleb.c
@@ -131,6 +131,7 @@ static void __init pleb_map_io(void)
MACHINE_START(PLEB, "PLEB")
.map_io = pleb_map_io,
+ .nr_irqs = SA1100_NR_IRQS,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = pleb_init,
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 08bb122..ca8bf59 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -21,6 +21,7 @@
#include <asm/mach/serial_sa1100.h>
#include <mach/mcp.h>
#include <mach/shannon.h>
+#include <mach/irqs.h>
#include "generic.h"
@@ -99,6 +100,7 @@ static void __init shannon_map_io(void)
MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)")
.atag_offset = 0x100,
.map_io = shannon_map_io,
+ .nr_irqs = SA1100_NR_IRQS,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = shannon_init,
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index 255c37d..0a08d71 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -27,6 +27,7 @@
#include <asm/mach/serial_sa1100.h>
#include <mach/mcp.h>
#include <mach/simpad.h>
+#include <mach/irqs.h>
#include <linux/serial_core.h>
#include <linux/ioport.h>
@@ -393,6 +394,7 @@ MACHINE_START(SIMPAD, "Simpad")
/* Maintainer: Holger Freyther */
.atag_offset = 0x100,
.map_io = simpad_map_io,
+ .nr_irqs = SA1100_NR_IRQS,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.restart = sa11x0_restart,
diff --git a/arch/arm/mach-sa1100/ssp.c b/arch/arm/mach-sa1100/ssp.c
index b20ff93..1c14617 100644
--- a/arch/arm/mach-sa1100/ssp.c
+++ b/arch/arm/mach-sa1100/ssp.c
@@ -21,6 +21,7 @@
#include <asm/irq.h>
#include <mach/hardware.h>
+#include <mach/irqs.h>
#include <asm/hardware/ssp.h>
#define TIMEOUT 100000
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index 69e3353..6af26e8 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -18,6 +18,7 @@
#include <asm/mach/time.h>
#include <asm/sched_clock.h>
#include <mach/hardware.h>
+#include <mach/irqs.h>
static u32 notrace sa1100_read_sched_clock(void)
{
diff --git a/drivers/gpio/gpio-sa1100.c b/drivers/gpio/gpio-sa1100.c
index 7eecf69..8ea3b33 100644
--- a/drivers/gpio/gpio-sa1100.c
+++ b/drivers/gpio/gpio-sa1100.c
@@ -12,6 +12,7 @@
#include <linux/module.h>
#include <mach/hardware.h>
+#include <mach/irqs.h>
static int sa1100_gpio_get(struct gpio_chip *chip, unsigned offset)
{
diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c
index 0dba050..0c16c0a 100644
--- a/drivers/net/ethernet/smsc/smc91x.c
+++ b/drivers/net/ethernet/smsc/smc91x.c
@@ -89,6 +89,10 @@ static const char version[] =
#include <asm/io.h>
+#if defined(CONFIG_SA1100_ASSABET)
+#include <mach/neponset.h>
+#endif
+
#include "smc91x.h"
#ifndef SMC_NOWAIT
diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c
index ef7a21a..2ca5959 100644
--- a/drivers/tty/serial/sa1100.c
+++ b/drivers/tty/serial/sa1100.c
@@ -38,6 +38,7 @@
#include <asm/irq.h>
#include <mach/hardware.h>
+#include <mach/irqs.h>
#include <asm/mach/serial_sa1100.h>
/* We've been assigned a range on the "Low-density serial ports" major */
--
1.7.5.4
More information about the linux-arm-kernel
mailing list