[PATCHv2 5/6] ARM: OMAP4: hwmod_data: Do not get DSP out of reset at boot time

[Tero Kristo]

From: Rajendra Nayak <rnayak at ti.com>

With no driver handling DSP, if brought out of reset, it stays
active and does not assert standby. This leads to IVAHD powerdomain not
transitioning and hence preventing chip retention.

Signed-off-by: Rajendra Nayak <rnayak at ti.com>
Signed-off-by: Tero Kristo <t-kristo at ti.com>
---
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index ef0524c..81d90da 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -1160,6 +1160,7 @@ static struct omap_hwmod omap44xx_dsp_hwmod = {
 	.name		= "dsp",
 	.class		= &omap44xx_dsp_hwmod_class,
 	.clkdm_name	= "tesla_clkdm",
+	.flags		= HWMOD_INIT_NO_RESET,
 	.mpu_irqs	= omap44xx_dsp_irqs,
 	.rst_lines	= omap44xx_dsp_resets,
 	.rst_lines_cnt	= ARRAY_SIZE(omap44xx_dsp_resets),
-- 
1.7.4.1