[PATCH 1/4 v2] i2c/gpio: add DT support
Russell King - ARM Linux
linux at arm.linux.org.uk
Mon Feb 20 10:27:48 EST 2012
On Mon, Feb 20, 2012 at 04:08:10PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 15:00 Mon 20 Feb , Russell King - ARM Linux wrote:
> > On Mon, Feb 20, 2012 at 03:46:35PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > > On 13:58 Mon 20 Feb , Russell King - ARM Linux wrote:
> > > > On Mon, Feb 20, 2012 at 02:46:34PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > > > > On 14:37 Mon 20 Feb , Jean-Christophe PLAGNIOL-VILLARD wrote:
> > > > > > On 12:50 Mon 20 Feb , Russell King - ARM Linux wrote:
> > > > > > > On Mon, Feb 20, 2012 at 11:22:31AM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > > > > > > > On 10:08 Mon 20 Feb , Russell King - ARM Linux wrote:
> > > > > > > > > On Mon, Feb 20, 2012 at 10:58:13AM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > > > > > > > > > On 18:17 Mon 13 Feb , Karol Lewandowski wrote:
> > > > > > > > > > > > + - udelay: delay between GPIO operations (may depend on each platform)
> > > > > > > > > > > > + - timeout: timeout to get data (ms)
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > If these are really needed then I would prefer to have these fully
> > > > > > > > > > > qualified (with unit type "-ms/-millisecs" appended).
> > > > > > > > > > >
> > > > > > > > > > > Regulator framework, with its "-microvolt/-microamp", serve here as
> > > > > > > > > > > prime example of being quite descriptive (one doesn't neet to look up
> > > > > > > > > > > the docs). Please see:
> > > > > > > > > > >
> > > > > > > > > > > http://permalink.gmane.org/gmane.linux.ports.arm.omap/67637
> > > > > > > > > > timeout are usualy in ms I don't really see the need of -ms or so
> > > > > > > > >
> > > > > > > > > Which is obviously total crap for udelay, which would be in _micro_seconds.
> > > > > > > > agreed but here on i2c gpio I never see timetout as udelay so I don't see
> > > > > > > > the mandatory to force the name in the binding
> > > > > > > >
> > > > > > > > futhermore it's maybe linux specific
> > > > > > >
> > > > > > > Stop grabbing at straws. There's nothing linux specific about the units
> > > > > > > of specification.
> > > > > > >
> > > > > > > What is linux specific is specifying the _delay_ rather than specifying
> > > > > > > the bus frequency. So as soon as you're trying to justify not adding
> > > > > > > the units because they may be linux specific, you've already lost that
> > > > > > > argument by using a delay rather than a bus frequency. You can't have
> > > > > > > it both ways.
> > > > > > >
> > > > > > > Moreover, mixing microseconds and milliseconds in the properties for a
> > > > > > > device is absolutely insane.
> > > > > > >
> > > > > > > So, which ever way, your patch as it currently stands is wrong and broken.
> > > > > > no what I said is the binding timeout is maybe linux specific for i2c gpio
> > > > >
> > > > > I do not argue about that here we do not even disucss about the bus frequency
> > > > > but the specific bining to the i2c algo bit for it's internal timeout
> > > > >
> > > > > the timeout is used to do not end in an infinite loop while ready the scl on
> > > > > slow device
> > > >
> > > > The patch is still wrong and broken.
> > > >
> > > > As you're not listening to me at all, I've lost patience, so I'm just going
> > > > to say this:
> > > >
> > > > Explicit NAK on this patch.
> > > >
> > > > When you feel like you can _constructively_ _consider_ the point that both
> > > > Karol and myself have raised with respect to the _U_N_I_T_S_ then feel free
> > > > to continue this discussion. If not, don't waste your time writing another
> > > > email. I hope that's plain.
> > >
> > > I do not discuss about the U_N_I_T_S at all in this reply
> > > so the NACK is no revelent
> >
> > LET ME PUT IT IN BIG LETTERS FOR YOU. I AM DISCUSSING THE UNITS ISSUE IN
> > MY EMAILS. YOU KEEP BRINGING UP THE LINUX SPECIFIC CRAP ABOUT UDELAY OR
> > TIMEOUT.
> >
> > I AM TALKING ABOUT UNITS. MICROSECONDS. MILLISECONDS.
> >
> > I HAVE BEEN TALKING ABOUT UNITS ON THIS THREAD ALL DAY SO FAR.
> >
> > GET IT THROUGH YOUR BIG HEAD THAT I AM DISCUSSING ABOUT THE UNITS. I AM
> > NOT DISCUSSING, AND HAVE NOT BEEN DISCUSSING ABOUT WHETHER BUS FREQUENCY
> > OR DELAYS ARE APPROPRIATE IN THIS CASE.
> >
> > ALL THAT I AM DISCUSSING IS ABOUT THE UNITS. *T*H*E* *S*O*D*D*I*N*G*
> > *U*N*I*T*S*.
> >
> > HAVE YOU GOT THE FUCKING MESSAGE YET?
> >
> > SO, THE NACK STANDS UNTIL YOU START REPLYING TO THE POINT I AM RAISING.
>
> I just said we have 2 properties
>
> - timeout which is expressed in jiffies (today in C) which is at my sense a linux specific
> propertie as it's representing a timeout of the i2c bit algo
> and here I don't see the mandatory to name it timeout-ms or timeout-milisecond
THIS IS IN MILLISECONDS.
> - udelay which is the delay between GPIO operations
THIS IS IN MICROSECONDS.
TWO DIFFERENT UNITS FOR TWO DIFFERENT PROPERTIES FOR THE SAME DEVICE.
CONFUSING. NACK STANDS.
More information about the linux-arm-kernel
mailing list