[GIT PULL 5/5] Clean-up for omap
Kevin Hilman
khilman at ti.com
Wed Feb 29 19:39:22 EST 2012
+Grant (for conflict w/GPIO series already queued)
Tony Lindgren <tony at atomide.com> writes:
> This is mostly changes needed for io.h removal, and one
> patch to remove unused flag for McSPI. Note that these
> are based on RMK's for-armsoc.
>
> Also, these cause a minor merge conflict for mach-omap2/Kconfig
> with the fixes-non-critical posted in this series of pull
> requests.
Grant, FYI... this series will cause a minor conflict with the GPIO
runtime PM cleanup you've already pulled from me.
Basically, this patch from $SUBJECT series by Tony:
ARM: OMAP1: Move 16xx GPIO system clock to platform init code
duplicates work already done in the branch you've pulled.
Not sure how you want to handle this, but maybe you want to merge this
cleanup branch as well. If so, the fix is to resolve in favor of the
GPIO branch you've already pulled from me.
Kevin
> Regards,
>
> Tony
>
> The following changes since commit 61b80086a525c8a6081257ae40da5dee2bcaee16:
> Russell King (1):
> Merge branch 'entry-macro-cleanup' of git://sources.calxeda.com/kernel/linux into for-armsoc
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap cleanup
>
> Jarkko Nikula (1):
> ARM: OMAP: McSPI: Remove unused flag from struct omap2_mcspi_device_config
>
> Paul Walmsley (1):
> ARM: OMAP2xxx: PM: remove obsolete timer disable code in the suspend path
>
> Tony Lindgren (10):
> ARM: OMAP2+: Drop DISPC L3 firewall code
> ARM: OMAP2+: Move SDRC related functions from io.h into local common.h
> ARM: OMAP: Move omap_init_consistent_dma_size() to local common.h
> ARM: OMAP1: Move 16xx GPIO system clock to platform init code
> ARM: OMAP1: Move most of plat/io.h into local iomap.h
> ARM: OMAP2+: Move most of plat/io.h into local iomap.h
> ARM: OMAP: Remove plat/io.h by splitting it into mach/io.h and mach/hardware.h
> ARM: OMAP2+: Limit omap_read/write usage to legacy USB drivers
> Merge branch 'iomap' into cleanup
> ARM: OMAP2+: Fix L4_EMU_34XX_BASE error after iomap changes
>
> arch/arm/mach-omap1/ams-delta-fiq-handler.S | 3 +-
> arch/arm/mach-omap1/ams-delta-fiq.c | 1 +
> arch/arm/mach-omap1/board-ams-delta.c | 10 ++-
> arch/arm/mach-omap1/board-fsample.c | 7 +-
> arch/arm/mach-omap1/board-h2.c | 6 +-
> arch/arm/mach-omap1/board-h3.c | 8 +-
> arch/arm/mach-omap1/board-htcherald.c | 5 +-
> arch/arm/mach-omap1/board-innovator.c | 7 +-
> arch/arm/mach-omap1/board-nokia770.c | 6 +-
> arch/arm/mach-omap1/board-osk.c | 7 +-
> arch/arm/mach-omap1/board-palmte.c | 4 +-
> arch/arm/mach-omap1/board-palmtt.c | 9 +-
> arch/arm/mach-omap1/board-palmz71.c | 9 +-
> arch/arm/mach-omap1/board-perseus2.c | 7 +-
> arch/arm/mach-omap1/board-sx1.c | 6 +-
> arch/arm/mach-omap1/board-voiceblue.c | 6 +-
> arch/arm/mach-omap1/clock.c | 5 +-
> arch/arm/mach-omap1/clock_data.c | 5 +-
> arch/arm/mach-omap1/common.h | 1 +
> arch/arm/mach-omap1/devices.c | 8 +-
> arch/arm/mach-omap1/dma.c | 2 +-
> arch/arm/mach-omap1/flash.c | 4 +-
> arch/arm/mach-omap1/fpga.c | 5 +-
> arch/arm/mach-omap1/gpio16xx.c | 7 ++
> arch/arm/mach-omap1/id.c | 3 +
> arch/arm/mach-omap1/include/mach/entry-macro.S | 4 +-
> arch/arm/mach-omap1/include/mach/hardware.h | 36 +++++++++
> arch/arm/mach-omap1/include/mach/io.h | 43 ++++++++++-
> arch/arm/mach-omap1/include/mach/memory.h | 3 +-
> arch/arm/mach-omap1/io.c | 3 +
> arch/arm/mach-omap1/iomap.h | 42 ++++++++++
> arch/arm/mach-omap1/irq.c | 4 +-
> arch/arm/mach-omap1/lcd_dma.c | 3 +-
> arch/arm/mach-omap1/mcbsp.c | 5 +-
> arch/arm/mach-omap1/pm.c | 4 +-
> arch/arm/mach-omap1/reset.c | 3 +-
> arch/arm/mach-omap1/sleep.S | 4 +
> arch/arm/mach-omap1/sram.S | 4 +
> arch/arm/mach-omap1/time.c | 3 +-
> arch/arm/mach-omap1/timer32k.c | 7 +-
> arch/arm/mach-omap2/board-cm-t35.c | 1 -
> arch/arm/mach-omap2/board-n8x0.c | 1 -
> arch/arm/mach-omap2/board-rx51-peripherals.c | 3 -
> arch/arm/mach-omap2/board-zoom-display.c | 1 -
> arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c | 1 +
> arch/arm/mach-omap2/clkt_dpll.c | 1 +
> arch/arm/mach-omap2/clock2420_data.c | 3 +
> arch/arm/mach-omap2/clock2430.c | 2 +
> arch/arm/mach-omap2/clock2430_data.c | 2 +
> arch/arm/mach-omap2/clock2xxx.c | 1 +
> arch/arm/mach-omap2/clock3xxx.c | 1 +
> arch/arm/mach-omap2/clock3xxx_data.c | 3 +-
> arch/arm/mach-omap2/clock44xx_data.c | 3 +
> arch/arm/mach-omap2/cm2xxx_3xxx.c | 2 +-
> arch/arm/mach-omap2/cm44xx.c | 2 +-
> arch/arm/mach-omap2/cminst44xx.c | 2 +-
> arch/arm/mach-omap2/common-board-devices.c | 1 -
> arch/arm/mach-omap2/common.c | 4 +-
> arch/arm/mach-omap2/common.h | 7 ++
> arch/arm/mach-omap2/control.c | 3 +-
> arch/arm/mach-omap2/control.h | 1 -
> arch/arm/mach-omap2/devices.c | 2 +-
> arch/arm/mach-omap2/display.c | 1 +
> arch/arm/mach-omap2/emu.c | 4 +
> arch/arm/mach-omap2/gpmc-nand.c | 1 +
> arch/arm/mach-omap2/gpmc-onenand.c | 1 +
> arch/arm/mach-omap2/include/mach/io.h | 46 +++++++++++-
> arch/arm/mach-omap2/io.c | 57 ++------------
> .../include/plat/io.h => mach-omap2/iomap.h} | 80 +-------------------
> arch/arm/mach-omap2/irq.c | 5 +-
> arch/arm/mach-omap2/omap-smp.c | 3 +-
> arch/arm/mach-omap2/opp2420_data.c | 2 +
> arch/arm/mach-omap2/opp2430_data.c | 2 +
> arch/arm/mach-omap2/pm24xx.c | 27 +------
> arch/arm/mach-omap2/prcm_mpu44xx.c | 2 +-
> arch/arm/mach-omap2/prm44xx.c | 3 +-
> arch/arm/mach-omap2/prminst44xx.c | 2 +-
> arch/arm/mach-omap2/sdram-nokia.c | 1 -
> arch/arm/mach-omap2/sdrc2xxx.c | 5 +-
> arch/arm/mach-omap2/sleep24xx.S | 1 -
> arch/arm/mach-omap2/sleep34xx.S | 5 +-
> arch/arm/mach-omap2/sram242x.S | 4 +-
> arch/arm/mach-omap2/sram243x.S | 4 +-
> arch/arm/mach-omap2/sram34xx.S | 5 +-
> arch/arm/plat-omap/counter_32k.c | 1 +
> arch/arm/plat-omap/dma.c | 2 +
> arch/arm/plat-omap/dmtimer.c | 2 +
> arch/arm/plat-omap/include/plat/hardware.h | 6 ++
> arch/arm/plat-omap/include/plat/keypad.h | 2 +
> arch/arm/plat-omap/include/plat/mcspi.h | 3 -
> arch/arm/plat-omap/include/plat/tc.h | 17 ----
> arch/arm/plat-omap/include/plat/usb.h | 41 ++++++++++
> arch/arm/plat-omap/mux.c | 5 +-
> arch/arm/plat-omap/sram.c | 9 +-
> arch/arm/plat-omap/usb.c | 4 +
> drivers/char/hw_random/omap-rng.c | 2 +
> drivers/gpio/gpio-omap.c | 7 --
> drivers/video/omap2/dss/dispc.c | 5 -
> drivers/video/omap2/dss/dss.c | 3 +
> 99 files changed, 446 insertions(+), 280 deletions(-)
> create mode 100644 arch/arm/mach-omap1/iomap.h
> rename arch/arm/{plat-omap/include/plat/io.h => mach-omap2/iomap.h} (77%)
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
More information about the linux-arm-kernel
mailing list