[PATCH 0/2 v5] arm: kirkwood: add dreamplug/devicetree support
ijc at hellion.org.uk
Tue Feb 28 02:20:49 EST 2012
On Mon, 2012-02-27 at 09:57 -0500, Jason wrote:
> On Sun, Feb 26, 2012 at 11:00:38AM +0000, Ian Campbell wrote:
> > On Thu, 2012-02-23 at 19:52 +0000, Jason Cooper wrote:
> > > This patch series provides initial support for devicetree on kirkwood for the
> > > dreamplug platform. After discussing the approach with Arnd Bergman last week
> > > at ELC, we decided to take an incremental approach to the conversion. First, I
> > > would detect that we were on the dreamplug via the devicetree blob. Then,
> > > configure uart0 via devicetree. We chose the uart since it is already well
> > > supported under devicetree.
> > >
> > > This patch series has been boot-tested on the dreamplug.
> > Tested-by: Ian Campbell <ijc at hellion.org.uk>
> > I needed the following (obvious) patch against u-boot:
> yes, I forgot to mention that. By any chance, have you tested booting
> non-fdt kernels from u-boot with this option enabled? I'm fairly sure
> it will work, but I haven't tested it myself.
I hadn't but I have now, it worked fine booting my existing kernel
(which uses v3 of your previous non-FDT dreamplug patches) with the
> If you can boot both fdt and non-fdt kernels with this enabled, submit
> it to u-boot, CC: Prafulla, and I'll ack it.
More information about the linux-arm-kernel