[PATCH 2/7] regulator: twl-regulator: Add fixed LDO for V1V8, V2V1 supply

[Peter Ujfalusi]

V1V8 supply most common use is to provide VIO for the system.
V2V1 supply is used on SDP4430/PandaBoards to provide 2.1V to
twl6040, and also as an input to VCXIO_IN, VDAC_IN of twl6030.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi at ti.com>
---
 drivers/regulator/twl-regulator.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c
index 181a2cf..e4d8d3c 100644
--- a/drivers/regulator/twl-regulator.c
+++ b/drivers/regulator/twl-regulator.c
@@ -1005,6 +1005,8 @@ static struct twlreg_info twl_regs[] = {
 	TWL6030_ADJUSTABLE_LDO(VMMC, 0x68, 1000, 3300),
 	TWL6030_ADJUSTABLE_LDO(VPP, 0x6c, 1000, 3300),
 	TWL6030_ADJUSTABLE_LDO(VUSIM, 0x74, 1000, 3300),
+	TWL6030_FIXED_LDO(V1V8, 0x16, 1800, 0),
+	TWL6030_FIXED_LDO(V2V1, 0x1c, 2100, 0),
 	TWL6030_FIXED_LDO(VANA, 0x50, 2100, 0),
 	TWL6030_FIXED_LDO(VCXIO, 0x60, 1800, 0),
 	TWL6030_FIXED_LDO(VDAC, 0x64, 1800, 0),
-- 
1.7.8.4