[PATCHv5 02/14] arm: omap: voltage: renamed vp_vddmin and vp_vddmax fields
Tero Kristo
t-kristo at ti.com
Tue Feb 21 09:04:46 EST 2012
These are now called vddmin and vddmax, as these fields will be used
globally for selecting voltage ranges for a pmic channel, and not
only for voltage processor.
Signed-off-by: Tero Kristo <t-kristo at ti.com>
---
arch/arm/mach-omap2/omap_twl.c | 27 ++++++++++-----------------
arch/arm/mach-omap2/voltage.h | 4 ++--
arch/arm/mach-omap2/vp.c | 4 ++--
3 files changed, 14 insertions(+), 21 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c
index df4e7c3..5224fbd 100644
--- a/arch/arm/mach-omap2/omap_twl.c
+++ b/arch/arm/mach-omap2/omap_twl.c
@@ -149,8 +149,8 @@ static struct omap_voltdm_pmic omap3_mpu_pmic = {
.vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN,
.vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX,
- .vp_vddmin = OMAP3430_VP1_VLIMITTO_VDDMIN,
- .vp_vddmax = OMAP3430_VP1_VLIMITTO_VDDMAX,
+ .vddmin = 600000,
+ .vddmax = 1450000,
.vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR,
.volt_reg_addr = OMAP3_VDD_MPU_SR_CONTROL_REG,
@@ -170,8 +170,8 @@ static struct omap_voltdm_pmic omap3_core_pmic = {
.vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN,
.vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX,
- .vp_vddmin = OMAP3430_VP2_VLIMITTO_VDDMIN,
- .vp_vddmax = OMAP3430_VP2_VLIMITTO_VDDMAX,
+ .vddmin = 600000,
+ .vddmax = 1450000,
.vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR,
.volt_reg_addr = OMAP3_VDD_CORE_SR_CONTROL_REG,
@@ -191,8 +191,8 @@ static struct omap_voltdm_pmic omap4_mpu_pmic = {
.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
.vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
- .vp_vddmin = OMAP4_VP_MPU_VLIMITTO_VDDMIN,
- .vp_vddmax = OMAP4_VP_MPU_VLIMITTO_VDDMAX,
+ .vddmin = 0,
+ .vddmax = 1500000,
.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
.volt_reg_addr = OMAP4_VDD_MPU_SR_VOLT_REG,
@@ -213,8 +213,8 @@ static struct omap_voltdm_pmic omap4_iva_pmic = {
.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
.vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
- .vp_vddmin = OMAP4_VP_IVA_VLIMITTO_VDDMIN,
- .vp_vddmax = OMAP4_VP_IVA_VLIMITTO_VDDMAX,
+ .vddmin = 0,
+ .vddmax = 1500000,
.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
.volt_reg_addr = OMAP4_VDD_IVA_SR_VOLT_REG,
@@ -235,8 +235,8 @@ static struct omap_voltdm_pmic omap4_core_pmic = {
.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
.vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
- .vp_vddmin = OMAP4_VP_CORE_VLIMITTO_VDDMIN,
- .vp_vddmax = OMAP4_VP_CORE_VLIMITTO_VDDMAX,
+ .vddmin = 0,
+ .vddmax = 1500000,
.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
.volt_reg_addr = OMAP4_VDD_CORE_SR_VOLT_REG,
@@ -271,13 +271,6 @@ int __init omap3_twl_init(void)
if (!cpu_is_omap34xx())
return -ENODEV;
- if (cpu_is_omap3630()) {
- omap3_mpu_pmic.vp_vddmin = OMAP3630_VP1_VLIMITTO_VDDMIN;
- omap3_mpu_pmic.vp_vddmax = OMAP3630_VP1_VLIMITTO_VDDMAX;
- omap3_core_pmic.vp_vddmin = OMAP3630_VP2_VLIMITTO_VDDMIN;
- omap3_core_pmic.vp_vddmax = OMAP3630_VP2_VLIMITTO_VDDMAX;
- }
-
/*
* The smartreflex bit on twl4030 specifies if the setting of voltage
* is done over the I2C_SR path. Since this setting is independent of
diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h
index fa5b3dc..949938d 100644
--- a/arch/arm/mach-omap2/voltage.h
+++ b/arch/arm/mach-omap2/voltage.h
@@ -162,8 +162,8 @@ struct omap_voltdm_pmic {
u8 vp_erroroffset;
u8 vp_vstepmin;
u8 vp_vstepmax;
- u32 vp_vddmin;
- u32 vp_vddmax;
+ u32 vddmin;
+ u32 vddmax;
u8 vp_timeout_us;
bool i2c_high_speed;
u8 i2c_mcode;
diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c
index 6ee0b4a..d9e0650 100644
--- a/arch/arm/mach-omap2/vp.c
+++ b/arch/arm/mach-omap2/vp.c
@@ -53,8 +53,8 @@ void __init omap_vp_init(struct voltagedomain *voltdm)
sys_clk_rate = voltdm->sys_clk.rate / 1000;
timeout = (sys_clk_rate * voltdm->pmic->vp_timeout_us) / 1000;
- vddmin = voltdm->pmic->uv_to_vsel(voltdm->pmic->vp_vddmin);
- vddmax = voltdm->pmic->uv_to_vsel(voltdm->pmic->vp_vddmax);
+ vddmin = voltdm->pmic->uv_to_vsel(voltdm->pmic->vddmin);
+ vddmax = voltdm->pmic->uv_to_vsel(voltdm->pmic->vddmax);
waittime = ((voltdm->pmic->step_size / voltdm->pmic->slew_rate) *
sys_clk_rate) / 1000;
--
1.7.4.1
More information about the linux-arm-kernel
mailing list