[PATCH 13/18] ARM: at91/rtc-at91sam9: pass the GPBR to use via ressources

[Nicolas Ferre]

On 02/20/2012 11:04 AM, Russell King - ARM Linux :
> On Mon, Feb 20, 2012 at 10:16:47AM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
>> On 07:36 Mon 20 Feb     , Russell King - ARM Linux wrote:
>>> On Mon, Feb 20, 2012 at 02:20:10AM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
>>>> On 11:43 Mon 20 Feb     , Ryan Mallon wrote:
>>>>> On 18/02/12 04:50, Nicolas Ferre wrote:
>>>>>
>>>>>> From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
>>>>>>
>>>>>> The GPBR registers are used for storing RTC values. The GPBR registers
>>>>>> to use are now provided using standard resource entry. The array is
>>>>>> filled in SoC specific code.
>>>>>> rtc-at91sam9 RTT as RTC driver is modified to retrieve this information.
>>>>>>
>>>>>> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
>>>>>> Acked-by: Nicolas Ferre <nicolas.ferre at atmel.com>
>>>>>> ---
>>>>>>  arch/arm/mach-at91/at91sam9260_devices.c      |   10 +++++++-
>>>>>>  arch/arm/mach-at91/at91sam9261_devices.c      |    8 ++++++-
>>>>>>  arch/arm/mach-at91/at91sam9263_devices.c      |   16 +++++++++++--
>>>>>>  arch/arm/mach-at91/at91sam9g45_devices.c      |    8 ++++++-
>>>>>>  arch/arm/mach-at91/at91sam9rl_devices.c       |    8 ++++++-
>>>>>>  arch/arm/mach-at91/include/mach/at91sam9260.h |    5 +--
>>>>>>  arch/arm/mach-at91/include/mach/at91sam9261.h |    5 +--
>>>>>>  arch/arm/mach-at91/include/mach/at91sam9263.h |    5 +--
>>>>>>  arch/arm/mach-at91/include/mach/at91sam9g45.h |    5 +--
>>>>>>  arch/arm/mach-at91/include/mach/at91sam9rl.h  |    2 +-
>>>>>>  drivers/rtc/rtc-at91sam9.c                    |   29 +++++++++++++++++++++---
>>>>>>  11 files changed, 76 insertions(+), 25 deletions(-)
>>>>>>
>>>>>> diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
>>>>>> index 2071017..ae2b648 100644
>>>>>> --- a/arch/arm/mach-at91/at91sam9260_devices.c
>>>>>> +++ b/arch/arm/mach-at91/at91sam9260_devices.c
>>>>>> @@ -718,14 +718,16 @@ static struct resource rtt_resources[] = {
>>>>>>  		.start	= AT91SAM9260_BASE_RTT,
>>>>>>  		.end	= AT91SAM9260_BASE_RTT + SZ_16 - 1,
>>>>>>  		.flags	= IORESOURCE_MEM,
>>>>>> -	}
>>>>>> +	}, {
>>>>>> +		.flags	= IORESOURCE_MEM,
>>>>>> +	},
>>>>>>  };
>>>>>>  
>>>>>>  static struct platform_device at91sam9260_rtt_device = {
>>>>>>  	.name		= "at91_rtt",
>>>>>>  	.id		= 0,
>>>>>>  	.resource	= rtt_resources,
>>>>>> -	.num_resources	= ARRAY_SIZE(rtt_resources),
>>>>>> +	.num_resources	= 1,
>>>>>
>>>>>
>>>>> Why this change? The device has two resources, and the rtc driver
>>>>> request both of them, so why are you saying there is only one resource
>>>>> here. It either needs to be changed back to use ARRAY_SIZE, or needs a
>>>>> comment explaining what magic is in use.
>>>> because the number of resources depends on the user of rtt
>>>> we must not hardcode the GPBR reg as this resource will be present only if the
>>>> rtc-at91sam9 is enabled
>>>
>>> Better would be to leave .num_resources uninitalized and set that
>>> appropriately elsewhere when you make the decision whether GPBR is
>>> present or not.  That may help to avoid people trying to "fix" this
>>> for you via static checking tools.
>>>
>>> As Ryan mentions, a comment in the code would be a good idea too.
>> the comment is in the drivers code and Kconfig
> 
> Not good enough.  It needs to explain at the at91sam9260_rtt_device
> definition why there is a disparity between the number of resources
> and the number in the device definition.
> 
> People running static checking tools or reading this code aren't going
> to look in the Kconfig nor the corresponding driver source for this
> information.

Absolutely, I am in favor of clear documentation.
Moreover, it seems that some lines of explanation have been lost during
the reworking process.

So, we cook another patch series now...

Best regards,
-- 
Nicolas Ferre