[PATCH v2 06/19] ARM: at91/pm_slowclock: rename register to named define
Nicolas Ferre
nicolas.ferre at atmel.com
Wed Feb 22 04:39:32 EST 2012
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
This patch will give a name to ARM registers in the assembly
source code (using #defines). It is done to simplify the code
reading and the passing of parameters to functions.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
Acked-by: Nicolas Ferre <nicolas.ferre at atmel.com>
---
arch/arm/mach-at91/pm_slowclock.S | 177 +++++++++++++++++++------------------
1 files changed, 91 insertions(+), 86 deletions(-)
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index f8539a8..97124f5 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -46,17 +46,22 @@
#define PLLALOCK_TIMEOUT 1000
#define PLLBLOCK_TIMEOUT 1000
+#define pmc r1
+#define sdramc r2
+#define tmp1 r3
+#define tmp2 r4
+#define ramc1 r5
/*
* Wait until master clock is ready (after switching master clock source)
*/
.macro wait_mckrdy
- mov r4, #MCKRDY_TIMEOUT
-1: sub r4, r4, #1
- cmp r4, #0
+ mov tmp2, #MCKRDY_TIMEOUT
+1: sub tmp2, tmp2, #1
+ cmp tmp2, #0
beq 2f
- ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
- tst r3, #AT91_PMC_MCKRDY
+ ldr tmp1, [pmc, #(AT91_PMC_SR - AT91_PMC)]
+ tst tmp1, #AT91_PMC_MCKRDY
beq 1b
2:
.endm
@@ -65,12 +70,12 @@
* Wait until master oscillator has stabilized.
*/
.macro wait_moscrdy
- mov r4, #MOSCRDY_TIMEOUT
-1: sub r4, r4, #1
- cmp r4, #0
+ mov tmp2, #MOSCRDY_TIMEOUT
+1: sub tmp2, tmp2, #1
+ cmp tmp2, #0
beq 2f
- ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
- tst r3, #AT91_PMC_MOSCS
+ ldr tmp1, [pmc, #(AT91_PMC_SR - AT91_PMC)]
+ tst tmp1, #AT91_PMC_MOSCS
beq 1b
2:
.endm
@@ -79,12 +84,12 @@
* Wait until PLLA has locked.
*/
.macro wait_pllalock
- mov r4, #PLLALOCK_TIMEOUT
-1: sub r4, r4, #1
- cmp r4, #0
+ mov tmp2, #PLLALOCK_TIMEOUT
+1: sub tmp2, tmp2, #1
+ cmp tmp2, #0
beq 2f
- ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
- tst r3, #AT91_PMC_LOCKA
+ ldr tmp1, [pmc, #(AT91_PMC_SR - AT91_PMC)]
+ tst tmp1, #AT91_PMC_LOCKA
beq 1b
2:
.endm
@@ -93,12 +98,12 @@
* Wait until PLLB has locked.
*/
.macro wait_pllblock
- mov r4, #PLLBLOCK_TIMEOUT
-1: sub r4, r4, #1
- cmp r4, #0
+ mov tmp2, #PLLBLOCK_TIMEOUT
+1: sub tmp2, tmp2, #1
+ cmp tmp2, #0
beq 2f
- ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
- tst r3, #AT91_PMC_LOCKB
+ ldr tmp1, [pmc, #(AT91_PMC_SR - AT91_PMC)]
+ tst tmp1, #AT91_PMC_LOCKB
beq 1b
2:
.endm
@@ -117,55 +122,55 @@ ENTRY(at91_slow_clock)
* R4 = temporary register
* R5 = Base address of second RAM Controller or 0 if not present
*/
- ldr r1, .at91_va_base_pmc
- ldr r2, .at91_va_base_sdramc
- ldr r5, .at91_va_base_ramc1
+ ldr pmc, .at91_va_base_pmc
+ ldr sdramc, .at91_va_base_sdramc
+ ldr ramc1, .at91_va_base_ramc1
/* Drain write buffer */
- mov r0, #0
- mcr p15, 0, r0, c7, c10, 4
+ mov tmp1, #0
+ mcr p15, 0, tmp1, c7, c10, 4
#ifdef CONFIG_ARCH_AT91RM9200
/* Put SDRAM in self-refresh mode */
- mov r3, #1
- str r3, [r2, #AT91_SDRAMC_SRR]
+ mov tmp1, #1
+ str tmp1, [sdramc, #AT91_SDRAMC_SRR]
#elif defined(CONFIG_ARCH_AT91SAM9G45)
/* prepare for DDRAM self-refresh mode */
- ldr r3, [r2, #AT91_DDRSDRC_LPR]
- str r3, .saved_sam9_lpr
- bic r3, #AT91_DDRSDRC_LPCB
- orr r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+ ldr tmp1, [sdramc, #AT91_DDRSDRC_LPR]
+ str tmp1, .saved_sam9_lpr
+ bic tmp1, #AT91_DDRSDRC_LPCB
+ orr tmp1, #AT91_DDRSDRC_LPCB_SELF_REFRESH
/* figure out if we use the second ram controller */
- cmp r5, #0
- ldrne r4, [r5, #AT91_DDRSDRC_LPR]
- strne r4, .saved_sam9_lpr1
- bicne r4, #AT91_DDRSDRC_LPCB
- orrne r4, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+ cmp ramc1, #0
+ ldrne tmp2, [ramc1, #AT91_DDRSDRC_LPR]
+ strne tmp2, .saved_sam9_lpr1
+ bicne tmp2, #AT91_DDRSDRC_LPCB
+ orrne tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH
/* Enable DDRAM self-refresh mode */
- str r3, [r2, #AT91_DDRSDRC_LPR]
- strne r4, [r5, #AT91_DDRSDRC_LPR]
+ str tmp1, [sdramc, #AT91_DDRSDRC_LPR]
+ strne tmp2, [ramc1, #AT91_DDRSDRC_LPR]
#else
/* Enable SDRAM self-refresh mode */
- ldr r3, [r2, #AT91_SDRAMC_LPR]
- str r3, .saved_sam9_lpr
+ ldr tmp1, [sdramc, #AT91_SDRAMC_LPR]
+ str tmp1, .saved_sam9_lpr
- bic r3, #AT91_SDRAMC_LPCB
- orr r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
- str r3, [r2, #AT91_SDRAMC_LPR]
+ bic tmp1, #AT91_SDRAMC_LPCB
+ orr tmp1, #AT91_SDRAMC_LPCB_SELF_REFRESH
+ str tmp1, [sdramc, #AT91_SDRAMC_LPR]
#endif
/* Save Master clock setting */
- ldr r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
- str r3, .saved_mckr
+ ldr tmp1, [pmc, #(AT91_PMC_MCKR - AT91_PMC)]
+ str tmp1, .saved_mckr
/*
* Set the Master clock source to slow clock
*/
- bic r3, r3, #AT91_PMC_CSS
- str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
+ bic tmp1, tmp1, #AT91_PMC_CSS
+ str tmp1, [pmc, #(AT91_PMC_MCKR - AT91_PMC)]
wait_mckrdy
@@ -175,61 +180,61 @@ ENTRY(at91_slow_clock)
*
* See AT91RM9200 errata #27 and #28 for details.
*/
- mov r3, #0
- str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
+ mov tmp1, #0
+ str tmp1, [pmc, #(AT91_PMC_MCKR - AT91_PMC)]
wait_mckrdy
#endif
/* Save PLLA setting and disable it */
- ldr r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
- str r3, .saved_pllar
+ ldr tmp1, [pmc, #(AT91_CKGR_PLLAR - AT91_PMC)]
+ str tmp1, .saved_pllar
- mov r3, #AT91_PMC_PLLCOUNT
- orr r3, r3, #(1 << 29) /* bit 29 always set */
- str r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
+ mov tmp1, #AT91_PMC_PLLCOUNT
+ orr tmp1, tmp1, #(1 << 29) /* bit 29 always set */
+ str tmp1, [pmc, #(AT91_CKGR_PLLAR - AT91_PMC)]
/* Save PLLB setting and disable it */
- ldr r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
- str r3, .saved_pllbr
+ ldr tmp1, [pmc, #(AT91_CKGR_PLLBR - AT91_PMC)]
+ str tmp1, .saved_pllbr
- mov r3, #AT91_PMC_PLLCOUNT
- str r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
+ mov tmp1, #AT91_PMC_PLLCOUNT
+ str tmp1, [pmc, #(AT91_CKGR_PLLBR - AT91_PMC)]
/* Turn off the main oscillator */
- ldr r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
- bic r3, r3, #AT91_PMC_MOSCEN
- str r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
+ ldr tmp1, [pmc, #(AT91_CKGR_MOR - AT91_PMC)]
+ bic tmp1, tmp1, #AT91_PMC_MOSCEN
+ str tmp1, [pmc, #(AT91_CKGR_MOR - AT91_PMC)]
/* Wait for interrupt */
- mcr p15, 0, r0, c7, c0, 4
+ mcr p15, 0, tmp1, c7, c0, 4
/* Turn on the main oscillator */
- ldr r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
- orr r3, r3, #AT91_PMC_MOSCEN
- str r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
+ ldr tmp1, [pmc, #(AT91_CKGR_MOR - AT91_PMC)]
+ orr tmp1, tmp1, #AT91_PMC_MOSCEN
+ str tmp1, [pmc, #(AT91_CKGR_MOR - AT91_PMC)]
wait_moscrdy
/* Restore PLLB setting */
- ldr r3, .saved_pllbr
- str r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
+ ldr tmp1, .saved_pllbr
+ str tmp1, [pmc, #(AT91_CKGR_PLLBR - AT91_PMC)]
- tst r3, #(AT91_PMC_MUL & 0xff0000)
+ tst tmp1, #(AT91_PMC_MUL & 0xff0000)
bne 1f
- tst r3, #(AT91_PMC_MUL & ~0xff0000)
+ tst tmp1, #(AT91_PMC_MUL & ~0xff0000)
beq 2f
1:
wait_pllblock
2:
/* Restore PLLA setting */
- ldr r3, .saved_pllar
- str r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
+ ldr tmp1, .saved_pllar
+ str tmp1, [pmc, #(AT91_CKGR_PLLAR - AT91_PMC)]
- tst r3, #(AT91_PMC_MUL & 0xff0000)
+ tst tmp1, #(AT91_PMC_MUL & 0xff0000)
bne 3f
- tst r3, #(AT91_PMC_MUL & ~0xff0000)
+ tst tmp1, #(AT91_PMC_MUL & ~0xff0000)
beq 4f
3:
wait_pllalock
@@ -242,11 +247,11 @@ ENTRY(at91_slow_clock)
*
* See AT91RM9200 errata #27 and #28 for details.
*/
- ldr r3, .saved_mckr
- tst r3, #AT91_PMC_PRES
+ ldr tmp1, .saved_mckr
+ tst tmp1, #AT91_PMC_PRES
beq 2f
- and r3, r3, #AT91_PMC_PRES
- str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
+ and tmp1, tmp1, #AT91_PMC_PRES
+ str tmp1, [pmc, #(AT91_PMC_MCKR - AT91_PMC)]
wait_mckrdy
#endif
@@ -254,8 +259,8 @@ ENTRY(at91_slow_clock)
/*
* Restore master clock setting
*/
-2: ldr r3, .saved_mckr
- str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
+2: ldr tmp1, .saved_mckr
+ str tmp1, [pmc, #(AT91_PMC_MCKR - AT91_PMC)]
wait_mckrdy
@@ -263,18 +268,18 @@ ENTRY(at91_slow_clock)
/* Do nothing - self-refresh is automatically disabled. */
#elif defined(CONFIG_ARCH_AT91SAM9G45)
/* Restore LPR on AT91 with DDRAM */
- ldr r3, .saved_sam9_lpr
- str r3, [r2, #AT91_DDRSDRC_LPR]
+ ldr tmp1, .saved_sam9_lpr
+ str tmp1, [sdramc, #AT91_DDRSDRC_LPR]
/* if we use the second ram controller */
- cmp r5, #0
- ldrne r4, .saved_sam9_lpr1
- strne r4, [r5, #AT91_DDRSDRC_LPR]
+ cmp ramc1, #0
+ ldrne tmp2, .saved_sam9_lpr1
+ strne tmp2, [ramc1, #AT91_DDRSDRC_LPR]
#else
/* Restore LPR on AT91 with SDRAM */
- ldr r3, .saved_sam9_lpr
- str r3, [r2, #AT91_SDRAMC_LPR]
+ ldr tmp1, .saved_sam9_lpr
+ str tmp1, [sdramc, #AT91_SDRAMC_LPR]
#endif
/* Restore registers, and return */
--
1.7.9
More information about the linux-arm-kernel
mailing list