[PATCH] ARM: at91/rtc-at91sam9: rework resources assignment
Ryan Mallon
rmallon at gmail.com
Mon Feb 20 15:04:26 EST 2012
On 21/02/12 01:45, Nicolas Ferre wrote:
> Signed-off-by: Nicolas Ferre <nicolas.ferre at atmel.com>
> ---
> Russell, Ryan,
>
> As I do think that these changes need explanation, here is my rework of Jean's
> patch. I would like to know if the little comment and general rework of
> resources assignment sound ok...
>
> I plan to merge this patch with the one discussed previously:
> "[PATCH 13/18] ARM: at91/rtc-at91sam9: pass the GPBR to use via ressources"
Thanks Nicolas,
Reviewed-by: Ryan Mallon <rmallon at gmail.com>
> If you agree, I will repost the whole series afterwards.
>
>
> arch/arm/mach-at91/at91sam9260_devices.c | 13 ++++++++++---
> arch/arm/mach-at91/at91sam9261_devices.c | 13 ++++++++++---
> arch/arm/mach-at91/at91sam9263_devices.c | 22 ++++++++++++++++------
> arch/arm/mach-at91/at91sam9g45_devices.c | 13 ++++++++++---
> arch/arm/mach-at91/at91sam9rl_devices.c | 13 ++++++++++---
> 5 files changed, 56 insertions(+), 18 deletions(-)
>
> diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
> index f8a88fb..df487ce 100644
> --- a/arch/arm/mach-at91/at91sam9260_devices.c
> +++ b/arch/arm/mach-at91/at91sam9260_devices.c
> @@ -727,7 +727,6 @@ static struct platform_device at91sam9260_rtt_device = {
> .name = "at91_rtt",
> .id = 0,
> .resource = rtt_resources,
> - .num_resources = 1,
> };
>
>
> @@ -735,13 +734,21 @@ static struct platform_device at91sam9260_rtt_device = {
> static void __init at91_add_device_rtt_rtc(void)
> {
> at91sam9260_rtt_device.name = "rtc-at91sam9";
> - at91sam9260_rtt_device.num_resources++;
> + /*
> + * The second resource is needed:
> + * GPBR will serve as the storage for RTC time offset
> + */
> + at91sam9260_rtt_device.num_resources = 2;
> rtt_resources[1].start = AT91SAM9260_BASE_GPBR +
> 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
> rtt_resources[1].end = rtt_resources[1].start + 3;
> }
> #else
> -static void __init at91_add_device_rtt_rtc(void) {}
> +static void __init at91_add_device_rtt_rtc(void)
> +{
> + /* Only one resource is needed: RTT not used as RTC */
> + at91sam9260_rtt_device.num_resources = 1;
> +}
> #endif
>
> static void __init at91_add_device_rtt(void)
> diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
> index 32a20ef..3bd10ce 100644
> --- a/arch/arm/mach-at91/at91sam9261_devices.c
> +++ b/arch/arm/mach-at91/at91sam9261_devices.c
> @@ -613,20 +613,27 @@ static struct platform_device at91sam9261_rtt_device = {
> .name = "at91_rtt",
> .id = 0,
> .resource = rtt_resources,
> - .num_resources = 1,
> };
>
> #if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
> static void __init at91_add_device_rtt_rtc(void)
> {
> at91sam9261_rtt_device.name = "rtc-at91sam9";
> - at91sam9261_rtt_device.num_resources++;
> + /*
> + * The second resource is needed:
> + * GPBR will serve as the storage for RTC time offset
> + */
> + at91sam9261_rtt_device.num_resources = 2;
> rtt_resources[1].start = AT91SAM9261_BASE_GPBR +
> 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
> rtt_resources[1].end = rtt_resources[1].start + 3;
> }
> #else
> -static void __init at91_add_device_rtt_rtc(void) {}
> +static void __init at91_add_device_rtt_rtc(void)
> +{
> + /* Only one resource is needed: RTT not used as RTC */
> + at91sam9261_rtt_device.num_resources = 1;
> +}
> #endif
>
> static void __init at91_add_device_rtt(void)
> diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
> index 28cb074..7792de5 100644
> --- a/arch/arm/mach-at91/at91sam9263_devices.c
> +++ b/arch/arm/mach-at91/at91sam9263_devices.c
> @@ -976,7 +976,6 @@ static struct platform_device at91sam9263_rtt0_device = {
> .name = "at91_rtt",
> .id = 0,
> .resource = rtt0_resources,
> - .num_resources = 1,
> };
>
> static struct resource rtt1_resources[] = {
> @@ -993,7 +992,6 @@ static struct platform_device at91sam9263_rtt1_device = {
> .name = "at91_rtt",
> .id = 1,
> .resource = rtt1_resources,
> - .num_resources = 1,
> };
>
> #if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
> @@ -1004,26 +1002,38 @@ static void __init at91_add_device_rtt_rtc(void)
>
> switch (CONFIG_RTC_DRV_AT91SAM9_RTT) {
> case 0:
> + /*
> + * The second resource is needed only for the chosen RTT:
> + * GPBR will serve as the storage for RTC time offset
> + */
> + at91sam9263_rtt0_device.num_resources = 2;
> + at91sam9263_rtt1_device.num_resources = 1;
> pdev = &at91sam9263_rtt0_device;
> r = rtt0_resources;
> break;
> case 1:
> + at91sam9263_rtt0_device.num_resources = 1;
> + at91sam9263_rtt1_device.num_resources = 2;
> pdev = &at91sam9263_rtt1_device;
> r = rtt1_resources;
> break;
> default:
> - pr_err("at91sam9263: support only 2 RTT (%d)\n",
> + pr_err("at91sam9263: only supports 2 RTT (%d)\n",
> CONFIG_RTC_DRV_AT91SAM9_RTT);
> return;
> }
>
> + pdev->name = "rtc-at91sam9";
> r[1].start = AT91SAM9263_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
> r[1].end = r[1].start + 3;
> - pdev->name = "rtc-at91sam9";
> - pdev->num_resources++;
> }
> #else
> -static void __init at91_add_device_rtt_rtc(void) {}
> +static void __init at91_add_device_rtt_rtc(void)
> +{
> + /* Only one resource is needed: RTT not used as RTC */
> + at91sam9263_rtt0_device.num_resources = 1;
> + at91sam9263_rtt1_device.num_resources = 1;
> +}
> #endif
>
> static void __init at91_add_device_rtt(void)
> diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
> index bb7e2ce..4108295 100644
> --- a/arch/arm/mach-at91/at91sam9g45_devices.c
> +++ b/arch/arm/mach-at91/at91sam9g45_devices.c
> @@ -1203,20 +1203,27 @@ static struct platform_device at91sam9g45_rtt_device = {
> .name = "at91_rtt",
> .id = 0,
> .resource = rtt_resources,
> - .num_resources = 1,
> };
>
> #if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
> static void __init at91_add_device_rtt_rtc(void)
> {
> at91sam9g45_rtt_device.name = "rtc-at91sam9";
> - at91sam9g45_rtt_device.num_resources++;
> + /*
> + * The second resource is needed:
> + * GPBR will serve as the storage for RTC time offset
> + */
> + at91sam9g45_rtt_device.num_resources = 2;
> rtt_resources[1].start = AT91SAM9G45_BASE_GPBR +
> 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
> rtt_resources[1].end = rtt_resources[1].start + 3;
> }
> #else
> -static void __init at91_add_device_rtt_rtc(void) {}
> +static void __init at91_add_device_rtt_rtc(void)
> +{
> + /* Only one resource is needed: RTT not used as RTC */
> + at91sam9g45_rtt_device.num_resources = 1;
> +}
> #endif
>
> static void __init at91_add_device_rtt(void)
> diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
> index 16fd20b..eda72e8 100644
> --- a/arch/arm/mach-at91/at91sam9rl_devices.c
> +++ b/arch/arm/mach-at91/at91sam9rl_devices.c
> @@ -692,20 +692,27 @@ static struct platform_device at91sam9rl_rtt_device = {
> .name = "at91_rtt",
> .id = 0,
> .resource = rtt_resources,
> - .num_resources = 1,
> };
>
> #if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
> static void __init at91_add_device_rtt_rtc(void)
> {
> at91sam9rl_rtt_device.name = "rtc-at91sam9";
> - at91sam9rl_rtt_device.num_resources++;
> + /*
> + * The second resource is needed:
> + * GPBR will serve as the storage for RTC time offset
> + */
> + at91sam9rl_rtt_device.num_resources = 2;
> rtt_resources[1].start = AT91SAM9RL_BASE_GPBR +
> 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
> rtt_resources[1].end = rtt_resources[1].start + 3;
> }
> #else
> -static void __init at91_add_device_rtt_rtc(void) {}
> +static void __init at91_add_device_rtt_rtc(void)
> +{
> + /* Only one resource is needed: RTT not used as RTC */
> + at91sam9rl_rtt_device.num_resources = 1;
> +}
> #endif
>
> static void __init at91_add_device_rtt(void)
More information about the linux-arm-kernel
mailing list