[PATCH 5/6] arm: omap3: set autoidle flags for a few clocks

[Tero Kristo]

dpll3, dpll4 and sdrc_ick are controlled automatically by hardware.
Thus, reflect this with the autoidle flags, the clocks will no longer
show as active in usecount dumps and will allow the voltdm->sleep /
wakeup calls to work properly.

Signed-off-by: Tero Kristo <t-kristo at ti.com>
Cc: Paul Walmsley <paul at pwsan.com>
Cc: Kevin Hilman <khilman at ti.com>
---
 arch/arm/mach-omap2/clock3xxx_data.c |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index d75e5f6..f3ee983 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -432,6 +432,7 @@ static struct clk dpll3_ck = {
 	.round_rate	= &omap2_dpll_round_rate,
 	.clkdm_name	= "dpll3_clkdm",
 	.recalc		= &omap3_dpll_recalc,
+	.autoidle	= true,
 };
 
 /*
@@ -615,6 +616,7 @@ static struct clk dpll4_ck = {
 	.set_rate	= &omap3_dpll4_set_rate,
 	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap3_dpll_recalc,
+	.autoidle	= true,
 };
 
 /*
@@ -1744,6 +1746,7 @@ static struct clk sdrc_ick = {
 	.flags		= ENABLE_ON_INIT,
 	.clkdm_name	= "core_l3_clkdm",
 	.recalc		= &followparent_recalc,
+	.autoidle	= true,
 };
 
 static struct clk gpmc_fck = {
-- 
1.7.4.1