[PATCH v3] ARM: rpc: make default fiq handler run-time installed

Nicolas Pitre nico at fluxnic.net
Tue Feb 14 12:37:40 EST 2012


On Tue, 14 Feb 2012, Rob Herring wrote:

> From: Rob Herring <rob.herring at calxeda.com>
> 
> Only rpc uses disable_fiq macro. Change it to a run-time installed
> default FIQ handler. The handler is installed before FIQ is enabled
> so the behavior should be unchanged.
> 
> Signed-off-by: Rob Herring <rob.herring at calxeda.com>
> ---
> Nico,
> 
> This removes the use of disable_fiq now. To keep it bisectable, the macro
> gets removed from entry-macro-iomd.S in the last patch now.
> 

[...]

> --- /dev/null
> +++ b/arch/arm/mach-rpc/fiq.S
> @@ -0,0 +1,16 @@
> +#include <linux/linkage.h>
> +#include <asm/assembler.h>
> +#include <mach/hardware.h>
> +#include <mach/entry-macro.S>

Do you need to include <mach/entry-macro.S> here?

In any case:

Acked-by: Nicolas Pitre <nico at linaro.org>

> +
> +	.text
> +
> +	.global	rpc_default_fiq_end
> +ENTRY(rpc_default_fiq_start)
> +	mov	r12, #ioc_base_high
> +	.if	ioc_base_low
> +	orr	r12, r12, #ioc_base_low
> +	.endif
> +	strb	r12, [r12, #0x38]	@ Disable FIQ register
> +	subs	pc, lr, #4
> +rpc_default_fiq_end:
> diff --git a/arch/arm/mach-rpc/irq.c b/arch/arm/mach-rpc/irq.c
> index 2e1b530..cf0e669 100644
> --- a/arch/arm/mach-rpc/irq.c
> +++ b/arch/arm/mach-rpc/irq.c
> @@ -5,6 +5,7 @@
>  #include <asm/mach/irq.h>
>  #include <asm/hardware/iomd.h>
>  #include <asm/irq.h>
> +#include <asm/fiq.h>
>  
>  static void iomd_ack_irq_a(struct irq_data *d)
>  {
> @@ -112,6 +113,8 @@ static struct irq_chip iomd_fiq_chip = {
>  	.irq_unmask	= iomd_unmask_irq_fiq,
>  };
>  
> +extern unsigned char rpc_default_fiq_start, rpc_default_fiq_end;
> +
>  void __init rpc_init_irq(void)
>  {
>  	unsigned int irq, flags;
> @@ -121,6 +124,9 @@ void __init rpc_init_irq(void)
>  	iomd_writeb(0, IOMD_FIQMASK);
>  	iomd_writeb(0, IOMD_DMAMASK);
>  
> +	set_fiq_handler(&rpc_default_fiq_start,
> +		&rpc_default_fiq_end - &rpc_default_fiq_start);
> +
>  	for (irq = 0; irq < NR_IRQS; irq++) {
>  		flags = IRQF_VALID;
>  
> -- 
> 1.7.5.4
> 



More information about the linux-arm-kernel mailing list