[PATCH v3] ARM: rpc: make default fiq handler run-time installed
Rob Herring
robherring2 at gmail.com
Tue Feb 14 09:50:18 EST 2012
From: Rob Herring <rob.herring at calxeda.com>
Only rpc uses disable_fiq macro. Change it to a run-time installed
default FIQ handler. The handler is installed before FIQ is enabled
so the behavior should be unchanged.
Signed-off-by: Rob Herring <rob.herring at calxeda.com>
---
Nico,
This removes the use of disable_fiq now. To keep it bisectable, the macro
gets removed from entry-macro-iomd.S in the last patch now.
Rob
arch/arm/mach-rpc/Makefile | 2 +-
arch/arm/mach-rpc/fiq.S | 16 ++++++++++++++++
arch/arm/mach-rpc/irq.c | 6 ++++++
3 files changed, 23 insertions(+), 1 deletions(-)
create mode 100644 arch/arm/mach-rpc/fiq.S
diff --git a/arch/arm/mach-rpc/Makefile b/arch/arm/mach-rpc/Makefile
index aa77bc9..dfa405c 100644
--- a/arch/arm/mach-rpc/Makefile
+++ b/arch/arm/mach-rpc/Makefile
@@ -4,7 +4,7 @@
# Object file lists.
-obj-y := dma.o irq.o riscpc.o
+obj-y := dma.o fiq.o irq.o riscpc.o
obj-m :=
obj-n :=
obj- :=
diff --git a/arch/arm/mach-rpc/fiq.S b/arch/arm/mach-rpc/fiq.S
new file mode 100644
index 0000000..48ddd57
--- /dev/null
+++ b/arch/arm/mach-rpc/fiq.S
@@ -0,0 +1,16 @@
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/hardware.h>
+#include <mach/entry-macro.S>
+
+ .text
+
+ .global rpc_default_fiq_end
+ENTRY(rpc_default_fiq_start)
+ mov r12, #ioc_base_high
+ .if ioc_base_low
+ orr r12, r12, #ioc_base_low
+ .endif
+ strb r12, [r12, #0x38] @ Disable FIQ register
+ subs pc, lr, #4
+rpc_default_fiq_end:
diff --git a/arch/arm/mach-rpc/irq.c b/arch/arm/mach-rpc/irq.c
index 2e1b530..cf0e669 100644
--- a/arch/arm/mach-rpc/irq.c
+++ b/arch/arm/mach-rpc/irq.c
@@ -5,6 +5,7 @@
#include <asm/mach/irq.h>
#include <asm/hardware/iomd.h>
#include <asm/irq.h>
+#include <asm/fiq.h>
static void iomd_ack_irq_a(struct irq_data *d)
{
@@ -112,6 +113,8 @@ static struct irq_chip iomd_fiq_chip = {
.irq_unmask = iomd_unmask_irq_fiq,
};
+extern unsigned char rpc_default_fiq_start, rpc_default_fiq_end;
+
void __init rpc_init_irq(void)
{
unsigned int irq, flags;
@@ -121,6 +124,9 @@ void __init rpc_init_irq(void)
iomd_writeb(0, IOMD_FIQMASK);
iomd_writeb(0, IOMD_DMAMASK);
+ set_fiq_handler(&rpc_default_fiq_start,
+ &rpc_default_fiq_end - &rpc_default_fiq_start);
+
for (irq = 0; irq < NR_IRQS; irq++) {
flags = IRQF_VALID;
--
1.7.5.4
More information about the linux-arm-kernel
mailing list