[PATCH 0/2 v5] arm: kirkwood: add dreamplug/devicetree support

[Jason]

On Sun, Feb 26, 2012 at 11:00:38AM +0000, Ian Campbell wrote:
> On Thu, 2012-02-23 at 19:52 +0000, Jason Cooper wrote:
> > This patch series provides initial support for devicetree on kirkwood for the
> > dreamplug platform.  After discussing the approach with Arnd Bergman last week
> > at ELC, we decided to take an incremental approach to the conversion.  First, I
> > would detect that we were on the dreamplug via the devicetree blob.  Then,
> > configure uart0 via devicetree.  We chose the uart since it is already well
> > supported under devicetree.
> > 
> > This patch series has been boot-tested on the dreamplug.
> 
> Tested-by: Ian Campbell <ijc at hellion.org.uk>

thanks!

> I needed the following (obvious) patch against u-boot:

yes, I forgot to mention that.  By any chance, have you tested booting
non-fdt kernels from u-boot with this option enabled?  I'm fairly sure
it will work, but I haven't tested it myself.

If you can boot both fdt and non-fdt kernels with this enabled, submit
it to u-boot, CC: Prafulla, and I'll ack it.

thx,

Jason.

> diff --git a/include/configs/dreamplug.h b/include/configs/dreamplug.h
> index 0f2f9a2..76f9eea 100644
> --- a/include/configs/dreamplug.h
> +++ b/include/configs/dreamplug.h
> @@ -148,4 +148,6 @@
>   */
>  #define CONFIG_DISPLAY_CPUINFO
>  
> +#define CONFIG_OF_LIBFDT
> +
>  #endif /* _CONFIG_DREAMPLUG_H */
> 
> 
> Ian.
> 
>