[PATCH 1/4] ARM: OMAP2+: board-generic: Remove un-needed .atag_offset for DT_MACHINE

[Cousson, Benoit]

On 2/15/2012 7:13 PM, Tony Lindgren wrote:
> * Cousson, Benoit<b-cousson at ti.com>  [120215 04:43]:
>> On 2/14/2012 8:52 PM, Tony Lindgren wrote:
>>> * Benoit Cousson<b-cousson at ti.com>   [120213 07:59]:
>>>> Some .atag_offset entries were wrongly added during a merge conflict
>>>> resolution in 3.3.
>>>> Remove them all, since DT boot does not use that attribute anymore.
>>>>
>>>> Replace as well the #if... by #ifdef for consistency.
>>>
>>> How about let's also remove the 0x from the serial at 0x.. in the .dts
>>> files in this clean-up patch?
>>
>> In the same patch?
>>
>> I'm fine with fixing that as well, but since this is not in the same
>> file / directory, I'd rather do a different patch.
>>
>> I'll do the fix anyway, it is up to you for the proper location.
> 
> OK separate patch is fine with me.

Please find the patch below, I'll include it in the branch for the pull request.

Thanks,
Benoit


---
>From edc05cc7396228f21d169dd34f1871464f0a00b8 Mon Sep 17 00:00:00 2001
From: Benoit Cousson <b-cousson at ti.com>
Date: Thu, 16 Feb 2012 11:55:27 +0100
Subject: [PATCH] arm/dts: OMAP3&4: Remove the '0x' prefix for serial nodes

Follow the DTS convention and thus name the nodes <name>@<address> without
any '0x' prefix in the physical address.

Suggested-by: Tony Lindgren <tony at atomide.com>
Signed-off-by: Benoit Cousson <b-cousson at ti.com>
---
 arch/arm/boot/dts/omap3.dtsi |    8 ++++----
 arch/arm/boot/dts/omap4.dtsi |    8 ++++----
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 216c331..1c9d10a 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -67,25 +67,25 @@
 			#interrupt-cells = <1>;
 		};
 
-		uart1: serial at 0x4806a000 {
+		uart1: serial at 4806a000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart1";
 			clock-frequency = <48000000>;
 		};
 
-		uart2: serial at 0x4806c000 {
+		uart2: serial at 4806c000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart2";
 			clock-frequency = <48000000>;
 		};
 
-		uart3: serial at 0x49020000 {
+		uart3: serial at 49020000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart3";
 			clock-frequency = <48000000>;
 		};
 
-		uart4: serial at 0x49042000 {
+		uart4: serial at 49042000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart4";
 			clock-frequency = <48000000>;
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index e8fe75f..f40af04 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -104,25 +104,25 @@
 			      <0x48240100 0x0100>;
 		};
 
-		uart1: serial at 0x4806a000 {
+		uart1: serial at 4806a000 {
 			compatible = "ti,omap4-uart";
 			ti,hwmods = "uart1";
 			clock-frequency = <48000000>;
 		};
 
-		uart2: serial at 0x4806c000 {
+		uart2: serial at 4806c000 {
 			compatible = "ti,omap4-uart";
 			ti,hwmods = "uart2";
 			clock-frequency = <48000000>;
 		};
 
-		uart3: serial at 0x48020000 {
+		uart3: serial at 48020000 {
 			compatible = "ti,omap4-uart";
 			ti,hwmods = "uart3";
 			clock-frequency = <48000000>;
 		};
 
-		uart4: serial at 0x4806e000 {
+		uart4: serial at 4806e000 {
 			compatible = "ti,omap4-uart";
 			ti,hwmods = "uart4";
 			clock-frequency = <48000000>;
-- 
1.7.0.4