[PATCHv5 07/14] arm: omap3+: vp: use new vp_params for calculating vddmin and vddmax

[Tero Kristo]

Now we select the vddmin and vddmax values based on both pmic and
voltage processor data, this allows usage of different power ICs.

Signed-off-by: Tero Kristo <t-kristo at ti.com>
---
 arch/arm/mach-omap2/vp.c |    6 ++++--
 1 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c
index d9e0650..22df86d 100644
--- a/arch/arm/mach-omap2/vp.c
+++ b/arch/arm/mach-omap2/vp.c
@@ -53,8 +53,10 @@ void __init omap_vp_init(struct voltagedomain *voltdm)
 	sys_clk_rate = voltdm->sys_clk.rate / 1000;
 
 	timeout = (sys_clk_rate * voltdm->pmic->vp_timeout_us) / 1000;
-	vddmin = voltdm->pmic->uv_to_vsel(voltdm->pmic->vddmin);
-	vddmax = voltdm->pmic->uv_to_vsel(voltdm->pmic->vddmax);
+	vddmin = max(voltdm->vp_param->vddmin, voltdm->pmic->vddmin);
+	vddmax = min(voltdm->vp_param->vddmax, voltdm->pmic->vddmax);
+	vddmin = voltdm->pmic->uv_to_vsel(vddmin);
+	vddmax = voltdm->pmic->uv_to_vsel(vddmax);
 
 	waittime = ((voltdm->pmic->step_size / voltdm->pmic->slew_rate) *
 		    sys_clk_rate) / 1000;
-- 
1.7.4.1