December 2011 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Thu Dec 1 00:53:40 EST 2011
Ending: Sat Dec 31 22:30:06 EST 2011
Messages: 4042

• [PATCH v3 3/5] clk: introduce the common clock framework   Turquette, Mike
• [Linaro-mm-sig] [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanism   Semwal, Sumit
• [RFC] virtio: use mandatory barriers for remote processor vdevs   Ohad Ben-Cohen
• [RFC] virtio: use mandatory barriers for remote processor vdevs   Ohad Ben-Cohen
• [RFC 6/8] of: add clock providers   Shawn Guo
• [PATCH v3 3/5] clk: introduce the common clock framework   Paul Walmsley
• [RFC] virtio: use mandatory barriers for remote processor vdevs   Ohad Ben-Cohen
• [PATCH v7 0/2] iommu/exynos: Add IOMMU/System MMU driver for Samsung Exynos   Kukjin Kim
• [RFC][PATCH] Consolidate Samsung MAINTAINERS   Kukjin Kim
• [PATCH] watchdog: fix initialisation printout in s3c2410_wdt   Kukjin Kim
• [PATCH 2/2] MAINTAINERS: Extend Samsung patterns to cover SPI and ASoC drivers   Kukjin Kim
• [PATCH 2/2] mmc: sdhci-s3c: Add pm_caps into SD/MMC host   Kukjin Kim
• s3c2440 / s3c2416 broken   Kukjin Kim
• [PATCH] ARM: kprobes: Change testcase with unpredictable STRD instruction   Tixy
• [PATCH 1/1 v5] arm: fault.c: Port OOM changes into do_page_fault   Kautuk Consul
• [PATCH] ARM: kprobes: Restrict probing SWP instructions to ARMv5 and below   Tixy
• [RFC V1 3/8] clk: Add support for simple dividers   Richard Zhao
• [PATCH] arm: prevent inlining in arxescsi.c causing build failures   Uwe Kleine-König
• [RFC] virtio: use mandatory barriers for remote processor vdevs   Michael S. Tsirkin
• [PATCH 1/2] arm/imx: fix return type of callback passed to of_irq_init()   Shawn Guo
• [PATCH 2/2] arm/imx: fix irq_base for gpio   Shawn Guo
• [PATCH v3 3/5] clk: introduce the common clock framework   Russell King - ARM Linux
• [PATCH 0/4] PM/Devfreq: Exynos4210 Bus/VDD_int   MyungJoo Ham
• [PATCH 1/4] ARM: EXYNOS4: Add DMC1, allow PPMU access for DMC.   MyungJoo Ham
• [PATCH 2/4] PM/Devfreq: Add Exynos4210-bus device DVFS driver.   MyungJoo Ham
• [PATCH 3/4] ARM Exynos4210-Nuri: remove compiler errors   MyungJoo Ham
• [PATCH 4/4] ARM Exynos4210-Nuri: support Exynos4210-bus Devfreq driver.   MyungJoo Ham
• Fwd: Re: [03: PATCH 0/5] The remaining stuff   Russell King - ARM Linux
• [RFC] virtio: use mandatory barriers for remote processor vdevs   Michael S. Tsirkin
• [PATCH] watchdog: fix initialisation printout in s3c2410_wdt   Wim Van Sebroeck
• [PATCH 0/4] Add device tree support for mc13892 regulator driver   Shawn Guo
• [PATCH v2 1/4] mfd: mc13xxx: add device tree probe support   Shawn Guo
• [PATCH v2 2/4] regulator: pass device_node to of_get_regulator_init_data()   Shawn Guo
• [PATCH v2 3/4] regulator: mc13892: add device tree probe support   Shawn Guo
• [PATCH v2 4/4] arm/imx: add mc13892 support into imx51-babbage.dts   Shawn Guo
• [RFC PATCH 4/6] ARM: Remove __ARCH_WANT_INTERRUPTS_ON_CTXSW on ASID-capable CPUs   Catalin Marinas
• [RFC PATCH 0/6] ARM: Remove the __ARCH_WANT_INTERRUPTS_ON_CTXSW definition   Catalin Marinas
• [PATCH] ARM: Kota2 mach-type update fix   Rafael J. Wysocki
• [PATCH 2a/5] Remove unsafe clock values from omap1_defconfig   Janusz Krzysztofik
• [PATCH 3/3] USB: Add S5P OHCI diver   Kukjin Kim
• [PATCH 2a/5 v2] ARM: OMAP1: select clock rate by CPU type   Janusz Krzysztofik
• [PATCH 0/3] Support Samsung S5P OHCI device and driver   Kukjin Kim
• [PATCH] watchdog: fix initialisation printout in s3c2410_wdt   Kukjin Kim
• [PATCH 2a/5] Remove unsafe clock values from omap1_defconfig   Janusz Krzysztofik
• [Embeddedxen-devel] [Xen-devel] [ANNOUNCE] Xen port to Cortex-A15 / ARMv7 with virt extensions   Ian Campbell
• [RESEND][PATCH] ARM: EXYNOS: Fixed undefined symbol compilation error.   Kukjin Kim
• [PATCH] ARM: S3C64XX: Staticise s3c6400_sysclass   Kukjin Kim
• [PATCH 0/7] Cragganmore updates for 3.3   Kukjin Kim
• [PATCH] ARM: S3C64XX: Add linux/export.h to dev-spi.c   Kukjin Kim
• [PATCH] imx: add polled io uart methods   Dirk Behme
• [Xen-devel] [ANNOUNCE] Xen port to Cortex-A15 / ARMv7 with virt extensions   Ian Campbell
• [PATCH] arm: prevent inlining in arxescsi.c causing build failures   Sergei Shtylyov
• [PATCH] arm: add default value for PHYS_OFFSET Kconfig setting   Sergei Shtylyov
• [PATCH-V4 3/3] arm:omap:am33xx: Add low level debugging support   Hiremath, Vaibhav
• flatmem broken for nommu? [Was: Re: does non-continuous RAM means I need to select the sparse memory model?]   Uwe Kleine-König
• [PATCH v3 3/5] ARM: vexpress: Add DT support in v2m   Dave Martin
• [patch v2 1/1] kirkwood: Add configuration for MPP12 as GPIO   Arnaud Patard (Rtp)
• [RFC][PATCH] ARM: kirkwood: Remove eSATA SheevaPlug board support   Axel Lin
• [patch 1/1] ixp4xx: add io{read,write}{16,32}be functions   Arnaud Patard (Rtp)
• [PATCH-V4 0/3] Introducing TI's New SoC/board AM335XEVM   Hiremath, Vaibhav
• [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support   Mark Brown
• [RFC PATCH 01/11] arm:omap:am33xx: Add voltage domain data   Hiremath, Vaibhav
• [RFC PATCH 02/11] arm:omap:am33xx: Integrate voltage domain data   Hiremath, Vaibhav
• [RFC PATCH 04/11] arm:omap:am33xx: Integrate powerdomain to OMAP power framework   Hiremath, Vaibhav
• [PATCH 0/7] Cragganmore updates for 3.3   Mark Brown
• [RFC][PATCH] ARM: kirkwood: Remove eSATA SheevaPlug board support   Holland, John
• [RFC PATCH 03/11] arm:omap:am33xx: Add power domain data   Hiremath, Vaibhav
• [RFC PATCH 00/11] arm:omap:am33xx: Add basic voltage, power, clock & HWMOD data   Hiremath, Vaibhav
• [PATCH v2] IMX/SDMA : save the real count for one DMA transaction.   Lothar Waßmann
• [RFC PATCH 07/11] arm:omap:am33xx: Add irq, dma and module base addr to SoC header files   Hiremath, Vaibhav
• [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support   Dave Martin
• [PATCH] mx28: LRADC macro rename   Shawn Guo
• [PATCH v3 5/5] ARM: vexpress: DT-based support for CoreTiles Express A5x2 and A9x4   Dave Martin
• [GIT PULL] msm misc changes for 3.3   Arnd Bergmann
• [RFC PATCH 00/11] arm:omap:am33xx: Add basic voltage, power, clock & HWMOD data   Cousson, Benoit
• [linux-next] drivers/i2c/busses/i2c-nuc900.c build error   Axel Lin
• [PATCH] mmc: mmci: Fixup error handling for dma   Linus Walleij
• [PATCH v2 0/6] Consolidate identity mapping code in idmap.c   Will Deacon
• [patch 1/1] ixp4xx: add io{read,write}{16,32}be functions   Arnd Bergmann
• [PATCH 2/2] gpio/tegra: Dynamically allocate IRQ base, and support DT   Rob Herring
• [PATCH] video IPUv1 fixes for different display connections   Sascha Hauer
• [PATCH 1/2] i.MX IPU DMA: Fix wrong burstsize settings   Sascha Hauer
• [PATCH 2/2] video i.MX IPU: Fix display connections   Sascha Hauer
• [PATCH] arm: prevent inlining in arxescsi.c causing build failures   Arnd Bergmann
• s3c2440 / s3c2416 broken   Paul Schilling
• [V2 3/3] ARM: support syscall tracing   Will Deacon
• [PATCH 2/2] gpio/tegra: Dynamically allocate IRQ base, and support DT   Jamie Iles
• [PATCH] arm/imx6: add restart support for imx6q   Sascha Hauer
• [PATCH] arm: add default value for PHYS_OFFSET Kconfig setting   Arnd Bergmann
• [RFC V1 3/8] clk: Add support for simple dividers   Sascha Hauer
• [V2 1/3] ARM: add support for the generic syscall.h interface   Will Deacon
• [V2 2/3] ARM: add TRACEHOOK support   Will Deacon
• [PATCH] arm/imx6: add restart support for imx6q   Shawn Guo
• [PATCH v3 3/5] clk: introduce the common clock framework   Mark Brown
• [RFC PATCH 01/11] arm:omap:am33xx: Add voltage domain data   Kevin Hilman
• [PATCH] ARM: exynos4: Fix for stall in case of cpu hotplug or sleep   amit kachhap
• [RFC PATCH 00/11] arm:omap:am33xx: Add basic voltage, power, clock & HWMOD data   Kevin Hilman
• [PATCH-V4 3/3] arm:omap:am33xx: Add low level debugging support   Kevin Hilman
• [PATCH-V4 0/3] Introducing TI's New SoC/board AM335XEVM   Kevin Hilman
• [Android-virt] [Embeddedxen-devel] [Xen-devel] [ANNOUNCE] Xen port to Cortex-A15 / ARMv7 with virt extensions   Catalin Marinas
• [Embeddedxen-devel] [Xen-devel] [ANNOUNCE] Xen port to Cortex-A15 / ARMv7 with virt extensions   Stefano Stabellini
• [RFC PATCH 00/11] arm:omap:am33xx: Add basic voltage, power, clock & HWMOD data   Kevin Hilman
• [PATCH 1/3] ARM: msm: Remove MSM7x00 support   Daniel Walker
• [PATCH 1/2] ARM: exynos4: Fix build error due to 'gic_bank_offset' undeclared   Axel Lin
• [PATCH 2/2] ARM: exynos4: Fix build error   Axel Lin
• [RFC PATCH 03/11] arm:omap:am33xx: Add power domain data   Kevin Hilman
• flatmem broken for nommu? [Was: Re: does non-continuous RAM means I need to select the sparse memory model?]   Uwe Kleine-König
• [PATCH v3 1/3] ARM: at91/aic: add irq domain and device tree support   Nicolas Ferre
• [Android-virt] [Embeddedxen-devel] [Xen-devel] [ANNOUNCE] Xen port to Cortex-A15 / ARMv7 with virt extensions   Arnd Bergmann
• [Android-virt] [Embeddedxen-devel] [Xen-devel] [ANNOUNCE] Xen port to Cortex-A15 / ARMv7 with virt extensions   Ian Campbell
• [Android-virt] [Embeddedxen-devel] [Xen-devel] [ANNOUNCE] Xen port to Cortex-A15 / ARMv7 with virt extensions   Catalin Marinas
• flatmem broken for nommu? [Was: Re: does non-continuous RAM means I need to select the sparse memory model?]   Stefan Hellermann
• [PATCH] [WATCHDOG] move coh901327 state holders   Linus Walleij
• [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support   Stephen Warren
• [PATCH 1/2] ARM: exynos4: Fix build error due to 'gic_bank_offset' undeclared   Marc Zyngier
• [Android-virt] [Embeddedxen-devel] [Xen-devel] [ANNOUNCE] Xen port to Cortex-A15 / ARMv7 with virt extensions   Arnd Bergmann
• [PATCH 2/2] gpio/tegra: Dynamically allocate IRQ base, and support DT   Stephen Warren
• [PATCH 2/2] gpio/tegra: Dynamically allocate IRQ base, and support DT   Jamie Iles
• [Android-virt] [Embeddedxen-devel] [Xen-devel] [ANNOUNCE] Xen port to Cortex-A15 / ARMv7 with virt extensions   Catalin Marinas
• [PATCH 2a/5] Remove unsafe clock values from omap1_defconfig   Tony Lindgren
• [RFC PATCH] ARM: Add generic instruction opcode manipulation helpers   Rabin Vincent
• [PATCH] ARM: mmci: add capabilities2 for MMC_CAP2   Chris Ball
• [RFC PATCH] ARM: Add generic instruction opcode manipulation helpers   Dave Martin
• [PATCH v3 2/4] ARM: pxa168: Add SDHCI support   Chris Ball
• [PATCH] ARM: ftrace: clear zero bit in reported IPs for Thumb-2   Rabin Vincent
• [PATCH 1/1] mmc: sdhci-esdhc: Change delay after setting clock from 100ms to 1ms   Chris Ball
• [PATCH 1/3] omap_hsmmc: consider MMC_PM_KEEP_POWER on suspend/resume   Chris Ball
• [PATCH 1/3] ARM: msm: Remove MSM7x00 support   David Brown
• [PATCH 2a/5 v2] ARM: OMAP1: select clock rate by CPU type   Tony Lindgren
• [PATCH v3 3/5] clk: introduce the common clock framework   Turquette, Mike
• [PATCH 2/2] arm/imx: fix irq_base for gpio   Troy Kisky
• does non-continuous RAM means I need to select the sparse memory model?   Russell King - ARM Linux
• [PATCH v3 3/5] clk: introduce the common clock framework   Paul Walmsley
• [PATCH v3 3/5] clk: introduce the common clock framework   Mark Brown
• [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support   Russell King - ARM Linux
• [PATCH 2a/5] Remove unsafe clock values from omap1_defconfig   Janusz Krzysztofik
• [PATCH 1/3] ARM: msm: Remove MSM7x00 support   Daniel Walker
• [PATCH 20/62] mmc: remove the second argument of k[un]map_atomic()   Chris Ball
• [PATCH 1/3] PM: Provide an always on power domain governor   Mark Brown
• [PATCH 2/3] ARM: mach-shmobile: Use common always on power domain governor   Mark Brown
• [PATCH 3/3] ARM: S3C64XX: Implement basic power domain support   Mark Brown
• [PATCH 2a/5 v2] ARM: OMAP1: select clock rate by CPU type   Janusz Krzysztofik
• [PATCH v7 0/2] iommu/exynos: Add IOMMU/System MMU driver for Samsung Exynos   'Joerg Roedel'
• [PATCH 2a/5] Remove unsafe clock values from omap1_defconfig   Tony Lindgren
• [PATCH 2a/5 v2] ARM: OMAP1: select clock rate by CPU type   Tony Lindgren
• [PATCH 2a/5] Remove unsafe clock values from omap1_defconfig   Janusz Krzysztofik
• [PATCH 1/3] ARM: msm: Remove MSM7x00 support   David Brown
• [PATCH 1/3] ARM: msm: Remove MSM7x00 support   Daniel Walker
• [RFC PATCH 4/6] ARM: Remove __ARCH_WANT_INTERRUPTS_ON_CTXSW on ASID-capable CPUs   Frank Rowand
• [PATCH 1/3] ARM: msm: Remove MSM7x00 support   David Brown
• [PATCH 2a/5] Remove unsafe clock values from omap1_defconfig   Tony Lindgren
• [PATCH] gpio: fix a build failure on KS8695 GPIO   Mike Frysinger
• [PATCH 1/3] ARM: msm: Remove MSM7x00 support   Daniel Walker
• [PATCH 0/2 v2] ARM: OMAP1: Fix dpll1 reprogramming related issues   Janusz Krzysztofik
• [PATCH 1/2 v2] ARM: OMAP1: Fix ckctl value used for dpll1 defualt rate   Janusz Krzysztofik
• [PATCH 2/2 v2] ARM: OMAP1: recalculate loops per jiffy after dpll1 reprogram   Janusz Krzysztofik
• [PATCH 1/3] ARM: msm: Remove MSM7x00 support   David Brown
• flatmem broken for nommu? [Was: Re: does non-continuous RAM means I need to select the sparse memory model?]   Uwe Kleine-König
• [PATCH 1/3] ARM: msm: Remove MSM7x00 support   Russell King - ARM Linux
• [PATCH 1/3] ARM: msm: Remove MSM7x00 support   Daniel Walker
• [PATCH 1/3] ARM: msm: Remove MSM7x00 support   David Brown
• [PATCH] arm/imx6: add restart support for imx6q   Russell King - ARM Linux
• [PATCH] ARM: OMAP1: Remove unsafe clock values from omap1_defconfig   Janusz Krzysztofik
• [PATCH 1/3] ARM: msm: Remove MSM7x00 support   Daniel Walker
• [PATCH 1/3] ARM: msm: Remove MSM7x00 support   Russell King - ARM Linux
• [PATCH 2/3] ARM: mach-shmobile: Use common always on power domain governor   Rafael J. Wysocki
• [PATCH 1/3] ARM: msm: Remove MSM7x00 support   Daniel Walker
• does non-continuous RAM means I need to select the sparse memory model?   Uwe Kleine-König
• [PATCH 2/2] gpio/tegra: Dynamically allocate IRQ base, and support DT   Stephen Warren
• [PATCH 1/3] ARM: msm: Remove MSM7x00 support   Russell King - ARM Linux
• [PATCH v2] ARM: OMAP1: Update dpll1 default rate reprogramming method   Janusz Krzysztofik
• [PATCH 1/3] ARM: msm: Remove MSM7x00 support   Daniel Walker
• [PATCH v3 3/5] clk: introduce the common clock framework   Russell King - ARM Linux
• [PATCH 2/2] gpio/tegra: Dynamically allocate IRQ base, and support DT   Nicolas Ferre
• [PATCH] ARM: put memblock stuff into init sections   Uwe Kleine-König
• [PATCH] ARM: put memblock stuff into init sections   Russell King - ARM Linux
• [PATCH 3/3] USB: Add S5P OHCI diver   Jingoo Han
• [RFC] virtio: use mandatory barriers for remote processor vdevs   Rusty Russell
• [PATCH 2/3] ARM: mach-shmobile: Use common always on power domain governor   Mark Brown
• [PATCH 3/3] ARM: S3C64XX: Implement basic power domain support   Kyungmin Park
• [PATCH 3/3] ARM: S3C64XX: Implement basic power domain support   Mark Brown
• [PATCH 0/2 v2] ARM: OMAP1: Fix dpll1 reprogramming related issues   Tony Lindgren
• [PATCH 20/62] mmc: remove the second argument of k[un]map_atomic()   Cong Wang
• [PATCH v3] IMX/SDMA : save the real count for one DMA transaction.   Huang Shijie
• [PATCH] mfd: max8998: Use standard device wakeup for handling wakeup device   Kyungmin Park
• [PATCH 2/2] arm/imx: fix irq_base for gpio   Shawn Guo
• [PATCH] SPI: add CSR SiRFprimaII SPI controller driver   Barry Song
• [PATCH-V4 0/3] Introducing TI's New SoC/board AM335XEVM   Mohammed, Afzal
• [PATCH] arm: add default value for PHYS_OFFSET Kconfig setting   Paul Gortmaker
• [PATCH 3/3] ARM: OMAP: hwmod: Look for hwmod/module level context lost count if supported   Rajendra Nayak
• [PATCH] arm: add default value for PHYS_OFFSET Kconfig setting   Nicolas Pitre
• [PATCH] arm: add default value for PHYS_OFFSET Kconfig setting   Nicolas Pitre
• [PATCH 1/1] mmc: sdhci-esdhc: Change delay after setting clock from 100ms to 1ms   Lin Tony-B19295
• [RFC PATCH 03/11] arm:omap:am33xx: Add power domain data   Rajendra Nayak
• [GIT PULL] mxs: fixes (round 2)   Shawn Guo
• [GIT PULL] mxs: saif recording support   Shawn Guo
• [PATCH v3 0/5] ARM: davinci: re-arrange definitions to have a common davinci header   Hadli, Manjunath
• [PATCH-V5 0/3] Introducing TI's New SoC/board AM335XEVM   hvaibhav at ti.com
• [PATCH-V5 1/3] arm:omap:am33xx: Update common OMAP machine specific sources   hvaibhav at ti.com
• [PATCH-V5 2/3] arm:omap:am33xx: Add AM335XEVM machine support   hvaibhav at ti.com
• [PATCH-V5 3/3] arm:omap:am33xx: Add low level debugging support   hvaibhav at ti.com
• [PATCH 1/1] mmc: sdhci-esdhc: Change delay after setting clock from 100ms to 1ms   Huang Changming-R66093
• backlight/ld9040.c: regulator control in the lcd driver   leedonghwa
• [PATCH] ARM: S3C64XX: Remove extern from definition of framebuffer setup call   Kukjin Kim
• [PATCH v7 0/2] iommu/exynos: Add IOMMU/System MMU driver for Samsung Exynos   Kukjin Kim
• [PATCH 1/2] ARM: exynos4: Fix build error due to 'gic_bank_offset' undeclared   Kukjin Kim
• backlight/ld9040.c: regulator control in the lcd driver   Linus Walleij
• [PATCH v7 0/2] iommu/exynos: Add IOMMU/System MMU driver for Samsung Exynos   'Joerg Roedel'
• [RFC v2 0/2] Introduce DMA buffer sharing mechanism   Sumit Semwal
• backlight/ld9040.c: regulator control in the lcd driver   Kyungmin Park
• [PATCH 3/4] ARM Exynos4210-Nuri: remove compiler errors   Kukjin Kim
• [PATCH] ARM: EXYNOS: Enable MDMA driver   Kukjin Kim
• [PATCH 1/4] ARM: EXYNOS4: Add DMC1, allow PPMU access for DMC.   Kukjin Kim
• [RFC PATCH v1 0/7] media&omap4: introduce face detection(FD) driver   Ming Lei
• [RFC PATCH v1 1/7] omap4: introduce fdif(face detect module) hwmod   Ming Lei
• [RFC PATCH v1 2/7] omap4: build fdif omap device from hwmod   Ming Lei
• [RFC PATCH v1 3/7] media: videobuf2: move out of setting pgprot_noncached from vb2_mmap_pfn_range   Ming Lei
• [RFC PATCH v1 4/7] media: videobuf2: introduce VIDEOBUF2_PAGE memops   Ming Lei
• [RFC PATCH v1 5/7] media: v4l2: introduce two IOCTLs for face detection   Ming Lei
• [RFC PATCH v1 6/7] media: video: introduce face detection driver module   Ming Lei
• [RFC PATCH v1 7/7] media: video: introduce omap4 face detection module driver   Ming Lei
• [PATCH 1/4] ARM: EXYNOS4: Add DMC1, allow PPMU access for DMC.   Kyungmin Park
• [RFC PATCH 03/11] arm:omap:am33xx: Add power domain data   Rajendra Nayak
• [PATCHv7 0/3] I2C driver updates   Shubhrajyoti D
• [PATCHv7 1/3] OMAP: I2C: Reset support   Shubhrajyoti D
• [PATCHv7 2/3] OMAP: I2C: Remove the reset in the init path   Shubhrajyoti D
• [PATCHv7 3/3] OMAP: I2C: Remove the SYSC register definition   Shubhrajyoti D
• [PATCH] arm: add default value for PHYS_OFFSET Kconfig setting   Uwe Kleine-König
• [PATCH 3/4] ARM Exynos4210-Nuri: remove compiler errors   MyungJoo Ham
• [PATCH 1/2] ARM: exynos4: Fix build error due to 'gic_bank_offset' undeclared   Marc Zyngier
• [PATCH 0/5] ASoC: OMAP4: Device tree support for DMIC, McPDM   Peter Ujfalusi
• [PATCH 1/5] ASoC: omap-dmic: Add device tree bindings   Peter Ujfalusi
• [PATCH 2/5] ASoC: omap-mcpdm: Add device tree bindings   Peter Ujfalusi
• [PATCH 3/5] OMAP4: devices: Do not create dmic device if the dtb has been provided   Peter Ujfalusi
• [PATCH 4/5] OMAP4: devices: Do not create mcpdm device if the dtb has been provided   Peter Ujfalusi
• [PATCH 5/5] ARM: OMAP4: DTS: Support for dmic, and McPDM in device tree   Peter Ujfalusi
• Building of arch/arm/plat-mxc/ssi-fiq.S failed w/ THUMB2 enabled?   Eric Miao
• backlight/ld9040.c: regulator control in the lcd driver   Linus Walleij
• backlight/ld9040.c: regulator control in the lcd driver   Kyungmin Park
• Building of arch/arm/plat-mxc/ssi-fiq.S failed w/ THUMB2 enabled?   Uwe Kleine-König
• [RFC PATCH v1 0/7] media&omap4: introduce face detection(FD) driver   Sylwester Nawrocki
• backlight/ld9040.c: regulator control in the lcd driver   Mark Brown
• backlight/ld9040.c: regulator control in the lcd driver   Linus Walleij
• [GIT PULL] Fixes for the irqchip-consolidation tree   Marc Zyngier
• backlight/ld9040.c: regulator control in the lcd driver   Mark Brown
• [PATCH V4 00/14] add clk_prepare/clk_unprepare to imx drivers   Richard Zhao
• [PATCH] ARM: pxa: fix error handling in pxa2xx_drv_pcmcia_probe   Axel Lin
• 答复: [PATCH] pinctrl: SIRF: fix pin number typo for SPI1   Barry Song
• [PATCH V4 00/14] add clk_prepare/clk_unprepare to imx drivers   Richard Zhao
• [RFC PATCH v1 2/7] omap4: build fdif omap device from hwmod   Sergei Shtylyov
• [PATCH 1/5] ASoC: omap-dmic: Add device tree bindings   Mark Brown
• [PATCH 1/5] ASoC: omap-dmic: Add device tree bindings   Cousson, Benoit
• [PATCH 1/5] ASoC: omap-dmic: Add device tree bindings   Peter Ujfalusi
• [RFC PATCH v1 5/7] media: v4l2: introduce two IOCTLs for face detection   Arnd Bergmann
• [PATCH v3 0/5] ARM: davinci: re-arrange definitions to have a common davinci header   Nori, Sekhar
• [PATCH] ARM: ftrace: clear zero bit in reported IPs for Thumb-2   Dave Martin
• [PATCH] irqdomain: protect macro variable in domain iterators   Dave Martin
• [PATCH 1/5] ASoC: omap-dmic: Add device tree bindings   Mark Brown
• [PATCH 1/3] ARM: msm: Remove MSM7x00 support   Denis 'GNUtoo' Carikli
• [PATCH v12] AT91: Add a driver for the ADC   Maxime Ripard
• [PATCH 1/3] ARM: AT91: Add platform data for the ADCs   Maxime Ripard
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Maxime Ripard
• [PATCH 3/3] ARM: AT91: Add the ADC to the sam9g20ek board   Maxime Ripard
• [PATCH] irqdomain: protect macro variable in domain iterators   Nicolas Ferre
• [PATCH v2] irqdomain: protect macro variable in domain iterators   Nicolas Ferre
• [PATCH 1/5] ASoC: omap-dmic: Add device tree bindings   Cousson, Benoit
• Building of arch/arm/plat-mxc/ssi-fiq.S failed w/ THUMB2 enabled?   Dave Martin
• [PATCH v2] irqdomain: protect macro variable in domain iterators   Dave Martin
• [PATCH] irqdomain: protect macro variable in domain iterators   Rob Herring
• [PATCH] irqdomain: protect macro variable in domain iterators   Nicolas Ferre
• [PATCH 1/5] ASoC: omap-dmic: Add device tree bindings   Mark Brown
• [PATCH] ARM: add EDAC atomic_scrub function   Rob Herring
• [PATCH] ARM: add EDAC atomic_scrub function   Rob Herring
• [PATCH] irqdomain: protect macro variable in domain iterators   Dave Martin
• [PATCH 1/5] ASoC: omap-dmic: Add device tree bindings   Cousson, Benoit
• [RFC PATCH v1 0/7] media&omap4: introduce face detection(FD) driver   Ming Lei
• [RFC PATCH v1 0/7] media&omap4: introduce face detection(FD) driver   Ming Lei
• [RFC PATCH v1 1/7] omap4: introduce fdif(face detect module) hwmod   Ming Lei
• [RFC PATCH v1 2/7] omap4: build fdif omap device from hwmod   Ming Lei
• [RFC PATCH v1 3/7] media: videobuf2: move out of setting pgprot_noncached from vb2_mmap_pfn_range   Ming Lei
• [RFC PATCH v1 4/7] media: videobuf2: introduce VIDEOBUF2_PAGE memops   Ming Lei
• [RFC PATCH v1 5/7] media: v4l2: introduce two IOCTLs for face detection   Ming Lei
• [RFC PATCH v1 6/7] media: video: introduce face detection driver module   Ming Lei
• [RFC PATCH v1 7/7] media: video: introduce omap4 face detection module driver   Ming Lei
• [PATCH 1/3] ARM: msm: Remove MSM7x00 support   David Brown
• [PATCH 1/5] ASoC: omap-dmic: Add device tree bindings   Mark Brown
• [PATCH v2 1/4] mfd: mc13xxx: add device tree probe support   Mark Brown
• [PATCH] ARM: S3C64XX: Define some additional always off clocks   Mark Brown
• [PATCH] ARM: mach-davinci: fixed name and parent of pll1 sysclock6   Nori, Sekhar
• No subject   Will Deacon
• [GIT PULL] Identity mapping changes for 3.3   Will Deacon
• your mail   Will Deacon
• [RFC PATCH v1 2/7] omap4: build fdif omap device from hwmod   Aguirre, Sergio
• [PATCH] arm: omap: rx51: enable tsc2005 touchscreen   Aaro Koskinen
• [PATCH] arm: add default value for PHYS_OFFSET Kconfig setting   Paul Gortmaker
• [RFC PATCH v1 4/7] media: videobuf2: introduce VIDEOBUF2_PAGE memops   Aguirre, Sergio
• [PATCH] ARM: perf: don't assign platform_device on unsupported CPUs   Will Deacon
• [PATCHv2 0/7]ARM: OMAP3PLUS PM: Add IO DaisyChain support via hwmod mux   Vishwanath Sripathy
• [PATCH 0/2 v2] ARM: OMAP1: Fix dpll1 reprogramming related issues   Janusz Krzysztofik
• [GIT PULL] ARM perf updates for 3.3   Will Deacon
• [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Konrad Rzeszutek Wilk
• [PATCH v3 3/5] clk: introduce the common clock framework   Paul Walmsley
• [PATCH] net/macb: add DT support   Nicolas Ferre
• [PATCH] net/macb: add DT support   Jamie Iles
• [PATCH-V4 0/3] Introducing TI's New SoC/board AM335XEVM   Kevin Hilman
• [RFC PATCH 03/11] arm:omap:am33xx: Add power domain data   Kevin Hilman
• [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support   Stephen Warren
• [PATCH v2] net/macb: add DT support   Nicolas Ferre
• [GIT PULL] cpufreq: OMAP: move to drivers/cpufreq and updates for v3.3   Kevin Hilman
• [PATCH] ARM: at91/net: add macb ethernet controller in 9g45 DT   Nicolas Ferre
• [GIT PULL] cpufreq: OMAP: move to drivers/cpufreq and updates for v3.3   Dave Jones
• [PATCH] net/macb: add DT support   Nicolas Ferre
• [PATCH v2] net/macb: add DT support   David Miller
• [RFC PATCH 03/11] arm:omap:am33xx: Add power domain data   Nori, Sekhar
• [GIT PULL] Linux support for ARM LPAE   Catalin Marinas
• [PATCH 3/3] ARM: S3C64XX: Implement basic power domain support   Tomasz Figa
• [PATCH] arm: omap: rm-680: fix the panic during boot   Aaro Koskinen
• [PATCH 3/3] ARM: S3C64XX: Implement basic power domain support   Mark Brown
• [PATCH 3/3] ARM: S3C64XX: Implement basic power domain support   Tomasz Figa
• [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support   Marek Vasut
• [PATCH] arm: add default value for PHYS_OFFSET Kconfig setting   Uwe Kleine-König
• [PATCH] ARM: S3C64XX: Define some additional always off clocks   Tomasz Figa
• [PATCH] arm: add default value for PHYS_OFFSET Kconfig setting   Nicolas Pitre
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Linus Torvalds
• [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support   Dave Martin
• [PATCH] ARM: S3C64XX: Define some additional always off clocks   Mark Brown
• [PATCH] i2c-mxs: fix compile warning in mxs_i2c_xfer()   Marek Vasut
• [GIT PULL] cpufreq: OMAP: move to drivers/cpufreq and updates for v3.3   Dave Jones
• [PATCH] ARM: S3C64XX: Define some additional always off clocks   Tomasz Figa
• [PATCH 3/3] ARM: S3C64XX: Implement basic power domain support   Sylwester Nawrocki
• [PATCH 07/23] ARM: plat-omap: remove arch specific special handling for ioremap   Tony Lindgren
• [PATCH v3 3/5] clk: introduce the common clock framework   Russell King - ARM Linux
• [PATCH] ARM: determine PHYS_OFFSET automatically for no-mmu configs   Uwe Kleine-König
• [PATCH v3 3/5] clk: introduce the common clock framework   Uwe Kleine-König
• [PATCH 3/3] ARM: S3C64XX: Implement basic power domain support   Mark Brown
• [PATCH] ARM: S3C64XX: Define some additional always off clocks   Mark Brown
• [GIT PULL] cpufreq: OMAP: move to drivers/cpufreq and updates for v3.3   Kevin Hilman
• [RFC PATCH 03/11] arm:omap:am33xx: Add power domain data   Kevin Hilman
• [PATCH] ARM: S3C64XX: Define some additional always off clocks   Tomasz Figa
• [PATCHv7 2/3] OMAP: I2C: Remove the reset in the init path   Jon Hunter
• [PATCH 07/23] ARM: plat-omap: remove arch specific special handling for ioremap   Nicolas Pitre
• [PATCHv7 2/3] OMAP: I2C: Remove the reset in the init path   Jon Hunter
• [PATCH 5/7] fb: pxa: support pinmux operation   Florian Tobias Schandinat
• [PATCH] ARM: determine PHYS_OFFSET automatically for no-mmu configs   Nicolas Pitre
• [PATCH] ARM: S3C64XX: Define some additional always off clocks   Mark Brown
• [PATCH 2/3] ARM: mach-shmobile: Use common always on power domain governor   Rafael J. Wysocki
• [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support   Nicolas Pitre
• [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support   Marek Vasut
• [RFC] virtio: use mandatory barriers for remote processor vdevs   Benjamin Herrenschmidt
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Benjamin Herrenschmidt
• [PATCH v3 3/5] clk: introduce the common clock framework   Paul Walmsley
• [RFC] virtio: use mandatory barriers for remote processor vdevs   Rusty Russell
• [PATCH v2] sanbox: add linux_execve and linux_exec command   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: at91/net: add macb ethernet controller in 9g45 DT   Jean-Christophe PLAGNIOL-VILLARD
• [RFC] virtio: use mandatory barriers for remote processor vdevs   Ohad Ben-Cohen
• [GIT PULL] Identity mapping changes for 3.3   Russell King - ARM Linux
• [PATCH 6/7] ARM: restart: only perform setup for restart when soft-restarting   Kukjin Kim
• [PATCH 3/4] ARM Exynos4210-Nuri: remove compiler errors   Kukjin Kim
• [GIT PULL] ARM perf updates for 3.3   Russell King - ARM Linux
• [PATCH 1/4] ARM: EXYNOS4: Add DMC1, allow PPMU access for DMC.   Kukjin Kim
• [PATCH 6/7] ARM: restart: only perform setup for restart when soft-restarting   Russell King - ARM Linux
• [PATCH 6/7] ARM: restart: only perform setup for restart when soft-restarting   Kukjin Kim
• [GIT PULL] Identity mapping changes for 3.3   Will Deacon
• [PATCH 3/3] ARM: EXYNOS4: Support ASV for Exynos4210   Kukjin Kim
• [PATCH V2 0/3] ASV support for Exynos4 series   Kukjin Kim
• [GIT PULL] ARM perf updates for 3.3   Will Deacon
• [PATCHv7 2/3] OMAP: I2C: Remove the reset in the init path   Shubhrajyoti
• [PATCH 2/3] ARM: mach-shmobile: Use common always on power domain governor   Mark Brown
• [PATCH] ARM: S3C64xx: Power gate unused domains   Kukjin Kim
• [PATCH 1/5] ASoC: omap-dmic: Add device tree bindings   Mark Brown
• [RFC][PATCH] ARM: kirkwood: Remove eSATA SheevaPlug board support   Tixy
• [RFC][PATCH] ARM: kirkwood: Remove eSATA SheevaPlug board support   Nicolas Pitre
• [PATCH v2] sanbox: add linux_execve and linux_exec command   Thomas Petazzoni
• [PATCH 2/3] ARM: mach-shmobile: Use common always on power domain governor   Rafael J. Wysocki
• [GIT PULL] ARM perf updates for 3.3   Russell King - ARM Linux
• [PATCH 2/3] ARM: mach-shmobile: Use common always on power domain governor   Mark Brown
• [PATCH v2] ARM: mach-shmobile: Use common always on power domain governor   Mark Brown
• [PATCH] arm, da8xx, mmc: set second MMC controllers default queue   Heiko Schocher
• [PATCH] arm,davinci: configure davinci aemif chipselects through OF   Heiko Schocher
• [PATCH v5 3/4] regulator: pass additional of_node to regulator_register()   Thomas Abraham
• [PATCH-RFC 04/10] arm: switch to GENERIC_PCI_IOMAP   Michael S. Tsirkin
• [RFC PATCH v1 5/7] media: v4l2: introduce two IOCTLs for face detection   Ming Lei
• [RFC PATCH 1/3] pinctrl: imx: add pinmux imx core driver   Dong Aisheng
• [RFC PATCH 2/3] pinctrl: imx: add pinmux-imx53 support   Dong Aisheng
• [RFC PATCH 3/3] pinctrl: imx: add pinmux-imx6q support   Dong Aisheng
• [PATCH] arm, da8xx, mmc: set second MMC controllers default queue   Sergei Shtylyov
• [PATCH] ARM: OMAP1: Move dpll1 rates selection from config to runtime   Janusz Krzysztofik
• [PATCH] arm, davinci: configure davinci aemif chipselects through OF   Sergei Shtylyov
• [PATCH] arm, davinci: configure davinci aemif chipselects through OF   Sergei Shtylyov
• [PATCH v5 1/4] regulator: helper routine to extract regulator_init_data   Thomas Abraham
• [PATCH] arm, da8xx, mmc: set second MMC controllers default queue   Rajashekhara, Sudhakar
• [PATCH] ARM: OMAP1: Always reprogramme dpll1 rate at boot.   Janusz Krzysztofik
• [PATCHv5] atomic: add *_dec_not_zero   Sven Eckelmann
• [PATCH v5 1/4] regulator: helper routine to extract regulator_init_data   Mark Brown
• [RFC PATCH 2/3] pinctrl: imx: add pinmux-imx53 support   Sascha Hauer
• [PATCH] imx: add polled io uart methods   Dirk Behme
• [PATCH 2/3] ARM: mach-shmobile: Use common always on power domain governor   Rafael J. Wysocki
• [PATCH 1/3] PM: Provide an always on power domain governor   Rafael J. Wysocki
• [PATCH-RFC 04/10] arm: switch to GENERIC_PCI_IOMAP   Russell King - ARM Linux
• [PATCHv5] atomic: add *_dec_not_zero   Russell King - ARM Linux
• [PATCHv5] atomic: add *_dec_not_zero   Sven Eckelmann
• [PATCHv5] atomic: add *_dec_not_zero   Russell King - ARM Linux
• [PATCHv5] atomic: add *_dec_not_zero   Benjamin Herrenschmidt
• [PATCHv5] atomic: add *_dec_not_zero   Sven Eckelmann
• [PATCH 1/3] PM: Provide an always on power domain governor   Mark Brown
• [PATCHv5] atomic: add *_dec_not_zero   H. Peter Anvin
• [PATCH 1/3] PM: Provide an always on power domain governor   Mark Brown
• [PATCH 1/3] PM: Provide an always on power domain governor   Rafael J. Wysocki
• [PATCH] ARM: MM: Configure the number of banks   Boojin Kim
• [RFC PATCH v1 4/7] media: videobuf2: introduce VIDEOBUF2_PAGE memops   Ming Lei
• [PATCH] arm/imx: fix power button on imx51 babbage board   Shawn Guo
• [RFC PATCH 2/3] pinctrl: imx: add pinmux-imx53 support   Dong Aisheng
• [PATCH] ARM: mx5: use generic irq chip pm interface for pm functions on   Shawn Guo
• [PATCH v3] IMX/SDMA : save the real count for one DMA transaction.   Vinod Koul
• [PATCH] dmaengine/amba-pl08x: Config ccfg and increment phychan_hold if phychan is true   Vinod Koul
• [PATCH 0/6] arm/imx: kill macro MXC_GPIO_IRQ_START   Shawn Guo
• [PATCH] ARM: mx5: use generic irq chip pm interface for pm functions on   Shawn Guo
• [PATCH 1/6] irqdomain: export irq_domain_simple_ops for !CONFIG_OF   Shawn Guo
• [PATCH 2/6] arm/imx: eliminate macro IMX_GPIO_TO_IRQ()   Shawn Guo
• [PATCH 3/6] arm/imx: eliminate macro IOMUX_TO_IRQ()   Shawn Guo
• [PATCH 4/6] arm/imx: eliminate macro IRQ_GPIOx()   Shawn Guo
• [PATCH 5/6] gpio/mxc: adopt irq_domain in gpio driver   Shawn Guo
• [PATCH 6/6] arm/imx: remove macro MXC_GPIO_IRQ_START   Shawn Guo
• [PATCH 2/2] gpio/tegra: Dynamically allocate IRQ base, and support DT   Shawn Guo
• [RFC PATCH v1 2/7] omap4: build fdif omap device from hwmod   Ming Lei
• [PATCH] ARM: mx5: use generic irq chip pm interface for pm functions on   Shawn Guo
• [RFC PATCH v1 2/7] omap4: build fdif omap device from hwmod   Ming Lei
• [PATCH 2/2] gpio/tegra: Dynamically allocate IRQ base, and support DT   Shawn Guo
• [PATCH 3/4] ARM Exynos4210-Nuri: remove compiler errors   MyungJoo Ham
• [PATCH v2] arm/imx6: add restart support for imx6q   Shawn Guo
• [PATCH v2 1/4] mfd: mc13xxx: add device tree probe support   Shawn Guo
• [PATCH 2/2] gpio/tegra: Dynamically allocate IRQ base, and support DT   Shawn Guo
• [PATCH v5 3/4] regulator: pass additional of_node to regulator_register()   Rajendra Nayak
• [RFC PATCH 2/3] pinctrl: imx: add pinmux-imx53 support   Sascha Hauer
• [PATCH 0/6] arm/imx: kill macro MXC_GPIO_IRQ_START   Sascha Hauer
• [PATCH] backlight: add regulator support for platform_lcd driver   Thomas Abraham
• [PATCH v2] ARM: restart: davinci: use new restart hook   Nori, Sekhar
• [PATCH 2/2] arm: exynos: allow platform-lcd driver to control lcd regulator source on origen   Thomas Abraham
• [PATCH] backlight: add regulator support for platform_lcd driver   Felipe Balbi
• [PATCH v2] ARM: restart: davinci: use new restart hook   Russell King - ARM Linux
• [PATCH] pcmcia: pxa: replace IRQ_GPIO() with gpio_to_irq()   Axel Lin
• [PATCH] pcmcia: pxa: replace IRQ_GPIO() with gpio_to_irq()   Eric Miao
• [PATCH v5 1/4] regulator: helper routine to extract regulator_init_data   Thomas Abraham
• [PATCH] backlight: add regulator support for platform_lcd driver   Thomas Abraham
• [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Semwal, Sumit
• [PATCH] pcmcia: pxa: replace IRQ_GPIO() with gpio_to_irq()   Marek Vasut
• [PATCH] backlight: add regulator support for platform_lcd driver   Kyungmin Park
• [PATCH 2/2] arm: exynos: allow platform-lcd driver to control lcd regulator source on origen   Kyungmin Park
• [PATCH] backlight: add regulator support for platform_lcd driver   Mark Brown
• [PATCH v5 1/4] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH] backlight: add regulator support for platform_lcd driver   Thomas Abraham
• [PATCH v5 1/4] regulator: helper routine to extract regulator_init_data   Thomas Abraham
• [PATCH] arm, da8xx, mmc: set second MMC controllers default queue   Heiko Schocher
• [PATCH 2/2] arm: exynos: allow platform-lcd driver to control lcd regulator source on origen   Thomas Abraham
• [PATCH] arm, davinci: configure davinci aemif chipselects through OF   Heiko Schocher
• [PATCH] backlight: add regulator support for platform_lcd driver   Mark Brown
• [PATCH v5 1/4] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH v2] pcmcia: pxa: replace IRQ_GPIO() with gpio_to_irq()   Axel Lin
• [PATCH V4 0/5] ARM: exynos: Add l2 retention mode cpuidle state   Amit Daniel Kachhap
• [PATCH V4 1/5] ARM: exynos: Add support AFTR mode on EXYNOS4210   Amit Daniel Kachhap
• [PATCH V4 2/5] ARM: exynos: save L2 settings during bootup   Amit Daniel Kachhap
• [PATCH V4 3/5] ARM: s5p: add L2 early resume code   Amit Daniel Kachhap
• [PATCH V4 4/5] ARM: exynos: remove useless code to save/restore L2   Amit Daniel Kachhap
• [PATCH V4 5/5] ARM: exynos: Enable l2 configuration through device tree   Amit Daniel Kachhap
• [PATCH v5 1/4] regulator: helper routine to extract regulator_init_data   Thomas Abraham
• [GIT PULL] ARM perf updates for 3.3   Will Deacon
• [PATCH v2] pcmcia: pxa: replace IRQ_GPIO() with gpio_to_irq()   Haojian Zhuang
• [PATCH v2] net/macb: add DT support   Nicolas Ferre
• [PATCH] ARM: at91/net: add macb ethernet controller in 9g45 DT   Nicolas Ferre
• [PATCHv5] atomic: add *_dec_not_zero   David Laight
• [PATCH] net/macb: add DT support   Jamie Iles
• [PATCH] arm, davinci: configure davinci aemif chipselects through OF   Heiko Schocher
• [PATCH] net/macb: add DT support   Nicolas Ferre
• [PATCH v3 1/2] net/macb: add DT support for Cadence macb/gem driver   Nicolas Ferre
• [PATCH v3 2/2] ARM: at91/net: add macb ethernet controller in 9g45 DT   Nicolas Ferre
• [GIT PULL] DaVinci fixes for v3.2-rc   Nori, Sekhar
• [PATCH] ARM: mxc: cpufreq.c: include missing module.h header   Hector Oron
• [PATCH 5/7] fb: pxa: support pinmux operation   Linus Walleij
• [RFC PATCH 1/3] pinctrl: imx: add pinmux imx core driver   Linus Walleij
• [PATCH 2/2] gpio/tegra: Dynamically allocate IRQ base, and support DT   Rob Herring
• [PATCH 1/5] ASoC: omap-dmic: Add device tree bindings   Peter Ujfalusi
• [PATCH] gpio: fix a build failure on KS8695 GPIO   Linus Walleij
• [PATCH v8 REPOST 17/24] gpio/omap: fix debounce clock handling   DebBarma, Tarun Kanti
• [RFC 0/5] OMAP groundwork for IOMMU-based DMA API   Ohad Ben-Cohen
• [PATCH 0/3] of: Add support for named irq and reg   Benoit Cousson
• [PATCH 1/3] of/base: Take NULL string into account for property with multiple strings   Benoit Cousson
• [PATCH 2/3] of/address: Add reg-names property to name an iomem resource   Benoit Cousson
• [PATCH 3/3] of/irq: Add interrupts-names property to name an irq resource   Benoit Cousson
• [PATCH 0/6] arm/imx: kill macro MXC_GPIO_IRQ_START   Arnd Bergmann
• [RFC PATCH v1 5/7] media: v4l2: introduce two IOCTLs for face detection   Arnd Bergmann
• [PATCH 2/2] gpio/tegra: Dynamically allocate IRQ base, and support DT   Shawn Guo
• [PATCH] net/fec: fix the use of pdev->id   Shawn Guo
• [RFC 0/5] OMAP groundwork for IOMMU-based DMA API   Roedel, Joerg
• [PATCH v3 2/2] ARM: at91/net: add macb ethernet controller in 9g45 DT   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5] ASoC: omap-dmic: Add device tree bindings   Mark Brown
• [PATCH v7 0/2] iommu/exynos: Add IOMMU/System MMU driver for Samsung Exynos   Joerg Roedel
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Dave Martin
• [PATCH v3 3/5] ARM: vexpress: Add DT support in v2m   Dave Martin
• [PATCH v3 3/5] ARM: vexpress: Add DT support in v2m   Pawel Moll
• [RFC PATCH 2/3] pinctrl: imx: add pinmux-imx53 support   Linus Walleij
• [PATCH] mmc: mmci: Fixup error handling for dma   Ulf Hansson
• [RFC PATCH 2/3] pinctrl: imx: add pinmux-imx53 support   Linus Walleij
• [RFC PATCH 2/3] pinctrl: imx: add pinmux-imx53 support   Linus Walleij
• [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Arnd Bergmann
• [PATCH 2/2] gpio/tegra: Dynamically allocate IRQ base, and support DT   Stephen Warren
• [PATCH] ARM: S3C64XX: Hook up VDDINT on Cragganmore   Mark Brown
• [PATCH v3 5/5] ARM: vexpress: DT-based support for CoreTiles Express A5x2 and A9x4   Pawel Moll
• [PATCH] ARM: S3C64XX: Gate some more clocks by default   Mark Brown
• [PATCH 00/14] mmc: mmci: Improved PM support, cleanup and bugfixes   Ulf Hansson
• [PATCH 01/14] mmc: mmci: Support MMC_PM_KEEP_POWER   Ulf Hansson
• [PATCH 02/14] mmc: mmci: Fixup handling of MCI_STARTBITERR   Ulf Hansson
• [PATCH 03/14] mmc: mmci: Increase max_segs from 16 to 128   Ulf Hansson
• [PATCH 04/14] mmc: mmci: Do not release spinlock in request_end   Ulf Hansson
• [PATCH 05/14] mmc: mmci: Put power register deviations in variant data   Ulf Hansson
• [PATCH 06/14] mmc: mmci: Provide option to configure bus signal direction   Ulf Hansson
• [PATCH 07/14] mmc: mmci: Change vdd_handler to a generic ios_handler   Ulf Hansson
• [PATCH 08/14] mmc: mmci: Fixup error handling for dma   Ulf Hansson
• [PATCH 09/14] mmc: mmci: Change from using legacy suspend   Ulf Hansson
• [PATCH 10/14] mmc: mmci: Cache MMCICLOCK and MMCIPOWER register   Ulf Hansson
• [PATCH 11/14] mmc: mmci: Fixup use of runtime PM and use autosuspend   Ulf Hansson
• [PATCH 12/14] mmc: mmci: Decrease current consumption in suspend   Ulf Hansson
• [PATCH 13/14] mmc: mmci: Implement PM runtime callbacks to save power   Ulf Hansson
• [PATCH 14/14] mmc: mmci: Use ios_handler to save power   Ulf Hansson
• [PATCH v3 5/5] ARM: vexpress: DT-based support for CoreTiles Express A5x2 and A9x4   Dave Martin
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Nicolas Pitre
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Alan Cox
• [PATCH v3 5/5] ARM: vexpress: DT-based support for CoreTiles Express A5x2 and A9x4   Pawel Moll
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Dave Martin
• [PATCH v3 5/5] ARM: vexpress: DT-based support for CoreTiles Express A5x2 and A9x4   Dave Martin
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Geert Uytterhoeven
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Nicolas Pitre
• [PATCH 1/2] [CPUFREQ] s3c64xx: Use pr_fmt() for consistent log messages   Mark Brown
• [PATCH 2/2] [CPUFREQ] s3c64xx: Add VDDINT voltage scaling   Mark Brown
• [PATCH v2 2/4] regulator: pass device_node to of_get_regulator_init_data()   Thomas Abraham
• [PATCHv3 3/2] ARM: msm: Drop useless teq from DEBUG_LL support   Stephen Boyd
• [PATCHv3 3/2] ARM: msm: Drop useless teq from DEBUG_LL support   Nicolas Pitre
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Alan Cox
• [PATCH 2/2] [CPUFREQ] s3c64xx: Add VDDINT voltage scaling   Tomasz Figa
• [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Daniel Vetter
• [PATCH 2/2] [CPUFREQ] s3c64xx: Add VDDINT voltage scaling   Mark Brown
• [PATCH v2 1/4] mfd: mc13xxx: add device tree probe support   Mark Brown
• [PATCH 2/2] [CPUFREQ] s3c64xx: Add VDDINT voltage scaling   Tomasz Figa
• [PATCH] [WATCHDOG] move coh901327 state holders   Wim Van Sebroeck
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Rob Herring
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   James Bottomley
• [PATCH 2/2] [CPUFREQ] s3c64xx: Add VDDINT voltage scaling   Mark Brown
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Dave Martin
• [PATCH v2 2/4] regulator: pass device_node to of_get_regulator_init_data()   Mark Brown
• [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Arnd Bergmann
• [PATCH 2/2] [CPUFREQ] s3c64xx: Add VDDINT voltage scaling   Tomasz Figa
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Nicolas Pitre
• [PATCH 2/2] [CPUFREQ] s3c64xx: Add VDDINT voltage scaling   Mark Brown
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Anton Vorontsov
• [PATCH] ARM: make head.S register assignments more convenient   Nicolas Pitre
• [PATCH] ARM: S3C64XX: Add basic cpuidle driver   Mark Brown
• [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Rob Clark
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Rob Herring
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Alan Cox
• [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Daniel Vetter
• [GIT PULL] ARM perf updates for 3.3   Russell King - ARM Linux
• [PATCH v3 3/5] clk: introduce the common clock framework   Paul Walmsley
• [RFC PATCH 2/3] pinctrl: imx: add pinmux-imx53 support   Sascha Hauer
• realview compulsory enables CONFIG_ARM_PATCH_PHYS_VIRT on me   Linus Walleij
• [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Daniel Vetter
• [RFC PATCH v1 6/7] media: video: introduce face detection driver module   Sylwester Nawrocki
• realview compulsory enables CONFIG_ARM_PATCH_PHYS_VIRT on me   Rob Herring
• [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Arnd Bergmann
• realview compulsory enables CONFIG_ARM_PATCH_PHYS_VIRT on me   Nicolas Pitre
• [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Arnd Bergmann
• [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Rob Clark
• [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Rob Clark
• [RFC PATCH v1 5/7] media: v4l2: introduce two IOCTLs for face detection   Sylwester Nawrocki
• [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Daniel Vetter
• [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Daniel Vetter
• [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Rob Clark
• [GIT PULL] ARM perf updates for 3.3   Tony Lindgren
• [PATCH] ARM: S3C64XX: Hook up VDDINT on Cragganmore   Kyungmin Park
• [PATCH 07/23] ARM: plat-omap: remove arch specific special handling for ioremap   Tony Lindgren
• [GIT PULL] Identity mapping changes for 3.3   Russell King - ARM Linux
• [PATCH v7 0/2] iommu/exynos: Add IOMMU/System MMU driver for Samsung Exynos   Kyungmin Park
• realview compulsory enables CONFIG_ARM_PATCH_PHYS_VIRT on me   Russell King - ARM Linux
• [PATCH v3 3/5] clk: introduce the common clock framework   Turquette, Mike
• [PATCH v3 3/5] clk: introduce the common clock framework   Russell King - ARM Linux
• [PATCH 07/23] ARM: plat-omap: remove arch specific special handling for ioremap   Russell King - ARM Linux
• [GIT PULL] ARM perf updates for 3.3   Tony Lindgren
• [PATCH 07/23] ARM: plat-omap: remove arch specific special handling for ioremap   Nicolas Pitre
• [PATCH 07/23] ARM: plat-omap: remove arch specific special handling for ioremap   Russell King - ARM Linux
• realview compulsory enables CONFIG_ARM_PATCH_PHYS_VIRT on me   Nicolas Pitre
• realview compulsory enables CONFIG_ARM_PATCH_PHYS_VIRT on me   Russell King - ARM Linux
• [PATCH resend3] arm: s3c24xx: Add new LCD (W35i) support for Mini2440 board   Denis Kuzmenko
• [PATCH v3 3/5] clk: introduce the common clock framework   Paul Walmsley
• [PATCH resend2] s3c24xx: cpufreq: Fix compilation error when CONFIG_CPU_FREQ_S3C24XX_DEBUGFS selected.   Denis Kuzmenko
• [GIT PULL] imx: fix add_irq_domain   Shawn Guo
• [RFC PATCH 2/3] pinctrl: imx: add pinmux-imx53 support   Dong Aisheng-B29396
• [PATCH v2 1/4] mfd: mc13xxx: add device tree probe support   Shawn Guo
• [RFC PATCH 2/3] pinctrl: imx: add pinmux-imx53 support   Dong Aisheng
• [RFC PATCH 1/3] pinctrl: imx: add pinmux imx core driver   Dong Aisheng-B29396
• [RFC PATCH 2/3] pinctrl: imx: add pinmux-imx53 support   Dong Aisheng-B29396
• [PATCH 07/23] ARM: plat-omap: remove arch specific special handling for ioremap   Nicolas Pitre
• [RFC PATCH 0/8] Add common ARM cpuidle init code   Robert Lee
• [RFC PATCH 1/8] ARM: Add commonly used cpuidle init code   Robert Lee
• [RFC PATCH 2/8] ARM: at91: Replace init with new common ARM cpuidle init code   Robert Lee
• [RFC PATCH 3/8] ARM: kirkwood: Replace init with new common ARM cpuidle init code   Robert Lee
• [RFC PATCH 4/8] ARM: exynos: Replace init with new common ARM cpuidle init code   Robert Lee
• [RFC PATCH 5/8] ARM: davinci: Replace init with new common ARM cpuidle init code   Robert Lee
• [RFC PATCH 6/8] ARM: shmobile: Replace init with new common ARM cpuidle init code   Robert Lee
• [RFC PATCH 7/8] ARM: imx: Add mx5 clock changes necessary for low power   Robert Lee
• [RFC PATCH 8/8] ARM: imx: Add mx5 cpuidle implmentation   Robert Lee
• [PATCH 07/23] ARM: plat-omap: remove arch specific special handling for ioremap   Tony Lindgren
• [RFC PATCH 2/3] pinctrl: imx: add pinmux-imx53 support   Dong Aisheng-B29396
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH 2/3] pinctrl: imx: add pinmux-imx53 support   Shawn Guo
• [PATCH v3 3/5] clk: introduce the common clock framework   Paul Walmsley
• [PATCH v2 0/3] Support Samsung Exynos OHCI device and driver   Jingoo Han
• [RFC PATCH v1 5/7] media: v4l2: introduce two IOCTLs for face detection   Ming Lei
• [PATCH v2 1/3] ARM: EXYNOS: Add USB OHCI device   Jingoo Han
• [PATCH v2 2/3] ARM: EXYNOS: Add USB OHCI support to SMDKV310 board   Jingoo Han
• [PATCH v2 3/3] USB: Add Samsung Exynos OHCI diver   Jingoo Han
• [PATCH v3 1/3] ARM: at91/aic: add irq domain and device tree support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v5 1/4] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [RFC PATCH 2/3] pinctrl: imx: add pinmux-imx53 support   Shawn Guo
• [RFC PATCH 1/3] pinctrl: imx: add pinmux imx core driver   Shawn Guo
• [RFC][PATCH] ARM: kirkwood: Remove eSATA SheevaPlug board support   Tixy
• [RFC PATCH 1/3] pinctrl: imx: add pinmux imx core driver   Dong Aisheng-B29396
• [RFC PATCH 2/3] pinctrl: imx: add pinmux-imx53 support   Dong Aisheng-B29396
• [RFC PATCH 3/3] pinctrl: imx: add pinmux-imx6q support   Shawn Guo
• [RFC PATCH 3/3] pinctrl: imx: add pinmux-imx6q support   Dong Aisheng-B29396
• [RFC PATCH 1/3] pinctrl: imx: add pinmux imx core driver   Shawn Guo
• [RFC PATCH 2/3] pinctrl: imx: add pinmux-imx53 support   Lothar Waßmann
• [RFC PATCH 1/3] pinctrl: imx: add pinmux imx core driver   Dong Aisheng-B29396
• [RFC PATCH 1/3] pinctrl: imx: add pinmux imx core driver   Shawn Guo
• [RFC PATCH 2/3] pinctrl: imx: add pinmux-imx53 support   Shawn Guo
• [RFC PATCH 2/3] pinctrl: imx: add pinmux-imx53 support   Uwe Kleine-König
• realview compulsory enables CONFIG_ARM_PATCH_PHYS_VIRT on me   Colin Tuckley
• Error of 'handle_local_timer' missing in plat-mxc/gic.c when building 'mx5-merge' branch   Eric Miao
• [PATCH 07/23] ARM: plat-omap: remove arch specific special handling for ioremap   Russell King - ARM Linux
• Error of 'handle_local_timer' missing in plat-mxc/gic.c when building 'mx5-merge' branch   Shawn Guo
• Error of 'handle_local_timer' missing in plat-mxc/gic.c when building 'mx5-merge' branch   Eric Miao
• [PATCH v2 1/3] ARM: EXYNOS: Add USB OHCI device   Tushar Behera
• Error of 'handle_local_timer' missing in plat-mxc/gic.c when building 'mx5-merge' branch   Shawn Guo
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Dave Martin
• [PATCH v2 1/3] ARM: EXYNOS: Add USB OHCI device   Jingoo Han
• Error of 'handle_local_timer' missing in plat-mxc/gic.c when building 'mx5-merge' branch   Shawn Guo
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Dave Martin
• [RFC PATCH 1/3] pinctrl: imx: add pinmux imx core driver   Dong Aisheng-B29396
• [RFC PATCH 1/3] pinctrl: imx: add pinmux imx core driver   Shawn Guo
• [PATCH 2/2] [media] V4L: atmel-isi: add clk_prepare()/clk_unprepare() functions   Guennadi Liakhovetski
• Patch 7193/1: Fix machine_is_xxx() naming for eSata SheevaPlug and QNAP TS-209   Tixy
• [PATCH v2 1/4] mfd: mc13xxx: add device tree probe support   Mark Brown
• [GIT PULL] Identity mapping changes for 3.3   Will Deacon
• [PATCH 1/3] PM: Provide an always on power domain governor   Kukjin Kim
• [PATCH] iommu/msm: Fix compile error in mach-msm/devices-iommu.c   Joerg Roedel
• [PATCH][NET] several cleanups and bugfixes for fec.c   Lothar Waßmann
• [PATCH][NET] several cleanups and bugfixes for fec.c: misc cleanups   Lothar Waßmann
• [PATCH][NET] several cleanups and bugfixes for fec.c: set con_id in clk_get() call to NULL   Lothar Waßmann
• [PATCH][NET] several cleanups and bugfixes for fec.c: prevent dobule restart of interface on FDX/HDX change   Lothar Waßmann
• [PATCH][NET] several cleanups and bugfixes for fec.c: don't request invalid IRQ   Lothar Waßmann
• [PATCH][NET] several cleanups and bugfixes for fec.c: don't munge MAC address from platform data   Lothar Waßmann
• [PATCH][NET] several cleanups and bugfixes for fec.c: preserve MII/RMII setting in fec_stop()   Lothar Waßmann
• [PATCH][NET] several cleanups and bugfixes for fec.c: fix the .remove code   Lothar Waßmann
• [PATCH][NET] several cleanups and bugfixes for fec.c: make FEC driver buildable as module   Lothar Waßmann
• [PATCH] ARM: S3C64XX: Hook up VDDINT on Cragganmore   Mark Brown
• realview compulsory enables CONFIG_ARM_PATCH_PHYS_VIRT on me   Linus Walleij
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Alan Cox
• [GIT PULL] Identity mapping changes for 3.3   Russell King - ARM Linux
• [RFC PATCH 0/3] Use Generic USB PHY Layer at i.MX Platform   Peter Chen
• [RFC PATCH 1/3] USB: Add Generic USB PHY Layer code   Peter Chen
• [RFC PATCH 2/3] USB: ehci-mxc: Use new phy structure code for mxc host use   Peter Chen
• [RFC PATCH 3/3] ARM: mx51: Create two usb phy platform drivers   Peter Chen
• [PATCH V2 0/6] SPI platform device consolidation   Kukjin Kim
• [PATCH] ARM: davinci: dm368 evm: add support for CPLD version specific cpu_is_* macro   Manjunathappa, Prakash
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Russell King - ARM Linux
• [RFC PATCH 2/3] pinctrl: imx: add pinmux-imx53 support   Sascha Hauer
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Russell King - ARM Linux
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Geert Uytterhoeven
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Russell King - ARM Linux
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Alan Cox
• [PATCH] USB: pxa168: Fix compilation error   Tanmay Upadhyay
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Alan Cox
• [PATCH] ARM: make head.S register assignments more convenient   Dave Martin
• [PATCH] USB: pxa168: Fix compilation error   Sergei Shtylyov
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Russell King - ARM Linux
• [PATCH] ARM: make head.S register assignments more convenient   Russell King - ARM Linux
• [PATCH resend2] s3c24xx: cpufreq: Fix compilation error when CONFIG_CPU_FREQ_S3C24XX_DEBUGFS selected.   Kukjin Kim
• [PATCH] ARM: S3C64XX: Add basic cpuidle driver   Heiko Stübner
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Alan Cox
• [PATCH resend3] arm: s3c24xx: Add new LCD (W35i) support for Mini2440 board   Kukjin Kim
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Dave Martin
• [PATCH] ARM: davinci: dm368 evm: add support for CPLD version specific cpu_is_* macro   Sergei Shtylyov
• [RFC PATCH 1/8] ARM: Add commonly used cpuidle init code   Mark Brown
• [PATCH v7 2/2] iommu/exynos: Add iommu driver for Exynos Platforms   Marek Szyprowski
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Russell King - ARM Linux
• [PATCH v7 1/2] ARM: EXYNOS: Change System MMU platform device definitions   Marek Szyprowski
• [PATCH 1/3] PM: Provide an always on power domain governor   Marek Szyprowski
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Alan Cox
• [PATCH v7 0/2] iommu/exynos: Add IOMMU/System MMU driver for Samsung Exynos   KyongHo Cho
• [PATCH v7 2/2] iommu/exynos: Add iommu driver for Exynos Platforms   KyongHo Cho
• [BUGFIX] video/mxsfb: fix crash when unblanking the display   Lothar Waßmann
• [GIT PULL] Linux support for ARM LPAE   Russell King - ARM Linux
• [PATCH v7 0/2] iommu/exynos: Add IOMMU/System MMU driver for Samsung Exynos   Kyungmin Park
• [RFC PATCH v1 5/7] media: v4l2: introduce two IOCTLs for face detection   Arnd Bergmann
• [PATCH v7 0/2] iommu/exynos: Add IOMMU/System MMU driver for Samsung Exynos   Joerg Roedel
• [RFC PATCH v1 5/7] media: v4l2: introduce two IOCTLs for face detection   Ming Lei
• [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Arnd Bergmann
• [PATCH] ARM: make head.S register assignments more convenient   Dave Martin
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Dave Martin
• [MXS MMC 0/5] Some cleanups and fixes for the MXS MMC subsystem   Lothar Waßmann
• [PATCH][NET] several cleanups and bugfixes for fec.c: don't munge MAC address from platform data   Lothar Waßmann
• [RFC PATCH v1 6/7] media: video: introduce face detection driver module   Ming Lei
• [GIT PULL] Linux support for ARM LPAE   Catalin Marinas
• [GIT PULL] Identity mapping changes for 3.3   Will Deacon
• [GIT PULL] at91 fixes for 3.2-rc4   Arnd Bergmann
• [GIT PULL] imx: fix add_irq_domain   Arnd Bergmann
• [GIT PULL] ARM: CSR: fix building errors for 3.2-rc   Arnd Bergmann
• [GIT PULL] mxs: fixes (round 2)   Arnd Bergmann
• [GIT PULL] DaVinci fixes for v3.2-rc   Arnd Bergmann
• [GIT PULL] mxs: saif recording support   Arnd Bergmann
• [PATCH v7 2/2] iommu/exynos: Add iommu driver for Exynos Platforms   Marek Szyprowski
• [PATCH 1/3] PM: Provide an always on power domain governor   Mark Brown
• [RFC PATCH v1 5/7] media: v4l2: introduce two IOCTLs for face detection   Arnd Bergmann
• [RFC PATCH 3/3] pinctrl: imx: add pinmux-imx6q support   Shawn Guo
• [RFC PATCH v1 5/7] media: v4l2: introduce two IOCTLs for face detection   Ming Lei
• [PATCH v3] mfd: mc13xxx: add device tree probe support   Shawn Guo
• [GIT PULL] mxs: saif recording support   Shawn Guo
• [RFC PATCH 1/8] ARM: Add commonly used cpuidle init code   Rob Herring
• [RFC PATCH] ARM: Add generic instruction opcode manipulation helpers   Will Deacon
• [RFC PATCH] ARM: Add generic instruction opcode manipulation helpers   Dave Martin
• [PATCH][NET] several cleanups and bugfixes for fec.c: prevent dobule restart of interface on FDX/HDX change   Ben Hutchings
• [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Daniel Vetter
• [GIT PULL v2] Linux support for ARM LPAE   Catalin Marinas
• [PATCH v4 0/6] Versatile Express DT support   Pawel Moll
• [PATCH v4 1/6] ARM: versatile: Add missing ENDPROC to headsmp.S   Pawel Moll
• [PATCH v4 2/6] ARM: vexpress: Get rid of MMIO_P2V   Pawel Moll
• [PATCH v4 3/6] ARM: vexpress: Add DT support for the motherboard   Pawel Moll
• [PATCH v4 4/6] ARM: vexpress: Motherboard RS1 memory map support   Pawel Moll
• [PATCH v4 5/6] ARM: vexpress: DT-based support for Cortex-A5 and Cortex-A9 based tiles   Pawel Moll
• [PATCH v4 6/6] ARM: vexpress: DT-based support for Cortex-A7 and Cortex-A15 based tiles   Pawel Moll
• [RFC PATCH v1 5/7] media: v4l2: introduce two IOCTLs for face detection   Ming Lei
• [PATCH] ARM: Add Cortex A7 proc info   Pawel Moll
• [GIT PULL] ARM: amba: Enable module alias autogeneration for AMBA drivers   Alessandro Rubini
• [GIT PULL] ARM: amba: Enable module alias autogeneration for AMBA drivers   Dave Martin
• [RFC PATCH] ARM: Add generic instruction opcode manipulation helpers   Jon Medhurst (Tixy)
• [PATCH v7 0/2] iommu/exynos: Add IOMMU/System MMU driver for Samsung Exynos   Joerg Roedel
• [PATCH] ARM: pl2x0/pl310: Refactor Kconfig to be more maintainable   Dave Martin
• [PATCH v2] ARM: pl2x0/pl310: Refactor Kconfig to be more maintainable   Dave Martin
• [PATCH 1/3] ARM: OMAP2+: kconfig: Enable devicetree by default for OMAP2+ systems   Benoit Cousson
• [PATCH 2/3] arm/dts: OMAP: Remove bootargs node from board files   Benoit Cousson
• [PATCH 3/3] ARM: OMAP2+: board-generic: Replace #if defined by #ifdef for consistency   Benoit Cousson
• [PATCH] ARM: pl2x0/pl310: Refactor Kconfig to be more maintainable   Rob Herring
• [GIT PULL] ARM perf updates for 3.3   Tony Lindgren
• [PATCH] ARM: pl2x0/pl310: Refactor Kconfig to be more maintainable   Dave Martin
• [PATCH 2/3] arm/dts: OMAP: Remove bootargs node from board files   Rob Herring
• [PATCH][NET] several cleanups and bugfixes for fec.c   David Miller
• [PATCH] highmem: Fix ARM build break due to __kmap_atomic rename   Stephen Warren
• [PATCH 0/4] [orion] move *_mbus_dram_info out of platform_data   Michael Walle
• [PATCH] ARM: futex: fix clobbering oldval   Jon Masters
• [PATCH] ARM: make head.S register assignments more convenient   Nicolas Pitre
• [MXS MMC 1/5] Fix grammatical error in comment   Wolfram Sang
• [PATCH] arm, da8xx, mmc: set second MMC controllers default queue   Nori, Sekhar
• [MXS MMC 3/5] Add support for SSP/MMC ports 2 & 3   Wolfram Sang
• [PATCH] ARM: futex: fix clobbering oldval   Will Deacon
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Nicolas Pitre
• [MXS MMC 4/5] Check the return codes of clk_enable() and mxs_reset_block()   Wolfram Sang
• [MXS MMC 5/5] Add an appropriate MODULE_ALIAS   Wolfram Sang
• [PATCH] arm, da8xx, mmc: set second MMC controllers default queue   Hernandez, Alejandro
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Linus Torvalds
• [PATCH] ARM: futex: fix clobbering oldval   Jon Masters
• [PATCH] highmem: Fix ARM build break due to __kmap_atomic rename   Nicolas Pitre
• [RFC][PATCH] ARM: kirkwood: Remove eSATA SheevaPlug board support   Nicolas Pitre
• [PATCH] highmem: Fix ARM build break due to __kmap_atomic rename   Stephen Warren
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Rob Herring
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Russell King - ARM Linux
• [RFC][PATCH] ARM: kirkwood: Remove eSATA SheevaPlug board support   Tixy
• [GIT PULL v2] Linux support for ARM LPAE   Russell King - ARM Linux
• [GIT PULL v2] Linux support for ARM LPAE   Russell King - ARM Linux
• [RFC PATCH v1 5/7] media: v4l2: introduce two IOCTLs for face detection   Arnd Bergmann
• [PATCH] ata: Don't use NO_IRQ in pata_of_platform driver   Uwe Kleine-König
• Advertising on your site   Frank Dewitt
• [PATCH] ARM: futex: fix clobbering oldval   Will Deacon
• [RFC][PATCH] ARM: kirkwood: Remove eSATA SheevaPlug board support   Russell King - ARM Linux
• [PATCH 1/3] PM: Provide an always on power domain governor   Rafael J. Wysocki
• [RFC PATCH v1 6/7] media: video: introduce face detection driver module   Sylwester Nawrocki
• [PATCH 0/7] Introducing a generic AMP framework   Saravana Kannan
• [GIT PULL v2] Linux support for ARM LPAE   Catalin Marinas
• [GIT PULL v2] Linux support for ARM LPAE   Catalin Marinas
• [RFC PATCH v1 6/7] media: video: introduce face detection driver module   Sylwester Nawrocki
• [PATCH v4 2/6] ARM: vexpress: Get rid of MMIO_P2V   Arnd Bergmann
• [PATCH v4 3/6] ARM: vexpress: Add DT support for the motherboard   Arnd Bergmann
• [PATCH v4 4/6] ARM: vexpress: Motherboard RS1 memory map support   Arnd Bergmann
• [PATCH v4 1/6] ARM: versatile: Add missing ENDPROC to headsmp.S   Arnd Bergmann
• [PATCH v4 5/6] ARM: vexpress: DT-based support for Cortex-A5 and Cortex-A9 based tiles   Arnd Bergmann
• [PATCH v4 5/6] ARM: vexpress: DT-based support for Cortex-A5 and Cortex-A9 based tiles   Arnd Bergmann
• [GIT PULL v2] Linux support for ARM LPAE   Russell King - ARM Linux
• [PATCH resend2] s3c24xx: cpufreq: Fix compilation error when CONFIG_CPU_FREQ_S3C24XX_DEBUGFS selected.   Denis Kuzmenko
• [PATCH] ARM: Add Cortex A7 proc info   Will Deacon
• [GIT PULL] Linux support for ARM LPAE   Russell King - ARM Linux
• [PATCH v2] s3c24xx: cpufreq: Fix compilation error when CONFIG_CPU_FREQ_S3C24XX_DEBUGFS selected.   Denis Kuzmenko
• [RFC PATCH 11/11] arm:omap:am33xx: Add am335x support in generic omap_hwmod   Kevin Hilman
• [PATCH v8 00/20] OMAP2+: UART: Runtime adaptation + cleanup   Kevin Hilman
• [PATCH-V5 0/3] Introducing TI's New SoC/board AM335XEVM   Kevin Hilman
• [PATCH v8 00/20] OMAP2+: UART: Runtime adaptation + cleanup   Alan Cox
• [PATCH] ARM: pcontrol_g20_defconfig should not specify toolchain path   Paul Gortmaker
• [PATCH] ARM: pcontrol_g20_defconfig should not specify toolchain path   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: pcontrol_g20_defconfig should not specify toolchain path   Paul Gortmaker
• [GIT PULL] Identity mapping changes for 3.3   Nicolas Pitre
• [RFC PATCH] ARM: Add generic instruction opcode manipulation helpers   Bi Junxiao
• [PATCH v2] ARM: OMAP: dmtimer: fix missing content/correction in low-power mode support   Tarun Kanti DebBarma
• [PATCH v2 1/2] [media] V4L: atmel-isi: add code to enable/disable ISI_MCK clock   Josh Wu
• [PATCH v2 2/2] [media] V4L: atmel-isi: add clk_prepare()/clk_unprepare() functions   Josh Wu
• Bug#651215: Kernel fails to boot on NSLU2   Ben Hutchings
• [PATCH 2/2] [media] V4L: atmel-isi: add clk_prepare()/clk_unprepare() functions   Wu, Josh
• [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Semwal, Sumit
• [PATCH] ARM: SAMSUNG: Use kmemdup rather than duplicating its implementation   Kukjin Kim
• [PATCH] arm/imx6q: Rename Sabreauto to Armadillo2   Dirk Behme
• [PATCH v2] ARM: pl330: Fix a race condition   Kukjin Kim
• [PATCH v7 2/2] iommu/exynos: Add iommu driver for Exynos Platforms   KyongHo Cho
• [PATCH][NET] several cleanups and bugfixes for fec.c: misc cleanups   Shawn Guo
• [PATCH][NET] several cleanups and bugfixes for fec.c: set con_id in clk_get() call to NULL   Shawn Guo
• [PATCH][NET] several cleanups and bugfixes for fec.c: don't request invalid IRQ   Shawn Guo
• [PATCH] ARM: EXYNOS: Fix build error without CONFIG_LOCAL_TIMERS   Kukjin Kim
• [PATCH 1/5] ASoC: omap-dmic: Add device tree bindings   Peter Ujfalusi
• [GIT PULL] Samsung fixes for v3.2   Kukjin Kim
• [PATCH][NET] several cleanups and bugfixes for fec.c: don't munge MAC address from platform data   Lothar Waßmann
• [PATCH][NET] several cleanups and bugfixes for fec.c: don't munge MAC address from platform data   Lothar Waßmann
• [GIT PULL] Samsung fixes-2 for v3.2   Kukjin Kim
• [PATCH][NET] several cleanups and bugfixes for fec.c: don't munge MAC address from platform data   Shawn Guo
• [PATCH 1/2] [media] V4L: atmel-isi: add code to enable/disable ISI_MCK clock   Russell King - ARM Linux
• [PATCH 1/3] PWM: add pwm framework support   Thierry Reding
• [PATCH][NET] several cleanups and bugfixes for fec.c: don't munge MAC address from platform data   Shawn Guo
• [RFC PATCH 2/3] pinctrl: imx: add pinmux-imx53 support   Linus Walleij
• [PATCH 1/3] PWM: add pwm framework support   Sascha Hauer
• [RFC PATCH 3/3] pinctrl: imx: add pinmux-imx6q support   Linus Walleij
• [PATCH][NET] several cleanups and bugfixes for fec.c: don't munge MAC address from platform data   Shawn Guo
• [RFC PATCH 3/3] pinctrl: imx: add pinmux-imx6q support   Dong Aisheng-B29396
• [PATCH] highmem: fix missed kmap_atomic update in arch/arm/include/asm/highmem.h   Axel Lin
• [PATCH] highmem: Fix ARM build break due to __kmap_atomic rename   Cong Wang
• [PATCH] highmem: fix missed kmap_atomic update in arch/arm/include/asm/highmem.h   Uwe Kleine-König
• [PATCH] highmem: fix missed kmap_atomic update in arch/arm/include/asm/highmem.h   Cong Wang
• [PATCH][NET] several cleanups and bugfixes for fec.c: preserve MII/RMII setting in fec_stop()   Shawn Guo
• [PATCH v2] ARM: pl330: Fix a race condition   Javi Merino
• [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Arnd Bergmann
• [PATCH 1/2] [media] V4L: atmel-isi: add code to enable/disableISI_MCK clock   Wu, Josh
• [GIT PULL] Samsung fixes-2 for v3.2   Arnd Bergmann
• [PATCH] ARM: pcontrol_g20_defconfig should not specify toolchain path   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH] ARM: Add generic instruction opcode manipulation helpers   Dave Martin
• [PATCH][NET] several cleanups and bugfixes for fec.c: preserve MII/RMII setting in fec_stop()   Lothar Waßmann
• [PATCH] arm,davinci: configure davinci aemif chipselects through OF   Nori, Sekhar
• [PATCH][NET] several cleanups and bugfixes for fec.c: preserve MII/RMII setting in fec_stop()   Lothar Waßmann
• [PATCH][NET] several cleanups and bugfixes for fec.c: preserve MII/RMII setting in fec_stop()   Shawn Guo
• [GIT PULL v2] Linux support for ARM LPAE   Catalin Marinas
• [MXS MMC 1/5] Fix grammatical error in comment   Shawn Guo
• [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Semwal, Sumit
• [PATCH][NET] several cleanups and bugfixes for fec.c: preserve MII/RMII setting in fec_stop()   Shawn Guo
• [GIT PULL] Linux support for ARM LPAE   Catalin Marinas
• [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Arnd Bergmann
• [PATCH] ARM: make head.S register assignments more convenient   Dave Martin
• [MXS MMC 2/5] Some cleanups for the MMC driver   Lothar Waßmann
• [MXS MMC 2/5] Some cleanups for the MMC driver   Shawn Guo
• [PATCH 00/14] mmc: mmci: Improved PM support, cleanup and bugfixes   Linus Walleij
• [PATCH] ARM: exynos4: Fix for stall in case of cpu hotplug or sleep   Kukjin Kim
• [MXS MMC 2/5] Some cleanups for the MMC driver   Shawn Guo
• [GIT PULL] Linux support for ARM LPAE   Catalin Marinas
• [MXS MMC 3/5] Add support for SSP/MMC ports 2 & 3   Shawn Guo
• [MXS MMC 4/5] Check the return codes of clk_enable() and mxs_reset_block()   Shawn Guo
• [MXS MMC 5/5] Add an appropriate MODULE_ALIAS   Shawn Guo
• [PATCH 1/3] PM: Provide an always on power domain governor   Mark Brown
• [MXS MMC 2/5] Some cleanups for the MMC driver   Uwe Kleine-König
• [PATCH] arm/imx6q: Rename Sabreauto to Armadillo2   Shawn Guo
• [PATCH][NET] several cleanups and bugfixes for fec.c: fix the .remove code   Lothar Waßmann
• [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Semwal, Sumit
• [PATCH][NET] several cleanups and bugfixes for fec.c: fix the .remove code   Shawn Guo
• [PATCH][NET] several cleanups and bugfixes for fec.c: preserve MII/RMII setting in fec_stop()   Shawn Guo
• [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Arnd Bergmann
• [RFC PATCH v1 6/7] media: video: introduce face detection driver module   Ming Lei
• [PATCH][NET] several cleanups and bugfixes for fec.c: fix the .remove code   Shawn Guo
• [PATCH v3 1/2] net/macb: add DT support for Cadence macb/gem driver   Nicolas Ferre
• [PATCH 0/4] arm: exynos4: add irq domain and device tree support for wakeup interrupts   Thomas Abraham
• [PATCH 1/4] arm: exynos4: simplify EINT number to linux irq number translation   Thomas Abraham
• [PATCH 2/4] arm: exynos4: add irq_domain support for wakeup interrupts   Thomas Abraham
• [PATCH 3/4] arm: exynos4: remove arch_initcall for wakeup interrupt source initialization   Thomas Abraham
• [PATCH 4/4] arm: exynos4: add device tree support for external wakeup interrupt controller   Thomas Abraham
• [GIT PULL] ARM perf updates for 3.3   Cousson, Benoit
• [PATCH] arm/orion: use set_bit and clear_bit in gpio implementation   Holger Brunck
• [PATCH] arm/orion: use set_bit and clear_bit in gpio implementation   Lennert Buytenhek
• [PATCH] ARM: imx6q: generate imx6q dtb files   Eric Miao
• subarch maintainers: please send 3.3 pull requests for arm-soc   Arnd Bergmann
• [PATCH v4 5/6] ARM: vexpress: DT-based support for Cortex-A5 and Cortex-A9 based tiles   Dave Martin
• [GIT PULL] ARM perf updates for 3.3   Marc Zyngier
• [PATCH] ARM: highbank: add xgmac ethernet devices to dts   Rob Herring
• subarch maintainers: please send 3.3 pull requests for arm-soc   Linus Walleij
• [PATCH v4 5/6] ARM: vexpress: DT-based support for Cortex-A5 and Cortex-A9 based tiles   Dave Martin
• [PATCH] arm/orion: use set_bit and clear_bit in gpio implementation   Nicolas Pitre
• [PATCH] arm/orion: use set_bit and clear_bit in gpio implementation   Holger Brunck
• [PATCH 4/4] arm: exynos4: add device tree support for external wakeup interrupt controller   Rob Herring
• [PATCH 2/4] arm: exynos4: add irq_domain support for wakeup interrupts   Rob Herring
• [PATCH 4/4] arm: exynos4: add device tree support for external wakeup interrupt controller   Thomas Abraham
• [PATCH] iommu/msm: Fix compile error in mach-msm/devices-iommu.c   David Brown
• [PATCH 2/4] arm: exynos4: add irq_domain support for wakeup interrupts   Thomas Abraham
• subarch maintainers: please send 3.3 pull requests for arm-soc   Arnd Bergmann
• [PATCH] ARM: Add generic instruction opcode manipulation helpers   Dave Martin
• [PATCH] ARM: Add generic instruction opcode manipulation helpers   Nicolas Pitre
• [PATCH] iommu/msm: Fix compile error in mach-msm/devices-iommu.c   Joerg Roedel
• [PATCH v3 1/2] net/macb: add DT support for Cadence macb/gem driver   David Miller
• [PATCH] net/fec: fix the use of pdev->id   David Miller
• [PATCH v2] ARM: Add Cortex-A7 proc info   Pawel Moll
• [PATCH 0/7] Introducing a generic AMP framework   Ohad Ben-Cohen
• [PATCH v4 5/6] ARM: vexpress: DT-based support for Cortex-A5 and Cortex-A9 based tiles   Pawel Moll
• [PATCH v4 5/6] ARM: vexpress: DT-based support for Cortex-A5 and Cortex-A9 based tiles   Pawel Moll
• [PATCH v4 5/6] ARM: vexpress: DT-based support for Cortex-A5 and Cortex-A9 based tiles   Pawel Moll
• [GIT PULL] More omap1 boot regression fixes for v3.2-rc4   Tony Lindgren
• [PATCH V3] arm: kirkwood: add dreamplug support.   Jason Cooper
• [GIT PULL] ARM perf updates for 3.3   Tony Lindgren
• [GIT PULL] Identity mapping changes for 3.3   Russell King - ARM Linux
• [PATCH] omap: rx51: initialize isp1704 properly   Felipe Contreras
• [PATCH] USB: pxa168: Fix compilation error   Alan Stern
• [GIT PULL v2] Linux support for ARM LPAE   Russell King - ARM Linux
• [GIT PULL] Linux support for ARM LPAE   Russell King - ARM Linux
• [PATCH 4/7] spi/pl022: move device disable to workqueue thread   Wolfram Sang
• [GIT PULL] Linux support for ARM LPAE   Russell King - ARM Linux
• [PATCH v3] pxa2xx_spi: fix memory corruption   Wolfram Sang
• [GIT PULL] Identity mapping changes for 3.3   Nicolas Pitre
• [PATCH] pinctrl: make the "Debug PINCTRL calls" entry actually do something   Uwe Kleine-König
• [PATCH 0/4] ARM: OMAP2+: Interrupt controllers adaptation to DT   Benoit Cousson
• [PATCH 1/4] arm/dts: OMAP4: Update DTS file with new GIC bindings   Benoit Cousson
• [PATCH 2/4] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller   Benoit Cousson
• [PATCH 3/4] arm/dts: OMAP3: Add interrupt-controller bindings for INTC   Benoit Cousson
• [PATCH 4/4] ARM: OMAP2+: board-generic: Use of_irq_init API   Benoit Cousson
• [PATCH v2] ARM: pl330: Fix a race condition   Javi Merino
• [PATCH-V5 1/3] arm:omap:am33xx: Update common OMAP machine specific sources   Tony Lindgren
• [PATCH-V5 0/3] Introducing TI's New SoC/board AM335XEVM   Tony Lindgren
• [PATCH 2/4] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller   Rob Herring
• [RFC PATCH 00/11] arm:omap:am33xx: Add basic voltage, power, clock & HWMOD data   Tony Lindgren
• [PATCH 1/3] PM: Provide an always on power domain governor   Rafael J. Wysocki
• [PATCH] fault_inject: Don't select frame pointer with ARM unwind   Laura Abbott
• [PATCH 3/3] ARM: S3C64XX: Implement basic power domain support   Rafael J. Wysocki
• Bug#651215: Kernel fails to boot on NSLU2   Arnaud Patard (Rtp)
• [GIT PULL] Linux support for ARM LPAE   Catalin Marinas
• [GIT PULL] Identity mapping changes for 3.3   Russell King - ARM Linux
• [PATCH] pinctrl: remove two unused global variables   Uwe Kleine-König
• [GIT PULL] Linux support for ARM LPAE   Russell King - ARM Linux
• [PATCH v2] spi: QUP based bus driver for Qualcomm MSM chipsets   Wolfram Sang
• [PATCH 4/7] spi/pl022: move device disable to workqueue thread   Linus Walleij
• [PATCH 1/2] [media] V4L: atmel-isi: add code to enable/disableISI_MCK clock   Russell King - ARM Linux
• [PATCH 1/2] ARM: only look for TCM on ARM926 and later   Linus Walleij
• [PATCH 2/2] ARM: activate TCM on the Integrator   Linus Walleij
• [PATCH v4 3/6] ARM: vexpress: Add DT support for the motherboard   Arnd Bergmann
• [PATCH v4 5/6] ARM: vexpress: DT-based support for Cortex-A5 and Cortex-A9 based tiles   Arnd Bergmann
• Bug#651215: Kernel fails to boot on NSLU2   Russell King - ARM Linux
• [PATCH] arm: omap: rx51: enable tsc2005 touchscreen   Tony Lindgren
• [PATCH v4 1/3] ARM: OMAP: TI81XX: Prepare for addition of TI814X support   Tony Lindgren
• [PATCH V2 0/1] dmaengine/amba-pl08x: Add support for s3c64xx DMAC   Linus Walleij
• [GIT PULL] Identity mapping changes for 3.3   Nicolas Pitre
• Bug#651215: Kernel fails to boot on NSLU2   Nicolas Pitre
• [GIT PULL] Linux support for ARM LPAE   Russell King - ARM Linux
• [PATCH 1/5] arm/dt: tegra: Remove /memreserve/ from device-tree files   Olof Johansson
• [PATCH 2/5] arm/dt: tegra: Remove /chosen node   Olof Johansson
• [PATCH 3/5] arm/dt: tegra: Fix I2C nodes to match board files   Olof Johansson
• [PATCH 4/5] arm/dt: tegra: Fix serial nodes to match board files   Olof Johansson
• [PATCH 5/5] arm/dt: tegra: Fix SDHCI nodes to match board files   Olof Johansson
• [PATCH 1/5] arm/dt: tegra: Remove /memreserve/ from device-tree files   Olof Johansson
• [PATCH] ARM: OMAP: dmtimer: fix missing content/correction in low-power mode support   Felipe Contreras
• [PATCH 1/3] PM: Provide an always on power domain governor   Mark Brown
• [PATCH 1/3] ARM: EXYNOS: Support DMA driver for Exynos4x12 series   Boojin Kim
• [PATCH V2 0/1] dmaengine/amba-pl08x: Add support for s3c64xx DMAC   Alim Akhtar
• [PATCH v2] ARM: S3C64XX: Implement basic power domain support   Mark Brown
• [PATCH 3/3] ARM: S3C64XX: Implement basic power domain support   Mark Brown
• DMA: PL330: Merge PL330 drivers   Boojin Kim
• [PATCH 2/3] DMA: PL330: Merge PL330 drivers   Boojin Kim
• [PATCH 3/3] DMA: PL330: Remove an unused function   Boojin Kim
• ARM: mx51/53: fix _clk_max_* misuse and add esdhc round_rate   Richard Zhao
• [PATCH V2 1/2] ARM: mx51/53: correct misuse of _clk_max_enable and _clk_max_disable   Richard Zhao
• [PATCH V2 2/2] ARM: mx51/53: add round_rate for esdhc clocks   Richard Zhao
• [PATCH] ARM: delete the pcontrol_g20_defconfig   Paul Gortmaker
• [PATCH] ARM: S3C64XX: Hook up VDDINT on Cragganmore   Kukjin Kim
• [PATCH v2] pcmcia: pxa: replace IRQ_GPIO() with gpio_to_irq()   Haojian Zhuang
• [PATCH] ARM: S3C64XX: Gate some more clocks by default   Kukjin Kim
• [V3 0/6] rtc-sa1100 clean up   Haojian Zhuang
• [PATCH 1/2] [media] V4L: atmel-isi: add code toenable/disableISI_MCK clock   Wu, Josh
• [RFC PATCH v1 5/7] media: v4l2: introduce two IOCTLs for face detection   Ming Lei
• [PATCH v2] USB: pxa168: Fix compilation error   Tanmay Upadhyay
• [PATCH] AT91: Update struct atmel_nand_data to support PMECC   Hong Xu
• [PATCH] spi/pxa2xx: fix null_dma_buf out of allocated memory.   Yu Xu
• [PATCH V3] arm/tegra: convert tegra20 to GIC devicetree binding   Olof Johansson
• [PATCH] arm/tegra: Remove code that's ifndef CONFIG_ARM_GIC   Olof Johansson
• [GIT PULL] More omap1 boot regression fixes for v3.2-rc4   Olof Johansson
• [PATCH 1/2] MTD: atmel_nand: Update Kconfig to support PMECC   Hong Xu
• [PATCH 2/2] MTD: atmel_nand: Update driver code to support Programmable HW ECC controller   Hong Xu
• [PATCH 1/2] ARM: pxa: fix build error for GPIO_bit()   Haojian Zhuang
• [PATCH 2/2] ARM: pxa: fix the build error because of missing gpio-pxa.h   Haojian Zhuang
• [GIT PULL] sa1100 fixes for 3.2   Haojian Zhuang
• [PATCH] ARM: imx6q: generate imx6q dtb files   Shawn Guo
• [PATCH v2] arm/imx6q: Rename Sabreauto to Armadillo2   Dirk Behme
• [GIT PULL] pxa changes for v3.3   Haojian Zhuang
• [PATCH] ARM: imx6q: generate imx6q dtb files   Dirk Behme
• [PATCH] video IPUv1 fixes for different display connections   Vinod Koul
• [PATCH] ARM: imx6q: generate imx6q dtb files   Shawn Guo
• [PATCH] arm, davinci: configure davinci aemif chipselects through OF   Heiko Schocher
• [PATCH 0/7] Introducing a generic AMP framework   Ohad Ben-Cohen
• [PATCH 4/7] amp/omap: add a remoteproc driver   Ohad Ben-Cohen
• [MXS MMC v2 0/4] Some cleanups and fixes for the MXS MMC subsystem   Lothar Waßmann
• [RESEND PATCH v3] pxa2xx_spi: fix memory corruption   Vasily Khoruzhick
• [PATCH] arm,davinci: configure davinci aemif chipselects through OF   Nori, Sekhar
• [PATCH 1/2] DMA: PL330: Merge PL330 driver into drivers/dma/   Kukjin Kim
• [PATCH 2/2] DMA: PL330: Removes useless function   Kukjin Kim
• [PATCH] ARM: EXYNOS: Support DMA for EXYNOS4X12 SoCs   Kukjin Kim
• [MXS MMC v2 0/4] Some cleanups and fixes for the MXS MMC subsystem   Wolfram Sang
• [MXS MMC v2 1/4] Fix grammatical error in comment   Wolfram Sang
• [MXS MMC v2 3/4] Check the return codes of clk_enable() and mxs_reset_block()   Wolfram Sang
• [MXS MMC 4/4] Add an appropriate MODULE_ALIAS   Wolfram Sang
• [PATCH] ARM: davinci: add missing commas on last members of structure and arrays   Shankarmurthy, Akshay
• [PATCH] arm, davinci: configure davinci aemif chipselects through OF   Heiko Schocher
• [MXS MMC v2 2/4] Some cleanups for the MMC driver   Shawn Guo
• [PATCH V2 2/2] ARM: mx51/53: add round_rate for esdhc clocks   Sascha Hauer
• [PATCH v2] irqdomain: protect macro variable in domain iterators   Nicolas Ferre
• [PATCH] video IPUv1 fixes for different display connections   Sascha Hauer
• [PATCH] video IPUv1 fixes for different display connections   Vinod Koul
• [PATCH V2 1/2] ARM: mx51/53: correct misuse of _clk_max_enable and _clk_max_disable   Sascha Hauer
• [V2][PATCH 0/6]ARM: fix BE8 mode support   Junxiao Bi
• [PATCH 1/6] ARM: fix be8 support for phys/virt address conversion   Junxiao Bi
• [PATCH 2/6] ARM: Atomic64: fix 64bit ops in BE mode   Junxiao Bi
• [PATCH 3/6] ARM: early_printk: pl01x: fix big endian support   Junxiao Bi
• [PATCH 4/6] ARM: SMP: fix big endian support   Junxiao Bi
• [PATCH 5/6] MTD: map: fix big endian support   Junxiao Bi
• [PATCH 6/6] ARM: support kernel modules in BE8 mode   Junxiao Bi
• [PATCH v3 1/2] [media] V4L: atmel-isi: add code to enable/disable ISI_MCK clock   Josh Wu
• [PATCH v3 2/2] [media] V4L: atmel-isi: add clk_prepare()/clk_unprepare() functions   Josh Wu
• [PATCH] arm,davinci: configure davinci aemif chipselects through OF   Nori, Sekhar
• [PATCH v4 3/6] ARM: vexpress: Add DT support for the motherboard   Pawel Moll
• [GIT PULL v3] Linux support for ARM LPAE   Catalin Marinas
• [PATCH v4 5/6] ARM: vexpress: DT-based support for Cortex-A5 and Cortex-A9 based tiles   Dave Martin
• [PATCH] leds: kill CONFIG_LEDS_CLASS option   Bryan Wu
• [PATCH] ARM: OMAP3LOGIC: Adding DSS support   Alex
• [GIT PULL] pxa changes for v3.3   Eric Miao
• [PATCH V2 2/2] ARM: mx51/53: add round_rate for esdhc clocks   Richard Zhao
• [PATCH V2 1/2] ARM: mx51/53: correct misuse of _clk_max_enable and _clk_max_disable   Richard Zhao
• [PATCH v6 00/10] Add support for tegra30 and cardhu   Peter De Schrijver
• [PATCH v6 00/10] Add support for tegra30 and cardhu   Peter De Schrijver
• [PATCH v6 01/10] arm/tegra: initial device tree for tegra30   Peter De Schrijver
• [PATCH v6 02/10] arm/tegra: cleanup tegra20 support   Peter De Schrijver
• [PATCH v6 03/10] arm/tegra: prepare clock code for multiple tegra variants   Peter De Schrijver
• [PATCH v6 04/10] arm/tegra: prepare early init for multiple tegra variants   Peter De Schrijver
• [PATCH v6 05/10] arm/tegra: rename tegra20 pinmux files   Peter De Schrijver
• [PATCH v6 06/10] arm/tegra: prepare pinmux code for multiple tegra variants   Peter De Schrijver
• [PATCH v6 07/10] arm/tegra: add new fields to struct tegra_pingroup_desc   Peter De Schrijver
• [PATCH v6 08/10] arm/tegra: pinmux tables and definitions for tegra30   Peter De Schrijver
• [PATCH v6 09/10] arm/tegra: implement support for tegra30   Peter De Schrijver
• [PATCH v6 10/10] arm/tegra: add support for tegra30 based board cardhu   Peter De Schrijver
• [PATCH v3 2/2] MEM2MEM: Add support for eMMa-PrP mem2mem operations.   Mauro Carvalho Chehab
• [PATCH v3 1/2] MX2: Add platform definitions for eMMa-PrP device.   Mauro Carvalho Chehab
• [PATCH] SPI: add CSR SiRFprimaII SPI controller driver   Wolfram Sang
• [PATCH] arm/imx: fix power button on imx51 babbage board   Shawn Guo
• [PATCH v2] irqdomain: protect macro variable in domain iterators   Rob Herring
• [PATCH-V5 0/3] Introducing TI's New SoC/board AM335XEVM   Hiremath, Vaibhav
• [PATCH v4 0/5] ARM: davinci: re-arrange definitions to have a common davinci header   Manjunath Hadli
• [PATCH v4 1/5] davinci: vpif: remove obsolete header file inclusion   Manjunath Hadli
• [PATCH v4 2/5] ARM: davinci: dm644x: remove the macros from the header to move to c file   Manjunath Hadli
• [PATCH v4 3/5] ARM: davinci: dm365: remove the macros from the header to move to c file   Manjunath Hadli
• [PATCH v4 4/5] ARM: davinci: dm646x: remove the macros from the header to move to c file   Manjunath Hadli
• [PATCH v4 5/5] ARM: davinci: create new common platform header for davinci   Manjunath Hadli
• [PATCH v2] ARM: Add generic instruction opcode manipulation helpers   Dave Martin
• [PATCH 2/2] gpio/tegra: Dynamically allocate IRQ base, and support DT   Shawn Guo
• [GIT PULL] imx: gpio interrupt cleanup   Shawn Guo
• [PATCH] omap: rx51: initialize isp1704 properly   Heikki Krogerus
• [PATCH 1/2] ARM: at91: make x40s use free of at91_sys_read/write   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] ARM: at91x40: refresh soc defconfig for 3.2   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] pinctrl: make the "Debug PINCTRL calls" entry actually do something   Linus Walleij
• [RFC PATCH 0/8] Add common ARM cpuidle init code   Shawn Guo
• [PATCH 2/4] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller   Cousson, Benoit
• [PATCH] leds: kill CONFIG_LEDS_CLASS option   Richard Purdie
• ARM: at91: smc update   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] pinctrl: remove two unused global variables   Linus Walleij
• [PATCH 1/3] ARM: at91: add accessor to manage smc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] pata/at91: use new introduce smc accessor   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] ide/at91: use new introduce smc accessor   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] at91: 9260 and 9g20 add support of join SRAM Memory Mapping   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] usb: at91: fix clk_get error handling   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] ARM: at91: usb ohci rename vbus_pin_inverted to vbus_pin_active_low   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: at91: make st soc independent   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH 0/8] Add common ARM cpuidle init code   Arnd Bergmann
• [PATCH v4 3/6] ARM: vexpress: Add DT support for the motherboard   Arnd Bergmann
• [PATCH] arm, davinci: configure davinci aemif chipselects through OF   Arnd Bergmann
• [PATCH 0/2] Add device tree support for MAX8997   Thomas Abraham
• [PATCH 1/2] mfd: add irq domain support for max8997 interrupts   Thomas Abraham
• [PATCH 2/2] regulator: add device tree support for max8997   Thomas Abraham
• [GIT PULL] sa1100 fixes for 3.2   Arnd Bergmann
• [PATCH 4/7] amp/omap: add a remoteproc driver   Tony Lindgren
• [PATCH 4/7] amp/omap: add a remoteproc driver   Ohad Ben-Cohen
• [GIT PULL] arm-soc fixes for 3.2, part 3   Arnd Bergmann
• [PATCH-V5 0/3] Introducing TI's New SoC/board AM335XEVM   Tony Lindgren
• [PATCH 0/3] watchdog: new driver for STMP3xxx/MX23/MX28   Wolfram Sang
• [PATCH 1/3] rtc: stmp3xxx: add wdt-accessor function   Wolfram Sang
• [PATCH 2/3] watchdog: add new driver for STMP3xxx and i.MX23/28   Wolfram Sang
• [PATCH 3/3] watchdog: remove old STMP driver   Wolfram Sang
• [PATCH 0/4] Add generic ARM ISA condition code check   Leif Lindholm
• [PATCH 1/4] Add generic ARM instruction set condition code checks.   Leif Lindholm
• [PATCH 2/4] Use generic ARM instruction set condition code checks for nwfpe.   Leif Lindholm
• [PATCH 3/4] Add condition code checking to SWP emulation handler.   Leif Lindholm
• [PATCH 4/4] Use generic ARM instruction set condition code checks for kprobes.   Leif Lindholm
• [RFC PATCH 1/8] ARM: Add commonly used cpuidle init code   Rob Lee
• [PATCH v3] ARM: Add generic instruction opcode manipulation helpers   Dave Martin
• [PATCH v6 04/10] arm/tegra: prepare early init for multiple tegra variants   Stephen Warren
• [PATCH v6 10/10] arm/tegra: add support for tegra30 based board cardhu   Stephen Warren
• [GIT PULL v3] Linux support for ARM LPAE   Russell King - ARM Linux
• [PATCH v6 00/10] Add support for tegra30 and cardhu   Stephen Warren
• [GIT PULL v3] Linux support for ARM LPAE   Catalin Marinas
• [PATCH v6 04/10] arm/tegra: prepare early init for multiple tegra variants   Colin Cross
• [GIT PULL] OMAP: PM support for OMAP4 MPU sub-system   Kevin Hilman
• [PATCH v8 0/6] kexec fixes and soft restart code   Will Deacon
• [PATCH v8 1/4] ARM: lib: add call_with_stack function for safely changing stack   Will Deacon
• [PATCH v8 2/4] ARM: reset: implement soft_restart for jumping to a physical address   Will Deacon
• [PATCH v8 3/4] ARM: stop: execute platform callback from cpu_stop code   Will Deacon
• [PATCH v8 4/4] ARM: kexec: use soft_restart for branching to the reboot buffer   Will Deacon
• [GIT PULL] OMAP: PM support for OMAP4 MPU sub-system   Tony Lindgren
• [PATCH] ARM: OMAP3: hsmmc: fix MMC 2 setup for AM35x   Igor Grinberg
• [PATCH] arm: omap: rm-680: fix the panic during boot   Paul Walmsley
• [GIT PULL] OMAP: PM support for OMAP4 MPU sub-system   Kevin Hilman
• [PATCH v2] omap: rx51: fix USB   Felipe Contreras
• [PATCH] omap: rx51: initialize isp1704 properly   Felipe Contreras
• [GIT PULL] sa1100 fixes for 3.2   Russell King - ARM Linux
• [GIT PULL] OMAP: PM support for OMAP4 MPU sub-system   Tony Lindgren
• [patch 1/1] arch/arm/kernel/setup.c: initialize arm_dma_zone_size earlier   Arnaud Patard (Rtp)
• [Linaro-mm-sig] [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Daniel Vetter
• [RFC PATCH 1/8] ARM: Add commonly used cpuidle init code   Rob Lee
• [PATCH 1/2] ARM: at91: make x40s use free of at91_sys_read/write   Ryan Mallon
• [RFC 0/3] pinctrl: add a driver for NVIDIA Tegra   Stephen Warren
• [PATCH 3/3] ARM: S3C64XX: Implement basic power domain support   Rafael J. Wysocki
• [PATCH 1/3] ARM: at91: add accessor to manage smc   Ryan Mallon
• [PATCH] Documentation/pinctrl: various minor fixes   Uwe Kleine-König
• [PATCH 3/3] ARM: S3C64XX: Implement basic power domain support   Rafael J. Wysocki
• [PATCH] Documentation/pinctrl: various minor fixes   Stephen Warren
• [RFC PATCH v1 5/7] media: v4l2: introduce two IOCTLs for face detection   Sylwester Nawrocki
• [PATCH] Documentation/pinctrl: various minor fixes   Uwe Kleine-König
• [PATCH] ARM: OMAP3: hwmod data: disable multiblock reads on MMC1/2 on OMAP34xx/35xx <= ES2.1   Steve Sakoman
• [PATCH 2/3] pata/at91: use new introduce smc accessor   Ryan Mallon
• [PATCH v2] Documentation/pinctrl: various minor fixes   Uwe Kleine-König
• [PATCH 3/3] ide/at91: use new introduce smc accessor   Ryan Mallon
• [PATCH] [RFC] pinctrl: add a driver for Energy Micro's efm32 SoCs   Uwe Kleine-König
• [PATCH v2] Documentation/pinctrl: various minor fixes   Stephen Warren
• [PATCH] ARM: at91: make st soc independent   Ryan Mallon
• [PATCH 1/2] DMA: PL330: Merge PL330 driver into drivers/dma/   Linus Walleij
• [PATCH] ARM: OMAP3: hwmod data: disable multiblock reads on MMC1/2 on OMAP34xx/35xx <= ES2.1   Paul Walmsley
• [PATCH v2] ARM: S3C64XX: Implement basic power domain support   Rafael J. Wysocki
• [PATCH] [RFC] pinctrl: add a driver for Energy Micro's efm32 SoCs   Arnd Bergmann
• [PATCH 7/8] OMAP4: clock: Add CPU local timer clock node.   Turquette, Mike
• [PATCH] ARM: OMAP3: hwmod data: disable multiblock reads on MMC1/2 on OMAP34xx/35xx <= ES2.1   Steve Sakoman
• [PATCH] ARM: OMAP1: Move dpll1 rates selection from config to runtime   Janusz Krzysztofik
• [PATCH] [RFC] pinctrl: add a driver for Energy Micro's efm32 SoCs   Stephen Warren
• [RFC PATCH v1 6/7] media: video: introduce face detection driver module   Sylwester Nawrocki
• [patch 1/1] arch/arm/kernel/setup.c: initialize arm_dma_zone_size earlier   Russell King - ARM Linux
• [PATCH v2] ARM: S3C64XX: Implement basic power domain support   Kukjin Kim
• [PATCH 1/3] rtc: stmp3xxx: add wdt-accessor function   Shawn Guo
• [PATCH 1/3] omap_hsmmc: consider MMC_PM_KEEP_POWER on suspend/resume   Tony Lindgren
• [PATCH] ARM: OMAP3: hsmmc: fix MMC 2 setup for AM35x   Tony Lindgren
• [RFC/PATCH] ARM: OMAP2+: Add chip_select to ads7846 init   Tony Lindgren
• [PATCH v2 1/2] OMAP2+: DMA: Workaround for invalid source position   Tony Lindgren
• [PATCHv2] ARM: OMAP: hsmmc: Fix mux for non-OMAP pins   Tony Lindgren
• [PATCH] OMAP2, 3: DSS2: Include linux/delay.h and common.h to fix build errors   Tony Lindgren
• [PATCH 2/3] arm/dts: OMAP: Remove bootargs node from board files   Tony Lindgren
• [PATCH] [RFC] pinctrl: add a driver for Energy Micro's efm32 SoCs   Shawn Guo
• [PATCH v2] arm/imx6: add restart support for imx6q   Shawn Guo
• [PATCHv7 1/3] OMAP: I2C: Reset support   Paul Walmsley
• [PATCH v2] ARM: OMAP1: Move dpll1 rates selection from config to runtime   Janusz Krzysztofik
• [PATCH] ARM: OMAP1: Set the omap1623 sram size to 16K   Tony Lindgren
• [PATCH v2] ARM: OMAP1: Move dpll1 rates selection from config to runtime   Tony Lindgren
• [GIT PULL] sa1100 fixes for 3.2   Haojian Zhuang
• [PATCH 2/2] regulator: add device tree support for max8997   Kyungmin Park
• [PATCH v2] ARM: OMAP1: Move dpll1 rates selection from config to runtime   Janusz Krzysztofik
• [PATCH 1/1] ARM: imx: fix cpufreq build errors   Richard Zhao
• [PATCH] arm/imx: fix cpufreq build error   Shawn Guo
• [PATCH] [RFC] pinctrl: add a driver for Energy Micro's efm32 SoCs   Stephen Warren
• [PATCH 1/2] mfd: add irq domain support for max8997 interrupts   MyungJoo Ham
• [PATCH] [RFC] pinctrl: add a driver for Energy Micro's efm32 SoCs   Shawn Guo
• [RFC PATCH v1 5/7] media: v4l2: introduce two IOCTLs for face detection   Ming Lei
• [PATCH 1/2] mfd: add irq domain support for max8997 interrupts   Mark Brown
• [PATCH] [RFC] pinctrl: add a driver for Energy Micro's efm32 SoCs   Stephen Warren
• [PATCH] [RFC] pinctrl: add a driver for Energy Micro's efm32 SoCs   Shawn Guo
• [PATCH 2/2] regulator: add device tree support for max8997   Thomas Abraham
• [PATCH 1/2] mfd: add irq domain support for max8997 interrupts   Thomas Abraham
• [PATCH 0/7] Introducing a generic AMP framework   Rusty Russell
• [PATCH v3] backlight/ld9040.c: regulator control in the driver   Donghwa Lee
• [PATCH 1/2] mfd: add irq domain support for max8997 interrupts   Mark Brown
• [PATCH] ARM: at91: make st soc independent   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] regulator: add device tree support for max8997   Mark Brown
• [PATCH 3/3] ide/at91: use new introduce smc accessor   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] pata/at91: use new introduce smc accessor   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] ARM: at91: add accessor to manage smc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] mfd: add irq domain support for max8997 interrupts   Thomas Abraham
• [PATCH 1/2] mfd: add irq domain support for max8997 interrupts   Mark Brown
• [PATCH 1/3] ARM: at91: add accessor to manage smc   Ryan Mallon
• [PATCH 1/2] mfd: add irq domain support for max8997 interrupts   Thomas Abraham
• [PATCHv7 1/3] OMAP: I2C: Reset support   Shubhrajyoti
• [PATCH 2/2] regulator: add device tree support for max8997   Thomas Abraham
• [PATCH 1/2] mfd: add irq domain support for max8997 interrupts   Mark Brown
• [RFC PATCH 1/8] ARM: Add commonly used cpuidle init code   Mark Brown
• [PATCH 5/5 v2] ARM: OMAP1: recalculate loops per jiffy after dpll1 reprogram   Russell King - ARM Linux
• [PATCH v6 03/10] arm/tegra: prepare clock code for multiple tegra variants   Peter De Schrijver
• [PATCH] arm/imx: fix cpufreq build error   Fabio Estevam
• [PATCH 1/3] rtc: stmp3xxx: add wdt-accessor function   Wolfram Sang
• [PATCH] [RFC] pinctrl: add a driver for Energy Micro's efm32 SoCs   Uwe Kleine-König
• [PATCH] arm/imx: fix cpufreq build error   Wolfram Sang
• [PATCH] [RFC] pinctrl: add a driver for Energy Micro's efm32 SoCs   Uwe Kleine-König
• [PATCH 0/4] Implement RTC support for S3C2443/S3C2416/S3C2450   Heiko Stübner
• [PATCH 1/4] ARM: SAMSUNG: cleanup of rtc register definitions   Heiko Stübner
• [PATCH 2/4] rtc-s3c: make room for more variants in devicetree block   Heiko Stübner
• [PATCH 3/4] rtc-s3c: add variants for S3C2443 and S3C2416   Heiko Stübner
• [PATCH 4/4] ARM: S3C2443/S3C2416: add s3c_rtc_setname and rename rtc devices   Heiko Stübner
• [PATCH 5/5 v2] ARM: OMAP1: recalculate loops per jiffy after dpll1 reprogram   Janusz Krzysztofik
• [PATCH 5/5 v2] ARM: OMAP1: recalculate loops per jiffy after dpll1 reprogram   Janusz Krzysztofik
• [GIT PULL] i.MX fixes   Sascha Hauer
• [PATCH v3 1/2] MX2: Add platform definitions for eMMa-PrP device.   Sascha Hauer
• [GIT PULL] i.MX fixes   Sascha Hauer
• [PATCH v4 5/5] ARM: davinci: create new common platform header for davinci   Sergei Shtylyov
• [PATCH 2/3] pata/at91: use new introduce smc accessor   Sergei Shtylyov
• [PATCH v2] Documentation/pinctrl: various minor fixes   Linus Walleij
• [PATCH 3/3] ide/at91: use new introduce smc accessor   Sergei Shtylyov
• [PATCH] [RFC] pinctrl: add a driver for Energy Micro's efm32 SoCs   Sascha Hauer
• [PATCH v6 04/10] arm/tegra: prepare early init for multiple tegra variants   Peter De Schrijver
• imx_v4_v5_defconfig: Need to specify LOADADDR   Fabio Estevam
• [PATCH v2] ARM: pl330: Fix a race condition   Javi Merino
• imx_v4_v5_defconfig: Need to specify LOADADDR   Sascha Hauer
• [PATCH 1/2] tty: serial: imx: Allow UART to be a source for wakeup   Fabio Estevam
• [PATCH 2/2] ARM: mach-mx27_3ds: Allow UART to be a source for wakeup.   Fabio Estevam
• [PATCH] i2c: i2c-s3c2410: Add a cpu_relax() to busy wait for bus idle   Mark Brown
• [PATCH] [RFC] pinctrl: add a driver for Energy Micro's efm32 SoCs   Uwe Kleine-König
• [PATCH v2] ARM: pl330: Fix a race condition   Jassi Brar
• [PATCH v2 1/2] tty: serial: imx: Allow UART to be a source for wakeup   Fabio Estevam
• [PATCH 2/4] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller   Rob Herring
• [PATCH v2] ARM: pl330: Fix a race condition   Javi Merino
• [GIT PULL] i.MX fixes   Arnd Bergmann
• [PATCH v2 00/10] OMAP4: Add DT support for i2c and twl6030   Benoit Cousson
• [PATCH v2 01/10] ARM: OMAP2+: pm: Do not init statically the SR and voltage layer with DT   Benoit Cousson
• [RFC PATCH 1/8] ARM: Add commonly used cpuidle init code   Rob Herring
• [PATCH] [RFC] pinctrl: add a driver for Energy Micro's efm32 SoCs   Arnd Bergmann
• [PATCH 3/3] ide/at91: use new introduce smc accessor   Arnd Bergmann
• [RFC 1/3] pinctrl: add a driver for NVIDIA Tegra   Linus Walleij
• [PATCH v2 00/10] OMAP4: Add DT support for i2c and twl6030   Cousson, Benoit
• [PATCH v2 00/10] OMAP4: Add DT support for i2c and twl6030   Benoit Cousson
• [PATCH v2 01/10] ARM: OMAP2+: pm: Do not init statically the SR and voltage layer with DT   Benoit Cousson
• [PATCH v2 02/10] i2c: OMAP: Add DT support for i2c controller   Benoit Cousson
• [PATCH v2 03/10] mfd: twl-core: Add initial DT support for twl4030/twl6030   Benoit Cousson
• [PATCH v2 04/10] rtc: rtc-twl: Add DT support for RTC inside twl4030/twl6030   Benoit Cousson
• [PATCH v2 05/10] arm/dts: OMAP4: Add i2c controller nodes   Benoit Cousson
• [PATCH v2 06/10] arm/dts: OMAP3: Add i2c controller nodes   Benoit Cousson
• [PATCH v2 07/10] arm/dts: omap4-panda: Add twl6030 and i2c EEPROM   Benoit Cousson
• [PATCH v2 08/10] arm/dts: omap4-sdp: Add twl6030, i2c3 and i2c4 devices   Benoit Cousson
• [PATCH v2 09/10] arm/dts: omap3-beagle: Add twl4030 and i2c EEPROM   Benoit Cousson
• [PATCH v2 10/10] ARM: OMAP2+: board-generic: Remove i2c static init   Benoit Cousson
• [Linaro-mm-sig] [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Arnd Bergmann
• [PATCH 0/7] Introducing a generic AMP framework   Ohad Ben-Cohen
• [PATCH] [RFC] pinctrl: add a driver for Energy Micro's efm32 SoCs   Uwe Kleine-König
• [PATCH v2] ARM: pl330: Fix a race condition   Jassi Brar
• [PATCH v6 01/10] arm/tegra: initial device tree for tegra30   Rob Herring
• [GIT PULL] pxa changes for v3.3   Arnd Bergmann
• [Linaro-mm-sig] [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Alan Cox
• [PATCH v6 10/10] arm/tegra: add support for tegra30 based board cardhu   Rob Herring
• [PATCH 2/4] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller   Cousson, Benoit
• [PATCH v2] ARM: pl330: Fix a race condition   Javi Merino
• Adding remoteproc/rpmsg to linux-next   Ohad Ben-Cohen
• [PATCH] [RFC] pinctrl: add a driver for Energy Micro's efm32 SoCs   Dong Aisheng
• [PATCH 0/3] arm: omap: add support for Nokia RM-696 (Nokia N9)   Aaro Koskinen
• [PATCH 1/3] arm: tools: mach-types: add nokia_rm696   Aaro Koskinen
• [PATCH 2/3] arm: mach-omap2: sdram-nokia: add 200 MHz memory timings info   Aaro Koskinen
• [PATCH 3/3] arm: omap: add minimal support for Nokia RM-696   Aaro Koskinen
• [RFC PATCH v1 6/7] media: video: introduce face detection driver module   Ming Lei
• [PATCH 1/6] irqdomain: export irq_domain_simple_ops for !CONFIG_OF   Arnd Bergmann
• [PATCH 2/4] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller   Rob Herring
• [PATCH 0/4] Add generic ARM ISA condition code check   Will Deacon
• [PATCH 0/4] Add generic ARM ISA condition code check   Dave Martin
• [PATCH v4] ARM: sched_clock: allow sched_clock to be selected at runtime   Marc Zyngier
• [PATCH 1/4] Add generic ARM instruction set condition code checks.   Will Deacon
• [PATCH v6 10/10] arm/tegra: add support for tegra30 based board cardhu   Peter De Schrijver
• [PATCH 4/4] Use generic ARM instruction set condition code checks for kprobes.   Will Deacon
• [PATCH v3 1/2] tty: serial: imx: Allow UART to be a source for wakeup   Fabio Estevam
• [RFC PATCH 1/8] ARM: Add commonly used cpuidle init code   Rob Lee
• [PATCH 3/4] Add condition code checking to SWP emulation handler.   Will Deacon
• [PATCH 2/4] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller   Cousson, Benoit
• [PATCH 61/62] highmem: kill all __kmap_atomic()   Ralf Baechle
• [PATCH 2/4] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller   Rob Herring
• [PATCH 4/4] Use generic ARM instruction set condition code checks for kprobes.   Leif Lindholm
• [PATCH] ARM: remove header files included more than once   Omar Ramirez Luna
• [PATCH 0/8 v4] ARM: DMA-mapping framework redesign   Marek Szyprowski
• [PATCH 1/8] ARM: dma-mapping: remove offset parameter to prepare for generic dma_ops   Marek Szyprowski
• [PATCH 2/8] ARM: dma-mapping: use asm-generic/dma-mapping-common.h   Marek Szyprowski
• [PATCH 3/8] ARM: dma-mapping: implement dma sg methods on top of any generic dma ops   Marek Szyprowski
• [PATCH 4/8] ARM: dma-mapping: move all dma bounce code to separate dma ops structure   Marek Szyprowski
• [PATCH 5/8] ARM: dma-mapping: remove redundant code and cleanup   Marek Szyprowski
• [PATCH 6/8] common: dma-mapping: change alloc/free_coherent method to more generic alloc/free_attrs   Marek Szyprowski
• [PATCH 7/8] ARM: dma-mapping: use alloc, mmap, free from dma_ops   Marek Szyprowski
• [PATCH 8/8] ARM: dma-mapping: add support for IOMMU mapper   Marek Szyprowski
• [PATCH 4/4] Use generic ARM instruction set condition code checks for kprobes.   Will Deacon
• [PATCH] [RFC] pinctrl: add a driver for Energy Micro's efm32 SoCs   Stephen Warren
• [PATCH v2] ARM: pl330: Fix a race condition   Jassi Brar
• [PATCH] [RFC] pinctrl: add a driver for Energy Micro's efm32 SoCs   Stephen Warren
• [PATCH 2/4] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller   Cousson, Benoit
• [RFC 1/3] pinctrl: add a driver for NVIDIA Tegra   Tony Lindgren
• [PATCH] [RFC] pinctrl: add a driver for Energy Micro's efm32 SoCs   Tony Lindgren
• [RFC 1/3] pinctrl: add a driver for NVIDIA Tegra   Stephen Warren
• [GIT PULL] OMAP: minor PM cleanups for v3.3   Kevin Hilman
• [PATCH 4/4] Use generic ARM instruction set condition code checks for kprobes.   Leif Lindholm
• [PATCH 1/4] Add generic ARM instruction set condition code checks.   Leif Lindholm
• [PATCH] [RFC] pinctrl: add a driver for Energy Micro's efm32 SoCs   Tony Lindgren
• [RFC 1/3] pinctrl: add a driver for NVIDIA Tegra   Tony Lindgren
• [PATCH 4/4] Use generic ARM instruction set condition code checks for kprobes.   Jon Medhurst (Tixy)
• [PATCH 2/3] arm: mach-omap2: sdram-nokia: add 200 MHz memory timings info   Tony Lindgren
• [PATCH 1/3] arm: tools: mach-types: add nokia_rm696   Tony Lindgren
• [PATCH 4/4] Use generic ARM instruction set condition code checks for kprobes.   Leif Lindholm
• [PATCH 4/4] Use generic ARM instruction set condition code checks for kprobes.   Leif Lindholm
• [PATCH v4 1/3] ARM: OMAP: TI81XX: Prepare for addition of TI814X support   Pedanekar, Hemant
• [PATCH v6 03/10] arm/tegra: prepare clock code for multiple tegra variants   Colin Cross
• [PATCH v6 04/10] arm/tegra: prepare early init for multiple tegra variants   Colin Cross
• [PATCH 3/3] ide/at91: use new introduce smc accessor   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v4] tty: serial: imx: Allow UART to be a source for wakeup   Fabio Estevam
• [PATCH 2/3] pata/at91: use new introduce smc accessor   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] ARM: at91: make x40s use free of at91_sys_read/write   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/4] Add generic ARM ISA condition code check v3   Leif Lindholm
• [PATCH 1/4] Add generic ARM instruction set condition code checks.   Leif Lindholm
• [PATCH 2/4] Use generic ARM instruction set condition code checks for nwfpe.   Leif Lindholm
• [PATCH 3/4] Add condition code checking to SWP emulation handler.   Leif Lindholm
• [PATCH 4/4] Use generic ARM instruction set condition code checks for kprobes.   Leif Lindholm
• [PATCH v5 0/9] Versatile Express DT support   Pawel Moll
• [PATCH v5 1/9] ARM: versatile: Add missing ENDPROC to headsmp.S   Pawel Moll
• [PATCH v5 2/9] ARM: vexpress: Get rid of MMIO_P2V   Pawel Moll
• [PATCH v5 3/9] ARM: vexpress: Add Device Tree support   Pawel Moll
• [PATCH v5 4/9] ARM: vexpress: Motherboard RS1 memory map support   Pawel Moll
• [PATCH v5 5/9] ARM: versatile: Map local timers using Device Tree when possible   Pawel Moll
• [PATCH v5 6/9] ARM: vexpress: Use FDT data in platform SMP calls   Pawel Moll
• [PATCH v5 7/9] ARM: vexpress: Add Device Tree for V2P-CA5s core tile   Pawel Moll
• [PATCH v5 8/9] ARM: vexpress: Add Device Tree for V2P-CA9 core tile   Pawel Moll
• [PATCH v5 9/9] ARM: vexpress: Add Device Tree for V2P-CA15 core tile (TC1 variant)   Pawel Moll
• [PATCH 2/3] arm: mach-omap2: sdram-nokia: add 200 MHz memory timings info   Aaro Koskinen
• [RFC PATCH 1/8] ARM: Add commonly used cpuidle init code   Nicolas Pitre
• [PATCH v2] ARM: pl330: Fix a race condition   Javi Merino
• [PATCH 2/3] arm: mach-omap2: sdram-nokia: add 200 MHz memory timings info   Tony Lindgren
• [PATCH v4 1/3] ARM: OMAP: TI81XX: Prepare for addition of TI814X support   Tony Lindgren
• [GIT PULL] OMAP: minor PM cleanups for v3.3   Tony Lindgren
• [PATCH] ARM: OMAP3LOGIC: Adding DSS support   Tony Lindgren
• [PATCH] arm: standardize /proc/iomem "Kernel code" name   Kees Cook
• [GIT PULL] PM support for omap4 for v3.3 merge window   Tony Lindgren
• [GIT PULL] omap1 changes for v3.3 merge window   Tony Lindgren
• [PATCH] ARM: only show modules in the memory layout for MODULES=y   Uwe Kleine-König
• [PATCH 1/2] ARM: OMAP: dmtimer: fix sleeping function called from invalid context   Tony Lindgren
• [GIT PULL] omap1 changes for v3.3 merge window   Tony Lindgren
• [PATCH] ARM: provide XIP_VIRT_ADDR for no-MMU builds   Uwe Kleine-König
• [PATCH v2] ARM: S3C64XX: Implement basic power domain support   Rafael J. Wysocki
• [PATCH 1/2] ARM: OMAP: dmtimer: fix sleeping function called from invalid context   Ramirez Luna, Omar
• [PATCH v4] ARM: sched_clock: allow sched_clock to be selected at runtime   Nicolas Pitre
• [PATCH] irq: convert generic-chip to use irq_domain   Rob Herring
• [Linaro-mm-sig] [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Robert Morell
• [PATCH] gpio: pl061: drop extra check for NULL platform_data   Rob Herring
• [PATCH] ARM: provide XIP_VIRT_ADDR for no-MMU builds   Nicolas Pitre
• [PATCH] ARM: only show modules in the memory layout for MODULES=y   Nicolas Pitre
• [PATCH] arm: standardize /proc/iomem "Kernel code" name   Nicolas Pitre
• [PATCH 1/2] usb: at91: fix clk_get error handling   Greg KH
• [RFC 1/3] pinctrl: add a driver for NVIDIA Tegra   Linus Walleij
• [PATCH] ARM: OMAP3LOGIC: Adding DSS support   Alex Gershgorin
• [RFC 1/3] pinctrl: add a driver for NVIDIA Tegra   Linus Walleij
• [PATCH 0/3] Support Samsung S5P OHCI device and driver   Greg KH
• [PATCH 1/3] pinctrl: Implement PINMUX_MAP_SYS_HOG   Stephen Warren
• [PATCH 2/3] arm/u300: Don't use PINMUX_MAP_PRIMARY*   Stephen Warren
• [PATCH 3/3] pinctrl: Don't create a device for each pin controller   Stephen Warren
• [PATCH] [RFC] pinctrl: add a driver for Energy Micro's efm32 SoCs   Linus Walleij
• [PATCH] [RFC] pinctrl: add a driver for Energy Micro's efm32 SoCs   Stephen Warren
• [PATCH] [RFC] pinctrl: add a driver for Energy Micro's efm32 SoCs   Linus Walleij
• [PATCH 5/5 v2] ARM: OMAP1: recalculate loops per jiffy after dpll1 reprogram   Russell King - ARM Linux
• [PATCH] ARM: provide XIP_VIRT_ADDR for no-MMU builds   Russell King - ARM Linux
• [PATCH v2 01/10] ARM: OMAP2+: pm: Do not init statically the SR and voltage layer with DT   Kevin Hilman
• [PATCH RESEND v5 0/3] Add support for TI814X processor series   Hemant Pedanekar
• [PATCH RESEND v5 1/3] ARM: OMAP: TI81XX: Prepare for addition of TI814X support   Hemant Pedanekar
• [PATCH RESEND v5 2/3] ARM: OMAP: TI814X: Add cpu type macros and detection support   Hemant Pedanekar
• [PATCH RESEND v5 3/3] ARM: OMAP: TI814X: Create board support and enable build for TI8148 EVM   Hemant Pedanekar
• [PATCH RESEND v5 0/3] Add support for TI814X processor series   Hemant Pedanekar
• [PATCH RESEND v5 1/3] ARM: OMAP: TI81XX: Prepare for addition of TI814X support   Hemant Pedanekar
• [PATCH RESEND v5 2/3] ARM: OMAP: TI814X: Add cpu type macros and detection support   Hemant Pedanekar
• [PATCH RESEND v5 3/3] ARM: OMAP: TI814X: Create board support and enable build for TI8148 EVM   Hemant Pedanekar
• [PATCH] ARM: pxa: Include linux/export.h in balloon3.c   Axel Lin
• [Linaro-mm-sig] [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Daniel Vetter
• [PATCH v2] omap: rx51: fix USB   Sebastian Reichel
• [PATCH 4/4] Use generic ARM instruction set condition code checks for kprobes.   Tixy
• [PATCH] OMAP2+: hwmod: remove unused voltagedomain pointer from kerneldoc   jean.pihet at newoldbits.com
• [PATCH] ARM: provide XIP_VIRT_ADDR for no-MMU builds   Uwe Kleine-König
• [PATCH] ARM: only show modules in the memory layout for MODULES=y   Uwe Kleine-König
• [PATCH] ARM: provide XIP_VIRT_ADDR for no-MMU builds   Russell King - ARM Linux
• [Linaro-mm-sig] [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Mauro Carvalho Chehab
• [PATCH 5/5 v2] ARM: OMAP1: recalculate loops per jiffy after dpll1 reprogram   Janusz Krzysztofik
• [PATCH 1/4] Add generic ARM instruction set condition code checks.   Will Deacon
• [PATCH 2/4] Use generic ARM instruction set condition code checks for nwfpe.   Will Deacon
• [PATCH 3/4] Add condition code checking to SWP emulation handler.   Will Deacon
• [PATCH 4/4] Use generic ARM instruction set condition code checks for kprobes.   Will Deacon
• [PATCH v5 5/9] ARM: versatile: Map local timers using Device Tree when possible   Sergei Shtylyov
• [PATCH v8 REPOST 17/24] gpio/omap: fix debounce clock handling   DebBarma, Tarun Kanti
• [PATCH] ARM: Exynos: Add irq domain and device tree support for interrupt combiner   Thomas Abraham
• [patch 1/1] arch/arm/kernel/setup.c: initialize arm_dma_zone_size earlier   Russell King - ARM Linux
• [PATCH 03/62] arm: remove the second argument of k[un]map_atomic()   Russell King - ARM Linux
• [PATCH] ARM: provide XIP_VIRT_ADDR for no-MMU builds   Uwe Kleine-König
• [PATCH 1/5] ASoC: omap-dmic: Add device tree bindings   Mark Brown
• [PATCH 2/4] rtc-s3c: make room for more variants in devicetree block   Thomas Abraham
• [PATCH 3/4] rtc-s3c: add variants for S3C2443 and S3C2416   Thomas Abraham
• [PATCH v4] tty: serial: imx: Allow UART to be a source for wakeup   Shawn Guo
• [RESEND][PATCH] ARM: Exynos: Add irq domain and device tree support for interrupt combiner   Thomas Abraham
• [PATCH v2 0/4] ARM: Exynos4: Add irq domain and device tree support for wakeup interrupts   Thomas Abraham
• [PATCH v2 1/4] ARM: Exynos4: Simplify EINT number to linux irq number translation   Thomas Abraham
• [PATCH v2 2/4] ARM: Exynos4: Add irq_domain support for wakeup interrupts   Thomas Abraham
• [PATCH v2 3/4] ARM: Exynos4: Remove arch_initcall for wakeup interrupt initialization   Thomas Abraham
• [PATCH v2 4/4] ARM: Exynos4: Add device tree support for external wakeup interrupt controller   Thomas Abraham
• [PATCH 2/2] DMA: PL330: Removes useless function   Jassi Brar
• [PATCH] ARM: MM: Configure the number of banks   Russell King - ARM Linux
• [PATCH 1/2] ARM: only look for TCM on ARM926 and later   Russell King - ARM Linux
• [PATCH] ARM: MM: Configure the number of banks   Russell King - ARM Linux
• [PATCH v2] ARM: pl330: Fix a race condition   Jassi Brar
• [RFC] virtio: use mandatory barriers for remote processor vdevs   Michael S. Tsirkin
• [PATCH] SPI: add CSR SiRFprimaII SPI controller driver   Barry Song
• [PATCH] SPI: add CSR SiRFprimaII SPI controller driver   Wolfram Sang
• [PATCH v2] ARM: pl330: Fix a race condition   Javi Merino
• [PATCH] irq: convert generic-chip to use irq_domain   Shawn Guo
• [PATCH v2] ARM: pl330: Fix a race condition   Jassi Brar
• [RFC PATCH v1 5/7] media: v4l2: introduce two IOCTLs for face detection   Sylwester Nawrocki
• [PATCH v2] ARM: pl330: Fix a race condition   Javi Merino
• [RFC PATCH v1 6/7] media: video: introduce face detection driver module   Sylwester Nawrocki
• [RFC PATCH v1 6/7] media: video: introduce face detection driver module   Sylwester Nawrocki
• [PATCH] ARM: PL330: Fix driver freeze   Javi Merino
• [PATCH] [RFC] pinctrl: add a driver for Energy Micro's efm32 SoCs   Tony Lindgren
• [patch 1/1] arch/arm/kernel/setup.c: initialize arm_dma_zone_size earlier   Arnaud Patard (Rtp)
• [RFC 1/3] pinctrl: add a driver for NVIDIA Tegra   Tony Lindgren
• [PATCH 00/10] ARM: OMAP1: ams-delta: replace custom I/O with GPIO   Janusz Krzysztofik
• [PATCH 01/10] GPIO: gpio-generic: Move initialization up to postcore   Janusz Krzysztofik
• [PATCH 02/10] ARM: OMAP1: ams-delta: Convert latches to basic_mmio_gpio   Janusz Krzysztofik
• [PATCH 03/10] ARM: OMAP1: ams-delta: Supersede custom led device by leds-gpio   Janusz Krzysztofik
• [PATCH 04/10] LED: Drop leds-ams-delta driver   Janusz Krzysztofik
• [PATCH 05/10] MTD: NAND: ams-delta: Use GPIO instead of custom I/O   Janusz Krzysztofik
• [PATCH 06/10] ARM: OMAP1: ams-delta: Use GPIO API in modem setup   Janusz Krzysztofik
• [PATCH 07/10] ASoC: OMAP: ams-delta: Drive modem/codec pins over GPIO API   Janusz Krzysztofik
• [PATCH 08/10] omapfb: lcd_ams_delta: Drive control lines over GPIO   Janusz Krzysztofik
• [PATCH 09/10] input: serio: ams-delta: Toggle keyboard power over GPIO   Janusz Krzysztofik
• [PATCH 10/10] ARM: OMAP1: ams-delta: Drop custom I/O functions   Janusz Krzysztofik
• [RFC] virtio: use mandatory barriers for remote processor vdevs   Benjamin Herrenschmidt
• [PATCH 6/8] common: dma-mapping: change alloc/free_coherent method to more generic alloc/free_attrs   Stephen Rothwell
• Adding remoteproc/rpmsg to linux-next   Stephen Rothwell
• [PATCH v6 04/10] arm/tegra: prepare early init for multiple tegra variants   Olof Johansson
• [PATCH v6 10/10] arm/tegra: add support for tegra30 based board cardhu   Olof Johansson
• arm and patch phys offset   Nicolas Pitre
• PL330: Merge PL330 drivers   Kukjin Kim
• [PATCH] ARM: remove header files included more than once   Haojian Zhuang
• [PATCH] irq: convert generic-chip to use irq_domain   Rob Herring
• [PATCH v3] mfd: mc13xxx: add device tree probe support   Shawn Guo
• [PATCH v2 3/4] regulator: mc13892: add device tree probe support   Shawn Guo
• [PATCH 2/2] DMA: PL330: Removes useless function   Boojin Kim
• [PATCH 1/2] DMA: PL330: Merge PL330 driver into drivers/dma/   Boojin Kim
• [PATCH v2 1/2] DMA: PL330: Merge PL330 driver into drivers/dma/   Boojin Kim
• [AT91 PULL] gpio cleanup pull request for 3.3   Olof Johansson
• [GIT PULL] omap1 changes for v3.3 merge window   Olof Johansson
• [GIT PULL] PM support for omap4 for v3.3 merge window   Olof Johansson
• [PATCH] irq: convert generic-chip to use irq_domain   Rob Herring
• [RFC] virtio: use mandatory barriers for remote processor vdevs   Amos Kong
• [PATCH v2 3/4] regulator: mc13892: add device tree probe support   Mark Brown
• [RESEND][PATCH] ARM: Exynos: Add irq domain and device tree support for interrupt combiner   Rob Herring
• [PATCH 0/7] arm/imx6: add imx6q sabrelite board and imx6q cpufreq support   Richard Zhao
• [PATCH 1/7] arm/imx6: add imx6q sabrelite board support   Richard Zhao
• [PATCH 2/7] arm/imx: cpufreq: add multi-core support   Richard Zhao
• [PATCH 3/7] ARM: imx: fix cpufreq build errors   Richard Zhao
• [PATCH 4/7] arm/imx: fix cpufreq section mismatch   Richard Zhao
• [PATCH 5/7] arm/imx: add cpu_voltage to cpu_op   Richard Zhao
• [PATCH 6/7] arm/imx6q: add cpufreq support   Richard Zhao
• [PATCH 7/7] arm/imx6q: register arm_clk to clkdev   Richard Zhao
• [PULL] Calxeda Highbank for 3.3   Rob Herring
• [PATCH v4] ARM: sched_clock: allow sched_clock to be selected at runtime   Rob Herring
• [PATCH 07/10] ASoC: OMAP: ams-delta: Drive modem/codec pins over GPIO API   Mark Brown
• [PATCH 3/7] ARM: imx: fix cpufreq build errors   Richard Zhao
• [PATCH 00/10] ARM: OMAP1: ams-delta: replace custom I/O with GPIO   Jonathan McDowell
• [RFC] virtio: use mandatory barriers for remote processor vdevs   Rusty Russell
• [PATCH 1/7] arm/imx6: add imx6q sabrelite board support   Shawn Guo
• [PATCH 0/7] arm/imx6: add imx6q sabrelite board and imx6q cpufreq support   Shawn Guo
• [PATCH 1/7] arm/imx6: add imx6q sabrelite board support   Richard Zhao
• [PATCH 0/7] arm/imx6: add imx6q sabrelite board and imx6q cpufreq support   Richard Zhao
• [PATCH 1/7] arm/imx6: add imx6q sabrelite board support   Shawn Guo
• [PATCH] ARM: MM: Configure the number of banks   Boojin Kim
• [PATCH 1/7] arm/imx6: add imx6q sabrelite board support   Richard Zhao
• [PATCH 7/8] OMAP4: clock: Add CPU local timer clock node.   Shilimkar, Santosh
• [PATCH 09/10] input: serio: ams-delta: Toggle keyboard power over GPIO   Dmitry Torokhov
• [PATCH 1/2] ARM: only look for TCM on ARM926 and later   Linus Walleij
• [PATCH 1/2] ARM: only look for TCM on ARM926 and later   Linus Walleij
• [PATCH] ARM: OMAP: mcbsp: Fix possible memory corruption   Jarkko Nikula
• [PATCH] ARM: OMAP: mcbsp: Fix possible memory corruption   Jarkko Nikula
• [PATCH 1/7] arm/imx6: add imx6q sabrelite board support   Shawn Guo
• [PATCH] ARM: OMAP: McSPI: Remove unused flag from struct omap2_mcspi_device_config   Jarkko Nikula
• [PATCH] irq: convert generic-chip to use irq_domain   Shawn Guo
• [RFC PATCH v1 6/7] media: video: introduce face detection driver module   Ming Lei
• [PATCH] irq: convert generic-chip to use irq_domain   Shawn Guo
• [PATCH 0/4] SMP TWD localtimer patches, broken apart   Linus Walleij
• [PATCH 1/4] ARM: smp_twd: modernize clock event registration   Linus Walleij
• [PATCH 2/4] ARM: smp_twd: create a percpu reference to the clockevent   Linus Walleij
• [PATCH 3/4] ARM: smp_twd: get the rate from a clock   Linus Walleij
• [PATCH 4/4] ARM: smp_twd: reconfigure clockevents after cpufreq change   Linus Walleij
• [GIT PULL] imx: gpio interrupt cleanup   Shawn Guo
• [PATCH 1/1] net/fec: add KSZ9021RN phy fixup   Richard Zhao
• [PATCH 1/7] arm/imx6: add imx6q sabrelite board support   Sascha Hauer
• [PATCH 1/7] arm/imx6: add imx6q sabrelite board support   Richard Zhao
• [PATCH] ARM: OMAP: mcbsp: Fix possible memory corruption   Igor Grinberg
• [PATCH 1/7] arm/imx6: add imx6q sabrelite board support   Sascha Hauer
• [PATCH 0/7] arm/imx6: add imx6q sabrelite board and imx6q cpufreq support   Richard Zhao
• [PATCH v5 5/9] ARM: versatile: Map local timers using Device Tree when possible   Pawel Moll
• [PATCH] ARM: OMAP3LOGIC: Adding DSS support   Tomi Valkeinen
• [PATCH v5 5/9] ARM: versatile: Map local timers using Device Tree when possible   Sergei Shtylyov
• Bad page state BUG triggered by init process (kernel 3.1.2)   Bruce Stenning
• [PATCH] ARM: OMAP: mcbsp: Fix possible memory corruption   Jarkko Nikula
• [PATCH 08/10] omapfb: lcd_ams_delta: Drive control lines over GPIO   Tomi Valkeinen
• [PATCH v4 0/5] ARM: davinci: re-arrange definitions to have a common davinci header   Nori, Sekhar
• [PATCH v5 5/9] ARM: versatile: Map local timers using Device Tree when possible   Pawel Moll
• [PATCH v4 0/2] Add support form eMMa-PrP in i.MX2 chips as a mem2mem device.   Javier Martin
• [PATCH v4 1/2] MEM2MEM: Add support for eMMa-PrP mem2mem operations.   Javier Martin
• [PATCH v4 2/2] MX2: Add platform definitions for eMMa-PrP device.   Javier Martin
• [PATCH v3 0/2] Refactor common Kconfigs for easier maintenance   Dave Martin
• [PATCH v3 1/2] ARM: pl2x0/pl310: Refactor Kconfig to be more maintainable   Dave Martin
• [PATCH v3 2/2] ARM: SMP: Refactor Kconfig to be more maintainable   Dave Martin
• [V1] mfd: Convert pm860x to use regmap api   Samuel Ortiz
• [V3 0/2] mfd 88pm860x bugfix and regmap   Samuel Ortiz
• [PATCH] ARM: OMAP: mcbsp: Fix possible memory corruption   Igor Grinberg
• [RFC PATCH v1 6/7] media: video: introduce face detection driver module   HeungJun, Kim
• [PATCH 1/3] pinctrl: Implement PINMUX_MAP_SYS_HOG   Linus Walleij
• [PATCH 6/7] arm/imx6q: add cpufreq support   Sascha Hauer
• [PATCH 2/4] rtc-s3c: make room for more variants in devicetree block   Heiko Stübner
• [PATCH 3/3] pinctrl: Don't create a device for each pin controller   Linus Walleij
• [PATCH 1/1] net/fec: add KSZ9021RN phy fixup   Fabio Estevam
• [PATCH] ARM: imx_v4_v5_defconfig: Select SMSC911X driver by default.   Fabio Estevam
• [PATCH 1/7] arm/imx6: add imx6q sabrelite board support   Rob Herring
• [PATCH 01/11] mm: page_alloc: handle MIGRATE_ISOLATE in free_pcppages_bulk()   Mel Gorman
• [PATCH 3/4] ARM: smp_twd: get the rate from a clock   Russell King - ARM Linux
• [PATCH 6/7] arm/imx6q: add cpufreq support   Richard Zhao
• [PATCH 2/4] ARM: smp_twd: create a percpu reference to the clockevent   Russell King - ARM Linux
• [PATCH 4/4] ARM: smp_twd: reconfigure clockevents after cpufreq change   Russell King - ARM Linux
• [PATCH 1/7] arm/imx6: add imx6q sabrelite board support   Richard Zhao
• [PATCH 1/1] net/fec: add KSZ9021RN phy fixup   Richard Zhao
• [PATCH v5 5/9] ARM: versatile: Map local timers using Device Tree when possible   Russell King - ARM Linux
• [PATCH v5 5/9] ARM: versatile: Map local timers using Device Tree when possible   Pawel Moll
• [PATCH 02/11] mm: compaction: introduce isolate_{free,migrate}pages_range().   Mel Gorman
• [PATCH v3 1/2] ARM: pl2x0/pl310: Refactor Kconfig to be more maintainable   Russell King - ARM Linux
• [PATCH v3 2/2] ARM: SMP: Refactor Kconfig to be more maintainable   Russell King - ARM Linux
• [PATCH 6/7] arm/imx6q: add cpufreq support   Russell King - ARM Linux
• [PATCH 6/7] arm/imx6q: add cpufreq support   Richard Zhao
• [PATCH] ARM: imx_v4_v5_defconfig: Select SMSC911X driver by default.   Sascha Hauer
• [PATCH 03/11] mm: mmzone: introduce zone_pfn_same_memmap()   Mel Gorman
• [PATCH] ARM: OMAP3LOGIC: Adding DSS support   Alex Gershgorin
• [PATCH 01/11] mm: page_alloc: handle MIGRATE_ISOLATE in free_pcppages_bulk()   Michal Nazarewicz
• [PATCH 6/7] arm/imx6q: add cpufreq support   Sascha Hauer
• [PATCH 04/11] mm: compaction: export some of the functions   Mel Gorman
• [PATCH 03/11] mm: mmzone: introduce zone_pfn_same_memmap()   Michal Nazarewicz
• [PATCH] [RFC] pinctrl: add a driver for Energy Micro's efm32 SoCs   Sascha Hauer
• [PATCH] ARM: OMAP2+: Fix: Don't wait for the idle status if modulemode is not supported   Benoit Cousson
• [PATCH 03/11] mm: mmzone: introduce zone_pfn_same_memmap()   Mel Gorman
• [PATCH 04/11] mm: compaction: export some of the functions   Michal Nazarewicz
• [PATCH 1/1] net/fec: add KSZ9021RN phy fixup   Veli-Pekka Peltola
• [PATCH 01/11] mm: page_alloc: handle MIGRATE_ISOLATE in free_pcppages_bulk()   Mel Gorman
• [PATCH v2 0/4] Implement RTC support for S3C2443/S3C2416/S3C2450   Heiko Stübner
• [PATCH 1/7] arm/imx6: add imx6q sabrelite board support   Shawn Guo
• [PATCH 1/4] ARM: SAMSUNG: cleanup of rtc register definitions   Heiko Stübner
• [PATCH 2/4] rtc-s3c: make room for more variants in devicetree block   Heiko Stübner
• [PATCH 3/4] rtc-s3c: add variants for S3C2443 and S3C2416   Heiko Stübner
• [PATCH 4/4] ARM: S3C2443/S3C2416: add s3c_rtc_setname and rename rtc devices   Heiko Stübner
• [PATCH 03/11] mm: mmzone: introduce zone_pfn_same_memmap()   Michal Nazarewicz
• [PATCH v3 1/2] ARM: pl2x0/pl310: Refactor Kconfig to be more maintainable   Dave Martin
• [PATCH v4 0/5] ARM: davinci: re-arrange definitions to have a common davinci header   Russell King - ARM Linux
• [PATCH v3 2/2] ARM: SMP: Refactor Kconfig to be more maintainable   Dave Martin
• [PATCH] ARM: pl2x0/pl310: Refactor Kconfig to be more maintainable   Dave Martin
• [PATCH v3 0/3] Add device tree support for mc13892 regulator driver   Shawn Guo
• [PATCH v3 1/3] mfd: mc13xxx: add device tree probe support   Shawn Guo
• [PATCH v3 2/3] regulator: mc13892: add device tree probe support   Shawn Guo
• [PATCH v3 3/3] arm/imx: add mc13892 support into imx51-babbage.dts   Shawn Guo
• [PATCH v3 1/2] ARM: pl2x0/pl310: Refactor Kconfig to be more maintainable   Dave Martin
• [PATCH 02/11] mm: compaction: introduce isolate_{free,migrate}pages_range().   Michal Nazarewicz
• [PATCH] [RFC] pinctrl: add a driver for Energy Micro's efm32 SoCs   Uwe Kleine-König
• [PATCH] ARM: pl2x0/pl310: Refactor Kconfig to be more maintainable   Rob Herring
• [PATCH 0/5] mmc: mmci: Improvements and bugfixes for SDIO   Ulf Hansson
• [PATCH 1/5] mmc: mmci: Prepare for SDIO before setting up DMA job   Ulf Hansson
• [PATCH 2/5] mmc: mmci: Fix incorrect handling of HW flow control for SDIO   Ulf Hansson
• [PATCH 3/5] mmc: mmci: Add constraints on alignment for SDIO   Ulf Hansson
• [PATCH 4/5] mmc: mmci: Fix PIO read for small SDIO packets   Ulf Hansson
• [PATCH 5/5] mmc: mmci: Support any block sizes for ux500v2 variant   Ulf Hansson
• [PATCH] ARM: imx_v4_v5_defconfig: Select SMSC911X driver by default.   Arnd Bergmann
• [PATCH 04/11] mm: compaction: export some of the functions   Mel Gorman
• [PATCH 04/11] mm: compaction: export some of the functions   Michal Nazarewicz
• [PATCH 0/2] ARM: Exynos: Adapt to generic power domain   Thomas Abraham
• [PATCH 1/2] PM / Domains: Add OF support   Thomas Abraham
• [PATCH 2/2] ARM: Exynos: Hook up power domains to generic power domain infrastructure   Thomas Abraham
• [PATCH] ARM: pl2x0/pl310: Refactor Kconfig to be more maintainable   Uwe Kleine-König
• [PATCH 03/11] mm: mmzone: introduce zone_pfn_same_memmap()   Mel Gorman
• [PATCH v3 2/2] ARM: SMP: Refactor Kconfig to be more maintainable   Russell King - ARM Linux
• [RESEND][PATCH] ARM: Exynos: Add irq domain and device tree support for interrupt combiner   Thomas Abraham
• [PATCH v3 1/2] ARM: pl2x0/pl310: Refactor Kconfig to be more maintainable   Russell King - ARM Linux
• [PATCH v5 0/6] PM QoS: implement the OMAP low level constraints management code   jean.pihet at newoldbits.com
• [PATCH 1/6] OMAP2+: powerdomain: control power domains next state   jean.pihet at newoldbits.com
• [PATCH 2/6] OMAP2+: omap_hwmod: manage the wake-up latency constraints   jean.pihet at newoldbits.com
• [PATCH 3/6] OMAP: PM: register to the per-device PM QoS framework   jean.pihet at newoldbits.com
• [PATCH 4/6] OMAP3: cpuidle: next C-state decision depends on the PM QoS MPU and CORE constraints   jean.pihet at newoldbits.com
• [PATCH 5/6] OMAP3: update cpuidle latency and threshold figures   jean.pihet at newoldbits.com
• [PATCH 6/6] OMAP3: powerdomain data: add wake-up latency figures   jean.pihet at newoldbits.com
• [PATCH 04/11] mm: compaction: export some of the functions   Arnd Bergmann
• [PATCH 02/11] mm: compaction: introduce isolate_{free,migrate}pages_range().   Mel Gorman
• [PATCH v3 2/2] ARM: SMP: Refactor Kconfig to be more maintainable   Dave Martin
• linux-next: please update URL for arm-soc tree   Olof Johansson
• [PATCH 02/11] mm: compaction: introduce isolate_{free,migrate}pages_range().   Michal Nazarewicz
• [Linaro-mm-sig] [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Arnd Bergmann
• [PATCH v3 1/2] ARM: pl2x0/pl310: Refactor Kconfig to be more maintainable   Dave Martin
• [PATCH v4] ARM: sched_clock: allow sched_clock to be selected at runtime   Marc Zyngier
• [PATCH V3] mfd: Fixed unconditional reset of the ADC reading enable bits   Uwe Kleine-König
• [PATCH V2] mfd: Fixed mixed up ADC single channel readout   Uwe Kleine-König
• [PATCH V3] mfd: Fixed unconditional reset of the ADC reading enable bits   Samuel Ortiz
• [PATCH V2] mfd: Fixed mixed up ADC single channel readout   Samuel Ortiz
• [PATCH 02/11] mm: compaction: introduce isolate_{free,migrate}pages_range().   Mel Gorman
• [PATCH 1/2] ARM: sa11x0: Implement autoloading of codec and codec pdata for mcp bus.   Samuel Ortiz
• [PATCH v3] mfd: mc13xxx: add device tree probe support   Samuel Ortiz
• [PATCH v2 3/4] regulator: mc13892: add device tree probe support   Samuel Ortiz
• [PATCH 01/10] GPIO: gpio-generic: Move initialization up to postcore   Tony Lindgren
• [RFC 1/3] pinctrl: add a driver for NVIDIA Tegra   Stephen Warren
• [PATCHv11 0/8] OMAP3+: PRCM chain handler   Tero Kristo
• [PATCHv11 1/8] ARM: OMAP2+: hwmod: Add API to enable IO ring wakeup.   Tero Kristo
• [PATCHv11 2/8] ARM: OMAP2+: hwmod: Add API to check IO PAD wakeup status   Tero Kristo
• [PATCHv11 3/8] ARM: OMAP: prm: add support for chain interrupt handler   Tero Kristo
• [PATCHv11 4/8] ARM: OMAP: prcm: add suspend prepare / finish support   Tero Kristo
• [PATCHv11 5/8] ARM: OMAP2+: mux: add support for PAD wakeup interrupts   Tero Kristo
• [PATCHv11 6/8] ARM: OMAP3: pm: use prcm chain handler   Tero Kristo
• [PATCHv11 7/8] ARM: OMAP3: pm: do not enable PRCM MPU interrupts manually   Tero Kristo
• [PATCHv11 8/8] ARM: OMAP: mux: add support for selecting mpu_irq for each wakeup pad   Tero Kristo
• [PATCH v4] tty: serial: imx: Allow UART to be a source for wakeup   Fabio Estevam
• [PATCH RESEND v5 0/3] Add support for TI814X processor series   Tony Lindgren
• [GIT PULL] kexec and soft-reboot for 3.3   Will Deacon
• [PATCH] ARM: OMAP: mcbsp: Fix possible memory corruption   Tony Lindgren
• [GIT PULL] ux500 patches for 3.3   Linus Walleij
• [PATCH] omap: rx51: initialize isp1704 properly   Tony Lindgren
• [PATCH] ARM: remove header files included more than once   Ramirez Luna, Omar
• [PATCH 1/7] arm/imx6: add imx6q sabrelite board support   Troy Kisky
• [PATCH 1/2] MTD: atmel_nand: Update Kconfig to support PMECC   Artem Bityutskiy
• [PATCH v3 4/5] clk: basic gateable and fixed-rate clks   Turquette, Mike
• arm and patch phys offset   Michael Walle
• arm and patch phys offset   Russell King - ARM Linux
• arm and patch phys offset   Nicolas Pitre
• [PATCH v3 4/5] clk: basic gateable and fixed-rate clks   Andrew Lunn
• [PATCH 0/5] Misc picoxcell features for 3.3   Jamie Iles
• [PATCH 1/5] ARM: picoxcell: remove mach/memory.h   Jamie Iles
• [PATCH 2/5] ARM: picoxcell: don't reserve irq_descs   Jamie Iles
• [PATCH 3/5] ARM: picoxcell: move io mappings to common.c   Jamie Iles
• [PATCH 4/5] MAINTAINERS: add maintainer entry for Picochip picoxcell   Jamie Iles
• [PATCH 5/5] ARM: picoxcell: implement watchdog restart   Jamie Iles
• arm and patch phys offset   Michael Walle
• [RFC PATCH v1 6/7] media: video: introduce face detection driver module   Sylwester Nawrocki
• arm and patch phys offset   Russell King - ARM Linux
• arm and patch phys offset   Russell King - ARM Linux
• arm and patch phys offset   Michael Walle
• arm and patch phys offset   Michael Walle
• [PATCH] pxa/hx4700: Fix PXA_GPIO_IRQ_BASE/IRQ_NUM values   Paul Parsons
• arm and patch phys offset   Russell King - ARM Linux
• [PATCH v3 1/2] ARM: pl2x0/pl310: Refactor Kconfig to be more maintainable   Russell King - ARM Linux
• arm and patch phys offset   Nicolas Pitre
• [PATCH v2] spi: QUP based bus driver for Qualcomm MSM chipsets   Harini Jayaraman
• [PATCH 4/5] MAINTAINERS: add maintainer entry for Picochip picoxcell   Joe Perches
• [GIT PULL] omap hsmmc platform code changes for v3.3 merge window   Tony Lindgren
• [PATCH v2] spi: QUP based bus driver for Qualcomm MSM chipsets   David Brown
• [PATCH 2/5] ARM: picoxcell: don't reserve irq_descs   Rob Herring
• [Linaro-mm-sig] [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Robert Morell
• [GIT PULL] Two non-critical DMA fixes for v3.3 merge window   Tony Lindgren
• linux-next: please update URL for arm-soc tree   Stephen Rothwell
• arm and patch phys offset   Nicolas Pitre
• [PATCH 2/5] ARM: picoxcell: don't reserve irq_descs   Jamie Iles
• [PATCH 4/5] MAINTAINERS: add maintainer entry for Picochip picoxcell   Jamie Iles
• [PATCH 01/10] GPIO: gpio-generic: Move initialization up to postcore   Janusz Krzysztofik
• [PATCH 1/2] ARM: OMAP: dmtimer: fix sleeping function called from invalid context   Tony Lindgren
• [PATCH 01/10] GPIO: gpio-generic: Move initialization up to postcore   Tony Lindgren
• [PATCH] ARM: OMAP: McSPI: Remove unused flag from struct omap2_mcspi_device_config   Tony Lindgren
• [PATCH 01/10] GPIO: gpio-generic: Move initialization up to postcore   Janusz Krzysztofik
• [PATCH 01/10] GPIO: gpio-generic: Move initialization up to postcore   Tony Lindgren
• [RFC] virtio: use mandatory barriers for remote processor vdevs   Amos Kong
• arm and patch phys offset   Michael Walle
• [PATCH 01/10] GPIO: gpio-generic: Move initialization up to postcore   Janusz Krzysztofik
• [PATCHv11 5/8] ARM: OMAP2+: mux: add support for PAD wakeup interrupts   Tony Lindgren
• [PATCHv11 8/8] ARM: OMAP: mux: add support for selecting mpu_irq for each wakeup pad   Tony Lindgren
• [RFC 1/3] pinctrl: add a driver for NVIDIA Tegra   Linus Walleij
• [PATCHv11 3/8] ARM: OMAP: prm: add support for chain interrupt handler   Tony Lindgren
• [PATCHv11 2/8] ARM: OMAP2+: hwmod: Add API to check IO PAD wakeup status   Tony Lindgren
• [PATCHv11 0/8] OMAP3+: PRCM chain handler   Kevin Hilman
• [PATCH] [RFC] pinctrl: add a driver for Energy Micro's efm32 SoCs   Linus Walleij
• [PATCH v4] ARM: sched_clock: allow sched_clock to be selected at runtime   Tony Lindgren
• [PATCH v4] ARM: sched_clock: allow sched_clock to be selected at runtime   Tony Lindgren
• [PATCH 1/7] arm/imx6: add imx6q sabrelite board support   Richard Zhao
• [PATCH 1/7] arm/imx6: add imx6q sabrelite board support   Richard Zhao
• [PATCH 1/2] MTD: atmel_nand: Update Kconfig to support PMECC   Hong Xu
• [PATCH 1/7] arm/imx6: add imx6q sabrelite board support   Shawn Guo
• [PATCH 1/7] arm/imx6: add imx6q sabrelite board support   Richard Zhao
• [PATCH v4] ARM: sched_clock: allow sched_clock to be selected at runtime   Kyungmin Park
• [PATCH 7/7] arm/imx6q: register arm_clk to clkdev   Richard Zhao
• [PATCH 7/7] arm/imx6q: register arm_clk to clkdev   Shawn Guo
• [PATCH 1/2] ARM: OMAP: dmtimer: fix sleeping function called from invalid context   Ramirez Luna, Omar
• [PATCH 1/2] MTD: atmel_nand: Update Kconfig to support PMECC   Hong Xu
• [PATCH 1/1] net/fec: add KSZ9021RN phy fixup   Richard Zhao
• [PATCH 1/1] net/fec: add KSZ9021RN phy fixup   Jason Liu
• [PATCH 1/1] net/fec: add KSZ9021RN phy fixup   Shawn Guo
• [RFC PATCH v1 1/7] omap4: introduce fdif(face detect module) hwmod   Ming Lei
• [PATCH 1/1] net/fec: add KSZ9021RN phy fixup   Shawn Guo
• [PATCH v4] tty: serial: imx: Allow UART to be a source for wakeup   Shawn Guo
• [PATCH v5] tty: serial: imx: Allow UART to be a source for wakeup   Fabio Estevam
• arm and patch phys offset   Nicolas Pitre
• [RFC PATCH v1 6/7] media: video: introduce face detection driver module   Ming Lei
• [PATCH 3/4] ARM: smp_twd: get the rate from a clock   Santosh Shilimkar
• [RFC PATCH v1 6/7] media: video: introduce face detection driver module   HeungJun, Kim
• [PATCH V2 0/7] imx: add imx6 sabrelite board   Richard Zhao
• [PATCH V2 1/7] dts/imx: rename gpio labels to consistent with hw spec   Richard Zhao
• [PATCH V2 2/7] arm/imx6: add imx6q sabrelite board support   Richard Zhao
• [PATCH V2 3/7] arm/imx: cpufreq: add multi-core support   Richard Zhao
• [PATCH V2 4/7] arm/imx: fix cpufreq section mismatch   Richard Zhao
• [PATCH V2 5/7] arm/imx: add cpu_voltage to cpu_op   Richard Zhao
• [PATCH V2 6/7] arm/imx6q: register arm_clk as cpu_clk to clkdev   Richard Zhao
• [PATCH V2 7/7] arm/imx6q: add cpufreq support   Richard Zhao
• [RFC PATCH v1 6/7] media: video: introduce face detection driver module   Ming Lei
• [PATCH 01/19] mxc_udc: add workaround for ENGcm09152 for i.MX25   Eric Bénard
• [PATCH 02/19] eukrea_cpuimx25: enable workaround ENGcm09152   Eric Bénard
• [PATCH 03/19] cpuimx25sd: fix Kconfig   Eric Bénard
• [PATCH 04/19] mbimxsd25: add spi controler and spidev support   Eric Bénard
• [PATCH 05/19] cpuimx25: add watchdog support   Eric Bénard
• [PATCH 06/19] mx27vis-aic32x4: only register when running on the right machine   Eric Bénard
• [PATCH 07/19] imx_v4_v5_defconfig: update default configuration   Eric Bénard
• [PATCH 08/19] dma: MX3_IPU fix depends   Eric Bénard
• [PATCH 09/19] clock-imx35: fix reboot in internal boot mode   Eric Bénard
• [PATCH 10/19] wm1133-ev1: only register when running on the right machine   Eric Bénard
• [PATCH 11/19] cpuimx35sd: fix Kconfig   Eric Bénard
• [PATCH 12/19] cpuimx35: fix touchscreen support   Eric Bénard
• [PATCH 13/19] enable uncompress log on cpuimx35sd   Eric Bénard
• [PATCH 14/19] mbimxsd35: add spi controler and spidev support   Eric Bénard
• [PATCH 15/19] mx3_defconfig: update default configuration   Eric Bénard
• [PATCH 16/19] eukrea-cpuimx51: remove board   Eric Bénard
• [PATCH 17/19] cpuimx51sd: add watchdog support   Eric Bénard
• [PATCH 18/19] mbimx51sd: add audio codec support   Eric Bénard
• [PATCH 19/19] eukrea-cpuimx51sd: support rev2 PCB   Eric Bénard
• [PATCH 06/19] mx27vis-aic32x4: only register when running on the right machine   Mark Brown
• [PATCH] DMA: PL330: Support MEMTOMEM transmit without barrier operation.   Boojin Kim
• [PATCH] iommu: Initialize domain->handler in iommu_domain_alloc()   KyongHo Cho
• [PATCH v2] ARM: OMAP3LOGIC: Adding DSS support   Alex
• [PATCH 3/4] ARM: smp_twd: get the rate from a clock   Russell King - ARM Linux
• [PATCH 1/1] arm/imx6q-sabrelite: add enet phy ksz9021rn fixup   Richard Zhao
• [PATCH 1/1] net/fec: add KSZ9021RN phy fixup   Richard Zhao
• [PATCH 3/4] ARM: smp_twd: get the rate from a clock   Shilimkar, Santosh
• [PATCH] dmaengine/dw_dmac: Add support for device_prep_dma_sg   Pratyush Anand
• [PATCH v3] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit   Lauri Hintsala
• [PATCH 2/4] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller   Rajendra Nayak
• [PATCH v4 0/5] ARM: davinci: re-arrange definitions to have a common davinci header   Hadli, Manjunath
• [PATCH V2 0/2] pinctrl: support PXA series   Haojian Zhuang
• [PATCH V2 1/2] pinctrl: enable pinmux for pxa series   Haojian Zhuang
• [PATCH V2 2/2] ARM: mmp: enable pinmux in platform driver   Haojian Zhuang
• [PATCH V2 1/7] dts/imx: rename gpio labels to consistent with hw spec   Shawn Guo
• [PATCH 09/19] clock-imx35: fix reboot in internal boot modeg   Sascha Hauer
• [GIT PULL] pxa changes for v3.3   Haojian Zhuang
• [PATCH 16/19] eukrea-cpuimx51: remove board   Sascha Hauer
• [PATCH 16/19] eukrea-cpuimx51: remove board   Eric Bénard
• [PATCH 03/19] cpuimx25sd: fix Kconfig   Wolfram Sang
• [PATCH 01/19] mxc_udc: add workaround for ENGcm09152 for i.MX25   Sascha Hauer
• [PATCH 01/19] mxc_udc: add workaround for ENGcm09152 for i.MX25   Wolfram Sang
• [PATCH v2 0/3] Device tree support for TWL regulators   Rajendra Nayak
• [PATCH v2 1/3] regulator: twl: adapt twl-regulator driver to dt   Rajendra Nayak
• [PATCH v2 2/3] ARM: omap4-sdp: Pass regulator data from dt   Rajendra Nayak
• [PATCH v2 3/3] omap4: panda: Pass regulator data from dt   Rajendra Nayak
• [PATCH V2 7/7] arm/imx6q: add cpufreq support   Sascha Hauer
• [PATCH V2 7/7] arm/imx6q: add cpufreq support   Richard Zhao
• [PATCH V2 1/7] dts/imx: rename gpio labels to consistent with hw spec   Richard Zhao
• [PATCH] ARM: pl2x0/pl310: Refactor Kconfig to be more maintainable   Dave Martin
• [PATCH 09/19] clock-imx35: fix reboot in internal boot mode   Sergei Shtylyov
• [PATCH 08/19] dma: MX3_IPU fix depends   Sergei Shtylyov
• [PATCHv8 0/5] I2C driver updates   Shubhrajyoti D
• [PATCHv8 1/5] OMAP3+: HWMOD: Add the default clockactivity for I2C   Shubhrajyoti D
• [PATCHv8 2/5] OMAP: hwmod/device : add omap_device_reset to reset all the hwmods in the device   Shubhrajyoti D
• [PATCHv8 3/5] OMAP: I2C: Reset support   Shubhrajyoti D
• [PATCHv8 4/5] OMAP: I2C: Remove the reset in the init path   Shubhrajyoti D
• [PATCHv8 5/5] OMAP: I2C: Remove the SYSC register definition   Shubhrajyoti D
• [PATCH v6 04/10] arm/tegra: prepare early init for multiple tegra variants   Peter De Schrijver
• [PATCH v6 03/10] arm/tegra: prepare clock code for multiple tegra variants   Peter De Schrijver
• [PATCH v5 00/11]ARM: davinci:add support for dm644x vpbe display driver   Manjunath Hadli
• [PATCH v5 01/11] davinci: vpif: remove obsolete header file inclusion   Manjunath Hadli
• [PATCH v5 02/11] ARM: davinci: dm644x: remove the macros from the header to move to c file   Manjunath Hadli
• [PATCH v5 03/11] ARM: davinci: dm365: remove the macros from the header to move to c file   Manjunath Hadli
• [PATCH v5 04/11] ARM: davinci: dm646x: remove the macros from the header to move to c file   Manjunath Hadli
• [PATCH v5 05/11] ARM: davinci: create new common platform header for davinci   Manjunath Hadli
• [PATCH v5 06/11] davinci: eliminate use of IO_ADDRESS() on sysmod   Manjunath Hadli
• [PATCH v5 07/11] davinci: dm644x: Replace register base value with a defined macro   Manjunath Hadli
• [PATCH v5 08/11] davinci: dm644x: change vpfe capture structure variables for consistency   Manjunath Hadli
• [PATCH v5 09/11] davinci: dm644x: move vpfe init from soc to board specific files   Manjunath Hadli
• [PATCH v5 10/11] davinci: dm644x: add support for v4l2 video display   Manjunath Hadli
• [PATCH v5 11/11] davinci: dm644x EVM: add support for VPBE display   Manjunath Hadli
• [PATCH 3/4 v2] ARM: smp_twd: get the rate from a clock   Linus Walleij
• [PATCH 2/4] ARM: smp_twd: create a percpu reference to the clockevent   Linus Walleij
• [PATCH 4/4 v2] ARM: smp_twd: reconfigure clockevents after cpufreq change   Linus Walleij
• [PATCH] dmaengine/dw_dmac: Add support for device_prep_dma_sg   Linus Walleij
• [PATCH V2 2/7] arm/imx6: add imx6q sabrelite board support   Shawn Guo
• [PATCH 1/1] arm/imx6q-sabrelite: add enet phy ksz9021rn fixup   Shawn Guo
• [PATCH 1/1] arm/imx6q-sabrelite: add enet phy ksz9021rn fixup   Richard Zhao
• [PATCH V2 7/7] arm/imx6q: add cpufreq support   Shawn Guo
• Bad page state BUG triggered by init process (kernel 3.1.2)   Bruce Stenning
• [PATCH 04/19] mbimxsd25: add spi controler and spidev support   Fabio Estevam
• [PATCH 1/1] arm/imx6q-sabrelite: add enet phy ksz9021rn fixup   Shawn Guo
• [PATCH 08/19] dma: MX3_IPU fix depends   Fabio Estevam
• [PATCH V2 2/7] arm/imx6: add imx6q sabrelite board support   Richard Zhao
• [PATCH v8 00/20] OMAP2+: UART: Runtime adaptation + cleanup   Govindraj
• [PATCH 08/19] dma: MX3_IPU fix depends   Eric Bénard
• [PATCH v4] ARM: sched_clock: allow sched_clock to be selected at runtime   Krzysztof Halasa
• [PATCH 1/3] ARM: OMAP2+: kconfig: Enable devicetree by default for OMAP2+ systems   Tomi Valkeinen
• [Linaro-mm-sig] [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Hans Verkuil
• [PATCH V2 2/7] arm/imx6: add imx6q sabrelite board support   Shawn Guo
• [PATCH 1/3] ARM: OMAP2+: kconfig: Enable devicetree by default for OMAP2+ systems   Cousson, Benoit
• [PATCH 09/19] clock-imx35: fix reboot in internal boot mode   Eric Bénard
• [PATCH 09/19] clock-imx35: fix reboot in internal boot modeg   Eric Bénard
• [PATCH v2 01/19] mxc_udc: add workaround for ENGcm09152 for i.MX25   Eric Bénard
• [PATCH v2 08/19] dma: MX3_IPU fix depends   Eric Bénard
• [PATCH v2 09/19] clock-imx35: fix reboot in internal boot mode   Eric Bénard
• [PATCH v8 00/20] OMAP2+: UART: Runtime adaptation + cleanup   Rajendra Nayak
• [PATCH v2 01/19] mxc_udc: add workaround for ENGcm09152 for i.MX25   Felipe Balbi
• [PATCH V2 7/7] arm/imx6q: add cpufreq support   Sascha Hauer
• [PATCHv2 0/7]ARM: OMAP3PLUS PM: Add IO DaisyChain support via hwmod mux   Vishwanath Sripathy
• [PATCH v2] arm/imx6q: Rename Sabreauto to Armadillo2   Dirk Behme
• [PATCH v2] arm/imx6q: Rename Sabreauto to Armadillo2   Shawn Guo
• [PATCH V2 7/7] arm/imx6q: add cpufreq support   Richard Zhao
• [Linaro-mm-sig] [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Arnd Bergmann
• [PATCH 0/4] Fix the left DMA_NONE from dma_transfer_direction migration   Shawn Guo
• [PATCH 1/4] dmaengine: add DMA_TRANS_NONE to dma_transfer_direction   Shawn Guo
• [PATCH 2/4] mmc: mxs-mmc: fix the dma_transfer_direction migration   Shawn Guo
• [PATCH 3/4] mtd: fix compile error for gpmi-nand   Shawn Guo
• [PATCH 4/4] mtd: gpmi-nand: move to dma_transfer_direction   Shawn Guo
• [PATCH 00/14] mmc: mmci: Improved PM support, cleanup and bugfixes   Ulf Hansson
• [PATCH V2 1/2] pinctrl: enable pinmux for pxa series   Arnd Bergmann
• [PATCH 0/5] mmc: mmci: Improvements and bugfixes for SDIO   Ulf Hansson
• [PATCH] mmc: mmci: Fixup handling of MCI_STARTBITERR   Chris Ball
• [PATCH 1/1] mmc: sdhci-esdhc: Change delay after setting clock from 100ms to 1ms   Chris Ball
• [PATCH v8 00/20] OMAP2+: UART: Runtime adaptation + cleanup   Kevin Hilman
• [PATCH v4 0/5] Refactor common Kconfigs for easier maintenance   Dave Martin
• [PATCH v4 1/5] ARM: l2x0/pl310: Refactor Kconfig to be more maintainable   Dave Martin
• [PATCH v4 2/5] ARM: SMP: Refactor Kconfig to be more maintainable   Dave Martin
• [PATCH v4 3/5] omap4: Unconditionally require l2x0 L2 cache controller support   Dave Martin
• [PATCH v4 4/5] highbank: Unconditionally require l2x0 L2 cache controller support   Dave Martin
• [PATCH v4 5/5] imx6q: Remove unconditional dependency on l2x0 L2 cache support   Dave Martin
• [PATCH] gpio: pl061: drop extra check for NULL platform_data   Grant Likely
• [RFC PATCH] ARM: vmlinux.lds.S: do not hardcode cacheline size as 32 bytes   Will Deacon
• [PATCH V2 1/2] pinctrl: enable pinmux for pxa series   Stephen Warren
• [PATCH] arm,davinci: configure davinci aemif chipselects through OF   Nori, Sekhar
• [PATCH v4] ARM: sched_clock: allow sched_clock to be selected at runtime   Marc Zyngier
• [PATCH V2 7/7] arm/imx6q: add cpufreq support   Rob Lee
• [PATCH v8 00/20] OMAP2+: UART: Runtime adaptation + cleanup   Kevin Hilman
• [PATCHv2 0/7]ARM: OMAP3PLUS PM: Add IO DaisyChain support via hwmod mux   Kevin Hilman
• [Kgdb-bugreport] Anyone used KDB single-stepping on ARM   Jason Wessel
• [PATCH] omap: rx51: initialize isp1704 properly   Sebastian Reichel
• [PATCH] omap: rx51: initialize isp1704 properly   Felipe Contreras
• [PATCH v4 2/5] ARM: SMP: Refactor Kconfig to be more maintainable   David Brown
• [PATCH v9 00/31] gpio/omap: driver cleanup and fixes   Tarun Kanti DebBarma
• [PATCH v9 01/31] gpio/omap: remove dependency on gpio_bank_count   Tarun Kanti DebBarma
• [PATCH v9 02/31] gpio/omap: use flag to identify wakeup domain   Tarun Kanti DebBarma
• [PATCH v9 03/31] gpio/omap: make gpio_context part of gpio_bank structure   Tarun Kanti DebBarma
• [PATCH v9 04/31] gpio/omap: handle save/restore context in GPIO driver   Tarun Kanti DebBarma
• [PATCH v9 05/31] gpio/omap: make non-wakeup GPIO part of pdata   Tarun Kanti DebBarma
• [PATCH v9 06/31] gpio/omap: avoid cpu checks during module ena/disable   Tarun Kanti DebBarma
• [PATCH v9 07/31] gpio/omap: further cleanup using wkup_en register   Tarun Kanti DebBarma
• [PATCH v9 08/31] gpio/omap: use level/edge detect reg offsets   Tarun Kanti DebBarma
• [PATCH v9 09/31] gpio/omap: remove hardcoded offsets in context save/restore   Tarun Kanti DebBarma
• [PATCH v9 10/31] gpio/omap: cleanup set_gpio_triggering function   Tarun Kanti DebBarma
• [PATCH v9 11/31] gpio/omap: cleanup omap_gpio_mod_init function   Tarun Kanti DebBarma
• [PATCH v9 12/31] gpio/omap: use pinctrl offset instead of macro   Tarun Kanti DebBarma
• [PATCH v9 13/31] gpio/omap: remove unnecessary bit-masking for read access   Tarun Kanti DebBarma
• [PATCH v9 14/31] gpio/omap: remove bank->method & METHOD_* macros   Tarun Kanti DebBarma
• [PATCH v9 15/31] gpio/omap: fix bankwidth for OMAP7xx MPUIO   Tarun Kanti DebBarma
• [PATCH v9 16/31] gpio/omap: use pm-runtime framework   Tarun Kanti DebBarma
• [PATCH v9 17/31] gpio/omap: optimize suspend and resume functions   Tarun Kanti DebBarma
• [PATCH v9 18/31] gpio/omap: cleanup prepare_for_idle and resume_after_idle   Tarun Kanti DebBarma
• [PATCH v9 19/31] gpio/omap: fix debounce clock handling   Tarun Kanti DebBarma
• [PATCH v9 20/31] gpio/omap: fix incorrect access of debounce module   Tarun Kanti DebBarma
• [PATCH v9 21/31] gpio/omap: remove omap_gpio_save_context overhead   Tarun Kanti DebBarma
• [PATCH v9 22/31] gpio/omap: save and restore debounce registers   Tarun Kanti DebBarma
• [PATCH v9 23/31] gpio/omap: enable irq at the end of all configuration in restore   Tarun Kanti DebBarma
• [PATCH v9 24/31] gpio/omap: restore OE only after setting the output level   Tarun Kanti DebBarma
• [PATCH v9 25/31] gpio/omap: handle set_dataout reg capable IP on restore   Tarun Kanti DebBarma
• [PATCH v3 resend2] s3c/s3c24xx: arm: leds: Make s3c24xx LEDS driver use gpiolib   Denis Kuzmenko
• [PATCH] ARM: add device tree blobs to .gitignore   Uwe Kleine-König
• [PATCHv11 1/8] ARM: OMAP2+: hwmod: Add API to enable IO ring wakeup.   Paul Walmsley
• [PATCHv11 1/8] ARM: OMAP2+: hwmod: Add API to enable IO ring wakeup.   Paul Walmsley
• [PATCHv2 resend] Fix compilation error when CONFIG_CPU_FREQ_S3C24XX_DEBUGFS selected.   Denis Kuzmenko
• [PATCH v3 resend2] s3c/s3c24xx: arm: leds: Make s3c24xx LEDS driver use gpiolib   Joe Perches
• [PATCH v4] ARM: sched_clock: allow sched_clock to be selected at runtime   Russell King - ARM Linux
• Git pull request: update to the Marvell Orion SOC family   Nicolas Pitre
• [PATCH v3 resend2] s3c/s3c24xx: arm: leds: Make s3c24xx LEDS driver use gpiolib   Denis Kuzmenko
• [PATCH v3 resend2] s3c/s3c24xx: arm: leds: Make s3c24xx LEDS driver use gpiolib   Joe Perches
• [PATCH v3 resend2] s3c/s3c24xx: arm: leds: Make s3c24xx LEDS driver use gpiolib   Denis Kuzmenko
• [PATCHv11 1/8] ARM: OMAP2+: hwmod: Add API to enable IO ring wakeup.   Paul Walmsley
• [PATCH v3 resend2] s3c/s3c24xx: arm: leds: Make s3c24xx LEDS driver use gpiolib   Joe Perches
• [PATCH] omap: rx51: initialize isp1704 properly   Tony Lindgren
• [Kgdb-bugreport] Anyone used KDB single-stepping on ARM   Tim Bird
• [PATCH v3 resend2] s3c/s3c24xx: arm: leds: Make s3c24xx LEDS driver use gpiolib   Denis Kuzmenko
• [PATCHv11 2/8] ARM: OMAP2+: hwmod: Add API to check IO PAD wakeup status   Paul Walmsley
• [PATCH v3 resend2] s3c/s3c24xx: arm: leds: Make s3c24xx LEDS driver use gpiolib   Joe Perches
• [PATCHv11 2/8] ARM: OMAP2+: hwmod: Add API to check IO PAD wakeup status   Tony Lindgren
• Git pull request: update to the Marvell Orion SOC family   Olof Johansson
• [PATCHv11 2/8] ARM: OMAP2+: hwmod: Add API to check IO PAD wakeup status   Paul Walmsley
• [PATCH 1/3] ARM: OMAP2+: kconfig: Enable devicetree by default for OMAP2+ systems   Tony Lindgren
• [GIT PULL] omap hsmmc platform code changes for v3.3 merge window   Olof Johansson
• [GIT PULL] ux500 patches for 3.3   Olof Johansson
• [GIT PULL] Two non-critical DMA fixes for v3.3 merge window   Olof Johansson
• [PULL] Calxeda Highbank for 3.3   Rob Herring
• Git pull request: update to the Marvell Orion SOC family   Nicolas Pitre
• [PATCHv11 2/8] ARM: OMAP2+: hwmod: Add API to check IO PAD wakeup status   Tony Lindgren
• [PATCH V2 1/2] pinctrl: enable pinmux for pxa series   Linus Walleij
• [PATCH V2 2/2] ARM: mmp: enable pinmux in platform driver   Linus Walleij
• [PULL] Calxeda Highbank for 3.3   Olof Johansson
• [PATCH V2 2/2] ARM: mmp: enable pinmux in platform driver   Stephen Warren
• arm and patch phys offset   Michael Walle
• [PATCH] ARM: fix $(CROSS_COMPILE) prefix missing from size invocation   Janusz Krzysztofik
• [PATCH v8 00/20] OMAP2+: UART: Runtime adaptation + cleanup   Kevin Hilman
• [PATCH v4] s3c/s3c24xx: arm: leds: Make s3c24xx LEDS driver use gpiolib. Fix error disabling pull during probe.   Denis Kuzmenko
• [PATCH 2/6] OMAP2+: omap_hwmod: manage the wake-up latency constraints   Kevin Hilman
• [PATCH 4/6] OMAP3: cpuidle: next C-state decision depends on the PM QoS MPU and CORE constraints   Kevin Hilman
• Git pull request: update to the Marvell Orion SOC family   Nicolas Pitre
• [PATCH v5 0/6] PM QoS: implement the OMAP low level constraints management code   Kevin Hilman
• [patch] ARM: smpboot: Enable interrupts after marking CPU online/active   Dima Zavin
• [patch] ARM: smpboot: Enable interrupts after marking CPU online/active   Thomas Gleixner
• [PATCH v5] tty: serial: imx: Allow UART to be a source for wakeup   Richard Zhao
• [PATCH V2 4/7] arm/imx: fix cpufreq section mismatch   Richard Zhao
• [PATCH v2 02/10] i2c: OMAP: Add DT support for i2c controller   Kevin Hilman
• [PATCH v3] arm: omap3evm: Add support for an MT9M032 based camera board.   Martin Hostettler
• [PATCH V3 0/4] add imx6q sabrelite board support   Richard Zhao
• [PATCH V3 1/4] dts/imx: rename gpio labels to consistent with hw spec   Richard Zhao
• [PATCH V3 2/4] dts/imx: rename uart labels to consistent with hw spec   Richard Zhao
• [PATCH V3 3/4] arm/imx6: add imx6q sabrelite board support   Richard Zhao
• [PATCH V3 4/4] arm/imx6q-sabrelite: add enet phy ksz9021rn fixup   Richard Zhao
• [PATCH V2 7/7] arm/imx6q: add cpufreq support   Richard Zhao
• [RESEND PATCH] ARM: SAMSUNG: Add s3c_setparent_clksrc in s3c_set_clksrc   jhbird.choi at samsung.com
• [PATCH 4/4] mtd: gpmi-nand: move to dma_transfer_direction   Huang Shijie
• [PATCH 3/4] mtd: fix compile error for gpmi-nand   Huang Shijie
• [PATCHv11 2/8] ARM: OMAP2+: hwmod: Add API to check IO PAD wakeup status   Paul Walmsley
• [PATCHv11 1/8] ARM: OMAP2+: hwmod: Add API to enable IO ring wakeup.   Paul Walmsley
• [PATCHv11 2/8] ARM: OMAP2+: hwmod: Add API to check IO PAD wakeup status   Paul Walmsley
• Git pull request: update to the Marvell Orion SOC family   Olof Johansson
• [PATCH v4 0/6] common clk framework   Mike Turquette
• [PATCH v4 1/6] clk: Kconfig: add entry for HAVE_CLK_PREPARE   Mike Turquette
• [PATCH v4 2/6] Documentation: common clk API   Mike Turquette
• [PATCH v4 3/6] clk: introduce the common clock framework   Mike Turquette
• [PATCH v4 4/6] clk: introduce rate change notifiers   Mike Turquette
• [PATCH v4 5/6] clk: basic gateable and fixed-rate clks   Mike Turquette
• [PATCH v4 6/6] clk: export the clk tree topology to debugfs   Mike Turquette
• [PATCH v4 0/6] common clk framework   Turquette, Mike
• [PATCH 0/7] RFC: convert OMAP to common struct clk   Mike Turquette
• [PATCH 1/7] OMAP: Kconfig: select GENERIC_CLK   Mike Turquette
• [PATCH 2/7] HACK: omap4: clk: convert to common struct clk   Mike Turquette
• [PATCH 4/7] omap: hwmod: convert to use common struct clk   Mike Turquette
• [PATCH 5/7] omap: panda: use clk_prepare in ehci init   Mike Turquette
• [PATCH 6/7] omap: dss: use clk_prepare in dss reset   Mike Turquette
• [PATCH 7/7] HACK: comment WARN_ON in _clkdm_clk_hwmod_disable   Mike Turquette
• [PATCH 3/7] HACK: omap: convert 44xx data to common struct clk   Paul Walmsley
• [PATCH 0/6] HACK: OMAP: testing common clk features   Mike Turquette
• [PATCH 1/6] HACK: omap: opp: add fake 400MHz OPP to bypass MPU   Mike Turquette
• [PATCH 2/6] omap: clk: .round_rate for propagating to parents   Mike Turquette
• [PATCH 3/6] HACK: omap: clk: add mpu_periphclk clk node   Mike Turquette
• [PATCH 4/6] HACK: cpufreq: omap: change mpu_clk's rate   Mike Turquette
• [PATCH 5/6] smp_twd: Reconfigure clockevents after cpufreq change   Mike Turquette
• [PATCH 6/6] HACK: arm: reprogram twd based on clk notifier   Mike Turquette
• [PATCH 3/7] HACK: omap: convert 44xx data to common struct clk   Turquette, Mike
• [PATCH v4 3/6] clk: introduce the common clock framework   Ryan Mallon
• [linux-next] make s5p64x0_defconfig build error   Axel Lin
• [PATCH v2 07/10] arm/dts: omap4-panda: Add twl6030 and i2c EEPROM   Kevin Hilman
• [PATCH v4 5/6] clk: basic gateable and fixed-rate clks   Ryan Mallon
• [PATCH V3 0/4] add imx6q sabrelite board support   Richard Zhao
• [PATCH 3/7] HACK: omap: convert 44xx data to common struct clk   Paul Walmsley
• [PATCH V3] ARM: EXYNOS4: Modified files for SPI consolidation work   Tushar Behera
• [PATCH V3 1/4] dts/imx: rename gpio labels to consistent with hw spec   Shawn Guo
• [PATCH V3 2/4] dts/imx: rename uart labels to consistent with hw spec   Shawn Guo
• [PATCH V3 3/4] arm/imx6: add imx6q sabrelite board support   Shawn Guo
• [PATCH V3 4/4] arm/imx6q-sabrelite: add enet phy ksz9021rn fixup   Shawn Guo
• [PATCH v2] arm/imx6q: Rename Sabreauto to Armadillo2   Shawn Guo
• [PATCH] ARM: imx6q: generate imx6q dtb files   Shawn Guo
• [PATCH V3 4/6] ARM: S5P64X0: Modified files for SPI consolidation work   Tushar Behera
• [RFC PATCH v2 0/2] Add common cpuidle code for consolidation.   Robert Lee
• [RFC PATCH v2 1/2] cpuidle: Add common init interface and idle functionality   Robert Lee
• [RFC PATCH v2 2/2] ARM: imx: Add mx5 cpuidle implmentation   Robert Lee
• [PATCH 5/5] ASoC: mxs: correct 'direction' of device_prep_dma_cyclic   Shawn Guo
• [PATCH v4 3/6] clk: introduce the common clock framework   Richard Zhao
• [PATCH v2] SPI: add CSR SiRFprimaII SPI controller driver   Barry Song
• [PATCH] ux500: remove overlapping iotable entries   Linus Walleij
• [PATCH v2 RESEND] SPI: add CSR SiRFprimaII SPI controller driver   Barry Song
• [PATCH v2] SPI: add CSR SiRFprimaII SPI controller driver   Barry Song
• [PATCH v2] ARM: OMAP3LOGIC: Adding DSS support   Tomi Valkeinen
• [PATCH v8 00/20] OMAP2+: UART: Runtime adaptation + cleanup   Govindraj
• [PATCH 5/5] ASoC: mxs: correct 'direction' of device_prep_dma_cyclic   Dong Aisheng-B29396
• [PATCH 6/6] HACK: arm: reprogram twd based on clk notifier   Linus Walleij
• [PATCH v4] I2C: add CSR SiRFprimaII on-chip I2C controllers driver   Barry Song
• [PATCH v8 00/20] OMAP2+: UART: Runtime adaptation + cleanup   Govindraj
• [RFC V2 0/8] imx5 clock port to Mike's clkv4   Richard Zhao
• [PATCH v3] arm: omap3evm: Add support for an MT9M032 based camera board.   Igor Grinberg
• [PATCH v13] AT91: Add a driver for the ADC   Maxime Ripard
• [PATCH 1/3] ARM: AT91: Add platform data for the ADCs   Maxime Ripard
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Maxime Ripard
• [PATCH 3/3] ARM: AT91: Add the ADC to the sam9g20ek board   Maxime Ripard
• [PATCHv11 1/8] ARM: OMAP2+: hwmod: Add API to enable IO ring wakeup.   Tero Kristo
• [PATCH 1/3] PWM: add pwm framework support   Thierry Reding
• [RFC V2 0/8] imx5 clock port to Mike's clkv4   Richard Zhao
• [PATCHv11 2/8] ARM: OMAP2+: hwmod: Add API to check IO PAD wakeup status   Tero Kristo
• [PATCHv11 2/8] ARM: OMAP2+: hwmod: Add API to check IO PAD wakeup status   Tero Kristo
• [PATCH 1/3] ARM: AT91: Add platform data for the ADCs   Alexander Stein
• [PATCH v5 07/11] davinci: dm644x: Replace register base value with a defined macro   Sergei Shtylyov
• [PATCH v5 10/11] davinci: dm644x: add support for v4l2 video display   Sergei Shtylyov
• [PATCH V2 2/7] arm/imx6: add imx6q sabrelite board support   Sascha Hauer
• [PATCH 01/10] GPIO: gpio-generic: Move initialization up to postcore   Janusz Krzysztofik
• [PATCH v2 0/4] PM/Devfreq: Exynos4 bus frequency, vdd_int, and vdd_mif   MyungJoo Ham
• [PATCH v2 1/4] ARM: EXYNOS4: Add DMC1, allow PPMU access for DMC.   MyungJoo Ham
• [PATCH v2 2/4] ARM: EXYNOS4: Add clock register addresses for Exynos4x12 bus devfreq driver   MyungJoo Ham
• [PATCH v2 3/4] PM/Devfreq: Add Exynos4-bus device DVFS driver for Exynos4210/4212/4412.   MyungJoo Ham
• [PATCH v2 4/4] ARM Exynos4210-Nuri: support Exynos4210-bus Devfreq driver.   MyungJoo Ham
• [PATCH v4 2/5] ARM: SMP: Refactor Kconfig to be more maintainable   Dave Martin
• [PATCH 1/3] PWM: add pwm framework support   Sascha Hauer
• [PATCH v4 REPOST 0/5] Refactor common Kconfigs for easier maintenance   Dave Martin
• [PATCH v4 REPOST 1/5] ARM: l2x0/pl310: Refactor Kconfig to be more maintainable   Dave Martin
• [PATCH v4 REPOST 2/5] ARM: SMP: Refactor Kconfig to be more maintainable   Dave Martin
• [PATCH v4 REPOST 3/5] omap4: Unconditionally require l2x0 L2 cache controller support   Dave Martin
• [PATCH v4 REPOST 4/5] highbank: Unconditionally require l2x0 L2 cache controller support   Dave Martin
• [PATCH v4 REPOST 5/5] imx6q: Remove unconditional dependency on l2x0 L2 cache support   Dave Martin
• [PATCH 0/7] remoteproc/rpmsg: a few trivial fixes   Ohad Ben-Cohen
• [PATCH 1/7] remoteproc: do not require an iommu   Ohad Ben-Cohen
• [PATCH 2/7] remoteproc: avoid registering a virtio device if not supported   Ohad Ben-Cohen
• [PATCH 3/7] remoteproc: remove unused resource type   Ohad Ben-Cohen
• [PATCH 4/7] remoteproc/omap: utilize module_platform_driver   Ohad Ben-Cohen
• [PATCH 5/7] remoteproc: look for truncated firmware images   Ohad Ben-Cohen
• [PATCH 6/7] remoteproc: add Kconfig menu   Ohad Ben-Cohen
• [PATCH 7/7] rpmsg: add Kconfig menu   Ohad Ben-Cohen
• [PATCH v3 0/4] OMAP serial device tree support   Rajendra Nayak
• [PATCH v3 1/4] omap-serial: Get rid of all pdev->id usage   Rajendra Nayak
• [PATCH v3 2/4] omap-serial: Use default clock speed (48Mhz) if not specified   Rajendra Nayak
• [PATCH v3 3/4] omap-serial: Add minimal device tree support   Rajendra Nayak
• [PATCH v3 4/4] ARM: omap: pass minimal SoC/board data for UART from dt   Rajendra Nayak
• [PATCH v4 REPOST 1/5] ARM: l2x0/pl310: Refactor Kconfig to be more maintainable   Anton Vorontsov
• [PATCH v2] ARM: OMAP3LOGIC: Adding DSS support   Alex Gershgorin
• [PATCH v3] ARM: OMAP3LOGIC: Adding DSS support   Alex
• [linux-next] make s5p64x0_defconfig build error   Will Deacon
• [PATCH 6/8] common: dma-mapping: change alloc/free_coherent method to more generic alloc/free_attrs   Marek Szyprowski
• [PATCH] Linux OMAP: Add omap_reserve functionality   Alex
• [PATCH 01/10] GPIO: gpio-generic: Move initialization up to postcore   Janusz Krzysztofik
• [PATCH] ARM: davinci: add missing commas on last members of structure and arrays   Nori, Sekhar
• [PATCH v3] arm: omap3evm: Add support for an MT9M032 based camera board.   Laurent Pinchart
• [PATCH v4 3/6] clk: introduce the common clock framework   Thomas Gleixner
• [PATCH] ARM: OMAP: hsmmc: add max_freq field   Daniel Mack
• [PATCH v4 REPOST 5/5] imx6q: Remove unconditional dependency on l2x0 L2 cache support   Shawn Guo
• [PATCH v4 REPOST 4/5] highbank: Unconditionally require l2x0 L2 cache controller support   Rob Herring
• [PATCH v3 0/4] OMAP serial device tree support   Rob Herring
• [PATCH v4 REPOST 4/5] highbank: Unconditionally require l2x0 L2 cache controller support   Dave Martin
• [RFC PATCH v2 0/7] media: introduce object detection(OD) driver   Ming Lei
• [RFC PATCH v2 1/8] omap4: introduce fdif(face detect module) hwmod   Ming Lei
• [RFC PATCH v2 2/8] omap4: build fdif omap device from hwmod   Ming Lei
• [RFC PATCH v2 3/8] media: videobuf2: move out of setting pgprot_noncached from vb2_mmap_pfn_range   Ming Lei
• [RFC PATCH v2 4/8] media: videobuf2: introduce VIDEOBUF2_PAGE memops   Ming Lei
• [RFC PATCH v2 5/8] media: v4l2-ioctl: support 64/32 compatible array parameter   Ming Lei
• [RFC PATCH v2 6/8] media: v4l2: introduce two IOCTLs for object detection   Ming Lei
• [RFC PATCH v2 7/8] media: video: introduce object detection driver module   Ming Lei
• [RFC PATCH v2 8/8] media: video: introduce omap4 face detection module driver   Ming Lei
• [PATCH v4 REPOST 5/5] imx6q: Remove unconditional dependency on l2x0 L2 cache support   Richard Zhao
• [PATCH V2 2/7] arm/imx6: add imx6q sabrelite board support   Richard Zhao
• [PATCH v3] ARM: OMAP3LOGIC: Adding DSS support   Igor Grinberg
• [PATCH] arm, davinci: configure davinci aemif chipselects through OF   Ben Gardiner
• [PATCH v3 0/4] OMAP serial device tree support   Govindraj
• serial tty name   Richard Zhao
• [PATCH v6 0/6] PM QoS: implement the OMAP low level constraints management code   jean.pihet at newoldbits.com
• [PATCH 1/6] OMAP2+: powerdomain: control power domains next state   jean.pihet at newoldbits.com
• [PATCH 2/6] OMAP2+: omap_hwmod: manage the wake-up latency constraints   jean.pihet at newoldbits.com
• [PATCH 3/6] OMAP: PM: register to the per-device PM QoS framework   jean.pihet at newoldbits.com
• [PATCH 4/6] OMAP3: cpuidle: next C-state decision depends on the PM QoS MPU and CORE constraints   jean.pihet at newoldbits.com
• [PATCH 5/6] OMAP3: update cpuidle latency and threshold figures   jean.pihet at newoldbits.com
• [PATCH 6/6] OMAP3: powerdomain data: add wake-up latency figures   jean.pihet at newoldbits.com
• [PATCH v5 0/6] PM QoS: implement the OMAP low level constraints management code   Jean Pihet
• [PATCH v4 REPOST 5/5] imx6q: Remove unconditional dependency on l2x0 L2 cache support   Dave Martin
• [PATCH v7 00/14] Add support for tegra30 and cardhu   Peter De Schrijver
• [PATCH v7 01/14] arm/tegra: initial device tree for tegra30   Peter De Schrijver
• [PATCH v7 02/14] arm/tegra: cleanup tegra20 support   Peter De Schrijver
• [PATCH v7 03/14] arm/tegra: prepare clock code for multiple tegra variants   Peter De Schrijver
• [PATCH v7 04/14] arm/tegra: don't export clk_measure_input_freq   Peter De Schrijver
• [PATCH v7 05/14] arm/tegra: prepare early init for multiple tegra variants   Peter De Schrijver
• [PATCH v7 06/14] arm/tegra: rename board-dt.c to board-dt-tegra20.c   Peter De Schrijver
• [PATCH v7 07/14] arm/tegra: use PMC reset   Peter De Schrijver
• [PATCH v7 08/14] arm/tegra: generalize L2 cache initialization   Peter De Schrijver
• [PATCH v7 09/14] arm/tegra: rename tegra20 pinmux files   Peter De Schrijver
• [PATCH v7 10/14] arm/tegra: prepare pinmux code for multiple tegra variants   Peter De Schrijver
• [PATCH v7 11/14] arm/tegra: add new fields to struct tegra_pingroup_desc   Peter De Schrijver
• [PATCH v7 12/14] arm/tegra: pinmux tables and definitions for tegra30   Peter De Schrijver
• [PATCH v7 13/14] arm/tegra: implement support for tegra30   Peter De Schrijver
• [PATCH v7 14/14] arm/tegra: add support for tegra30 based board cardhu   Peter De Schrijver
• [PATCH v3] ARM: OMAP3LOGIC: Adding DSS support   Alex Gershgorin
• serial tty name   Igor Grinberg
• [PATCH V3 0/6] SPI platform device consolidation   Padmavathi Venna
• [PATCH V3 1/6] ARM: SAMSUNG: Consolidation of SPI platform devices to plat-samsung   Padmavathi Venna
• [PATCH V3 2/6] ARM: S3C64XX: Modified files for SPI consolidation work   Padmavathi Venna
• [PATCH V3 3/6] ARM: S5PC100: Modified files for SPI consolidation work   Padmavathi Venna
• [PATCH V3 4/6] ARM: S5P64X0: Modified files for SPI consolidation work   Padmavathi Venna
• [PATCH V3 5/6] ARM: S5PV210: Modified files for SPI consolidation work   Padmavathi Venna
• [PATCH V3 6/6] ARM: S3C64XX: Modified according to SPI consolidation work.   Padmavathi Venna
• [PATCH V3] ARM: EXYNOS4: Modified files for SPI consolidation work   Padmavathi Venna
• [PATCH v3 0/4] OMAP serial device tree support   Kevin Hilman
• [PATCH 0/9] irq domain for gen irq chip and pl061 DT irq support   Rob Herring
• [PATCH 1/9] dt: add empty of_get_node/of_put_node functions   Rob Herring
• [PATCH 2/9] irq: check domain hwirq range for DT translate   Rob Herring
• [PATCH 3/9] irq: convert generic-chip to use irq_domain   Rob Herring
• [PATCH 4/9] gpio: pl061: use chained_irq_* functions in irq handler   Rob Herring
• [PATCH 5/9] gpio: pl061: convert to use 0 for no irq   Rob Herring
• [PATCH 6/9] ARM: realview: convert pl061 no irq to 0 instead of -1   Rob Herring
• [PATCH 7/9] gpio: pl061: convert to use generic irq chip   Rob Herring
• [PATCH 8/9] gpio: pl061: enable interrupts with DT style binding   Rob Herring
• [PATCH 9/9] ARM: highbank: add interrupt properties to gpio nodes   Rob Herring
• [PATCH v8 00/20] OMAP2+: UART: Runtime adaptation + cleanup   Kevin Hilman
• serial tty name   Rob Herring
• [PATCH V2 1/2] pinctrl: enable pinmux for pxa series   Arnd Bergmann
• [PATCH 0/9] irq domain for gen irq chip and pl061 DT irq support   Rob Herring
• [RFC PATCH v2 2/4] pinctrl: imx: add pinmux imx driver   Fabio Estevam
• [PATCHV2 REPOST 0/7] ARM: OMAP3PLUS PM: Add IO DaisyChain support via hwmod mux   Vishwanath BS
• [PATCHV2 REPOST 1/7] ARM: OMAP3 PM: correct enable/disable of daisy io chain   Vishwanath BS
• [PATCHV2 REPOST 2/7] ARM: OMAP3 PM: Move IO Daisychain function to omap3 prm file   Vishwanath BS
• [PATCHV2 REPOST 3/7] ARM: OMAP4 PM: Add IO Daisychain support   Vishwanath BS
• [PATCHV2 REPOST 4/7] ARM: OMAP3 PM: Enable IO Wake up   Vishwanath BS
• [PATCHV2 REPOST 5/7] ARM: OMAP3PLUS PM: Add IO Daisychain support via hwmod mux   Vishwanath BS
• [PATCHV2 REPOST 6/7] ARM: OMAP3 PM: Remove IO Daisychain control from cpuidle   Vishwanath BS
• [PATCHV2 REPOST 7/7] ARM: OMAP3 PM: Enable IO Daisychain for supported chips   Vishwanath BS
• [PATCH 1/9] dt: add empty of_get_node/of_put_node functions   Grant Likely
• [RFC PATCH v2 0/4] pinctrl: imx: add pinnmux support   Dong Aisheng
• [RFC PATCH v2 1/4] dt: add of_get_child_number helper function   Dong Aisheng
• [RFC PATCH v2 2/4] pinctrl: imx: add pinmux imx driver   Dong Aisheng
• [RFC PATCH v2 3/4] ARM: imx6q: using pinmux subsystem   Dong Aisheng
• [RFC PATCH v2 4/4] mmc: sdhci-esdhc-imx: using pinmux subsystem   Dong Aisheng
• [PATCH 2/9] irq: check domain hwirq range for DT translate   Grant Likely
• [PATCH v8 00/20] OMAP2+: UART: Runtime adaptation + cleanup   Govindraj
• [PATCH v2 07/10] arm/dts: omap4-panda: Add twl6030 and i2c EEPROM   Cousson, Benoit
• [PATCH] ux500: remove overlapping iotable entries   Nicolas Pitre
• [PATCH v2 02/10] i2c: OMAP: Add DT support for i2c controller   Rob Herring
• [PATCH] ux500: remove overlapping iotable entries   Linus Walleij
• [PATCH v3 0/4] OMAP serial device tree support   Alan Cox
• [PATCH v4 2/5] ARM: SMP: Refactor Kconfig to be more maintainable   Linus Walleij
• [RFC PATCH v2 0/4] pinctrl: imx: add pinnmux support   Linus Walleij
• [PATCH v4 2/5] ARM: SMP: Refactor Kconfig to be more maintainable   David Brown
• [RFC PATCH v2 4/4] mmc: sdhci-esdhc-imx: using pinmux subsystem   Linus Walleij
• [RFC PATCH v2 2/4] pinctrl: imx: add pinmux imx driver   Linus Walleij
• [RFC PATCH v2 3/4] ARM: imx6q: using pinmux subsystem   Linus Walleij
• [RFC PATCH v2 1/4] dt: add of_get_child_number helper function   Rob Herring
• [GIT PULL] DaVinci cleanup for v3.3   Nori, Sekhar
• [PATCH v3] arm: omap3evm: Add support for an MT9M032 based camera board.   martin at neutronstar.dyndns.org
• [PATCH v4 REPOST 3/5] omap4: Unconditionally require l2x0 L2 cache controller support   Tony Lindgren
• [PATCH v4 REPOST 1/5] ARM: l2x0/pl310: Refactor Kconfig to be more maintainable   Tony Lindgren
• [PATCH v4 REPOST 2/5] ARM: SMP: Refactor Kconfig to be more maintainable   Tony Lindgren
• [PATCH 1/3] of/base: Take NULL string into account for property with multiple strings   Tony Lindgren
• [PATCH v4 2/5] ARM: SMP: Refactor Kconfig to be more maintainable   Dave Martin
• [PATCH 01/10] GPIO: gpio-generic: Move initialization up to postcore   Tony Lindgren
• [PATCH v3] arm: omap3evm: Add support for an MT9M032 based camera board.   martin at neutronstar.dyndns.org
• [PATCH v3 0/4] OMAP serial device tree support   Greg KH
• [PATCH v4 REPOST 3/5] omap4: Unconditionally require l2x0 L2 cache controller support   Dave Martin
• serial tty name   Uwe Kleine-König
• [GIT PULL] DaVinci features for v3.3   Nori, Sekhar
• [PATCH v4 REPOST 3/5] omap4: Unconditionally require l2x0 L2 cache controller support   Tony Lindgren
• [PATCH v8 00/20] OMAP2+: UART: Runtime adaptation + cleanup   Kevin Hilman
• [PATCH v4 3/6] clk: introduce the common clock framework   Turquette, Mike
• [linux-next] make s5p64x0_defconfig build error   Russell King - ARM Linux
• [PATCH v3 4/4] ARM: omap: pass minimal SoC/board data for UART from dt   Tony Lindgren
• [GIT PULL] SoC changes for omap4470, ti814x, am33xx for v3.3 merge window   Tony Lindgren
• [GIT PULL] omap board changes for v3.3 merge window   Tony Lindgren
• [GIT PULL] omap musb platform init updates for v3.3 merge window   Tony Lindgren
• [GIT PULL] SoC changes for omap4470, ti814x, am33xx for v3.3 merge window   Tony Lindgren
• [PATCH 01/10] GPIO: gpio-generic: Move initialization up to postcore   Janusz Krzysztofik
• [PATCH] serial/imx: propagate error from of_alias_get_id instead of using -ENODEV   Uwe Kleine-König
• [PATCH] serial/imx: propagate error from of_alias_get_id instead of using -ENODEV   Uwe Kleine-König
• [linux-next] make s5p64x0_defconfig build error   Nicolas Pitre
• [PATCH] ARM: OMAP: mcbsp: Fix possible memory corruption   Ramirez Luna, Omar
• [PATCH v4 REPOST 3/5] omap4: Unconditionally require l2x0 L2 cache controller support   Rob Herring
• [RFC PATCH v2 4/4] mmc: sdhci-esdhc-imx: using pinmux subsystem   Sascha Hauer
• [PATCH 3/9] irq: convert generic-chip to use irq_domain   Grant Likely
• [PATCH 4/9] gpio: pl061: use chained_irq_* functions in irq handler   Grant Likely
• [PATCH 5/9] gpio: pl061: convert to use 0 for no irq   Grant Likely
• [PATCH 6/9] ARM: realview: convert pl061 no irq to 0 instead of -1   Grant Likely
• [PATCH 7/9] gpio: pl061: convert to use generic irq chip   Grant Likely
• [PATCH 3/9] irq: convert generic-chip to use irq_domain   Rob Herring
• [PATCH 3/9] irq: convert generic-chip to use irq_domain   Grant Likely
• [PATCH v4] ARM: OMAP3LOGIC: Adding DSS support   Alex
• [PATCH 8/9] gpio: pl061: enable interrupts with DT style binding   Grant Likely
• [PATCH 9/9] ARM: highbank: add interrupt properties to gpio nodes   Grant Likely
• [RFC PATCH v2 1/4] dt: add of_get_child_number helper function   Grant Likely
• [RFC PATCH v2 2/4] pinctrl: imx: add pinmux imx driver   Grant Likely
• [PATCH v4 REPOST 3/5] omap4: Unconditionally require l2x0 L2 cache controller support   Tony Lindgren
• [GIT PULL] two omap fixes for v3.2-rc5   Tony Lindgren
• [PATCH] ARM: OMAP: mcbsp: Fix possible memory corruption   Tony Lindgren
• [PATCH] ARM: fix $(CROSS_COMPILE) prefix missing from size invocation   Tony Lindgren
• [PATCH] ARM: davinci: add missing commas on last members of structure and arrays   Tony Lindgren
• [PATCH v4] ARM: sched_clock: allow sched_clock to be selected at runtime   Tony Lindgren
• [PATCH 01/10] GPIO: gpio-generic: Move initialization up to postcore   Tony Lindgren
• [RFC PATCH v2 4/4] mmc: sdhci-esdhc-imx: using pinmux subsystem   Linus Walleij
• [PATCH 1/2] irqdomain: export irq_domain_simple_ops for !CONFIG_OF   Jamie Iles
• [PATCH 2/2] ARM: vic: always use simple ops   Jamie Iles
• [PATCH 1/2] irqdomain: export irq_domain_simple_ops for !CONFIG_OF   Jamie Iles
• [PATCH 3/9] irq: convert generic-chip to use irq_domain   Rob Herring
• [linux-next] make s5p64x0_defconfig build error   Denis Kuzmenko
• [linux-next] make s5p64x0_defconfig build error   Kukjin Kim
• [linux-next] make s5p64x0_defconfig build error   Russell King - ARM Linux
• [linux-next] make s5p64x0_defconfig build error   Axel Lin
• serial tty name   Richard Zhao
• [PATCH v2 07/10] arm/dts: omap4-panda: Add twl6030 and i2c EEPROM   Kevin Hilman
• serial tty name   Richard Zhao
• [GIT PULL] OMAP: UART cleanup and runtime PM conversion for v3.3   Kevin Hilman
• [PATCH v4 REPOST 5/5] imx6q: Remove unconditional dependency on l2x0 L2 cache support   Richard Zhao
• [PATCH V2 1/2] DMA: PL330: Merge PL330 driver into drivers/dma/   Kukjin Kim
• [PATCH V2 RE-SEND 1/2] DMA: PL330: Merge PL330 driver into drivers/dma/   Kukjin Kim
• [PATCH v4] ARM: sched_clock: allow sched_clock to be selected at runtime   Shawn Guo
• [PATCH] DMA: PL330: Support MEMTOMEM transmit w/o RMB, WMB   Kukjin Kim
• [PATCH] ARM: fix $(CROSS_COMPILE) prefix missing from size invocation   Janusz Krzysztofik
• [PATCH v4 REPOST 5/5] imx6q: Remove unconditional dependency on l2x0 L2 cache support   Shawn Guo
• [PATCH v4 REPOST 5/5] imx6q: Remove unconditional dependency on l2x0 L2 cache support   Richard Zhao
• [PATCH v4] ARM: sched_clock: allow sched_clock to be selected at runtime   Kukjin Kim
• [PATCH V2 1/2] pinctrl: enable pinmux for pxa series   Haojian Zhuang
• [PATCH] serial/imx: propagate error from of_alias_get_id instead of using -ENODEV   Shawn Guo
• [PATCH V2 1/2] pinctrl: enable pinmux for pxa series   Haojian Zhuang
• [PATCH] serial/imx: propagate error from of_alias_get_id instead of using -ENODEV   Shawn Guo
• [PATCH] ARM: add device tree blobs to .gitignore   Shawn Guo
• OT: ARM Linux job in Buckingham, UK   Jon Povey
• [PATCH] serial/imx: propagate error from of_alias_get_id instead of using -ENODEV   Jason Hui
• [PATCH 16/19] eukrea-cpuimx51: remove board   Amit Kucheria
• [PATCH v4 0/4] OMAP: iommu: hwmod support and runtime PM   Omar Ramirez Luna
• [PATCH v4 1/4] OMAP3: hwmod data: add mmu data for iva and isp   Omar Ramirez Luna
• [PATCH v4 2/4] OMAP4: hwmod data: add mmu hwmod for ipu and dsp   Omar Ramirez Luna
• [PATCH v4 3/4] OMAP3/4: iommu: migrate to hwmod framework   Omar Ramirez Luna
• [PATCH v4 4/4] OMAP3/4: iommu: adapt to runtime pm   Omar Ramirez Luna
• [linux-next] make s5p64x0_defconfig build error   Mark Brown
• [PATCH 2/9] irq: check domain hwirq range for DT translate   Shawn Guo
• [PATCH 3/9] irq: convert generic-chip to use irq_domain   Shawn Guo
• [PATCH V2 1/2] pinctrl: enable pinmux for pxa series   Haojian Zhuang
• [RFC PATCH v2 2/4] pinctrl: imx: add pinmux imx driver   Dong Aisheng-B29396
• [RFC PATCH v2 1/4] dt: add of_get_child_number helper function   Dong Aisheng-B29396
• [PATCH 3/9] irq: convert generic-chip to use irq_domain   Shawn Guo
• [GIT PULL] imx6/boards for v3.3   Shawn Guo
• [PATCH v3 4/4] ARM: omap: pass minimal SoC/board data for UART from dt   Rajendra Nayak
• [PATCH 16/19] eukrea-cpuimx51: remove board   Eric Bénard
• [RFC PATCH v2 4/4] mmc: sdhci-esdhc-imx: using pinmux subsystem   Shawn Guo
• [RFC PATCH v2 4/4] mmc: sdhci-esdhc-imx: using pinmux subsystem   Dong Aisheng-B29396
• [RFC PATCH v2 2/4] pinctrl: imx: add pinmux imx driver   Dong Aisheng-B29396
• [RFC PATCH v2 3/4] ARM: imx6q: using pinmux subsystem   Dong Aisheng-B29396
• [RFC PATCH v2 2/4] pinctrl: imx: add pinmux imx driver   Dong Aisheng-B29396
• Massive log spam loading modules on ARM after 3.2-rc5 (regression)   Uwe Kleine-König
• [linux-next] make s5p64x0_defconfig build error   Heiko Stübner
• [PATCH] iommu: Initialize domain->handler in iommu_domain_alloc()   Joerg Roedel
• [PATCH] serial/imx: let probing fail for the dt case without a valid alias   Uwe Kleine-König
• [RFC PATCH v2 2/4] pinctrl: imx: add pinmux imx driver   Dong Aisheng-B29396
• [RFC PATCH v2 2/4] pinctrl: imx: add pinmux imx driver   Shawn Guo
• [RFC PATCH v2 4/4] mmc: sdhci-esdhc-imx: using pinmux subsystem   Linus Walleij
• [RFC PATCH v2 4/4] mmc: sdhci-esdhc-imx: using pinmux subsystem   Linus Walleij
• Massive log spam loading modules on ARM after 3.2-rc5 (regression)   Russell King - ARM Linux
• [PATCH v2] PM: HIBERNATION: skip the swap size check if the snapshot image size is anticipative   Barry Song
• [RFC PATCH v2 4/4] mmc: sdhci-esdhc-imx: using pinmux subsystem   Dong Aisheng-B29396
• [RFC PATCH v2 4/4] mmc: sdhci-esdhc-imx: using pinmux subsystem   Dong Aisheng-B29396
• [RFC PATCH v2 4/4] mmc: sdhci-esdhc-imx: using pinmux subsystem   Shawn Guo
• [PATCH] serial/imx: let probing fail for the dt case without a valid alias   Shawn Guo
• Massive log spam loading modules on ARM after 3.2-rc5 (regression)   Uwe Kleine-König
• [RFC PATCH v2 4/4] mmc: sdhci-esdhc-imx: using pinmux subsystem   Sascha Hauer
• [RFC PATCH v2 4/4] mmc: sdhci-esdhc-imx: using pinmux subsystem   Sascha Hauer
• [PATCH] plat-omap: mcbsp: Configure wakeup in later phase   Peter Ujfalusi
• [PATCH 0/2] OMAP4: McBSP: Fix clock reparenting   Peter Ujfalusi
• [PATCH 1/2] OMAP2+: mcbsp: Restructure clk reparenting code   Peter Ujfalusi
• [PATCH 2/2] OMAP4: mcbsp: Clock reparenting support   Peter Ujfalusi
• Massive log spam loading modules on ARM after 3.2-rc5 (regression)   Russell King - ARM Linux
• [PATCH v3 2/2] [media] V4L: atmel-isi: add clk_prepare()/clk_unprepare() functions   Wu, Josh
• [PATCH v3 4/4] ARM: omap: pass minimal SoC/board data for UART from dt   Cousson, Benoit
• [PATCH v3] arm: omap3evm: Add support for an MT9M032 based camera board.   Igor Grinberg
• [RFC PATCH v2 4/4] mmc: sdhci-esdhc-imx: using pinmux subsystem   Dong Aisheng-B29396
• Massive log spam loading modules on ARM after 3.2-rc5 (regression)   Uwe Kleine-König
• [PATCH v4] ARM: sched_clock: allow sched_clock to be selected at runtime   Marc Zyngier
• [PATCH v4] ARM: sched_clock: allow sched_clock to be selected at runtime   Marc Zyngier
• [PATCH v5 07/11] davinci: dm644x: Replace register base value with a defined macro   Hadli, Manjunath
• [PATCH v5 10/11] davinci: dm644x: add support for v4l2 video display   Hadli, Manjunath
• [RFC V1 1/4] cpufreq: add arm soc generic cpufreq driver   Richard Zhao
• [RFC V1 1/4] cpufreq: add arm soc generic cpufreq driver   Richard Zhao
• [RFC PATCH v2 4/4] mmc: sdhci-esdhc-imx: using pinmux subsystem   Shawn Guo
• [RFC PATCH v2 4/4] mmc: sdhci-esdhc-imx: using pinmux subsystem   Dong Aisheng-B29396
• [RFC PATCH v2 4/4] mmc: sdhci-esdhc-imx: using pinmux subsystem   Shawn Guo
• [RFC PATCH v2 4/4] mmc: sdhci-esdhc-imx: using pinmux subsystem   Sascha Hauer
• [RFC V1 2/4] dts/imx6q: add cpufreq property   Shawn Guo
• [PATCH v3] arm: omap3evm: Add support for an MT9M032 based camera board.   Laurent Pinchart
• [PATCH v6 00/11] ARM: davinci:add support for dm644x vpbe display driver   Manjunath Hadli
• [PATCH v6 01/11] davinci: vpif: remove obsolete header file inclusion   Manjunath Hadli
• [PATCH v6 02/11] ARM: davinci: dm644x: remove the macros from the header to move to c file   Manjunath Hadli
• [PATCH v6 03/11] ARM: davinci: dm365: remove the macros from the header to move to c file   Manjunath Hadli
• [PATCH v6 04/11] ARM: davinci: dm646x: remove the macros from the header to move to c file   Manjunath Hadli
• [PATCH v6 05/11] ARM: davinci: create new common platform header for davinci   Manjunath Hadli
• [PATCH v6 06/11] davinci: eliminate use of IO_ADDRESS() on sysmod   Manjunath Hadli
• [PATCH v6 07/11] davinci: dm644x: Replace register base value with a defined macro   Manjunath Hadli
• [PATCH v6 08/11] davinci: dm644x: change vpfe capture structure variables for consistency   Manjunath Hadli
• [PATCH v6 09/11] davinci: dm644x: move vpfe init from soc to board specific files   Manjunath Hadli
• [PATCH v6 10/11] davinci: dm644x: add support for v4l2 video display   Manjunath Hadli
• [PATCH v6 11/11] davinci: dm644x EVM: add support for VPBE display   Manjunath Hadli
• [RFC PATCH v2 4/4] mmc: sdhci-esdhc-imx: using pinmux subsystem   Shawn Guo
• [PATCH 1/5] ux500: support DB8520   Linus Walleij
• [PATCH 2/5] ux500: update ASIC detection for U5500   Linus Walleij
• [PATCH 3/5] ux500: register DB5500 PMU dynamically   Linus Walleij
• [PATCH 4/5] ux500: update register files   Linus Walleij
• [PATCH 5/5] ux500: remove support for early silicon revisions   Linus Walleij
• Massive log spam loading modules on ARM after 3.2-rc5 (regression)   Uwe Kleine-König
• Atmel AHB DMA support breaks MMC/SD card support   Bjørn Forsman
• [PATCH v2 2/2] [RFC] ARM: IOMMU: Tegra30: iommu_ops for SMMU driver   Hiroshi DOYU
• [PATCH v2 0/2] ARM: IOMMU: tegra: iommu_ops for GART driver   Hiroshi DOYU
• [RFC PATCH v2 4/4] mmc: sdhci-esdhc-imx: using pinmux subsystem   Sascha Hauer
• [PATCH 1/1] at91: drop ide driver in favor of the pata one   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] AT91: Update struct atmel_nand_data to support PMECC   Nicolas Ferre
• [PATCH 3/9] irq: convert generic-chip to use irq_domain   Rob Herring
• label string for kirkwood gpiochip   Holger Brunck
• [PATCH 3/9] irq: convert generic-chip to use irq_domain   Rob Herring
• [RFC PATCH v2 4/4] mmc: sdhci-esdhc-imx: using pinmux subsystem   Shawn Guo
• [PATCH 3/9] irq: convert generic-chip to use irq_domain   Rob Herring
• [PATCH v6 0/9] Versatile Express DT support   Pawel Moll
• [PATCH v6 1/9] ARM: versatile: Add missing ENDPROC to headsmp.S   Pawel Moll
• [PATCH v6 2/9] ARM: vexpress: Get rid of MMIO_P2V   Pawel Moll
• [PATCH v6 3/9] ARM: versatile: Map local timers using Device Tree when possible   Pawel Moll
• [PATCH v6 4/9] ARM: vexpress: Use FDT data in platform SMP calls   Pawel Moll
• [PATCH v6 5/9] ARM: vexpress: Add Device Tree support   Pawel Moll
• [PATCH v6 6/9] ARM: vexpress: Motherboard RS1 memory map support   Pawel Moll
• [PATCH v6 7/9] ARM: vexpress: Add Device Tree for V2P-CA5s core tile   Pawel Moll
• [PATCH v6 8/9] ARM: vexpress: Add Device Tree for V2P-CA9 core tile   Pawel Moll
• [PATCH v6 9/9] ARM: vexpress: Add Device Tree for V2P-CA15 core tile (TC1 variant)   Pawel Moll
• [PATCH 3/9] irq: convert generic-chip to use irq_domain   Shawn Guo
• [GIT PULL] at91 defconfigs for 3.3   Nicolas Ferre
• [PATCH 3/9] irq: convert generic-chip to use irq_domain   Shawn Guo
• label string for kirkwood gpiochip   Nicolas Pitre
• [GIT PULL] at91: devices and boards files update for 3.3   Nicolas Ferre
• iMX25 framebuffer 4bpp support?   Nils Faerber
• label string for kirkwood gpiochip   Holger Brunck
• [PATCH 3/9] irq: convert generic-chip to use irq_domain   Shawn Guo
• [PATCH] ARM: add device tree blobs to .gitignore   Dave Martin
• [PATCH v6 3/9] ARM: versatile: Map local timers using Device Tree when possible   Rob Herring
• [PATCH v2 02/10] i2c: OMAP: Add DT support for i2c controller   Cousson, Benoit
• [GIT PULL] at91: drivers for 3.3   Nicolas Ferre
• [PATCH v4 REPOST 5/5] imx6q: Remove unconditional dependency on l2x0 L2 cache support   Dave Martin
• [PATCHv3 3/7] ARM: OMAP4 PM: Add IO Daisychain support   Vishwanath BS
• [PATCH v6 3/9] ARM: versatile: Map local timers using Device Tree when possible   Pawel Moll
• [PATCH v2 02/10] i2c: OMAP: Add DT support for i2c controller   Rob Herring
• [PATCH v5 0/5] Refactor common Kconfigs for easier maintenance   Dave Martin
• [PATCH v5 1/5] ARM: l2x0/pl310: Refactor Kconfig to be more maintainable   Dave Martin
• [PATCH v5 2/5] ARM: SMP: Refactor Kconfig to be more maintainable   Dave Martin
• [PATCH v5 3/5] omap4: Unconditionally require l2x0 L2 cache controller support   Dave Martin
• [PATCH v5 4/5] highbank: Unconditionally require l2x0 L2 cache controller support   Dave Martin
• [PATCH v5 5/5] imx6q: Remove unconditional dependency on l2x0 L2 cache support   Dave Martin
• [PATCH 3/9] irq: convert generic-chip to use irq_domain   Grant Likely
• [patch] ARM: smpboot: Enable interrupts after marking CPU online/active   Peter Zijlstra
• [PATCH v2 02/10] i2c: OMAP: Add DT support for i2c controller   Cousson, Benoit
• [PATCH 0/4] [orion] move *_mbus_dram_info out of platform_data   Jason
• [PATCH 3/9] irq: convert generic-chip to use irq_domain   Rob Herring
• [PATCH 1/3] ARM: OMAP2+: kconfig: Enable devicetree by default for OMAP2+ systems   Cousson, Benoit
• [RFC PATCH v2 4/4] mmc: sdhci-esdhc-imx: using pinmux subsystem   Sascha Hauer
• [PATCH 3/9] irq: convert generic-chip to use irq_domain   Grant Likely
• [PATCH] arm,davinci: configure davinci aemif chipselects through OF   Nori, Sekhar
• [PATCH v6 3/9] ARM: versatile: Map local timers using Device Tree when possible   Pawel Moll
• [PATCH] ARM: PL330: Fix driver freeze   Javi Merino
• [PATCH 2/4] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller   Cousson, Benoit
• [PATCH v4 REPOST 2/5] ARM: SMP: Refactor Kconfig to be more maintainable   David Brown
• [PATCH v7 00/14] Add support for tegra30 and cardhu   Olof Johansson
• [PATCH] ARM: davinci: add missing commas on last members of structure and arrays   Nori, Sekhar
• [RFC V1 1/4] cpufreq: add arm soc generic cpufreq driver   Mark Langsdorf
• [RFC V1 2/4] dts/imx6q: add cpufreq property   Mark Langsdorf
• [RFC PATCH] ARM: vmlinux.lds.S: do not hardcode cacheline size as 32 bytes   Stephen Boyd
• [PATCH 0/6] ARM: at91: irqdomain and device tree for AIC and GPIO   Nicolas Ferre
• [PATCH v4 1/6] ARM: at91/aic: add irq domain and device tree support   Nicolas Ferre
• [PATCH 2/6] ARM: at91/gpio: add irqdomain to gpio interrupts   Nicolas Ferre
• [PATCH 3/6] ARM: at91/gpio: add DT support   Nicolas Ferre
• [PATCH 4/6] ARM: at91/gpio: add .to_irq gpio_chip handler and rework irq_to_gpio   Nicolas Ferre
• [PATCH 5/6] ARM: at91/gpio: remove the static specification of gpio_chip.base   Nicolas Ferre
• [PATCH 6/6] ARM: at91/board-dt: remove AIC irq domain from board file   Nicolas Ferre
• [PATCH 1/3] ARM: AT91: Add platform data for the ADCs   Maxime Ripard
• rmk not reading these lists   Russell King - ARM Linux
• [RFC V1 1/4] cpufreq: add arm soc generic cpufreq driver   Russell King - ARM Linux
• [PATCH] ARM: unwinder: fix bisection to find origin in .idx section   Uwe Kleine-König
• [PATCH 2/4] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller   Rob Herring
• [PATCH v7 00/14] Add support for tegra30 and cardhu   Stephen Warren
• [PATCH v3 4/4] ARM: omap: pass minimal SoC/board data for UART from dt   Tony Lindgren
• Very sparse and high interrupt map with SPARSE_IRQ   Michael Bohan
• [PATCH v3 4/4] ARM: omap: pass minimal SoC/board data for UART from dt   Cousson, Benoit
• [PATCH] ARM: add device tree blobs to .gitignore   Uwe Kleine-König
• [PATCHv12 0/9] OMAP3+: PRCM chain handler   Paul Walmsley
• [PATCH 1/9] ARM: OMAP2+: mux: add wakeup-capable hwmod mux entries to dynamic list   Paul Walmsley
• [PATCH 2/9] ARM: OMAP2+: hwmod: Add API to enable IO ring wakeup   Paul Walmsley
• [PATCH 3/9] ARM: OMAP3/4: PRM: add functions to read pending IRQs, PRM barrier   Paul Walmsley
• [PATCH 4/9] ARM: OMAP: PRCM: add support for chain interrupt handler   Paul Walmsley
• [PATCH 5/9] ARM: OMAP: PRCM: add suspend prepare / finish support   Paul Walmsley
• [PATCH 6/9] ARM: OMAP2+: mux: add support for PAD wakeup interrupts   Paul Walmsley
• [PATCH 7/9] ARM: OMAP: hwmod: add support for selecting mpu_irq for each wakeup pad   Paul Walmsley
• [PATCH 8/9] ARM: OMAP3: pm: use prcm chain handler   Paul Walmsley
• [PATCH 9/9] ARM: OMAP4: PRM: use PRCM interrupt handler   Paul Walmsley
• [PATCH v3 4/4] ARM: omap: pass minimal SoC/board data for UART from dt   Tony Lindgren
• [PATCH] arm/dts: Add minimal device tree support for omap2420 and omap2430   Tony Lindgren
• [PATCH 1/9] ARM: OMAP2+: mux: add wakeup-capable hwmod mux entries to dynamic list   Tony Lindgren
• [PATCH] ARM: drop unused parameter from flush_cache_user_range   Uwe Kleine-König
• [PATCH] ARM: drop unused parameter from flush_cache_user_range   Uwe Kleine-König
• [PATCH v2] [RESEND] Handle instruction cache maintenance fault properly   Uwe Kleine-König
• [PATCH v7 00/14] Add support for tegra30 and cardhu   Colin Cross
• [PATCH] ARM: fix $(CROSS_COMPILE) prefix missing from size invocation   Tony Lindgren
• [PATCH v3 2/4] ARM: pxa168: Add SDHCI support   Chris Ball
• [RFC PATCH] ARM: vmlinux.lds.S: do not hardcode cacheline size as 32 bytes   Will Deacon
• Very sparse and high interrupt map with SPARSE_IRQ   Rob Herring
• [PATCH v4 REPOST 2/5] ARM: SMP: Refactor Kconfig to be more maintainable   David Brown
• [PATCH v4 4/4] OMAP3/4: iommu: adapt to runtime pm   Felipe Contreras
• [PATCH v4 1/4] OMAP3: hwmod data: add mmu data for iva and isp   Felipe Contreras
• [PATCH v4 3/4] OMAP3/4: iommu: migrate to hwmod framework   Felipe Contreras
• [PATCH v4 4/4] OMAP3/4: iommu: adapt to runtime pm   Felipe Contreras
• [PATCH 0/6] ARM: at91: irqdomain and device tree for AIC and GPIO   Rob Herring
• [PATCH v4 1/4] OMAP3: hwmod data: add mmu data for iva and isp   Ramirez Luna, Omar
• [PATCH v2] [RESEND] Handle instruction cache maintenance fault properly   Kirill A. Shutemov
• [RFC V1 2/4] dts/imx6q: add cpufreq property   Richard Zhao
• [PATCH v4 4/4] OMAP3/4: iommu: adapt to runtime pm   Ramirez Luna, Omar
• [RFC V1 1/4] cpufreq: add arm soc generic cpufreq driver   Richard Zhao
• [RFC V1 1/4] cpufreq: add arm soc generic cpufreq driver   Richard Zhao
• [PATCH v4 4/4] OMAP3/4: iommu: adapt to runtime pm   Ramirez Luna, Omar
• [PATCH] arm/dts: Add minimal device tree support for omap2420 and omap2430   Rajendra Nayak
• [PATCHv12 0/9] OMAP3+: PRCM chain handler   Paul Walmsley
• [PATCH 23/23] ARM: move VMALLOC_END down temporarily for shmobile   Magnus Damm
• [RFC PATCH v2 1/8] omap4: introduce fdif(face detect module) hwmod   Paul Walmsley
• [GIT PULL] at91: drivers for 3.3   Olof Johansson
• [PATCH] arm/dts: Add support for OMAP3 Mistral EVM board   Vaibhav Hiremath
• [PATCH v3] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit   Lauri Hintsala
• [PATCH] ARM: PL330: Fix driver freeze   Jassi Brar
• [PATCH v3] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit   Shawn Guo
• [PATCH] arm/dts: Add support for OMAP3 Mistral EVM board   Hiremath, Vaibhav
• [PATCH-V1] arm/dts: Add support for TI OMAP3 EVM board   Vaibhav Hiremath
• [GIT PULL] at91: devices and boards files update for 3.3   Olof Johansson
• [GIT PULL] DaVinci features for v3.3   Olof Johansson
• [GIT PULL] SoC changes for omap4470, ti814x, am33xx for v3.3 merge window   Olof Johansson
• [GIT PULL] omap musb platform init updates for v3.3 merge window   Olof Johansson
• [GIT PULL] omap board changes for v3.3 merge window   Olof Johansson
• [GIT PULL] imx6/boards for v3.3   Olof Johansson
• [GIT PULL] at91 defconfigs for 3.3   Olof Johansson
• [GIT PULL] two omap fixes for v3.2-rc5   Olof Johansson
• [PATCH v9 00/31] gpio/omap: driver cleanup and fixes   Shilimkar, Santosh
• [GIT PULL] Samsung fixes-3 for v3.2   Kukjin Kim
• [GIT PULL] Samsung fixes-3 for v3.2   Olof Johansson
• [GIT PULL] Samsung devel-1 for v3.3   Kukjin Kim
• [PATCH] ARM: OMAP AM3517/3505: fix crash on boot due to incorrect voltagedomain data   Paul Walmsley
• [PATCH v2] ARM: OMAP3: hwmod data: disable multiblock reads on MMC1/2 on OMAP34xx/35xx <= ES2.1   Paul Walmsley
• [GIT PULL] ARM: OMAP3: hwmod data fixes for 3.2-rc   Paul Walmsley
• [PATCH v9 00/31] gpio/omap: driver cleanup and fixes   DebBarma, Tarun Kanti
• [RFC V1 1/4] cpufreq: add arm soc generic cpufreq driver   Russell King - ARM Linux
• [PATCH 1/4] ARM: EXYNOS4: Add DMC1, allow PPMU access for DMC.   Kyungmin Park
• [PATCHv8 1/5] OMAP3+: HWMOD: Add the default clockactivity for I2C   Paul Walmsley
• [PATCHv8 3/5] OMAP: I2C: Reset support   Paul Walmsley
• [PATCHv8 4/5] OMAP: I2C: Remove the reset in the init path   Paul Walmsley
• [PATCHv8 5/5] OMAP: I2C: Remove the SYSC register definition   Paul Walmsley
• [PATCHv8 2/5] OMAP: hwmod/device : add omap_device_reset to reset all the hwmods in the device   Paul Walmsley
• [PATCHv8 3/5] OMAP: I2C: Reset support   Cousson, Benoit
• [PATCHv8 3/5] OMAP: I2C: Reset support   Shubhrajyoti
• [PATCHv8 4/5] OMAP: I2C: Remove the reset in the init path   Shubhrajyoti
• [PATCH] ARM: PL330: Fix driver freeze   Tushar Behera
• [RFC PATCH] ARM: Fix the bug in dcache flush all API.   sricharan
• [PATCH v5 1/5] ARM: l2x0/pl310: Refactor Kconfig to be more maintainable   Shawn Guo
• [GIT PULL] ARM: OMAP: I2C: prepare to use hwmod reset in driver   Paul Walmsley
• [PATCH v5 5/5] imx6q: Remove unconditional dependency on l2x0 L2 cache support   Shawn Guo
• [PATCH v2] [RESEND] Handle instruction cache maintenance fault properly   Uwe Kleine-König
• [PATCH 3/6] ARM: at91/gpio: add DT support   Jamie Iles
• [RFC V1 1/4] cpufreq: add arm soc generic cpufreq driver   Richard Zhao
• [PATCH] ARM: OMAP2+: Fix: Don't wait for the idle status if modulemode is not supported   Paul Walmsley
• [GIT PULL] at91: drivers for 3.3   Nicolas Ferre
• [PATCH] ARM: OMAP2+: Fix: Don't wait for the idle status if modulemode is not supported   Cousson, Benoit
• [PATCH V2 0/4] add arm soc generic cpufreq driver   Richard Zhao
• [PATCH V2 1/4] cpufreq: add arm soc generic cpufreq driver   Richard Zhao
• [PATCH V2 2/4] dts/imx6q: add cpufreq property   Richard Zhao
• [PATCH V2 3/4] arm/imx6q: register arm_clk as cpu to clkdev   Richard Zhao
• [PATCH V2 4/4] arm/imx6q: select ARCH_HAS_CPUFREQ   Richard Zhao
• [PATCH v3] ARM: OMAP2+: hwmod: Add a new state to handle hwmods left enabled at init   Paul Walmsley
• [RFC PATCH] ARM: Fix the bug in dcache flush all API.   Will Deacon
• [PATCH] ARM: Fix cross compilation broken by failing size command   Janusz Krzysztofik
• [PATCH V2 1/4] cpufreq: add arm soc generic cpufreq driver   Jamie Iles
• [RFC PATCH] ARM: Fix the bug in dcache flush all API.   Will Deacon
• [PATCH v3] ARM: OMAP2+: hwmod: Add a new state to handle hwmods left enabled at init   Rajendra Nayak
• [PATCH 3/3] ARM: OMAP: hwmod: Look for hwmod/module level context lost count if supported   Paul Walmsley
• [PATCH 3/3] ARM: OMAP: hwmod: Look for hwmod/module level context lost count if supported   Paul Walmsley
• [GIT PULL] ARM: OMAP3/4: hwmod data changes for 3.3   Paul Walmsley
• [PATCH V2 1/4] cpufreq: add arm soc generic cpufreq driver   Heiko Stübner
• [RFC PATCH] ARM: Fix the bug in dcache flush all API.   Will Deacon
• [RFC PATCH] ARM: Fix the bug in dcache flush all API.   Will Deacon
• [RFC PATCH] ARM: Fix the bug in dcache flush all API.   Will Deacon
• [GIT PULL] ARM: OMAP: EHCI/OHCI: convert to runtime PM   Paul Walmsley
• [PATCH] ARM: OMAP4: clock: Add CPU local timer clock node   Paul Walmsley
• [PATCH 3/3] ARM: OMAP: hwmod: Look for hwmod/module level context lost count if supported   Rajendra Nayak
• [PATCH 3/3] ARM: OMAP: hwmod: Look for hwmod/module level context lost count if supported   Rajendra Nayak
• [PATCH 3/3] ARM: OMAP: hwmod: Look for hwmod/module level context lost count if supported   Paul Walmsley
• [PATCH] iommu: Initialize domain->handler in iommu_domain_alloc()   KyongHo Cho
• [PATCH 3/3] ARM: OMAP: hwmod: Look for hwmod/module level context lost count if supported   Paul Walmsley
• [PATCH 3/3] ARM: OMAP: hwmod: Look for hwmod/module level context lost count if supported   Rajendra Nayak
• [PATCH v4] ARM: OMAP2+: hwmod: Add a new flag to handle hwmods left enabled at init   Paul Walmsley
• [PATCH v2] ARM: OMAP4: hwmod: Don't wait for the idle status if modulemode is not supported   Paul Walmsley
• [PATCHv12 0/9] OMAP3+: PRCM chain handler   Tero Kristo
• [GIT PULL] ARM: OMAP2+: PRCM: add chained PRCM interrupt handler   Paul Walmsley
• [QUESTION] How to set static/dynamic dependency between clock domains   Ming Lei
• [QUESTION] How to set static/dynamic dependency between clock domains   Ming Lei
• [PATCH] iommu: Initialize domain->handler in iommu_domain_alloc()   'Joerg Roedel'
• [PATCH v6 01/11] davinci: vpif: remove obsolete header file inclusion   Hadli, Manjunath
• [GIT PULL] DaVinci cleanup for v3.3   Arnd Bergmann
• [PATCH V2 1/4] cpufreq: add arm soc generic cpufreq driver   Rob Herring
• [GIT PULL v2] at91: drivers for 3.3   Arnd Bergmann
• [PATCH 1/4] cpupower: Add cpupower-idle-info manpage   Thomas Renninger
• [RFC PATCH v2 1/8] omap4: introduce fdif(face detect module) hwmod   Cousson, Benoit
• [QUESTION] How to set static/dynamic dependency between clock domains   Shilimkar, Santosh
• [PATCH v3 4/4] ARM: omap: pass minimal SoC/board data for UART from dt   Cousson, Benoit
• [GIT PULL] Samsung devel-1 for v3.3   Arnd Bergmann
• [PATCH 1/3] ARM: OMAP2+: kconfig: Enable devicetree by default for OMAP2+ systems   Cousson, Benoit
• [PATCH v2 2/2] [RFC] ARM: IOMMU: Tegra30: iommu_ops for SMMU driver   Joerg Roedel
• [GIT PULL] arm-soc fixes for 3.2, part 4   Arnd Bergmann
• [Xen-devel] [ANNOUNCE] Xen port to Cortex-A15 / ARMv7 with virt extensions   David Vrabel
• [QUESTION] How to set static/dynamic dependency between clock domains   Ming Lei
• [QUESTION] How to set static/dynamic dependency between clock domains   Shilimkar, Santosh
• [QUESTION] How to set static/dynamic dependency between clock domains   Ming Lei
• [PATCH] dmaengine: Add support for MEMCPY for imx-dma.   Javier Martin
• [QUESTION] How to set static/dynamic dependency between clock domains   Shilimkar, Santosh
• [PATCH 1/4] cpupower: Add cpupower-idle-info manpage   Jean Pihet
• Bad page state BUG triggered by init process (kernel 3.1.2)   Bruce Stenning
• [PATCH 0/6] ARM: at91: irqdomain and device tree for AIC and GPIO   Nicolas Ferre
• [QUESTION] How to set static/dynamic dependency between clock domains   Ming Lei
• [PATCH v5 REPOST 0/5] Refactor common Kconfigs for easier maintenance   Dave Martin
• [PATCH v5 REPOST 1/5] ARM: l2x0/pl310: Refactor Kconfig to be more maintainable   Dave Martin
• [PATCH v5 REPOST 2/5] ARM: SMP: Refactor Kconfig to be more maintainable   Dave Martin
• [PATCH v5 REPOST 3/5] omap4: Unconditionally require l2x0 L2 cache controller support   Dave Martin
• [PATCH v5 REPOST 4/5] highbank: Unconditionally require l2x0 L2 cache controller support   Dave Martin
• [PATCH v5 REPOST 5/5] imx6q: Remove unconditional dependency on l2x0 L2 cache support   Dave Martin
• [PATCH V2 3/4] arm/imx6q: register arm_clk as cpu to clkdev   Mark Langsdorf
• [GIT PULL] at91: devices and boards files update for 3.3   Nicolas Ferre
• [PATCH v2] ARM: OMAP3: hwmod data: disable multiblock reads on MMC1/2 on OMAP34xx/35xx <= ES2.1   Steve Sakoman
• [Xen-devel] [ANNOUNCE] Xen port to Cortex-A15 / ARMv7 with virt extensions   Catalin Marinas
• [PATCHv8 3/5] OMAP: I2C: Reset support   Tony Lindgren
• [Xen-devel] [ANNOUNCE] Xen port to Cortex-A15 / ARMv7 with virt extensions   David Vrabel
• [Xen-devel] [ANNOUNCE] Xen port to Cortex-A15 / ARMv7 with virt extensions   Catalin Marinas
• [PATCH v4] ARM: OMAP2+: hwmod: Add a new flag to handle hwmods left enabled at init   Tony Lindgren
• [GIT PULL] OMAP: UART cleanup and runtime PM conversion for v3.3   Tony Lindgren
• [PATCH] ARM: OMAP AM3517/3505: fix crash on boot due to incorrect voltagedomain data   Tony Lindgren
• [PATCH] ARM: OMAP4: clock: Add CPU local timer clock node   Tony Lindgren
• [GIT PULL] ARM: OMAP3: hwmod data fixes for 3.2-rc   Tony Lindgren
• [PATCH v2] ARM: OMAP4: hwmod: Don't wait for the idle status if modulemode is not supported   Tony Lindgren
• [GIT PULL] ARM: OMAP3/4: hwmod data changes for 3.3   Tony Lindgren
• [GIT PULL] ARM: OMAP: EHCI/OHCI: convert to runtime PM   Tony Lindgren
• [GIT PULL] ARM: OMAP2+: PRCM: add chained PRCM interrupt handler   Tony Lindgren
• [GIT PULL] ARM: OMAP: I2C: prepare to use hwmod reset in driver   Tony Lindgren
• [PATCH V2 1/4] cpufreq: add arm soc generic cpufreq driver   Bryan Huntsman
• [GIT PULL] ARM: OMAP: I2C: prepare to use hwmod reset in driver   Paul Walmsley
• Bad page state BUG triggered by init process (kernel 3.1.2)   Russell King - ARM Linux
• [GIT PULL] ARM: OMAP: I2C: prepare to use hwmod reset in driver   Tony Lindgren
• [GIT PULL] ARM: OMAP: I2C: prepare to use hwmod reset in driver   Paul Walmsley
• [GIT PULL] at91: devices and boards files update for 3.3   Olof Johansson
• [RFC V2 1/8] clk: pass parent rate if recalc_rate is NULL   Mike Turquette
• [PATCH v3 0/4] OMAP serial device tree support   Tony Lindgren
• [PATCH v3 0/4] OMAP serial device tree support   Rob Herring
• [PATCH v3 0/4] OMAP serial device tree support   Tony Lindgren
• [PATCH 0/9] arm/tegra: Various pinmux-related cleanups   Stephen Warren
• [PATCH 1/9] arm/tegra: Split Seaboard GPIO table to allow for Ventana   Stephen Warren
• [PATCH 2/9] arm/tegra: Add AUXDATA for tegra-pinmux and tegra-gpio   Stephen Warren
• [PATCH 3/9] arm/tegra: Harmony PCIe: Don't touch pinmux   Stephen Warren
• [PATCH 4/9] arm/tegra: PCIe: Remove include of mach/pinmux.h   Stephen Warren
• [PATCH 5/9] arm/tegra: Remove useless entries from ventana_pinmux[]   Stephen Warren
• [PATCH 6/9] arm/tegra: Rework Seaboard-vs-Ventana pinmux table   Stephen Warren
• [PATCH 7/9] arm/tegra: Fix mistake in Trimslice's pinmux   Stephen Warren
• [PATCH 8/9] arm/tegra: Refactor board-*-pinmux.c to share code   Stephen Warren
• [PATCH 9/9] arm/tegra: Use bus notifiers to trigger pinmux setup   Stephen Warren
• [PATCH v3 0/4] OMAP serial device tree support   Tony Lindgren
• [RFC V2 4/8] ARM i.MX: Add generic support for pllv2   Mike Turquette
• [RFC V2 5/8] ARM i.MX: clk: add generic support of gate2b   Mike Turquette
• [RFC V2 6/8] ARM i.MX: prepare common clk support   Mike Turquette
• [PATCH 1/3] ARM: OMAP2+: kconfig: Enable devicetree by default for OMAP2+ systems   Tony Lindgren
• [GIT PULL] ARM: OMAP: I2C: prepare to use hwmod reset in driver   Tony Lindgren
• [PATCH] ARM: Fix cross compilation broken by failing size command   Tony Lindgren
• [PATCH 2/2] OMAP4: mcbsp: Clock reparenting support   Paul Walmsley
• [PATCH v4 3/6] clk: introduce the common clock framework   Turquette, Mike
• [PATCH v4 5/6] clk: basic gateable and fixed-rate clks   Turquette, Mike
• [PATCH v2 2/2] [RFC] ARM: IOMMU: Tegra30: iommu_ops for SMMU driver   Hiroshi Doyu
• [PATCH v2 1/2] [RFC] ARM: IOMMU: Tegra20: iommu_ops for GART driver   Hiroshi Doyu
• [PATCH v2 2/2] [RFC] ARM: IOMMU: Tegra30: iommu_ops for SMMU driver   Hiroshi Doyu
• [PATCH v4 4/4] OMAP3/4: iommu: adapt to runtime pm   Tony Lindgren
• buggy usage of pm_idle by omap1 code   Nicolas Pitre
• [RFC V2 4/8] ARM i.MX: Add generic support for pllv2   Richard Zhao
• [PATCH V2 3/4] arm/imx6q: register arm_clk as cpu to clkdev   Richard Zhao
• [PATCH V2 1/4] cpufreq: add arm soc generic cpufreq driver   Richard Zhao
• [PATCH V2 1/4] cpufreq: add arm soc generic cpufreq driver   Richard Zhao
• [PATCH V2 1/4] cpufreq: add arm soc generic cpufreq driver   Richard Zhao
• [PATCH V2 1/4] cpufreq: add arm soc generic cpufreq driver   Richard Zhao
• [PATCH 1/4] cpupower: Add cpupower-idle-info manpage   Thomas Renninger
• [PATCH V2 1/4] cpufreq: add arm soc generic cpufreq driver   Arnd Bergmann
• [PATCH v4] arm: omap3evm: Add support for an MT9M032 based camera board.   Martin Hostettler
• [PATCH] ARM: Fix cross compilation broken by failing size command   Russell King - ARM Linux
• [PATCH v4 3/6] clk: introduce the common clock framework   Russell King - ARM Linux
• [PATCH] mioa701: add newly available DoC G3 chip   Robert Jarzmik
• [PATCH] ARM: Fix cross compilation broken by failing size command   Janusz Krzysztofik
• [PATCHv2 0/5] Misc picoxcell updates for 3.3   Jamie Iles
• [PATCHv2 1/5] ARM: picoxcell: remove mach/memory.h   Jamie Iles
• [PATCHv2 2/5] ARM: picoxcell: don't reserve irq_descs   Jamie Iles
• [PATCHv2 3/5] ARM: picoxcell: move io mappings to common.c   Jamie Iles
• [PATCHv2 4/5] MAINTAINERS: add maintainer entry for Picochip picoxcell   Jamie Iles
• [PATCHv2 5/5] ARM: picoxcell: implement watchdog restart   Jamie Iles
• [PATCH 1/2] MTD: atmel_nand: Update Kconfig to support PMECC   Artem Bityutskiy
• [PATCH] ARM: Fix cross compilation broken by failing size command   Nicolas Pitre
• [PATCH 23/23] ARM: move VMALLOC_END down temporarily for shmobile   Nicolas Pitre
• label string for kirkwood gpiochip   Nicolas Pitre
• [PATCH] ARM: Fix cross compilation broken by failing size command   Russell King - ARM Linux
• [GIT PULL] at91: devices and boards files update for 3.3   Guennadi Liakhovetski
• [PATCH] ARM: Fix cross compilation broken by failing size command   Janusz Krzysztofik
• [PATCH v2 0/7] s3c-hsudc: regulator handling and a lot of fixes   Heiko Stübner
• [PATCH 1/7] s3c-hsudc: move platform_data struct to global header   Heiko Stübner
• [PATCH 2/7] s3c-hsudc: add __devinit to probe function   Heiko Stübner
• [PATCH 3/7] s3c-hsudc: add a remove function   Heiko Stübner
• [PATCH 4/7] s3c-hsudc: add missing otg_put_transceiver in probe   Heiko Stübner
• [PATCH 5/7] s3c-hsudc: move device registration to probe and remove   Heiko Stübner
• [PATCH 6/7] s3c-hsudc: use udc_start and udc_stop functions   Heiko Stübner
• [PATCH 7/7] s3c-hsudc: Add regulator handling   Heiko Stübner
• [PATCHv2 5/5] ARM: picoxcell: implement watchdog restart   Arnd Bergmann
• [PATCHv2 0/5] Misc picoxcell updates for 3.3   Arnd Bergmann
• [GIT PULL] at91: devices and boards files update for 3.3   Olof Johansson
• [PATCHv2 5/5] ARM: picoxcell: implement watchdog restart   Jamie Iles
• [GIT PULL] at91: devices and boards files update for 3.3   Guennadi Liakhovetski
• [PATCH] ARM: OMAP: fix erroneous mmc2 clock change on mmc3 setup   Grazvydas Ignotas
• [PATCH 0/9] arm/tegra: Various pinmux-related cleanups   Olof Johansson
• [PATCH v4 2/5] ARM: SMP: Refactor Kconfig to be more maintainable   Olof Johansson
• [PATCH v5 1/5] ARM: l2x0/pl310: Refactor Kconfig to be more maintainable   Olof Johansson
• [PATCH] arm/tegra: refresh defconfig for tegra30   Olof Johansson
• [PATCH v7 00/14] Add support for tegra30 and cardhu   Olof Johansson
• [PATCH] arm/tegra: Seaboard: Add GPIO key device tree nodes   Stephen Warren
• [PATCH 1/3] i2c: tegra: Support DVC controller in device tree   Stephen Warren
• [PATCH 2/3] arm/dt: tegra: Use new compatible value for DVC I2C controller   Stephen Warren
• [PATCH 3/3] arm/dt: Add ADT7461 to Seaboard   Stephen Warren
• [PATCH 1/3] i2c: tegra: Support DVC controller in device tree   Olof Johansson
• [PATCH V2 1/4] i2c: tegra: Add __devinit/exit to probe/remove   Stephen Warren
• [PATCH V2 2/4] i2c: tegra: Support DVC controller in device tree   Stephen Warren
• [PATCH V2 3/4] arm/dt: tegra: Use new compatible value for DVC I2C controller   Stephen Warren
• [PATCH V2 4/4] arm/dt: Add ADT7461 to Seaboard   Stephen Warren
• [RFC V2 6/8] ARM i.MX: prepare common clk support   Richard Zhao
• [GIT PULL] ARM: OMAP: I2C: prepare to use hwmod reset in driver   Shubhrajyoti
• [PATCH 3/7] s3c-hsudc: add a remove function   Russell King - ARM Linux
• [RFC V2 5/8] ARM i.MX: clk: add generic support of gate2b   Richard Zhao
• [PATCH 5/7] s3c-hsudc: move device registration to probe and remove   Russell King - ARM Linux
• [PATCH 3/7] s3c-hsudc: add a remove function   Russell King - ARM Linux
• [PATCHv2 5/5] ARM: picoxcell: implement watchdog restart   Russell King - ARM Linux
• [PATCHv2 5/5] ARM: picoxcell: implement watchdog restart   Jamie Iles
• [PATCH 3/7] s3c-hsudc: add a remove function   Heiko Stübner
• [PATCH 1/2] gpio: add a driver for the Synopsys DesignWare APB GPIO block   Jamie Iles
• [PATCH 2/2] ARM: picoxcell: use new Synopsys Designware GPIO binding   Jamie Iles
• [GIT PULL] picoxcell cleanups for 3.3   Jamie Iles
• [GIT PULL] picoxcell features for 3.3   Jamie Iles
• arm and patch phys offset   Tixy
• [PATCH V2 1/4] cpufreq: add arm soc generic cpufreq driver   Richard Zhao
• [PATCH 3/7] s3c-hsudc: add a remove function   Heiko Stübner
• [PATCH] MXS: Convert mutexes in clock.c to spinlocks   Marek Vasut
• [PATCH 3/7] s3c-hsudc: add a remove function   Russell King - ARM Linux
• [PATCH 1/3] i2c: tegra: Support DVC controller in device tree   Thierry Reding
• [PATCH 1/3] i2c: tegra: Support DVC controller in device tree   Thierry Reding
• [GIT PULL] Samsung devel-1 for v3.3   Kukjin Kim
• [PATCH v5 REPOST 1/5] ARM: l2x0/pl310: Refactor Kconfig to be more maintainable   Kukjin Kim
• [PATCH v5 REPOST 2/5] ARM: SMP: Refactor Kconfig to be more maintainable   Kukjin Kim
• [PATCH 1/4] ARM: EXYNOS4: Add DMC1, allow PPMU access for DMC.   Kukjin Kim
• [PATCH v7 0/2] iommu/exynos: Add IOMMU/System MMU driver for Samsung Exynos   Kukjin Kim
• [PATCH 1/2] imx: Add save/restore functions for UART control regs   Dirk Behme
• [PATCH 2/2 v2] imx: add polled io uart methods   Dirk Behme
• [PATCH v7 0/2] iommu/exynos: Add IOMMU/System MMU driver for Samsung Exynos   'Joerg Roedel'
• [PATCH] GPIO: sa1100: implement proper gpiolib gpio_to_irq conversion   Russell King - ARM Linux
• [PATCH 3/7] s3c-hsudc: add a remove function   Heiko Stübner
• [PATCH 3/7] s3c-hsudc: add a remove function   Russell King - ARM Linux
• [PATCH] ARM: OMAP: avoid NULL pointer dereference when no PMIC is configured   Daniel Mack
• [PATCH 3/7] s3c-hsudc: add a remove function   Heiko Stübner
• [PATCH 3/7] s3c-hsudc: add a remove function   Russell King - ARM Linux
• [PATCH 3/7] s3c-hsudc: add a remove function   Heiko Stübner
• [PATCH 3/7] s3c-hsudc: add a remove function   Russell King - ARM Linux
• [PATCH 3/7] s3c-hsudc: add a remove function   Heiko Stübner
• [PATCH] mfd: max8998: Use standard device wakeup for handling wakeup device   Samuel Ortiz
• [PATCH 3/7] s3c-hsudc: add a remove function   Russell King - ARM Linux
• [PATCH 1/2] gpio: add a driver for the Synopsys DesignWare APB GPIO block   Linus Walleij
• [PATCH 02/14] mmc: mmci: Fixup handling of MCI_STARTBITERR   Russell King - ARM Linux
• [PATCH 08/14] mmc: mmci: Fixup error handling for dma   Russell King - ARM Linux
• [PATCH] GPIO: sa1100: implement proper gpiolib gpio_to_irq conversion   Linus Walleij
• [PATCH] ux500: fix the smp_twd clock calculation   Linus Walleij
• [PATCH] ARM: net: JIT compiler for packet filters   Mircea Gherzan
• linux-next: manual merge of the arm-soc tree with the arm tree   Stephen Rothwell
• linux-next: manual merge of the arm-soc tree with the arm tree   Stephen Rothwell
• [PATCH 1/2] gpio: add a driver for the Synopsys DesignWare APB GPIO block   Jamie Iles
• [PATCH v2] video: support MIPI-DSI controller driver   Florian Tobias Schandinat
• [PATCH V2 1/4] cpufreq: add arm soc generic cpufreq driver   Richard Zhao
• linux-next: manual merge of the arm-soc tree with the arm tree   Shawn Guo
• [PATCH 1/2] MTD: atmel_nand: Update Kconfig to support PMECC   Hong Xu
• [RFC] virtio: use mandatory barriers for remote processor vdevs   Amos Kong
• [PATCH] ARM: net: JIT compiler for packet filters   Ben Hutchings
• [RFC] virtio: use mandatory barriers for remote processor vdevs   Rusty Russell
• [RFC] virtio: use mandatory barriers for remote processor vdevs   Benjamin Herrenschmidt
• [PATCH] ARM: net: JIT compiler for packet filters   Rob Herring
• [RFC] virtio: use mandatory barriers for remote processor vdevs   Amos Kong
• [PATCH 1/2] gpio: add a driver for the Synopsys DesignWare APB GPIO block   Rob Herring
• [PATCH V3 0/7] add a generic cpufreq driver   Richard Zhao
• [PATCH V3 1/7] ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp   Richard Zhao
• [PATCH V3 2/7] arm/imx: cpufreq: remove loops_per_jiffy recalculate for smp   Richard Zhao
• [PATCH V3 3/7] cpufreq: OMAP: remove loops_per_jiffy recalculate for smp   Richard Zhao
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Richard Zhao
• [PATCH V3 5/7] dts/imx6q: add cpufreq property   Richard Zhao
• [PATCH V3 6/7] arm/imx6q: register arm_clk as cpu to clkdev   Richard Zhao
• [PATCH V3 7/7] arm/imx6q: select ARCH_HAS_CPUFREQ   Richard Zhao
• [PATCH] ARM:imx:fix pwm period value   Jason Chen
• [PATCH] MXS: Convert mutexes in clock.c to spinlocks   Shawn Guo
• [PATCH 1/2] imx: Add save/restore functions for UART control regs   Shawn Guo
• [PATCH 2/2 v2] imx: add polled io uart methods   Shawn Guo
• serial tty name   Shawn Guo
• [PATCH] MXS: Convert mutexes in clock.c to spinlocks   Marek Vasut
• [PATCH] mioa701: add newly available DoC G3 chip   Haojian Zhuang
• serial tty name   Shawn Guo
• [PATCH v3 2/4] ARM: pxa168: Add SDHCI support   Haojian Zhuang
• serial tty name   Jason Liu
• [PATCH v3 2/4] ARM: pxa168: Add SDHCI support   Tanmay Upadhyay
• [PATCH v3 2/4] ARM: pxa168: Add SDHCI support   Haojian Zhuang
• [PATCH v3 2/4] ARM: pxa168: Add SDHCI support   Tanmay Upadhyay
• [PATCH v3 2/4] ARM: pxa168: Add SDHCI support   Haojian Zhuang
• [PATCH v3 2/4] ARM: pxa168: Add SDHCI support   Philip Rakity
• [PATCH v3 2/4] ARM: pxa168: Add SDHCI support   Haojian Zhuang
• serial tty name   Richard Zhao
• serial tty name   Richard Zhao
• serial tty name   Shawn Guo
• [Linaro-mm-sig] [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Semwal, Sumit
• [QUESTION] How to set static/dynamic dependency between clock domains   Shilimkar, Santosh
• [PATCH v2] video: support MIPI-DSI controller driver   Donghwa Lee
• [PATCH v2 1/2] [RFC] ARM: IOMMU: Tegra20: iommu_ops for GART driver   Hiroshi Doyu
• [PATCH 1/2] imx: Add save/restore functions for UART control regs   Dirk Behme
• [PATCH V2 1/4] i2c: tegra: Add __devinit/exit to probe/remove   Shubhrajyoti Datta
• [PATCH v3] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit   Lauri Hintsala
• [PATCH v3] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit   Shawn Guo
• [PATCH 1/2] imx: Add save/restore functions for UART control regs   Shawn Guo
• [RFC] virtio: use mandatory barriers for remote processor vdevs   Amos Kong
• [PATCH] mioa701: add newly available DoC G3 chip   Robert Jarzmik
• [PATCH] ARM: OMAP: avoid NULL pointer dereference when no PMIC is configured   Igor Grinberg
• [GIT PULL] DaVinci cleanup for v3.3   Nori, Sekhar
• [PATCH] MXS: Convert mutexes in clock.c to spinlocks   Russell King - ARM Linux
• [PATCH] ARM: Fix cross compilation broken by failing size command   Igor Grinberg
• [RFC v3 0/2] Introduce DMA buffer sharing mechanism   Sumit Semwal
• [RFC] virtio: use mandatory barriers for remote processor vdevs   Rusty Russell
• [PATCH v2] ARM: net: JIT compiler for packet filters   Mircea Gherzan
• [PATCH 02/14] mmc: mmci: Fixup handling of MCI_STARTBITERR   Ulf Hansson
• [PATCH 08/14] mmc: mmci: Fixup error handling for dma   Ulf Hansson
• [PATCH v3] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit   Russell King - ARM Linux
• [PATCH v3] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit   Russell King - ARM Linux
• [PATCH v3] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit   Shawn Guo
• [PATCH v3] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit   Lauri Hintsala
• [PATCH v3] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit   Shawn Guo
• [PATCH 00/20] arch_idle() cleanup and mach/system.h removal   Nicolas Pitre
• [PATCH 01/20] ARM: clean up idle handlers   Nicolas Pitre
• [PATCH 02/20] ARM: mach-s5pv210: use standard arch_idle()   Nicolas Pitre
• [PATCH 03/20] ARM: mach-s5pc100: use standard arch_idle()   Nicolas Pitre
• [PATCH 04/20] ARM: mach-exynos: use standard arch_idle()   Nicolas Pitre
• [PATCH 05/20] ARM: mach-at91: move special idle code out of line   Nicolas Pitre
• [PATCH 06/20] ARM: mach-clps711x: move special idle code out of line   Nicolas Pitre
• [PATCH 07/20] ARM: mach-ebsa110: move special idle code out of line   Nicolas Pitre
• [PATCH 08/20] ARM: mach-gemini: move special idle code out of line   Nicolas Pitre
• [PATCH 09/20] ARM: mach-h720x: move special idle code out of line   Nicolas Pitre
• [PATCH 10/20] ARM: s3c24xx: move special idle code to out of line   Nicolas Pitre
• [PATCH 11/20] ARM: plat-mxc: hook special idle handlers to arm_pm_idle   Nicolas Pitre
• [PATCH 12/20] ARM: mach-msm: hook special idle handlers to arm_pm_idle   Nicolas Pitre
• [PATCH 13/20] ARM: mach-ixp23xx: properly disable CPU idle call   Nicolas Pitre
• [PATCH 14/20] ARM: mach-ixp4xx: properly disable CPU idle call   Nicolas Pitre
• [PATCH 15/20] ARM: mach-shark: properly disable CPU idle call   Nicolas Pitre
• [PATCH 16/20] ARM: mach-w90x900: properly disable CPU idle call   Nicolas Pitre
• [PATCH 17/20] ARM: mach-s3c64xx: properly disable CPU idle call   Nicolas Pitre
• [PATCH 18/20] ARM: mach-tegra: properly disable CPU idle call   Nicolas Pitre
• [PATCH 19/20] ARM: substitute arch_idle()   Nicolas Pitre
• [PATCH 20/20] ARM: big removal of now unused arch_reset()   Nicolas Pitre
• [PATCH 1/2] gpio: add a driver for the Synopsys DesignWare APB GPIO block   Jamie Iles
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Jamie Iles
• [PATCH 1/2] imx: Add save/restore functions for UART control regs   Sascha Hauer
• [PATCH v5 REPOST 1/5] ARM: l2x0/pl310: Refactor Kconfig to be more maintainable   Sascha Hauer
• [PATCH v5 REPOST 2/5] ARM: SMP: Refactor Kconfig to be more maintainable   Sascha Hauer
• [PATCH v5 REPOST 5/5] imx6q: Remove unconditional dependency on l2x0 L2 cache support   Sascha Hauer
• Fwd: Re: [03: PATCH 0/5] The remaining stuff   Russell King - ARM Linux
• [PATCH v3] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit   Veli-Pekka Peltola
• [GIT PULL]   Sascha Hauer
• [PATCH] [ARM] APF9328 needs CONFIG_MTD_CFI_INTELEXT to boot on its NOR FLASH.   gwenhael.goavec
• [PATCH] ARM: S3C64XX: Added common.c and common.h for S3C64XX SoCs   Kukjin Kim
• [PATCH] MXS: Convert mutexes in clock.c to spinlocks   Marek Vasut
• [PATCH] ARM: restart: S3C64XX: use new restart hook   Kukjin Kim
• [PATCH v2 03/10] mfd: twl-core: Add initial DT support for twl4030/twl6030   Samuel Ortiz
• [PATCH] ARM: restart: S3C64XX: use new restart hook   Heiko Stübner
• [PATCH] MXS: Convert mutexes in clock.c to spinlocks   Russell King - ARM Linux
• [PATCH] ARM: restart: S3C64XX: use new restart hook   Kukjin Kim
• [PATCH v7 00/14] Add support for tegra30 and cardhu   Peter De Schrijver
• [PATCH] ARM: restart: move SWRST based S3C platforms to machine_desc hook   Heiko Stübner
• [PATCH 2/9] irq: check domain hwirq range for DT translate   Cousson, Benoit
• [PATCH] ARM: restart: move SWRST based S3C platforms to machine_desc hook   Kukjin Kim
• [PATCH v2] ARM: net: JIT compiler for packet filters   Dave Martin
• [PATCH] ARM: restart: move SWRST based S3C platforms to machine_desc hook   Heiko Stübner
• [PATCH v3 0/7] s3c-hsudc: regulator handling and a lot of fixes   Heiko Stübner
• [GIT PULL] ARM: amba: Enable module alias autogeneration for AMBA drivers   Dave Martin
• [PATCH 1/7] s3c-hsudc: move platform_data struct to global header   Heiko Stübner
• [PATCH 2/7] s3c-hsudc: add __devinit to probe function   Heiko Stübner
• [PATCH 3/7] s3c-hsudc: add missing otg_put_transceiver in probe   Heiko Stübner
• [PATCH 4/7] s3c-hsudc: move device registration to probe   Heiko Stübner
• [PATCH 5/7] s3c-hsudc: use udc_start and udc_stop functions   Heiko Stübner
• [PATCH 6/7] s3c-hsudc: Add regulator handling   Heiko Stübner
• [PATCH 7/7] s3c-hsudc: use release_mem_region instead of release_resource   Heiko Stübner
• [PATCH 1/7] s3c-hsudc: move platform_data struct to global header   Felipe Balbi
• [PATCH 2/7] s3c-hsudc: add __devinit to probe function   Felipe Balbi
• [PATCH 5/7] s3c-hsudc: use udc_start and udc_stop functions   Felipe Balbi
• Fw: [GIT PULL] Refactor common Kconfigs for easier maintenance   Dave Martin
• [PATCH 0/3] of: Add support for named irq and reg   Cousson, Benoit
• [PATCH v2 03/10] mfd: twl-core: Add initial DT support for twl4030/twl6030   Cousson, Benoit
• [PATCH] ARM: restart: S3C64XX: use new restart hook   Russell King - ARM Linux
• [PATCH 1/3] of/base: Take NULL string into account for property with multiple strings   Rob Herring
• [RFC v2 PATCH 0/3] dt: device tree bindings and data for EMIF and DDR   Aneesh V
• [RFC v2 PATCH 1/3] dt: device tree bindings for DDR memories   Aneesh V
• [RFC v2 PATCH 2/3] dt: device tree bindings for TI's EMIF sdram controller   Aneesh V
• [RFC v2 PATCH 3/3] arm/dts: EMIF and lpddr2 device tree data for OMAP4 boards   Aneesh V
• [PATCH v3 2/3] regulator: mc13892: add device tree probe support   Shawn Guo
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Richard Zhao
• [PATCH 2/9] irq: check domain hwirq range for DT translate   Rob Herring
• [PATCH v4] ARM: Add generic instruction opcode manipulation helpers   Dave Martin
• [PATCH] ARM: restart: S3C64XX: use new restart hook   Kukjin Kim
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Jamie Iles
• [RFC PATCH v2 0/6] ARM: Remove the __ARCH_WANT_INTERRUPTS_ON_CTXSW definition   Catalin Marinas
• [RFC PATCH v2 1/6] sched: Introduce the finish_arch_post_lock_switch() scheduler hook   Catalin Marinas
• [RFC PATCH v2 2/6] ARM: Use TTBR1 instead of reserved context ID   Catalin Marinas
• [RFC PATCH v2 3/6] ARM: Allow ASID 0 to be allocated to tasks   Catalin Marinas
• [RFC PATCH v2 4/6] ARM: Remove __ARCH_WANT_INTERRUPTS_ON_CTXSW on ASID-capable CPUs   Catalin Marinas
• [RFC PATCH v2 5/6] ARM: Remove current_mm per-cpu variable   Catalin Marinas
• [RFC PATCH v2 6/6] ARM: Remove __ARCH_WANT_INTERRUPTS_ON_CTXSW on pre-ARMv6 CPUs   Catalin Marinas
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Rob Herring
• [PATCH v2] ARM: net: JIT compiler for packet filters   Uwe Kleine-König
• [PATCH 2/9] irq: check domain hwirq range for DT translate   Cousson, Benoit
• [PATCH v2] ARM: net: JIT compiler for packet filters   Dave Martin
• [PATCH v2] ARM: net: JIT compiler for packet filters   Uwe Kleine-König
• [PATCH v2] ARM: net: JIT compiler for packet filters   Dave Martin
• [PATCH v4 1/4] OMAP3: hwmod data: add mmu data for iva and isp   Felipe Contreras
• [PATCH v4 4/4] OMAP3/4: iommu: adapt to runtime pm   Felipe Contreras
• [GIT PULL] ARM: OMAP: I2C: prepare to use hwmod reset in driver   Cousson, Benoit
• [PATCH v2] ARM: net: JIT compiler for packet filters   Mircea Gherzan
• [PATCH] arm/plat-orion: make gpiochip label unique   Holger Brunck
• [PATCH v2 04/10] rtc: rtc-twl: Add DT support for RTC inside twl4030/twl6030   Cousson, Benoit
• [RFC v2 PATCH 1/3] dt: device tree bindings for DDR memories   Olof Johansson
• [RFC v2 PATCH 2/3] dt: device tree bindings for TI's EMIF sdram controller   Olof Johansson
• [RFC v2 PATCH 2/3] dt: device tree bindings for TI's EMIF sdram controller   Olof Johansson
• [PATCH V2 1/4] i2c: tegra: Add __devinit/exit to probe/remove   Stephen Warren
• [PATCH v4] ARM: Add generic instruction opcode manipulation helpers   Nicolas Pitre
• [PATCH v2] ARM: net: JIT compiler for packet filters   Mircea Gherzan
• [GIT PULL] imx: gpio interrupt cleanup   Stephen Warren
• Status of the following patch (clocksource sched_clock) ?   Karicheri, Muralidharan
• [GIT PULL] imx: gpio interrupt cleanup   Thomas Gleixner
• Status of the following patch (clocksource sched_clock) ?   Russell King - ARM Linux
• [GIT PULL] imx: gpio interrupt cleanup   Jamie Iles
• Status of the following patch (clocksource sched_clock) ?   Karicheri, Muralidharan
• [PATCH] ARM: net: JIT compiler for packet filters   Nicolas Pitre
• buggy usage of pm_idle by omap1 code   Tony Lindgren
• [GIT PULL] ARM: OMAP: I2C: prepare to use hwmod reset in driver   Shubhrajyoti
• Status of the following patch (clocksource sched_clock) ?   Karicheri, Muralidharan
• [PATCH v2] ARM: net: JIT compiler for packet filters   Catalin Marinas
• [GIT PULL] imx: gpio interrupt cleanup   Stephen Warren
• [PATCH V2 1/4] cpufreq: add arm soc generic cpufreq driver   Stephen Boyd
• [PATCH] ARM: net: JIT compiler for packet filters   Nicolas Pitre
• buggy usage of pm_idle by omap1 code   Nicolas Pitre
• [PATCH 0/9] arm/tegra: Various pinmux-related cleanups   Stephen Warren
• [PATCH 08/20] ARM: mach-gemini: move special idle code out of line   Tony Lindgren
• [PATCH 12/20] ARM: mach-msm: hook special idle handlers to arm_pm_idle   Tony Lindgren
• [PATCH 0/2] arm/tegra: Fix section mismatch errors in pinmux   Stephen Warren
• [PATCH 1/2] arm/tegra: Fix section mismatch errors in tegra20 pinmux   Stephen Warren
• [PATCH 2/2] arm/tegra: Fix section mismatch errors in tegra30 pinmux   Stephen Warren
• [PATCH 12/20] ARM: mach-msm: hook special idle handlers to arm_pm_idle   Nicolas Pitre
• [PATCH 20/20] ARM: big removal of now unused arch_reset()   H Hartley Sweeten
• [GIT PULL] imx: gpio interrupt cleanup   Jamie Iles
• [PATCH] arm/plat-orion: make gpiochip label unique (fwd)   Nicolas Pitre
• [PATCH v2] ARM: net: JIT compiler for packet filters   Dave Martin
• [PATCH 20/20] ARM: big removal of now unused arch_reset()   Nicolas Pitre
• [PATCH] arm/tegra: refresh defconfig for tegra30   Stephen Warren
• [PATCH v2] ARM: net: JIT compiler for packet filters   Dave Martin
• [PATCH v4 0/8] s3c-hsudc: regulator handling and a lot of fixes   Heiko Stübner
• [PATCH 1/8] s3c-hsudc: move platform_data struct to global header   Heiko Stübner
• [PATCH 2/8] s3c-hsudc: add __devinit to probe function   Heiko Stübner
• [PATCH 3/8] s3c-hsudc: add missing otg_put_transceiver in probe   Heiko Stübner
• [PATCH 4/8] s3c-hsudc: move device registration to probe   Heiko Stübner
• [PATCH 5/8] s3c-hsudc: use udc_start and udc_stop functions   Heiko Stübner
• [PATCH 6/8] s3c-hsudc: Add regulator handling   Heiko Stübner
• [PATCH 7/8] s3c-hsudc: use release_mem_region instead of release_resource   Heiko Stübner
• [PATCH 8/8] s3c-hsudc: remove the_controller global   Heiko Stübner
• [PATCH 00/20] arch_idle() cleanup and mach/system.h removal   Jamie Iles
• [PATCH 01/20] ARM: clean up idle handlers   Tony Lindgren
• [PATCH 19/20] ARM: substitute arch_idle()   Tony Lindgren
• [PATCH 20/20] ARM: big removal of now unused arch_reset()   Tony Lindgren
• [PATCH 1/3] arm/tegra: Delete tegra_init_clock()   Stephen Warren
• [PATCH 2/3] arm/tegra: Make MACH_TEGRA_DT depend on ARCH_TEGRA_2x_SOC   Stephen Warren
• [PATCH 3/3] arm/tegra: Compile tegra_dt_init_irq only when CONFIG_OF   Stephen Warren
• [PATCH 00/20] arch_idle() cleanup and mach/system.h removal   Nicolas Pitre
• [GIT PULL] Borderline fixes for v3.2-rc6   Tony Lindgren
• [PATCH 01/20] ARM: clean up idle handlers   Nicolas Pitre
• [GIT PULL] omap hwmod changes for v3.3 merge window   Tony Lindgren
• [GIT PULL] omap ehci related changes for v3.3 merge window   Tony Lindgren
• [GIT PULL] omap prcm changes for v3.3 merge window   Tony Lindgren
• [PATCH v6 01/11] davinci: vpif: remove obsolete header file inclusion   Nori, Sekhar
• [GIT PULL] omap uart runtime PM support for v3.2 merge window   Tony Lindgren
• [GIT PULL] Non critical fixes for v3.3 merge window, part2   Tony Lindgren
• [PATCH v2] gpio: pl061: convert to use generic irq chip   Rob Herring
• [PATCH] MXS: Convert mutexes in clock.c to spinlocks   Marek Vasut
• [PATCH v2] gpio: pl061: enable interrupts with DT style binding   Rob Herring
• [PATCH v6 0/6] PM QoS: implement the OMAP low level constraints management code   Paul Walmsley
• [PATCH] MXS: Convert mutexes in clock.c to spinlocks   Russell King - ARM Linux
• [GIT PULL] imx: gpio interrupt cleanup   Stephen Warren
• Status of the following patch (clocksource sched_clock) ?   Russell King - ARM Linux
• [PATCH] MXS: Convert mutexes in clock.c to spinlocks   Marek Vasut
• [PATCH 2/6] OMAP2+: omap_hwmod: manage the wake-up latency constraints   Paul Walmsley
• [PATCH 3/6] OMAP: PM: register to the per-device PM QoS framework   Paul Walmsley
• [PATCH] MXS: Convert mutexes in clock.c to spinlocks   Russell King - ARM Linux
• buggy usage of pm_idle by omap1 code   Russell King - ARM Linux
• [PATCH] MXS: Convert mutexes in clock.c to spinlocks   Marek Vasut
• Status of the following patch (clocksource sched_clock) ?   Karicheri, Muralidharan
• [GIT PULL] ARM: amba: Enable module alias autogeneration for AMBA drivers   Russell King - ARM Linux
• [PATCH] MXS: Convert mutexes in clock.c to spinlocks   Marek Vasut
• [RFC PATCH v2 1/8] omap4: introduce fdif(face detect module) hwmod   Paul Walmsley
• Status of the following patch (clocksource sched_clock) ?   Russell King - ARM Linux
• [GIT PULL] ARM: OMAP3/4: miscellaneous hwmod data updates   Paul Walmsley
• [PATCH V3 10/14] ARM: mxs: add clk_prepare/clk_unprepare   Marek Vasut
• [RFC v2 PATCH 0/3] dt: device tree bindings and data for EMIF and DDR   Rob Herring
• buggy usage of pm_idle by omap1 code   Nicolas Pitre
• [PATCH v2 0/7] ARM: OMAP1: ams-delta: replace custom I/O with GPIO   Janusz Krzysztofik
• [PATCH v2 2/7] ARM: OMAP1: ams-delta: convert latches to basic_mmio_gpio   Janusz Krzysztofik
• [PATCH v2 3/7] ARM: OMAP1: ams-delta: supersede custom led device by leds-gpio   Janusz Krzysztofik
• [PATCH v2 4/7] LED: drop leds-ams-delta driver   Janusz Krzysztofik
• [PATCH v2 5/7] MTD: NAND: ams-delta: use GPIO instead of custom I/O   Janusz Krzysztofik
• [PATCH v2 6/7] omapfb: lcd_ams_delta: drive control lines over GPIO   Janusz Krzysztofik
• [PATCH v2 7/7] input: serio: ams-delta: toggle keyboard power over GPIO   Janusz Krzysztofik
• buggy usage of pm_idle by omap1 code   Tony Lindgren
• [PATCH 12/20] ARM: mach-msm: hook special idle handlers to arm_pm_idle   David Brown
• [PATCH 20/20] ARM: big removal of now unused arch_reset()   David Brown
• buggy usage of pm_idle by omap1 code   Tony Lindgren
• [PATCH] MXS: Convert mutexes in clock.c to spinlocks   Shawn Guo
• [PATCH v2 1/7][RESEND] ARM: OMAP1: ams-delta: register latch dependent devices later   Janusz Krzysztofik
• [PATCH] MXS: Convert mutexes in clock.c to spinlocks   Marek Vasut
• [RFC v2 PATCH 0/3] dt: device tree bindings and data for EMIF and DDR   Tony Lindgren
• [PATCH v2 2/7] ARM: OMAP1: ams-delta: convert latches to basic_mmio_gpio   Tony Lindgren
• [PATCH] MXS: Convert mutexes in clock.c to spinlocks   Shawn Guo
• [PATCH 01/20] ARM: clean up idle handlers   Stephen Warren
• [PATCH 01/10] arm: omap4: fix kconfig warning   Felipe Contreras
• [PATCH 02/10] arm: vexpress: fix kconfig warning   Felipe Contreras
• [PATCH 03/10] arm: omap2: fix omap3 touchbook kconfig warning   Felipe Contreras
• [PATCH 04/10] arm: omap2: fix regulator warnings   Felipe Contreras
• [PATCH 1/2] ARM: integrator: only hardcode AP PrimeCell IDs   Linus Walleij
• [PATCH 2/2] ARM: integrator: explicitly select the serial drivers   Linus Walleij
• [GIT PULL] ARM: OMAP3/4: miscellaneous hwmod data updates   Tony Lindgren
• [PATCH 5/5] ASoC: mxs: correct 'direction' of device_prep_dma_cyclic   Mark Brown
• [PATCH v3 2/3] regulator: mc13892: add device tree probe support   Mark Brown
• [PATCH V3 10/14] ARM: mxs: add clk_prepare/clk_unprepare   Richard Zhao
• [PATCH v3 1/3] mfd: mc13xxx: add device tree probe support   Mark Brown
• [PATCH v2 2/7] ARM: OMAP1: ams-delta: convert latches to basic_mmio_gpio   Janusz Krzysztofik
• [PATCH v2 1/3] regulator: twl: adapt twl-regulator driver to dt   Mark Brown
• [PATCH v2 2/7] ARM: OMAP1: ams-delta: convert latches to basic_mmio_gpio   Tony Lindgren
• [PATCH v2 2/7] ARM: OMAP1: ams-delta: convert latches to basic_mmio_gpio   Janusz Krzysztofik
• [PATCH v3 2/3] regulator: mc13892: add device tree probe support   Mark Brown
• [RFC PATCH v2 6/6] ARM: Remove __ARCH_WANT_INTERRUPTS_ON_CTXSW on pre-ARMv6 CPUs   Frank Rowand
• [RFC PATCH v2 0/6] ARM: Remove the __ARCH_WANT_INTERRUPTS_ON_CTXSW definition   Frank Rowand
• [PATCH v3 2/3] regulator: mc13892: add device tree probe support   Shawn Guo
• [PATCHv2 1/2] gpio: add a driver for the Synopsys DesignWare APB GPIO block   Jamie Iles
• [PATCHv2 2/2] ARM: picoxcell: use new Synopsys Designware GPIO binding   Jamie Iles
• [PATCH V2 1/4] i2c: tegra: Add __devinit/exit to probe/remove   Olof Johansson
• [PATCH V2 2/4] i2c: tegra: Support DVC controller in device tree   Olof Johansson
• [PATCH V2 3/4] arm/dt: tegra: Use new compatible value for DVC I2C controller   Olof Johansson
• [PATCH V2 4/4] arm/dt: Add ADT7461 to Seaboard   Olof Johansson
• [PATCH v3 1/3] mfd: mc13xxx: add device tree probe support   Mark Brown
• [PATCH] arm/tegra: Seaboard: Add GPIO key device tree nodes   Olof Johansson
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Richard Zhao
• [PATCH v3 1/3] mfd: mc13xxx: add device tree probe support   Shawn Guo
• [PATCH v3 2/3] regulator: mc13892: add device tree probe support   Shawn Guo
• [PATCH 0/9] arm/tegra: Various pinmux-related cleanups   Olof Johansson
• [PATCH 0/2] arm/tegra: Fix section mismatch errors in pinmux   Olof Johansson
• [Linaro-mm-sig] [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Robert Morell
• [PATCH 1/3] arm/tegra: Delete tegra_init_clock()   Olof Johansson
• [PATCH v2 2/7] ARM: OMAP1: ams-delta: convert latches to basic_mmio_gpio   Tony Lindgren
• [PATCH V3 10/14] ARM: mxs: add clk_prepare/clk_unprepare   Shawn Guo
• [PATCH v2 2/7 v2] ARM: OMAP1: ams-delta: convert latches to basic_mmio_gpio   Janusz Krzysztofik
• [PATCH v3 1/3] mfd: mc13xxx: add device tree probe support   Shawn Guo
• [alsa-devel] [PATCH 5/5] ASoC: mxs: correct 'direction' of device_prep_dma_cyclic   Shawn Guo
• [PATCH] MXS: Convert mutexes in clock.c to spinlocks   Marek Vasut
• [PATCH v3] video: support MIPI-DSI controller driver   Donghwa Lee
• [PATCH] arm/tegra: boards: more __init/__initdata annotations   Olof Johansson
• [GIT PULL] at91: devices and boards files update for 3.3   Olof Johansson
• [GIT PULL] Borderline fixes for v3.2-rc6   Olof Johansson
• [PATCH] arm/plat-orion: make gpiochip label unique (fwd)   Olof Johansson
• [GIT PULL v2] at91: drivers for 3.3   Olof Johansson
• [GIT PULL] picoxcell features for 3.3   Olof Johansson
• [GIT PULL] picoxcell cleanups for 3.3   Olof Johansson
• [GIT PULL]   Olof Johansson
• [GIT PULL] omap uart runtime PM support for v3.2 merge window   Olof Johansson
• [GIT PULL] omap prcm changes for v3.3 merge window   Olof Johansson
• [PATCH 3/7] s3c-hsudc: add a remove function   Greg KH
• [PATCH 3/7] s3c-hsudc: add a remove function   Greg KH
• [PATCH V2 1/4] i2c: tegra: Add __devinit/exit to probe/remove   Shubhrajyoti Datta
• [PATCH v6 02/11] ARM: davinci: dm644x: remove the macros from the header to move to c file   Nori, Sekhar
• [PATCH] davinci: DA850 EVM: OHCI platform code   Manjunathappa, Prakash
• [RFC v2 PATCH 1/3] dt: device tree bindings for DDR memories   Aneesh V
• [RFC v2 PATCH 2/3] dt: device tree bindings for TI's EMIF sdram controller   Aneesh V
• [PATCH] arm: device.h: Add dma_mask to pdev_archdata structure   Dirk Behme
• [RFC v2 PATCH 2/3] dt: device tree bindings for TI's EMIF sdram controller   Aneesh V
• [PATCH] OMAP: I2C: add devexit to the remove code   Shubhrajyoti D
• [PATCH] video: backlight: support MIPI DSI based s6e8ax0 amoled panel driver   Donghwa Lee
• [PATCH] arm/tegra: boards: more __init/__initdata annotations   Uwe Kleine-König
• [PATCH] arm: device.h: Add dma_mask to pdev_archdata structure   Russell King - ARM Linux
• [PATCH] arm/tegra: boards: more __init/__initdata annotations   Russell King - ARM Linux
• [PATCH v3] video: support MIPI-DSI controller driver   Russell King - ARM Linux
• ARM errata corrections   Shinya Kuribayashi
• [PATCH] ARM: errata: Update the workaround for the 742231 Cortex-A9 erratum   Shinya Kuribayashi
• [PATCH v4] video: support MIPI-DSI controller driver   Donghwa Lee
• [PATCH] ARM: errata: Faulty logic in the Store Buffer may lead to data corruption   Shinya Kuribayashi
• [PATCH v6 03/11] ARM: davinci: dm365: remove the macros from the header to move to c file   Nori, Sekhar
• [Linaro-mm-sig] [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Sakari Ailus
• [PATCH 0/4] Fix the left DMA_NONE from dma_transfer_direction migration   Vinod Koul
• [PATCH 1/1] pinctrl: some typo fixes   Dong Aisheng
• [PATCH] ARM: OMAP: avoid NULL pointer dereference when no PMIC is configured   Daniel Mack
• [RFC v2 PATCH 0/3] dt: device tree bindings and data for EMIF and DDR   Aneesh V
• [PATCH] ARM: errata: Faulty logic in the Store Buffer may lead to data corruption   Catalin Marinas
• [RFC v2 PATCH 0/3] dt: device tree bindings and data for EMIF and DDR   Aneesh V
• [PATCH] davinci: DA850 EVM: OHCI platform code   Sergei Shtylyov
• [PATCH] davinci: DA850 EVM: OHCI platform code   Sergei Shtylyov
• [PATCH 5/8] s3c-hsudc: use udc_start and udc_stop functions   Felipe Balbi
• [PATCH 1/8] s3c-hsudc: move platform_data struct to global header   Felipe Balbi
• [PATCH v3 1/3] mfd: mc13xxx: add device tree probe support   Mark Brown
• [PATCH 8/8] s3c-hsudc: remove the_controller global   Felipe Balbi
• [PATCH 8/8] s3c-hsudc: remove the_controller global   Felipe Balbi
• [PATCH 1/8] s3c-hsudc: move platform_data struct to global header   Heiko Stübner
• [PATCH 10/12] ASoC: mxs-saif: convert to clk_prepare/clk_unprepare   Mark Brown
• [PATCH 0/12] Add clk_prepare/clk_unprepare for mxs clock api   Shawn Guo
• [PATCH 01/12] clk: add helper functions clk_prepare_enable and clk_disable_unprepare   Shawn Guo
• [PATCH 02/12] arm/mxs: convert platform code to clk_prepare/clk_unprepare   Shawn Guo
• [PATCH 03/12] net: fec: add clk_prepare/clk_unprepare   Shawn Guo
• [PATCH 04/12] dma: mxs-dma: convert to clk_prepare/clk_unprepare   Shawn Guo
• [PATCH 05/12] mmc: mxs-mmc: convert to clk_prepare/clk_unprepare   Shawn Guo
• [PATCH 06/12] mtd: gpmi-lib: convert to clk_prepare/clk_unprepare   Shawn Guo
• [PATCH 07/12] net: flexcan: convert to clk_prepare/clk_unprepare   Shawn Guo
• [PATCH 08/12] serial: mxs-auart: convert to clk_prepare/clk_unprepare   Shawn Guo
• [PATCH 09/12] video: mxsfb: convert to clk_prepare/clk_unprepare   Shawn Guo
• [PATCH 10/12] ASoC: mxs-saif: convert to clk_prepare/clk_unprepare   Shawn Guo
• [PATCH 11/12] clk: add config option HAVE_CLK_PREPARE into Kconfig   Shawn Guo
• [PATCH 12/12] arm/mxs: select HAVE_CLK_PREPARE for clock   Shawn Guo
• [PATCH-V4 0/3] Introducing TI's New SoC/board AM335XEVM   Hiremath, Vaibhav
• [RFC v2 PATCH 0/3] dt: device tree bindings and data for EMIF and DDR   Cousson, Benoit
• [PATCH 00/12] ARM: restart: SAMSUNG: use new restart hook   Kukjin Kim
• [PATCH 01/12] ARM: S3C64XX: introduce arch/arm/mach-s3c64xx/common.[ch]   Kukjin Kim
• [PATCH 02/12] ARM: restart: S3C64XX: use new restart hook   Kukjin Kim
• [PATCH 03/12] ARM: S5P64X0: introduce arch/arm/mach-s5p64x0/common.[ch]   Kukjin Kim
• [PATCH 04/12] ARM: restart: S5P64X0: use new restart hook   Kukjin Kim
• [PATCH 05/12] ARM: S5PC100: introduce arch/arm/mach-s5pc100/common.[ch]   Kukjin Kim
• [PATCH 06/12] ARM: restart: S5PC100: use new restart hook   Kukjin Kim
• [PATCH 07/12] ARM: S5PV210: introduce arch/arm/mach-s5pv210/common.[ch]   Kukjin Kim
• [PATCH 08/12] ARM: restart: S5PV210: use new restart hook   Kukjin Kim
• [PATCH 09/12] ARM: EXYNOS: introduce arch/arm/mach-exynos/common.[ch]   Kukjin Kim
• [PATCH 10/12] ARM: restart: EXYNOS: use new restart hook   Kukjin Kim
• [PATCH 11/12] ARM: restart: S3C24XX: move SWRST based S3C platforms to machine_desc hook   Kukjin Kim
• [PATCH 12/12] ARM: restart: S3C24XX: use new restart hook   Kukjin Kim
• [PATCH 0/4] Fix the left DMA_NONE from dma_transfer_direction migration   Shawn Guo
• [PATCH v4] I2C: add CSR SiRFprimaII on-chip I2C controllers driver   Barry Song
• [PATCH v4 2/4] ARM: pxa168: Add SDHCI support   Tanmay Upadhyay
• [PATCH 12/12] ARM: restart: S3C24XX: use new restart hook   Heiko Stübner
• [PATCH v6 04/11] ARM: davinci: dm646x: remove the macros from the header to move to c file   Nori, Sekhar
• [PATCH 3/3] ARM: OMAP2+: board-generic: Replace #if defined by #ifdef for consistency   Cousson, Benoit
• [PATCH v4 2/4] ARM: pxa168: Add SDHCI support   Haojian Zhuang
• [PATCH 12/12] ARM: restart: S3C24XX: use new restart hook   Kukjin Kim
• [PATCH v4 2/4] ARM: pxa168: Add SDHCI support   Haojian Zhuang
• [PATCH v2 0/5] ARM: OMAP2+: Interrupt controllers adaptation to DT   Benoit Cousson
• [PATCH v2 1/5] arm/dts: OMAP4: Update DTS file with new GIC bindings   Benoit Cousson
• [PATCH v2 2/5] ARM: OMAP2/3: intc: Add irqdomain support   Benoit Cousson
• [PATCH v2 3/5] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller   Benoit Cousson
• [PATCH v2 4/5] arm/dts: OMAP3: Add interrupt-controller bindings for INTC   Benoit Cousson
• [PATCH v2 5/5] ARM: OMAP2+: board-generic: Use of_irq_init API   Benoit Cousson
• [PATCH 0/12] Add clk_prepare/clk_unprepare for mxs clock api   Marek Vasut
• [PATCH v4 2/4] ARM: pxa168: Add SDHCI support   Tanmay Upadhyay
• [PATCH 02/12] arm/mxs: convert platform code to clk_prepare/clk_unprepare   Marek Vasut
• [PATCH v4 2/4] ARM: pxa168: Add SDHCI support   Tanmay Upadhyay
• [PATCH 03/12] net: fec: add clk_prepare/clk_unprepare   Marek Vasut
• [PATCH 04/12] dma: mxs-dma: convert to clk_prepare/clk_unprepare   Marek Vasut
• [PATCH 05/12] mmc: mxs-mmc: convert to clk_prepare/clk_unprepare   Marek Vasut
• [PATCH 06/12] mtd: gpmi-lib: convert to clk_prepare/clk_unprepare   Marek Vasut
• [PATCH 01/12] clk: add helper functions clk_prepare_enable and clk_disable_unprepare   Marek Vasut
• [PATCH 07/12] net: flexcan: convert to clk_prepare/clk_unprepare   Marek Vasut
• [PATCH 08/12] serial: mxs-auart: convert to clk_prepare/clk_unprepare   Marek Vasut
• [PATCH 09/12] video: mxsfb: convert to clk_prepare/clk_unprepare   Marek Vasut
• [PATCH 10/12] ASoC: mxs-saif: convert to clk_prepare/clk_unprepare   Marek Vasut
• [PATCH] davinci: DA850 EVM: OHCI platform code   Gupta, Ajay Kumar
• [PATCH v3 1/3] mfd: mc13xxx: add device tree probe support   Shawn Guo
• [PATCH 0/12] Add clk_prepare/clk_unprepare for mxs clock api   Marek Vasut
• [GIT PULL] U300 updates for 3.3   Linus Walleij
• [PATCH 0/12] Add clk_prepare/clk_unprepare for mxs clock api   Shawn Guo
• [PATCH 08/12] serial: mxs-auart: convert to clk_prepare/clk_unprepare   Uwe Kleine-König
• [RFC v2 PATCH 0/3] dt: device tree bindings and data for EMIF and DDR   Aneesh V
• [PATCH 01/12] clk: add helper functions clk_prepare_enable and clk_disable_unprepare   Shawn Guo
• [GIT PULL] Ux500 patches for 3.3, take two   Linus Walleij
• [PATCH] ARM: errata: Update the workaround for the 742231 Cortex-A9 erratum   Catalin Marinas
• [PATCH 0/12] Add clk_prepare/clk_unprepare for mxs clock api   Shawn Guo
• [PATCH 07/12] net: flexcan: convert to clk_prepare/clk_unprepare   Shawn Guo
• [PATCH 08/12] serial: mxs-auart: convert to clk_prepare/clk_unprepare   Shawn Guo
• [Linaro-mm-sig] [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Anca Emanuel
• [PATCH v3 1/3] mfd: mc13xxx: add device tree probe support   Mark Brown
• [PATCH] ARM: drop unused parameter from flush_cache_user_range   Catalin Marinas
• [PATCH V2 1/4] cpufreq: add arm soc generic cpufreq driver   Mark Brown
• [PATCH 1/2] gpio: add a driver for the Synopsys DesignWare APB GPIO block   Mark Brown
• [PATCH 1/2] gpio: add a driver for the Synopsys DesignWare APB GPIO block   Mark Brown
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Mark Brown
• [PATCH 17/20] ARM: mach-s3c64xx: properly disable CPU idle call   Mark Brown
• [PATCH 6/7] s3c-hsudc: Add regulator handling   Mark Brown
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Rob Herring
• [PATCH v2 04/10] rtc: rtc-twl: Add DT support for RTC inside twl4030/twl6030   Cousson, Benoit
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Arnd Bergmann
• [PATCH v3 1/3] mfd: mc13xxx: add device tree probe support   Shawn Guo
• [Linaro-mm-sig] [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Arnd Bergmann
• [Linaro-mm-sig] [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Arnd Bergmann
• [PATCHv2 1/2] gpio: add a driver for the Synopsys DesignWare APB GPIO block   Rob Herring
• [PATCHv2 1/2] gpio: add a driver for the Synopsys DesignWare APB GPIO block   Jamie Iles
• [PATCHv2 1/2] gpio: add a driver for the Synopsys DesignWare APB GPIO block   Rob Herring
• [PATCH] arm/tegra: boards: more __init/__initdata annotations   Stephen Warren
• [PATCH v3 00/11] OMAP4: Add DT support for i2c and twl6030   Benoit Cousson
• [PATCH v3 01/11] ARM: OMAP2+: pm: Do not init statically the SR and voltage layer with DT   Benoit Cousson
• [PATCH v3 02/11] i2c: OMAP: Add DT support for i2c controller   Benoit Cousson
• [PATCH v3 03/11] rtc: rtc-twl: Add DT support for RTC inside twl4030/twl6030   Benoit Cousson
• [PATCH v3 04/11] arm/dts: OMAP4: Add i2c controller nodes   Benoit Cousson
• [PATCH v3 05/11] arm/dts: OMAP3: Add i2c controller nodes   Benoit Cousson
• [PATCH v3 06/11] arm/dts: twl6030: Add DTS file for twl6030 PMIC   Benoit Cousson
• [PATCH v3 07/11] arm/dts: twl4030: Add DTS file for twl4030 PM + Audio IC   Benoit Cousson
• [PATCH v3 08/11] arm/dts: omap4-panda: Add twl6030 and i2c EEPROM   Benoit Cousson
• [PATCH v3 09/11] arm/dts: omap4-sdp: Add twl6030, i2c3 and i2c4 devices   Benoit Cousson
• [PATCH v3 10/11] arm/dts: omap3-beagle: Add twl4030 and i2c EEPROM   Benoit Cousson
• [PATCH v3 11/11] ARM: OMAP2+: board-generic: Remove i2c static init   Benoit Cousson
• [RFC v3 1/2] dma-buf: Introduce dma buffer sharing mechanism   Konrad Rzeszutek Wilk
• [Linaro-mm-sig] [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Rob Clark
• [PATCH v3 02/11] i2c: OMAP: Add DT support for i2c controller   Rob Herring
• [PATCH v3 07/11] arm/dts: twl4030: Add DTS file for twl4030 PM + Audio IC   Rob Herring
• [PATCH v3 07/11] arm/dts: twl4030: Add DTS file for twl4030 PM + Audio IC   Rob Herring
• [RFC v3 1/2] dma-buf: Introduce dma buffer sharing mechanism   Rob Clark
• [PATCH] arm/tegra: boards: more __init/__initdata annotations   Olof Johansson
• [PATCH] arm/tegra: boards: more __init/__initdata annotations   Olof Johansson
• [GIT PULL] Borderline fixes for v3.2-rc6   Tony Lindgren
• [Linaro-mm-sig] [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Daniel Vetter
• [PATCH] arm/tegra: boards: more __init/__initdata annotations   Olof Johansson
• [PATCH] arm/tegra: remove __initdata annotation from pinmux tables   Olof Johansson
• [RFC PATCH v3 0/5] pinctrl: imx: add pinnmux support   Dong Aisheng
• [RFC PATCH v3 1/5] dt: add of_get_child_count helper function   Dong Aisheng
• [RFC PATCH v3 2/5] pinctrl: add dt binding support for pinmux mappings   Dong Aisheng
• [RFC PATCH v3 3/5] pinctrl: imx: add pinctrl imx driver   Dong Aisheng
• [RFC PATCH v3 4/5] ARM: imx6q: using pinmux subsystem   Dong Aisheng
• [RFC PATCH v3 5/5] mmc: sdhci-esdhc-imx: using pinmux subsystem   Dong Aisheng
• [PATCH 1/1] dt: reform for_each_property to for_each_property_of_node_of_node   Dong Aisheng
• [GIT PULL] Borderline fixes for v3.2-rc6   Olof Johansson
• [PATCH v3] ARM: net: JIT compiler for packet filters   Mircea Gherzan
• [PATCH v2 1/7][RESEND] ARM: OMAP1: ams-delta: register latch dependent devices later   Tony Lindgren
• [GIT PULL] Ux500 patches for 3.3, take two   Olof Johansson
• [PATCH 1/1] dt: fix some code indent issue in of.h   Dong Aisheng
• [GIT PULL] U300 updates for 3.3   Olof Johansson
• [RFC PATCH v3 1/5] dt: add of_get_child_count helper function   Rob Herring
• [PATCH 1/1] dt: fix some code indent issue in of.h   Rob Herring
• [PATCH 1/1] dt: reform for_each_property to for_each_property_of_node_of_node   Rob Herring
• [PATCH] arm/tegra: remove __initdata annotation from pinmux tables   Stephen Warren
• [PATCH 17/20] ARM: mach-s3c64xx: properly disable CPU idle call   Nicolas Pitre
• [PATCH v3] ARM: net: JIT compiler for packet filters   David Miller
• [PATCH v6 05/11] ARM: davinci: create new common platform header for davinci   Nori, Sekhar
• [RFC v3 0/2] Introduce DMA buffer sharing mechanism   Daniel Vetter
• [RFC PATCH v3 1/5] dt: add of_get_child_count helper function   Marek Vasut
• [RFC PATCH v3 2/5] pinctrl: add dt binding support for pinmux mappings   Marek Vasut
• [RFC PATCH v3 3/5] pinctrl: imx: add pinctrl imx driver   Marek Vasut
• [GIT PULL] ARM: OMAP: device PM constraints: preparatory support   Paul Walmsley
• [PATCH v4] I2C: add CSR SiRFprimaII on-chip I2C controllers driver   Russell King - ARM Linux
• [PATCH 7/8] s3c-hsudc: use release_mem_region instead of release_resource   Russell King - ARM Linux
• [Linaro-mm-sig] [RFC v3 0/2] Introduce DMA buffer sharing mechanism   Dave Airlie
• [PATCH v2 1/7][RESEND] ARM: OMAP1: ams-delta: register latch dependent devices later   Janusz Krzysztofik
• [PATCH v2 1/7][RESEND] ARM: OMAP1: ams-delta: register latch dependent devices later   Russell King - ARM Linux
• [alsa-devel] [PATCH v2 1/7][RESEND] ARM: OMAP1: ams-delta: register latch dependent devices later   Janusz Krzysztofik
• [PATCH v2 1/7][RESEND] ARM: OMAP1: ams-delta: register latch dependent devices later   Tony Lindgren
• [PATCH 00/12] ARM: restart: SAMSUNG: use new restart hook   Russell King - ARM Linux
• [PATCH v4 2/4] ARM: pxa168: Add SDHCI support   Russell King - ARM Linux
• [PATCH 7/8] s3c-hsudc: use release_mem_region instead of release_resource   Felipe Balbi
• [PATCH 02/12] arm/mxs: convert platform code to clk_prepare/clk_unprepare   Russell King - ARM Linux
• [PATCH 08/12] serial: mxs-auart: convert to clk_prepare/clk_unprepare   Russell King - ARM Linux
• [PATCH 7/8] s3c-hsudc: use release_mem_region instead of release_resource   Russell King - ARM Linux
• [PATCH] net: macb: fix build break with !CONFIG_OF   Olof Johansson
• [PATCH v3 02/11] i2c: OMAP: Add DT support for i2c controller   Olof Johansson
• [PATCH 08/12] serial: mxs-auart: convert to clk_prepare/clk_unprepare   Marek Vasut
• [PATCH 02/12] arm/mxs: convert platform code to clk_prepare/clk_unprepare   Marek Vasut
• [PATCH] arm/at91: fix build of stamp9g20   Olof Johansson
• [PATCH V2 1/4] i2c: tegra: Add __devinit/exit to probe/remove   Stephen Warren
• [PATCH v2 1/7 v2] ARM: OMAP1: ams-delta: register latch dependent devices later   Janusz Krzysztofik
• [PATCH] ARM/of: allow *machine_desc.dt_compat to be const   Uwe Kleine-König
• Status of the following patch (clocksource sched_clock) ?   Karicheri, Muralidharan
• [PATCH] input: serio: ams-delta: toggle keyboard power over GPIO   Janusz Krzysztofik
• [PATCH 08/12] serial: mxs-auart: convert to clk_prepare/clk_unprepare   Russell King - ARM Linux
• [Linaro-mm-sig] [RFC v3 0/2] Introduce DMA buffer sharing mechanism   Rob Clark
• [PATCH] video: backlight: support MIPI DSI based s6e8ax0 amoled panel driver   Andrew Morton
• [PATCH v3 1/3] mfd: mc13xxx: add device tree probe support   Mark Brown
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Richard Zhao
• [PATCH 17/20] ARM: mach-s3c64xx: properly disable CPU idle call   Mark Brown
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Mark Brown
• [RFC PATCH v3 1/5] dt: add of_get_child_count helper function   Stephen Warren
• [PATCH 0/3] coupled cpuidle state support   Colin Cross
• [PATCH 1/3] cpuidle: refactor out cpuidle_enter_state   Colin Cross
• [PATCH 2/3] cpuidle: fix error handling in __cpuidle_register_device   Colin Cross
• [PATCH 3/3] cpuidle: add support for states that affect multiple cpus   Colin Cross
• [RFC PATCH v3 2/5] pinctrl: add dt binding support for pinmux mappings   Stephen Warren
• [PATCH 08/12] serial: mxs-auart: convert to clk_prepare/clk_unprepare   Marek Vasut
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Richard Zhao
• linux-next: manual merge of the slave-dma tree with the arm-soc tree   Stephen Rothwell
• [PATCH] ARM: sp804: modernize clock event registration   Linus Walleij
• [PATCH v3 1/3] mfd: mc13xxx: add device tree probe support   Shawn Guo
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Mark Brown
• [PATCH v3 1/3] mfd: mc13xxx: add device tree probe support   Mark Brown
• [PATCH 00/12] ARM: restart: SAMSUNG: use new restart hook   Kukjin Kim
• [PATCH 04/12] ARM: restart: S5P64X0: use new restart hook   Kukjin Kim
• [PATCH 06/12] ARM: restart: S5PC100: use new restart hook   Kukjin Kim
• [PATCH 08/12] ARM: restart: S5PV210: use new restart hook   Kukjin Kim
• [PATCH 10/12] ARM: restart: EXYNOS: use new restart hook   Kukjin Kim
• [PATCH 12/12] ARM: restart: S3C24XX: use new restart hook   Kukjin Kim
• [PATCH 02/12] ARM: restart: S3C64XX: use new restart hook   Kukjin Kim
• [PATCH v4 2/4] ARM: pxa168: Add SDHCI support   Haojian Zhuang
• [PATCH 09/12] video: mxsfb: convert to clk_prepare/clk_unprepare   Florian Tobias Schandinat
• [PATCH v3 1/3] mfd: mc13xxx: add device tree probe support   Shawn Guo
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Richard Zhao
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Mark Brown
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Richard Zhao
• [RFC PATCH v3 1/5] dt: add of_get_child_count helper function   Dong Aisheng-B29396
• [PATCH 1/1] dt: fix some code indent issue in of.h   Dong Aisheng-B29396
• [PATCH 1/1] dt: reform for_each_property to for_each_property_of_node_of_node   Dong Aisheng-B29396
• [PATCH 1/1] dt: fix some code indent issue in of.h   Joe Perches
• [RFC PATCH v3 3/5] pinctrl: imx: add pinctrl imx driver   Dong Aisheng-B29396
• [RFC PATCH v3 1/5] dt: add of_get_child_count helper function   Dong Aisheng-B29396
• [RFC PATCH v3 1/5] dt: add of_get_child_count helper function   Dong Aisheng-B29396
• [PATCH v4] I2C: add CSR SiRFprimaII on-chip I2C controllers driver   Barry Song
• [PATCH v4] I2C: add CSR SiRFprimaII on-chip I2C controllers driver   Richard Zhao
• [PATCH v4] I2C: add CSR SiRFprimaII on-chip I2C controllers driver   Shawn Guo
• [PATCH 1/8] s3c-hsudc: move platform_data struct to global header   Kukjin Kim
• [RESEND PATCH] ARM: SAMSUNG: Add s3c_setparent_clksrc in s3c_set_clksrc   Kukjin Kim
• [PATCH 0/4] Fix the left DMA_NONE from dma_transfer_direction migration   Vinod Koul
• [PATCH] ARM: remove header files included more than once   Kukjin Kim
• [PATCH v5 0/2] video: support MIPI-DSI controller driver   Donghwa Lee
• [PATCH v5 1/2] video: support MIPI-DSI controller driver   Donghwa Lee
• [PATCH v5 2/2] video: backlight: support s6e8ax0 panel driver based on MIPI DSI   Donghwa Lee
• [PATCH 0/3] Support Samsung S5P OHCI device and driver   Kukjin Kim
• [PATCH 0/4] Fix the left DMA_NONE from dma_transfer_direction migration   Vinod Koul
• [PATCH 0/4] Fix the left DMA_NONE from dma_transfer_direction migration   Shawn Guo
• [PATCH 0/4] Fix the left DMA_NONE from dma_transfer_direction migration   Shawn Guo
• [PATCH] virtio: harsher barriers for virtio-mmio.   Rusty Russell
• [PATCH] davinci: DA850 EVM: OHCI platform code   Manjunathappa, Prakash
• [PATCH] davinci: DA850 EVM: OHCI platform code   Manjunathappa, Prakash
• [PATCH] net: macb: fix build break with !CONFIG_OF   David Miller
• [RFC PATCH v3 1/5] dt: add of_get_child_count helper function   Lothar Waßmann
• [PATCH v4] s3c/s3c24xx: arm: leds: Make s3c24xx LEDS driver use gpiolib. Fix error disabling pull during probe.   Kukjin Kim
• [PATCHv2 resend] Fix compilation error when CONFIG_CPU_FREQ_S3C24XX_DEBUGFS selected.   Kukjin Kim
• [PATCH 1/4] ARM: SAMSUNG: cleanup of rtc register definitions   Kukjin Kim
• [PATCH v2] davinci: DA850 EVM: OHCI platform code   Manjunathappa, Prakash
• [PATCH v2 0/4] Implement RTC support for S3C2443/S3C2416/S3C2450   Kukjin Kim
• [BUGFIX] video/mxsfb: fix crash when unblanking the display   Lothar Waßmann
• [PATCH v6 05/11] ARM: davinci: create new common platform header for davinci   Hadli, Manjunath
• [PATCH] ARM: S3C64XX: Add basic cpuidle driver   Kukjin Kim
• Pull Requeset: Exynos4 Register Address Update for Devfreq Drivers.   MyungJoo Ham
• [PATCH v2 0/4] Implement RTC support for S3C2443/S3C2416/S3C2450   Heiko Stübner
• [PATCH 0/3] coupled cpuidle state support   Arjan van de Ven
• [PATCH v3 0/4] Implement RTC support for S3C2443/S3C2416/S3C2450   Heiko Stübner
• [PATCH 1/4] ARM: SAMSUNG: cleanup of rtc register definitions   Heiko Stübner
• [PATCH 2/4] rtc-s3c: make room for more variants in devicetree block   Heiko Stübner
• [PATCH 3/4] rtc-s3c: add variants for S3C2443 and S3C2416   Heiko Stübner
• [PATCH 4/4] ARM: S3C2443/S3C2416: add s3c_rtc_setname and rename rtc devices   Heiko Stübner
• Is Pandaboard cpuhotplug working stably?   Barry Song
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Richard Zhao
• [PATCH 0/3] coupled cpuidle state support   Colin Cross
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Arnd Bergmann
• [PATCH 0/3] coupled cpuidle state support   Arjan van de Ven
• Is Pandaboard cpuhotplug working stably?   Russell King - ARM Linux
• [PATCH 0/3] coupled cpuidle state support   Colin Cross
• [PATCH v2] davinci: DA850 EVM: OHCI platform code   Nori, Sekhar
• Is Pandaboard cpuhotplug working stably?   Barry Song
• Is Pandaboard cpuhotplug working stably?   Russell King - ARM Linux
• [RFC 1/8] gpio/microblaze: Eliminate duplication of of_get_named_gpio_flags()   Michal Simek
• [PATCH 1/2] remoteproc: depend on EXPERIMENTAL   Ohad Ben-Cohen
• [PATCH 2/2] rpmsg: depend on EXPERIMENTAL   Ohad Ben-Cohen
• [PATCH 1/8] s3c-hsudc: move platform_data struct to global header   Felipe Balbi
• [PATCH 0/7] remoteproc/rpmsg: a few trivial fixes   Ohad Ben-Cohen
• [PATCH 1/1] dt: fix some code indent issue in of.h   Andy Whitcroft
• [PATCH] dmaengine: Add support for MEMCPY for imx-dma.   javier Martin
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Kay Sievers
• [PATCH v2] davinci: DA850 EVM: OHCI platform code   Sergei Shtylyov
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Mark Brown
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Mark Brown
• [PATCH 0/3] coupled cpuidle state support   Arjan van de Ven
• [PATCH v2] davinci: DA850 EVM: OHCI platform code   Sergei Shtylyov
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Kay Sievers
• [PATCH v7 0/8] ARM: davinci:add support for dm644x vpbe display driver   Manjunath Hadli
• [PATCH v7 1/8] davinci: vpif: remove machine specific inclusion from driver   Manjunath Hadli
• [PATCH v7 2/8] ARM: davinci: create new common platform header for davinci   Manjunath Hadli
• [PATCH v7 3/8] davinci: eliminate use of IO_ADDRESS() on sysmod   Manjunath Hadli
• [PATCH v7 4/8] davinci: dm644x: Replace register base value with a defined macro   Manjunath Hadli
• [PATCH v7 5/8] davinci: dm644x: change vpfe capture structure variables for consistency   Manjunath Hadli
• [PATCH v7 6/8] davinci: dm644x: move vpfe init from soc to board specific files   Manjunath Hadli
• [PATCH v7 7/8] davinci: dm644x: add support for v4l2 video display   Manjunath Hadli
• [PATCH v7 8/8] davinci: dm644x EVM: add support for VPBE display   Manjunath Hadli
• [PATCH] pxa/hx4700: Fix PXA_GPIO_IRQ_BASE/IRQ_NUM values   Philipp Zabel
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Richard Zhao
• [PATCH V3 1/7] ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp   Richard Zhao
• [PATCH] ARM: net: JIT compiler for packet filters   Mircea Gherzan
• [PATCH] ARM: imx6q: build pm code only when CONFIG_PM selected   Eric Miao
• [PATCH] ARM: net: JIT compiler for packet filters   Mircea Gherzan
• [PATCH] ARM: imx6q: build pm code only when CONFIG_PM selected   Lothar Waßmann
• [PATCH v7 5/8] davinci: dm644x: change vpfe capture structure variables for consistency   Karicheri, Muralidharan
• [PATCH v2] ARM: net: JIT compiler for packet filters   Mircea Gherzan
• [PATCH v4 0/4] Add device tree support for mc13892 regulator driver   Shawn Guo
• [PATCH 1/4] mfd: improve mc13xxx dt binding document   Shawn Guo
• [PATCH 2/4] regulator: mc13892: remove the unnecessary prefix from regulator name   Shawn Guo
• [PATCH 3/4] regulator: mc13892: add device tree probe support   Shawn Guo
• [PATCH 4/4] arm/imx: add mc13892 support into imx51-babbage.dts   Shawn Guo
• [PATCH] ARM: net: JIT compiler for packet filters   Nicolas Pitre
• [RFC PATCH] ARM: new architecture for Energy Micro's EFM32 Cortex-M3 SoCs   Uwe Kleine-König
• [PATCH] ARM: imx6q: build pm code only when CONFIG_PM selected   Shawn Guo
• [PATCH] ARM: imx6q: build pm code only when CONFIG_PM selected   Shawn Guo
• [RFC PATCH] ARM: new architecture for Energy Micro's EFM32 Cortex-M3 SoCs   Jamie Iles
• [PATCH V3 0/2] Support for HTKW mcx   Ilya Yanok
• [PATCH V3 1/2] mcx: very basic support for HTKW mcx board   Ilya Yanok
• [PATCH V3 2/2] mcx: support for HTKW mcx board   Ilya Yanok
• [RFC PATCH] ARM: new architecture for Energy Micro's EFM32 Cortex-M3 SoCs   Arnd Bergmann
• [RFC PATCH] ARM: new architecture for Energy Micro's EFM32 Cortex-M3 SoCs   Uwe Kleine-König
• [Linaro-mm-sig] [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Arnd Bergmann
• [RFC PATCH] ARM: new architecture for Energy Micro's EFM32 Cortex-M3 SoCs   Ohad Ben-Cohen
• Adding remoteproc/rpmsg to linux-next   Ohad Ben-Cohen
• [PATCH] arm: device.h: Add dma_mask to pdev_archdata structure   Fabio Estevam
• [PATCH] arm: device.h: Add dma_mask to pdev_archdata structure   Fabio Estevam
• [PATCH 07/10] ASoC: OMAP: ams-delta: Drive modem/codec pins over GPIO API   Liam Girdwood
• [PATCH] usb: gadget: Fix build error due to selection of USB_FSL_MPH_DR_OF by ARCH_MXC   Fabio Estevam
• [PATCH 0/3] Support Samsung S5P OHCI device and driver   Greg KH
• [Linaro-mm-sig] [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Daniel Vetter
• [PATCH 0/3] coupled cpuidle state support   Colin Cross
• [PATCH v2 1/7 v2] ARM: OMAP1: ams-delta: register latch dependent devices later   Tony Lindgren
• [PATCH] input: serio: ams-delta: toggle keyboard power over GPIO   Tony Lindgren
• [PATCH v2 5/7] MTD: NAND: ams-delta: use GPIO instead of custom I/O   Tony Lindgren
• [GIT PULL 0/5] Tegra updates for 3.3   Olof Johansson
• [GIT PULL 1/5] Tegra cleanups for 3.3   Olof Johansson
• [GIT PULL 2/5] Tegra devicetree updates for 3.3   Olof Johansson
• [GIT PULL 3/5] Tegra SoC updates for 3.3   Olof Johansson
• [GIT PULL 4/5] Tegra board updates for 3.3   Olof Johansson
• [GIT PULL 5/5] Tegra driver updates for 3.3   Olof Johansson
• [GIT PULL 5/5] Tegra driver updates for 3.3   Olof Johansson
• [PATCH] pxa/hx4700: Fix PXA_GPIO_IRQ_BASE/IRQ_NUM values   Dmitry Artamonow
• [PATCH 3/3] ARM: OMAP2+: board-generic: Replace #if defined by #ifdef for consistency   Tony Lindgren
• [PATCH 0/3] coupled cpuidle state support   Arjan van de Ven
• [PATCH] ARM: mx3_defconfig: Allow all the targets to be built by default   Fabio Estevam
• [linux-pm] [PATCH 0/3] coupled cpuidle state support   Colin Cross
• [PATCH v2 5/7] MTD: NAND: ams-delta: use GPIO instead of custom I/O   Janusz Krzysztofik
• [PATCHv2 resend] Fix compilation error when CONFIG_CPU_FREQ_S3C24XX_DEBUGFS selected.   Denis Kuzmenko
• [PATCH v2 1/7 v2] ARM: OMAP1: ams-delta: register latch dependent devices later   Janusz Krzysztofik
• [RFC PATCH] ARM: new architecture for Energy Micro's EFM32 Cortex-M3 SoCs   Russell King - ARM Linux
• [PATCH] input: serio: ams-delta: toggle keyboard power over GPIO   Janusz Krzysztofik
• [RFC PATCH] ARM: new architecture for Energy Micro's EFM32 Cortex-M3 SoCs   Russell King - ARM Linux
• [PATCH v2 1/7 v2] ARM: OMAP1: ams-delta: register latch dependent devices later   Tony Lindgren
• [RFC PATCH] ARM: new architecture for Energy Micro's EFM32 Cortex-M3 SoCs   Jamie Iles
• [RFC PATCH] ARM: new architecture for Energy Micro's EFM32 Cortex-M3 SoCs   Nicolas Pitre
• [PATCH v2 5/7] MTD: NAND: ams-delta: use GPIO instead of custom I/O   Artem Bityutskiy
• [PATCH] arm/at91: fix build of stamp9g20   Nicolas Ferre
• [PATCH] net: macb: fix build break with !CONFIG_OF   Nicolas Ferre
• [PATCHv2 resend] Fix compilation error when CONFIG_CPU_FREQ_S3C24XX_DEBUGFS selected.   Kukjin Kim
• [PATCH 07/10] ASoC: OMAP: ams-delta: Drive modem/codec pins over GPIO API   Janusz Krzysztofik
• [PATCHv2 resend] Fix compilation error when CONFIG_CPU_FREQ_S3C24XX_DEBUGFS selected.   Denis Kuzmenko
• [PATCH V3 4/7] cpufreq: add generic cpufreq driver   Mark Brown
• [PATCH] OMAP3: hwmod_data: add HWMOD_INIT_NO_RESET flag for dss_dispc   Ilya Yanok
• [PATCHv2 resend] Fix compilation error when CONFIG_CPU_FREQ_S3C24XX_DEBUGFS selected.   Kukjin Kim
• [PATCH] ARM: imx6q: build pm code only when CONFIG_PM selected   Eric Miao
• [PATCH] ARM: mx3_defconfig: Allow all the targets to be built by default   Shawn Guo
• [PATCH] ARM: imx6q: build pm code only when CONFIG_PM selected   Shawn Guo
• [PATCH] ARM: imx6q: resume PL310 only when CACHE_L2X0 defined   Eric Miao
• [PATCH] ARM: imx6q: build pm code only when CONFIG_PM selected   Eric Miao
• [PATCH] dmaengine: Add support for MEMCPY for imx-dma.   Vinod Koul
• [PATCH 0/4] Fix the left DMA_NONE from dma_transfer_direction migration   Vinod Koul
• [PATCH v5 1/2] video: support MIPI-DSI controller driver   Jingoo Han
• [PATCH] pxa/hx4700: Fix PXA_GPIO_IRQ_BASE/IRQ_NUM values   Haojian Zhuang
• [PATCH v5 1/2] video: support MIPI-DSI controller driver   Jingoo Han
• [PATCH] usb: gadget: Fix build error due to selection of USB_FSL_MPH_DR_OF by ARCH_MXC   Lothar Waßmann
• [PATCH v4 0/7] add a generic cpufreq driver   Richard Zhao
• [PATCH v4 1/7] ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp   Richard Zhao
• [PATCH v4 2/7] arm/imx: cpufreq: remove loops_per_jiffy recalculate for smp   Richard Zhao
• [PATCH v4 3/7] cpufreq: OMAP: remove loops_per_jiffy recalculate for smp   Richard Zhao
• [PATCH v4 4/7] cpufreq: add clk-reg cpufreq driver   Richard Zhao
• [PATCH v4 5/7] dts/imx6q: add cpufreq property   Richard Zhao
• [PATCH v4 6/7] arm/imx6q: register arm_clk as cpu to clkdev   Richard Zhao
• [PATCH v4 7/7] arm/imx6q: select ARCH_HAS_CPUFREQ   Richard Zhao
• Fwd: Re: [03: PATCH 0/5] The remaining stuff   Russell King - ARM Linux
• [PATCH v3 0/3] implement pinmux for arch-mmp   Haojian Zhuang
• [PATCH v3 2/3] ARM: mmp: enable pinmux in mmp platform   Haojian Zhuang
• [PATCH v3 3/3] gpio: pxa: request pinmux function for gpio   Haojian Zhuang
• [RFC PATCH v3 2/5] pinctrl: add dt binding support for pinmux mappings   Dong Aisheng-B29396
• [PATCH v2 02/10] i2c: OMAP: Add DT support for i2c controller   Shubhrajyoti
• [PATCH] ARM: pxa: Include linux/export.h in balloon3.c   Haojian Zhuang
• [PATCH] mioa701: add newly available DoC G3 chip   Haojian Zhuang
• [linux-pm] [PATCH 0/3] coupled cpuidle state support   Shilimkar, Santosh
• [GIT PULL for v3.3 1/2] pxa for-next branch   Haojian Zhuang
• Is Pandaboard cpuhotplug working stably?   Shilimkar, Santosh
• [PATCH] regulator: max8925: fix enabled/disabled judgement mistake   Haojian Zhuang
• [linux-pm] [PATCH 0/3] coupled cpuidle state support   Arjan van de Ven
• [PATCH 1/3] rtc: rtc-max8925: fix max8925_rtc_read_alarm return value error   Haojian Zhuang
• [PATCH 2/3] rtc: rtc-max8925: fix alarm->enabled related mistake in max8925_rtc_read_alarm/max8925_rtc_set_alarm   Haojian Zhuang
• [PATCH 3/3] rtc: max8925: add function to work as wakeup source   Haojian Zhuang
• [PATCH v3 02/11] i2c: OMAP: Add DT support for i2c controller   Cousson, Benoit
• [PATCH] misc: max8925_onkey: add function to work as wakeup source   Haojian Zhuang
• [PATCH 1/2 v2] imx: Add save/restore functions for UART control regs   Dirk Behme
• [PATCH 2/2 v3] imx: add polled io uart methods   Dirk Behme
• [PATCH] misc: max8925_onkey: add function to work as wakeup source   Wanlong Gao
• [PATCH 07/10] ASoC: OMAP: ams-delta: Drive modem/codec pins over GPIO API   Girdwood, Liam
• [RFC PATCH v2 4/8] media: videobuf2: introduce VIDEOBUF2_PAGE memops   Marek Szyprowski
• [linux-pm] [PATCH 0/3] coupled cpuidle state support   Shilimkar, Santosh
• [PATCH] OMAP3: hwmod_data: add HWMOD_INIT_NO_RESET flag for dss_dispc   Tomi Valkeinen
• Is Pandaboard cpuhotplug working stably?   Russell King - ARM Linux
• Is Pandaboard cpuhotplug working stably?   Shilimkar, Santosh
• [PATCH v2 1/7 v2] ARM: OMAP1: ams-delta: register latch dependent devices later   Janusz Krzysztofik
• [PATCH] regulator: max8925: fix enabled/disabled judgement mistake   Mark Brown
• Fwd: Re: [03: PATCH 0/5] The remaining stuff   Hans J. Koch
• [PATCH 1/4] mfd: improve mc13xxx dt binding document   Mark Brown
• [PATCH v2 1/7 v2] ARM: OMAP1: ams-delta: register latch dependent devices later   Jarkko Nikula
• [PATCH 2/4] regulator: mc13892: remove the unnecessary prefix from regulator name   Mark Brown
• [PATCH 3/4] regulator: mc13892: add device tree probe support   Mark Brown
• [PATCH v2 1/7 v2] ARM: OMAP1: ams-delta: register latch dependent devices later   Mark Brown
• [GIT PULL] ARM: amba: Enable module alias autogeneration for AMBA drivers   Dave Martin
• [PATCH v4] ARM: Add generic instruction opcode manipulation helpers   Dave Martin
• [PATCH v2] usb: gadget: Fix build error due to selection of USB_FSL_MPH_DR_OF by ARCH_MXC   Fabio Estevam
• [PATCH 02/10] arm: vexpress: fix kconfig warning   Dave Martin
• [PATCH 2/4] regulator: mc13892: remove the unnecessary prefix from regulator name   Shawn Guo
• Oops in guest after ioremap() on ARMv7   David Vrabel
• [PATCH v4] I2C: add CSR SiRFprimaII on-chip I2C controllers driver   Barry Song
• [PATCH v2 1/1] dt: reform for_each_property to for_each_property_of_node   Dong Aisheng
• [PATCH 1/7] arm/imx6q: add clock debugfs support   Jason Chen
• [PATCH] arm/imx6q: add clock debugfs support   Jason Chen
• [PATCH v2] davinci: DA850 EVM: OHCI platform code   Nori, Sekhar
• 答复: [PATCH] arm/imx6q: add clock debugfs support   Chen Jie-B02280
• [PATCH] OMAP3: hwmod_data: add HWMOD_INIT_NO_RESET flag for dss_dispc   Ilya Yanok
• [PATCH v4] ARM: net: JIT compiler for packet filters   Mircea Gherzan
• [PATCH 0/1] Add Qualcomm MSM ADM DMAEngine driver   Ravi Kumar V
• [PATCH 1/1] msm: DMAEngine: Add DMAEngine driver based on old MSM DMA APIs   Ravi Kumar V
• [PATCH v7 1/8] davinci: vpif: remove machine specific inclusion from driver   Nori, Sekhar
• [PATCH] regulator: max8925: fix enabled/disabled judgement mistake   Haojian Zhuang
• [PATCH] arm: oprofile: fix linkage issue   Vladimir Zapolskiy
• [PATCH v4] ARM: net: JIT compiler for packet filters   Eric Dumazet
• [PATCH] regulator: max8925: fix enabled/disabled judgement mistake   Mark Brown
• [PATCH] ARM: imx6q: add support for IRAM   Eric Miao
• [PATCH v3 02/11] i2c: OMAP: Add DT support for i2c controller   Cousson, Benoit
• [PATCH] OMAP3: hwmod_data: register dss hwmods after dss_core   Ilya Yanok
• [PATCH] arm: oprofile: fix linkage issue   Robert Richter
• [PATCH] regulator: max8925: fix enabled/disabled judgement mistake   Haojian Zhuang
• [PATCH] ARM: smp_twd: make sure timer is stopped before registering it   Marc Zyngier
• [PATCH] regulator: max8925: fix enabled/disabled judgement mistake   Mark Brown
• Oops in guest after ioremap() on ARMv7   Catalin Marinas
• [PATCH] arm: oprofile: fix linkage issue   Vladimir Zapolskiy
• [PATCH] arm: oprofile: fix linkage issue   Robert Richter
• [PATCH v4 00/12] OMAP4: Add DT support for i2c and twl6030   Benoit Cousson
• [PATCH v4 01/12] ARM: OMAP2+: pm: Do not init statically the SR and voltage layer with DT   Benoit Cousson
• [PATCH v4 02/12] i2c: OMAP: Add DT support for i2c controller   Benoit Cousson
• [PATCH v4 03/12] mfd: twl-core: Add initial DT support for twl4030/twl6030   Benoit Cousson
• [PATCH v4 04/12] rtc: rtc-twl: Add DT support for RTC inside twl4030/twl6030   Benoit Cousson
• [PATCH v4 05/12] arm/dts: OMAP4: Add i2c controller nodes   Benoit Cousson
• [PATCH v4 06/12] arm/dts: OMAP3: Add i2c controller nodes   Benoit Cousson
• [PATCH v4 07/12] arm/dts: twl6030: Add DTS file for twl6030 PMIC   Benoit Cousson
• [PATCH v4 08/12] arm/dts: twl4030: Add DTS file for twl4030 PM + Audio IC   Benoit Cousson
• [PATCH v4 09/12] arm/dts: omap4-panda: Add twl6030 and i2c EEPROM   Benoit Cousson
• [PATCH v4 10/12] arm/dts: omap4-sdp: Add twl6030, i2c3 and i2c4 devices   Benoit Cousson
• [PATCH v4 11/12] arm/dts: omap3-beagle: Add twl4030 and i2c EEPROM   Benoit Cousson
• [PATCH v4 12/12] ARM: OMAP2+: board-generic: Remove i2c static init   Benoit Cousson
• [PATCH] arm: oprofile: fix linkage issue   Vladimir Zapolskiy
• [PATCH v3 00/11] OMAP4: Add DT support for i2c and twl6030   Rob Herring
• [PATCH] OMAP3: hwmod_data: register dss hwmods after dss_core   Igor Grinberg
• Adding remoteproc/rpmsg to linux-next   Arnd Bergmann
• [PATCH v2 1/1] dt: reform for_each_property to for_each_property_of_node   Rob Herring
• [PATCH 1/4] mfd: improve mc13xxx dt binding document   Samuel Ortiz
• [PATCH 02/10] arm: vexpress: fix kconfig warning   Felipe Contreras
• [PATCH 2/2] OMAP4: mcbsp: Clock reparenting support   Peter Ujfalusi
• insmod problem on ARM with more than 16MB of RAM?   Sergei Poselenov
• [PATCH v2 0/9] OMAP4: ASoC: Support for PandaBoard family   Peter Ujfalusi
• [PATCH v2 1/9] include: platform_data: Platform data header for OMAP4 ASoC audio   Peter Ujfalusi
• [PATCH v2 2/9] OMAP4: 4430sdp: Register platform device for OMAP4 audio   Peter Ujfalusi
• [PATCH v2 3/9] ASoC: omap-abe-twl6040: Convert to platform deriver   Peter Ujfalusi
• [PATCH v2 4/9] ASoC: twl6040: Convert MICBIAS to SUPPLY widget   Peter Ujfalusi
• [PATCH v2 5/9] ASoC: omap-abe-twl6040: Add complete DAPM routing   Peter Ujfalusi
• [PATCH v2 6/9] ASoC: omap-abe-twl6040: DAI link selection based on platform data   Peter Ujfalusi
• [PATCH v2 7/9] ASoC: omap-abe-twl6040: Configure card according to platform data   Peter Ujfalusi
• [PATCH v2 8/9] OMAP4: omap4panda: Enable audio support   Peter Ujfalusi
• [PATCH v2 9/9] ASoC: Kconfig: OMAP4: Enable support for PandaBoards   Peter Ujfalusi
• Oops in guest after ioremap() on ARMv7   David Vrabel
• insmod problem on ARM with more than 16MB of RAM?   Catalin Marinas
• [PATCH v2] ARM: net: JIT compiler for packet filters   Dave Martin
• [GIT PULL] Borderline fixes for v3.2-rc6   Tony Lindgren
• [GIT PULL] Borderline fixes for v3.2-rc6   Olof Johansson
• [GIT PULL] Borderline fixes for v3.2-rc6   Tony Lindgren
• [GIT PULL] Non critical fixes for v3.3 merge window, part2   Olof Johansson
• [PATCH v2 00/15] Make SMP timers standalone   Marc Zyngier
• [PATCH v2 01/15] ARM: local timers: allow smp_twd to be used standalone   Marc Zyngier
• [PATCH v2 02/15] ARM: smp_twd: add device tree support   Marc Zyngier
• [PATCH v2 03/15] ARM: local timers: switch realview to standalone smp_twd   Marc Zyngier
• [PATCH v2 04/15] ARM: local timers: switch vexpress to standalone smp_twd   Marc Zyngier
• [PATCH v2 05/15] ARM: local timers: remove localtimer.c from plat-versatile   Marc Zyngier
• [PATCH v2 06/15] ARM: local timers: switch tegra to standalone smp_twd   Marc Zyngier
• [PATCH v2 07/15] ARM: local timers: switch omap4 to standalone smp_twd   Marc Zyngier
• [PATCH v2 08/15] ARM: local timers: switch shmobile to standalone smp_twd   Marc Zyngier
• [PATCH v2 09/15] ARM: local timers: switch ux500 to standalone smp_twd   Marc Zyngier
• [PATCH v2 10/15] ARM: local timers: switch highbank to standalone smp_twd   Marc Zyngier
• [PATCH v2 11/15] ARM: local timers: switch imx6q to standalone smp_twd   Marc Zyngier
• [PATCH v2 12/15] ARM: smp_twd: remove support for non-standalone version   Marc Zyngier
• [PATCH v2 13/15] ARM: local timers: make MCT timer standalone   Marc Zyngier
• [PATCH v2 14/15] ARM: local timers: make MSM timers standalone   Marc Zyngier
• [PATCH v2 15/15] ARM: local timers: Remove CONFIG_LOCAL_TIMERS support   Marc Zyngier
• [PATCH v2 0/9] OMAP4: ASoC: Support for PandaBoard family   Peter Ujfalusi
• [PATCH v4 03/12] mfd: twl-core: Add initial DT support for twl4030/twl6030   Samuel Ortiz
• [PATCH 0/5] OMAP4: Fix CLKR/FSR mux for port with 6 pin mode   Peter Ujfalusi
• [PATCH 1/5] OMAP2/3: mcbsp: Check McBSP port number in CLKR/FSR mux callback   Peter Ujfalusi
• [PATCH 2/5] OMAP: mcbsp: Signle function for CLKR/FSR source mux configuration   Peter Ujfalusi
• [PATCH 3/5] ASoC: omap-mcbsp: Use the new interface for configuring CLKR/FSR mux   Peter Ujfalusi
• [PATCH 4/5] OMAP: mcbsp: Remove old CLKR/FSR mux functions   Peter Ujfalusi
• [PATCH 5/5] OMAP4: mcbsp: Callback function for McBSP4 CLKR/FSR mux selection   Peter Ujfalusi
• [PATCH v2 8/9] OMAP4: omap4panda: Enable audio support   Tony Lindgren
• [PATCH v2 4/9] ASoC: twl6040: Convert MICBIAS to SUPPLY widget   Mark Brown
• [PATCH 3/5] ASoC: omap-mcbsp: Use the new interface for configuring CLKR/FSR mux   Mark Brown
• [PATCH v2] ARM: net: JIT compiler for packet filters   David Laight
• [PATCH] misc: max8925_onkey: add function to work as wakeup source   Dmitry Torokhov
• [PATCH] input: serio: ams-delta: toggle keyboard power over GPIO   Dmitry Torokhov
• [RFC PATCH v2 2/2] ARM: imx: Add mx5 cpuidle implmentation   Mark Brown
• [PATCH v2 4/9] ASoC: twl6040: Convert MICBIAS to SUPPLY widget   Peter Ujfalusi
• [PATCH] input: serio: ams-delta: toggle keyboard power over GPIO   Tony Lindgren
• [PATCH v2 8/9] OMAP4: omap4panda: Enable audio support   Peter Ujfalusi
• [RFC PATCH v2 1/2] cpuidle: Add common init interface and idle functionality   Mark Brown
• [GIT PULL] ARM: OMAP: device PM constraints: preparatory support   Tony Lindgren
• [PATCH v2 4/9] ASoC: twl6040: Convert MICBIAS to SUPPLY widget   Mark Brown
• Oops in guest after ioremap() on ARMv7   Catalin Marinas
• [PATCH] ARM: S3C64XX: Add basic cpuidle driver   Mark Brown
• [PATCH v2 8/9] OMAP4: omap4panda: Enable audio support   Tony Lindgren
• [PATCH 01/10] arm: omap4: fix kconfig warning   Tony Lindgren
• [PATCH 03/10] arm: omap2: fix omap3 touchbook kconfig warning   Tony Lindgren
• [PATCH 04/10] arm: omap2: fix regulator warnings   Tony Lindgren
• [PATCH v2 8/9] OMAP4: omap4panda: Enable audio support   Peter Ujfalusi
• Oops in guest after ioremap() on ARMv7   David Vrabel
• [GIT PULL] ARM: amba: Enable module alias autogeneration for AMBA drivers   Russell King - ARM Linux
• [PATCH] ARM: OMAP: hsmmc: add max_freq field   Tony Lindgren
• [PATCH 1/1] msm: DMAEngine: Add DMAEngine driver based on old MSM DMA APIs   David Brown
• [PATCH v2 06/15] ARM: local timers: switch tegra to standalone smp_twd   Colin Cross
• Oops in guest after ioremap() on ARMv7   Russell King - ARM Linux
• [PATCH v2 00/15] Make SMP timers standalone   Russell King - ARM Linux
• [PATCH v3 0/9] OMAP4: ASoC: Support for PandaBoard family   Peter Ujfalusi
• [PATCH v3 1/9] include: platform_data: Platform data header for OMAP4 ASoC audio   Peter Ujfalusi
• [PATCH v3 2/9] OMAP4: 4430sdp: Register platform device for OMAP4 audio   Peter Ujfalusi
• [PATCH v3 3/9] ASoC: omap-abe-twl6040: Convert to platform deriver   Peter Ujfalusi
• [PATCH v3 4/9] ASoC: twl6040: Convert MICBIAS to SUPPLY widget   Peter Ujfalusi
• [PATCH v3 5/9] ASoC: omap-abe-twl6040: Add complete DAPM routing   Peter Ujfalusi
• [PATCH v3 6/9] ASoC: omap-abe-twl6040: DAI link selection based on platform data   Peter Ujfalusi
• [PATCH v3 7/9] ASoC: omap-abe-twl6040: Configure card according to platform data   Peter Ujfalusi
• [PATCH v3 8/9] OMAP4: omap4panda: Enable audio support   Peter Ujfalusi
• [PATCH v3 9/9] ASoC: Kconfig: OMAP4: Enable support for PandaBoards   Peter Ujfalusi
• [PATCH v3 2/9] OMAP4: 4430sdp: Register platform device for OMAP4 audio   Tony Lindgren
• [PATCH] ARM: OMAP: hsmmc: add max_freq field   Kishore Kadiyala
• [PATCH v3 8/9] OMAP4: omap4panda: Enable audio support   Tony Lindgren
• [PATCH] pxa/hx4700: Fix PXA_GPIO_IRQ_BASE/IRQ_NUM values   Dmitry Artamonow
• [PATCH 01/10] arm: omap4: fix kconfig warning   Felipe Contreras
• [PATCH v2 01/15] ARM: local timers: allow smp_twd to be used standalone   Russell King - ARM Linux
• insmod problem on ARM with more than 16MB of RAM?   Russell King - ARM Linux
• [PATCH 01/10] arm: omap4: fix kconfig warning   Tony Lindgren
• [PATCH] arm/tegra: Support Tegra30 in decompressor UART setup   Stephen Warren
• [PATCH 0/4] arm: Remove Telechips subarchitecture   Hans J. Koch
• [linux-pm] [PATCH 0/3] coupled cpuidle state support   Colin Cross
• [PATCH 1/4] Remove Telechips ARM subarch from MAINTAINERS   Hans J. Koch
• [PATCH 2/4] arm: Remove TCC subarch from Kconfig/Makefile   Hans J. Koch
• [PATCH 3/4] arm: Remove mach-tcc8k directory   Hans J. Koch
• [PATCH 4/4] arm: Remove plat-tcc directory   Hans J. Koch
• [PATCH] tty: serial: imx: move del_timer_sync() to avoid potential deadlock   Eric Miao
• Oops in guest after ioremap() on ARMv7   Catalin Marinas
• [RFC PATCH v2 1/2] cpuidle: Add common init interface and idle functionality   Rob Herring
• [PATCH] ARM: OMAP: hsmmc: add max_freq field   Daniel Mack
• [PATCH] arm/tegra: dma: fix buildbreak for !CONFIG_TEGRA_SYSTEM_DMA   Olof Johansson
• [PATCH] arm/tegra: dma: fix buildbreak for !CONFIG_TEGRA_SYSTEM_DMA   Stephen Warren
• fix implicit use of page.h   Bjorn Helgaas
• [PATCH 0/9] arm/tegra: fuse cleanup and emc device tree support   Olof Johansson
• [PATCH 1/9] arm/tegra: Don't WARN_ON() for too early dma channel allocations   Olof Johansson
• [PATCH 2/9] arm/tegra: use APB DMA for accessing APB devices   Olof Johansson
• [PATCH 3/9] arm/tegra: fuse: use apbio dma for register access   Olof Johansson
• [PATCH 4/9] arm/tegra: fuse: add functions to access chip revision   Olof Johansson
• [PATCH 5/9] arm/tegra: fuse: add bct strapping reading   Olof Johansson
• [PATCH 6/9] arm/tegra: emc: convert tegra2_emc to a platform driver   Olof Johansson
• [PATCH 7/9] arm/tegra: emc: device tree bindings   Olof Johansson
• [PATCH 8/9] arm/tegra: seaboard: add EMC table to device tree   Olof Johansson
• [PATCH 9/9] arm/tegra: emc: device tree support   Olof Johansson
• [PATCH v5] ARM: net: JIT compiler for packet filters   Mircea Gherzan
• Very sparse and high interrupt map with SPARSE_IRQ   Michael Bohan
• [PATCH v2] ARM: net: JIT compiler for packet filters   Nicolas Pitre
• [PATCH] dt/tegra: seaboard: add i2c devices   Olof Johansson
• init_kprobes() takes too much time during boot up   Eric Miao
• Atmel at91x40 ("EB01" eval board) resurected   Phil Budne
• init_kprobes() takes too much time during boot up   Nicolas Pitre
• [PATCH v5] ARM: net: JIT compiler for packet filters   Eric Dumazet
• [Linaro-mm-sig] [RFC v3 0/2] Introduce DMA buffer sharing mechanism   Semwal, Sumit
• [PATCH v3 2/9] OMAP4: 4430sdp: Register platform device for OMAP4 audio   Shilimkar, Santosh
• [PATCH v3 8/9] OMAP4: omap4panda: Enable audio support   Shilimkar, Santosh
• [PATCH v2 07/15] ARM: local timers: switch omap4 to standalone smp_twd   Shilimkar, Santosh
• [PATCH] ARM: smp_twd: make sure timer is stopped before registering it   Shilimkar, Santosh
• [QUESTION] How to set static/dynamic dependency between clock domains   Ming Lei
• [QUESTION] How to set static/dynamic dependency between clock domains   Shilimkar, Santosh
• [QUESTION] How to set static/dynamic dependency between clock domains   Cousson, Benoit
• [QUESTION] How to set static/dynamic dependency between clock domains   Ming Lei
• [PATCH v3 00/11] OMAP4: Add DT support for i2c and twl6030   Cousson, Benoit
• [RFC PATCH v2 4/8] media: videobuf2: introduce VIDEOBUF2_PAGE memops   Ming Lei
• [RFC PATCH v2 4/8] media: videobuf2: introduce VIDEOBUF2_PAGE memops   Marek Szyprowski
• [QUESTION] How to set static/dynamic dependency between clock domains   Shilimkar, Santosh
• [PATCH v2 0/5] ARM: OMAP2+: Interrupt controllers adaptation to DT   Cousson, Benoit
• [RFC PATCH v2 4/8] media: videobuf2: introduce VIDEOBUF2_PAGE memops   Ming Lei
• [RFC v3 1/2] dma-buf: Introduce dma buffer sharing mechanism   Semwal, Sumit
• [Linaro-mm-sig] [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Semwal, Sumit
• [Linaro-mm-sig] [RFC v3 0/2] Introduce DMA buffer sharing mechanism   Semwal, Sumit
• [PATCH 0/5] OMAP4: Fix CLKR/FSR mux for port with 6 pin mode   Jarkko Nikula
• [PATCH v3 1/9] include: platform_data: Platform data header for OMAP4 ASoC audio   Mark Brown
• [RFC PATCH v2 4/8] media: videobuf2: introduce VIDEOBUF2_PAGE memops   Marek Szyprowski
• [PATCH] ARM: smp_twd: make sure timer is stopped before registering it   Marc Zyngier
• [PATCH] ARM: smp_twd: make sure timer is stopped before registering it   Shilimkar, Santosh
• [PATCH 4/9] arm/tegra: fuse: add functions to access chip revision   Henning Heinold
• [RESENDx2] [PULL] virtio: fix barriers for virtio-mmio   Ohad Ben-Cohen
• [rtc-linux] Re: [PATCH v2 0/4] Implement RTC support for S3C2443/S3C2416/S3C2450   Mark Brown
• Adding remoteproc/rpmsg to linux-next   Ohad Ben-Cohen
• [PATCH] exynos4: Frame buffer clock source changed to "lcd".   Evgeny Voevodin
• init_kprobes() takes too much time during boot up   Jon Medhurst (Tixy)
• Oops in guest after ioremap() on ARMv7   Ian Campbell
• [RFC PATCH v2 4/8] media: videobuf2: introduce VIDEOBUF2_PAGE memops   Ming Lei
• [PATCH 00/14] DMA-mapping framework redesign preparation   Marek Szyprowski
• [PATCH 01/14] common: dma-mapping: introduce alloc_attrs and free_attrs methods   Marek Szyprowski
• [PATCH 02/14] X86: adapt for dma_map_ops changes   Marek Szyprowski
• [PATCH 03/14] MIPS: adapt for dma_map_ops changes   Marek Szyprowski
• [PATCH 04/14] PowerPC: adapt for dma_map_ops changes   Marek Szyprowski
• [PATCH 05/14] IA64: adapt for dma_map_ops changes   Marek Szyprowski
• [PATCH 06/14] SPARC: adapt for dma_map_ops changes   Marek Szyprowski
• [PATCH 07/14] Alpha: adapt for dma_map_ops changes   Marek Szyprowski
• [PATCH 08/14] SH: adapt for dma_map_ops changes   Marek Szyprowski
• [PATCH 09/14] Microblaze: adapt for dma_map_ops changes   Marek Szyprowski
• [PATCH 10/14] Unicore32: adapt for dma_map_ops changes   Marek Szyprowski
• [PATCH 11/14] common: dma-mapping: remove old alloc_coherent and free_coherent methods   Marek Szyprowski
• [PATCH 12/14] common: dma-mapping: introduce mmap method   Marek Szyprowski
• [PATCH 13/14] common: DMA-mapping: add WRITE_COMBINE attribute   Marek Szyprowski
• [PATCH 14/14] common: DMA-mapping: add NON-CONSISTENT attribute   Marek Szyprowski
• [PATCH v2] davinci: DA850 EVM: OHCI platform code   Manjunathappa, Prakash
• [PATCH v4 4/7] cpufreq: add clk-reg cpufreq driver   Mark Brown
• [PATCH] regulator: max8925: fix enabled/disabled judgement mistake   Haojian Zhuang
• [PATCH] misc: max8925_onkey: add function to work as wakeup source   Haojian Zhuang
• [PATCH] ARM: OMAP: hsmmc: add max_freq field   T Krishnamoorthy, Balaji
• DMA: PL330: Merge PL330 drivers   Vinod Koul
• [PATCH v2 08/19] dma: MX3_IPU fix depends   Vinod Koul
• [PATCH v4 1/4] OMAP3: hwmod data: add mmu data for iva and isp   Ramirez Luna, Omar
• [PATCH] dmaengine/dw_dmac: Add support for device_prep_dma_sg   Vinod Koul
• [PATCH 0/4] Fix the left DMA_NONE from dma_transfer_direction migration   Vinod Koul
• [PATCH v2 08/19] dma: MX3_IPU fix depends   Eric Bénard
• [PATCH 5/5] ASoC: mxs: correct 'direction' of device_prep_dma_cyclic   Vinod Koul
• [PATCH v2 08/19] dma: MX3_IPU fix depends   Vinod Koul
• [PATCH 1/2] ARM: SAMSUNG: Guard against multiple inclusion of plat/dma.h   Mark Brown
• [PATCH 2/2] ARM: SAMSUNG: dma-ops.h needs mach/dma.h   Mark Brown
• [PATCH 5/5] ASoC: mxs: correct 'direction' of device_prep_dma_cyclic   Mark Brown
• [PATCH v4 4/4] OMAP3/4: iommu: adapt to runtime pm   Ramirez Luna, Omar
• [PATCH 5/5] ASoC: mxs: correct 'direction' of device_prep_dma_cyclic   Vinod Koul
• [PATCH 00/14] DMA-mapping framework redesign preparation   Matthew Wilcox
• [PATCH v4 4/4] OMAP3/4: iommu: adapt to runtime pm   Felipe Contreras
• [Linaro-mm-sig] [RFC v2 1/2] dma-buf: Introduce dma buffer sharing mechanism   Rob Clark
• [Linaro-mm-sig] [RFC v3 0/2] Introduce DMA buffer sharing mechanism   Rob Clark
• [PATCH 04/12] dma: mxs-dma: convert to clk_prepare/clk_unprepare   Vinod Koul
• [PATCH] dmaengine: Add support for MEMCPY for imx-dma.   Vinod Koul
• [PATCH 6/9] arch/arm/mach-omap2/devices.c: introduce missing kfree   Julia Lawall
• [PATCH 1/2] ARM: davinci: time.c: group related header files together   Sekhar Nori
• [PATCH 2/2] ARM: davinci: convert sched_clock() to use common infrastructure   Sekhar Nori
• [PATCH 07/12] ARM: S5PV210: introduce arch/arm/mach-s5pv210/common.[ch]   Russell King - ARM Linux
• [PATCH 09/12] ARM: EXYNOS: introduce arch/arm/mach-exynos/common.[ch]   Russell King - ARM Linux
• [PATCH 0/4] Amstrad Delta: access MODEM_RESET GPIO pin over a regulator   Janusz Krzysztofik
• [PATCH 1/4] ARM: OMAP1: ams-delta: set up regulator over modem reset GPIO pin   Janusz Krzysztofik
• [PATCH 2/4] ASoC: cx20442: add bias control over a platform provided regulator   Janusz Krzysztofik
• [PATCH 3/4] ARM: OMAP1: ams-delta: update the modem to use regulator API   Janusz Krzysztofik
• [PATCH 4/4] ASoC: OMAP: ams-delta: drop .set_bias_level callback   Janusz Krzysztofik
• [GIT PULL] Samsung devel-dt for v3.3   Kukjin Kim
• [GIT PULL] Samsung cleanup-mmc for v3.3   Kukjin Kim
• [GIT PULL] Samsung devel-spi for v3.3   Kukjin Kim
• [GIT PULL] Samsung cleanup-spi for v3.3   Kukjin Kim
• [PATCH 09/12] ARM: EXYNOS: introduce arch/arm/mach-exynos/common.[ch]   Kukjin Kim
• [PATCH 1/2] ARM: SAMSUNG: Guard against multiple inclusion of plat/dma.h   Kukjin Kim
• [PATCH 2/2] ARM: SAMSUNG: dma-ops.h needs mach/dma.h   Kukjin Kim
• Pull Requeset: Exynos4 Register Address Update for Devfreq Drivers.   Kukjin Kim
• [RESENDx2] [PULL] virtio: fix barriers for virtio-mmio   Rusty Russell
• [PATCH 00/14] DMA-mapping framework redesign preparation   Benjamin Herrenschmidt
• [PATCH v4 4/7] cpufreq: add clk-reg cpufreq driver   Richard Zhao
• [PATCH v4 4/7] cpufreq: add clk-reg cpufreq driver   Mark Brown
• [PATCH v4 4/7] cpufreq: add clk-reg cpufreq driver   Jamie Iles
• [PATCH v4 4/7] cpufreq: add clk-reg cpufreq driver   Richard Zhao
• [PATCH v4 4/7] cpufreq: add clk-reg cpufreq driver   Richard Zhao
• [PATCH v4 4/7] cpufreq: add clk-reg cpufreq driver   Mark Brown
• [PATCH v4 4/7] cpufreq: add clk-reg cpufreq driver   Richard Zhao
• [PATCH 20/20] ARM: big removal of now unused arch_reset()   Linus Walleij
• [PATCH v2] gpio: pl061: convert to use generic irq chip   Linus Walleij
• [PATCH v4 4/4] OMAP3/4: iommu: adapt to runtime pm   Ramirez Luna, Omar
• [PATCH 01/20] ARM: clean up idle handlers   Shawn Guo
• [PATCH 01/20] ARM: clean up idle handlers   Shawn Guo
• [PATCH 11/20] ARM: plat-mxc: hook special idle handlers to arm_pm_idle   Shawn Guo
• [RFC PATCH v3 2/5] pinctrl: add dt binding support for pinmux mappings   Stephen Warren
• [PATCH-V2 0/2] arm:omap:am33xx: Add voltage and power domain data   Vaibhav Hiremath
• [PATCH-V2 1/2] arm:omap:am33xx: Add voltage domain data   Vaibhav Hiremath
• [PATCH-V2 2/2] arm:omap:am33xx: Add power domain data   Vaibhav Hiremath
• [PATCH] ARM: imx6q: add support for IRAM   Shawn Guo
• [PATCH v2 11/15] ARM: local timers: switch imx6q to standalone smp_twd   Shawn Guo
• [PATCH v4 1/4] OMAP3: hwmod data: add mmu data for iva and isp   Laurent Pinchart
• [PATCH] ARM: EXYNOS: Adds Samsung TRATS board support   Kyungmin Park
• [rtc-linux] Re: [PATCH v2 0/4] Implement RTC support for S3C2443/S3C2416/S3C2450   Alessandro Zummo
• [PATCH v2 04/10] rtc: rtc-twl: Add DT support for RTC inside twl4030/twl6030   Alessandro Zummo
• [PATCH v5] tty: serial: imx: Allow UART to be a source for wakeup   Shawn Guo
• [PATCH] serial/imx: propagate error from of_alias_get_id instead of using -ENODEV   Shawn Guo
• [PATCH] serial/imx: let probing fail for the dt case without a valid alias   Shawn Guo
• [PATCH 1/2 v2] imx: Add save/restore functions for UART control regs   Shawn Guo
• [PATCH 2/2 v3] imx: add polled io uart methods   Shawn Guo
• [PATCH] tty: serial: imx: move del_timer_sync() to avoid potential deadlock   Shawn Guo
• [PATCH] ARM: mx5: use generic irq chip pm interface for pm functions on   Shawn Guo
• [PATCH] ARM: imx6q: build pm code only when CONFIG_PM selected   Shawn Guo
• [PATCH] ARM: imx6q: resume PL310 only when CACHE_L2X0 defined   Shawn Guo
• [PATCH] ARM: EXYNOS: Adds Samsung TRATS board support   HeungJun, Kim
• Pull Requeset: Exynos4 Register Address Update for Devfreq Drivers.   MyungJoo Ham
• [Linaro-mm-sig] [RFC v3 0/2] Introduce DMA buffer sharing mechanism   Semwal, Sumit
• [PATCH] ARM: imx6q: resume PL310 only when CACHE_L2X0 defined   Eric Miao
• [PATCH 0/3] Introduce DMA buffer sharing mechanism   Sumit Semwal
• [PATCH 1/3] dma-buf: Introduce dma buffer sharing mechanism   Sumit Semwal
• [PATCH 2/3] dma-buf: Documentation for buffer sharing framework   Sumit Semwal
• [PATCH 3/3] dma-buf: mark EXPERIMENTAL for 1st release.   Sumit Semwal
• [PATCH] arm/tegra: Support Tegra30 in decompressor UART setup   Sergei Shtylyov
• [PATCH] ARM: S3C64XX: Reduce residency requirement for cpuidle WFI mode   Mark Brown
• [PATCH 2/4] ASoC: cx20442: add bias control over a platform provided regulator   Mark Brown
• [PATCH 4/4] ASoC: OMAP: ams-delta: drop .set_bias_level callback   Mark Brown
• [PATCH] arm: oprofile: fix linkage issue   Sergei Shtylyov
• [PATCH v4 4/7] cpufreq: add clk-reg cpufreq driver   Mark Brown
• [PATCH] ARM: imx6q: add support for IRAM   Jason Chen
• [PATCH 1/2] PM / Domains: Add OF support   Mark Brown
• [alsa-devel] [PATCH 2/4] ASoC: cx20442: add bias control over a platform provided regulator   Janusz Krzysztofik
• [PATCH 4/4] ASoC: OMAP: ams-delta: drop .set_bias_level callback   Janusz Krzysztofik
• [PATCH] ARM: imx6q: add support for IRAM   Shawn Guo
• [PATCH v4 4/7] cpufreq: add clk-reg cpufreq driver   Richard Zhao
• [PATCH v4 4/7] cpufreq: add clk-reg cpufreq driver   Mark Brown
• [PATCH 4/4] ASoC: OMAP: ams-delta: drop .set_bias_level callback   Mark Brown
• [PATCH 2/2] ARM: Exynos: Hook up power domains to generic power domain infrastructure   Mark Brown
• [PATCH 1/2] PM / Domains: Add OF support   Rafael J. Wysocki
• [PATCH 1/2] PM / Domains: Add OF support   Mark Brown
• [PATCH 4/4] ASoC: OMAP: ams-delta: drop .set_bias_level callback   Janusz Krzysztofik
• [PATCH 1/2] PM / Domains: Add OF support   Rafael J. Wysocki
• [PATCH 0/2] Support for TeeJet Mt.Ventoux   Ilya Yanok
• [PATCH 1/2] mt_ventoux: very basic support for TeeJet Mt.Ventoux board   Ilya Yanok
• [PATCH 2/2] mt_ventoux: support for TeeJet Mt.Ventoux board   Ilya Yanok
• [PATCH] ARM: EXYNOS: Adds Samsung TRATS board support   Kukjin Kim
• [PATCH] ARM: EXYNOS: Adds Samsung TRATS board support   Kukjin Kim
• [rtc-linux] Re: [PATCH v2 0/4] Implement RTC support for S3C2443/S3C2416/S3C2450   Kukjin Kim
• [PATCH] ARM: EXYNOS: Adds Samsung TRATS board support   Kyungmin Park
• [PATCH] ARM: EXYNOS: Adds Samsung TRATS board support   Kukjin Kim
• [PATCH 1/2] ARM: imx: add dt support of IRAM   Jason Chen
• [PATCH 2/2] ARM: imx6q: add support for IRAM   Jason Chen
• [PATCH] ARM: EXYNOS: Adds Samsung TRATS board support   Kyungmin Park
• [PATCH v4 4/7] cpufreq: add clk-reg cpufreq driver   Richard Zhao
• Is Pandaboard cpuhotplug working stably?   Varun Wadekar
• [PATCH] ARM: Exynos: Remove duplicated SROMC static memory mapping   Thomas Abraham
• [PATCH V1] ARM: EXYNOS: Adds Samsung TRATS board support   HeungJun, Kim
• [PATCH 1/2] ARM: imx: add dt support of IRAM   Shawn Guo
• [PATCH 09/12] ARM: EXYNOS: introduce arch/arm/mach-exynos/common.[ch]   Kukjin Kim
• [PATCH 2/2] mt_ventoux: support for TeeJet Mt.Ventoux board   Igor Grinberg
• [PATCH V5 0/7] add a generic cpufreq driver   Richard Zhao
• [PATCH V5 1/7] ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp   Richard Zhao
• [PATCH V5 2/7] arm/imx: cpufreq: remove loops_per_jiffy recalculate for smp   Richard Zhao
• [PATCH V5 3/7] cpufreq: OMAP: remove loops_per_jiffy recalculate for smp   Richard Zhao
• [PATCH V5 4/7] cpufreq: add clk-reg cpufreq driver   Richard Zhao
• [PATCH V5 5/7] dts/imx6q: add cpufreq property   Richard Zhao
• [PATCH V5 6/7] arm/imx6q: register arm_clk as cpu to clkdev   Richard Zhao
• [PATCH V5 7/7] arm/imx6q: select ARCH_HAS_CPUFREQ   Richard Zhao
• [PATCH 00/14] DMA-mapping framework redesign preparation   Marek Szyprowski
• [PATCH RESEND] ARM: pxa: fix error handling in pxa2xx_drv_pcmcia_probe   Axel Lin
• [PATCH RESEND] ARM: pxa: fix error handling in pxa2xx_drv_pcmcia_probe   Eric Miao
• [PATCH RESEND] ARM: pxa: fix error handling in pxa2xx_drv_pcmcia_probe   Haojian Zhuang
• [PATCH RESEND] ARM: pxa: fix error handling in pxa2xx_drv_pcmcia_probe   Eric Miao
• [PATCH v4 4/4] OMAP3/4: iommu: adapt to runtime pm   Felipe Contreras
• [GIT PULL] Samsung devel-mmc-spi for v3.3   Kukjin Kim
• [GIT PULL] Samsung devel-ohci for v3.3   Kukjin Kim
• [PATCH v4 4/7] cpufreq: add clk-reg cpufreq driver   Mark Brown
• [PATCH v5 REPOST 1/5] ARM: l2x0/pl310: Refactor Kconfig to be more maintainable   Barry Song
• [alsa-devel] [PATCH 2/4] ASoC: cx20442: add bias control over a platform provided regulator   Janusz Krzysztofik
• [RFC PATCH v3 2/5] pinctrl: add dt binding support for pinmux mappings   Dong Aisheng-B29396
• [PATCH V5 4/7] cpufreq: add clk-reg cpufreq driver   Shawn Guo
• [PATCH RESEND] ARM: pxa: fix error handling in pxa2xx_drv_pcmcia_probe   Marek Vasut
• [PATCH v9 REPOST 00/25] gpio/omap: driver cleanup and fixes   Tarun Kanti DebBarma
• [PATCH v9 REPOST 01/25] gpio/omap: remove dependency on gpio_bank_count   Tarun Kanti DebBarma
• [PATCH v9 REPOST 02/25] gpio/omap: use flag to identify wakeup domain   Tarun Kanti DebBarma
• [PATCH v9 REPOST 03/25] gpio/omap: make gpio_context part of gpio_bank structure   Tarun Kanti DebBarma
• [PATCH v9 REPOST 04/25] gpio/omap: handle save/restore context in GPIO driver   Tarun Kanti DebBarma
• [PATCH v9 REPOST 05/25] gpio/omap: make non-wakeup GPIO part of pdata   Tarun Kanti DebBarma
• [PATCH v9 REPOST 06/25] gpio/omap: avoid cpu checks during module ena/disable   Tarun Kanti DebBarma
• [PATCH v9 REPOST 07/25] gpio/omap: further cleanup using wkup_en register   Tarun Kanti DebBarma
• [PATCH v9 REPOST 08/25] gpio/omap: use level/edge detect reg offsets   Tarun Kanti DebBarma
• [PATCH v9 REPOST 09/25] gpio/omap: remove hardcoded offsets in context save/restore   Tarun Kanti DebBarma
• [PATCH v9 REPOST 10/25] gpio/omap: cleanup set_gpio_triggering function   Tarun Kanti DebBarma
• [PATCH v9 REPOST 11/25] gpio/omap: cleanup omap_gpio_mod_init function   Tarun Kanti DebBarma
• [PATCH v9 REPOST 12/25] gpio/omap: use pinctrl offset instead of macro   Tarun Kanti DebBarma
• [PATCH v9 REPOST 13/25] gpio/omap: remove unnecessary bit-masking for read access   Tarun Kanti DebBarma
• [PATCH v9 REPOST 14/25] gpio/omap: remove bank->method & METHOD_* macros   Tarun Kanti DebBarma
• [PATCH v9 REPOST 15/25] gpio/omap: fix bankwidth for OMAP7xx MPUIO   Tarun Kanti DebBarma
• [PATCH v9 REPOST 16/25] gpio/omap: use pm-runtime framework   Tarun Kanti DebBarma
• [PATCH v9 REPOST 17/25] gpio/omap: optimize suspend and resume functions   Tarun Kanti DebBarma
• [PATCH v9 REPOST 18/25] gpio/omap: cleanup prepare_for_idle and resume_after_idle   Tarun Kanti DebBarma
• [PATCH v9 REPOST 19/25] gpio/omap: fix debounce clock handling   Tarun Kanti DebBarma
• [PATCH v9 REPOST 20/25] gpio/omap: fix incorrect access of debounce module   Tarun Kanti DebBarma
• [PATCH v9 REPOST 21/25] gpio/omap: remove omap_gpio_save_context overhead   Tarun Kanti DebBarma
• [PATCH v9 REPOST 22/25] gpio/omap: save and restore debounce registers   Tarun Kanti DebBarma
• [PATCH v9 REPOST 23/25] gpio/omap: enable irq at the end of all configuration in restore   Tarun Kanti DebBarma
• [PATCH v9 REPOST 24/25] gpio/omap: restore OE only after setting the output level   Tarun Kanti DebBarma
• [PATCH v9 REPOST 25/25] gpio/omap: handle set_dataout reg capable IP on restore   Tarun Kanti DebBarma
• [PATCH 1/2] ARM: imx: add dt support of IRAM   Rob Herring
• [alsa-devel] [PATCH 2/4] ASoC: cx20442: add bias control over a platform provided regulator   Mark Brown
• [PATCH v5] ARM: net: JIT compiler for packet filters   Rabin Vincent
• [PATCH 00/14] DMA-mapping framework redesign preparation   James Bottomley
• [PATCH] ARM/of: allow *machine_desc.dt_compat to be const   Rob Herring
• [GIT PULL] omap hwmod changes for v3.3 merge window   Arnd Bergmann
• [GIT PULL] omap ehci related changes for v3.3 merge window   Arnd Bergmann
• [PATCH 2/2] ARM: Exynos: Hook up power domains to generic power domain infrastructure   Sylwester Nawrocki
• [GIT PULL 1/5] Tegra cleanups for 3.3   Arnd Bergmann
• [GIT PULL 1/5] Tegra cleanups for 3.3   Olof Johansson
• [GIT PULL 2/5] Tegra devicetree updates for 3.3   Arnd Bergmann
• [rtc-linux] Re: [PATCH v2 0/4] Implement RTC support for S3C2443/S3C2416/S3C2450   Alessandro Zummo
• [GIT PULL 3/5] Tegra SoC updates for 3.3   Arnd Bergmann
• [PATCH 2/2] mt_ventoux: support for TeeJet Mt.Ventoux board   Ilya Yanok
• [PATCH 3/3 v3] ARM: EXYNOS4: Delete the power domain code depend on samsung SoC   Sylwester Nawrocki
• [GIT PULL 4/5] Tegra board updates for 3.3   Arnd Bergmann
• [PATCH V2] mt_ventoux: support for TeeJet Mt.Ventoux board   Ilya Yanok
• [PATCH 2/2] ARM: Exynos: Hook up power domains to generic power domain infrastructure   Sylwester Nawrocki
• [GIT PULL 4/5] Tegra board updates for 3.3   Olof Johansson
• [GIT PULL 2/5] Tegra devicetree updates for 3.3   Olof Johansson
• [PATCH V2] OMAP3: hwmod_data: register dss hwmods after dss_core   Ilya Yanok
• [GIT PULL] Samsung devel-dt for v3.3   Arnd Bergmann
• [GIT PULL] Samsung devel-ohci for v3.3   Arnd Bergmann
• [GIT PULL] Samsung cleanup-spi for v3.3   Arnd Bergmann
• [GIT PULL] Samsung devel-mmc-spi for v3.3   Arnd Bergmann
• [PATCH RESEND] ARM: pxa: fix error handling in pxa2xx_drv_pcmcia_probe   Haojian Zhuang
• [PATCH V5 4/7] cpufreq: add clk-reg cpufreq driver   Richard Zhao
• [PATCH V5 4/7] cpufreq: add clk-reg cpufreq driver   Shawn Guo
• [PATCH 1/3] dma-buf: Introduce dma buffer sharing mechanism   InKi Dae
• [PATCH V5 4/7] cpufreq: add clk-reg cpufreq driver   Richard Zhao
• [PATCH V5 4/7] cpufreq: add clk-reg cpufreq driver   Shawn Guo
• [PATCH V5 4/7] cpufreq: add clk-reg cpufreq driver   Richard Zhao
• [PATCH 1/2] PM / Domains: Add OF support   Thomas Abraham
• [PATCH 0/2] Input: tegra-kbc - configure through device tree   Olof Johansson
• [PATCH 1/2] Input: tegra-kbc - add device tree bindings   Olof Johansson
• [PATCH 2/2] Input: tegra-kbc - add default chromeos map   Olof Johansson
• [PATCH 2/2] Input: tegra-kbc - add default chromeos map   Olof Johansson
• [PATCH 2/2] ARM: Exynos: Hook up power domains to generic power domain infrastructure   Thomas Abraham
• [PATCH v2 0/2] Input: tegra-kbc - configure through device tree   Olof Johansson
• [PATCH v2 1/2] Input: tegra-kbc - add device tree bindings   Olof Johansson
• [PATCH v2 2/2] Input: tegra-kbc - add default chromeos map   Olof Johansson
• [PATCH 1/2] ARM: imx: add dt support of IRAM   Shawn Guo
• [PATCH v2 1/2] Input: tegra-kbc - add device tree bindings   Dmitry Torokhov
• [PATCH v2 2/2] Input: tegra-kbc - add default chromeos map   Dmitry Torokhov
• [PATCH 0/6] arch part update of s3c-hsotg driver   Joonyoung Shim
• [PATCH 1/6] ARM: S3C64XX: Add usb otg phy control   Joonyoung Shim
• [PATCH 2/6] ARM: SAMSUNG: Fix memory size for hsotg   Joonyoung Shim
• [PATCH 3/6] ARM: EXYNOS: Add usb otg phy control for EXYNOS4210   Joonyoung Shim
• [PATCH 4/6] ARM: EXYNOS: Add hsotg device for NURI board   Joonyoung Shim
• [PATCH 5/6] USB: s3c-hsotg: Add platform data callbacks for phy control   Joonyoung Shim
• [PATCH 6/6] USB: s3c-hsotg: Add regulator support   Joonyoung Shim
• [PATCH v2 1/2] Input: tegra-kbc - add device tree bindings   Olof Johansson
• [PATCH v5 2/2] input: samsung-keypad: Add device tree support   Olof Johansson
• [PATCH v2 2/2] Input: tegra-kbc - add default chromeos map   Olof Johansson
• [PATCH] ARM: Exynos: Remove duplicated SROMC static memory mapping   Kukjin Kim
• [PATCHv2 resend] Fix compilation error when CONFIG_CPU_FREQ_S3C24XX_DEBUGFS selected.   Kukjin Kim
• [GIT PULL] Samsung devel-dt for v3.3   Kukjin Kim
• [GIT PULL] Samsung cleanup-spi for v3.3   Kukjin Kim
• [GIT PULL] Samsung devel-ohci for v3.3   Kukjin Kim
• [GIT PULL] Samsung devel-mmc-spi for v3.3   Kukjin Kim
• Renaming MACH_TYPE_KINETIS_K60 into MACH_TYPE_KINETIS   Alexander Potashev
• Renaming MACH_TYPE_KINETIS_K60 into MACH_TYPE_KINETIS   Marek Vasut
• Renaming MACH_TYPE_KINETIS_K60 into MACH_TYPE_KINETIS   Alexander Potashev
• [PATCH 2/2] ARM: Exynos: Hook up power domains to generic power domain infrastructure   Sylwester Nawrocki
• [PATCH] at91: fix at91rm9200 soc subtype handling   Veli-Pekka Peltola
• [PATCH] ARM: S3C64XX: Remove unconditional power domain disables   Mark Brown
• [PATCH V5 4/7] cpufreq: add clk-reg cpufreq driver   Mark Brown
• [PATCH V5 4/7] cpufreq: add clk-reg cpufreq driver   Richard Zhao
• [PATCH] ARM: S3C64XX: Fix build of Cragganmore after SPI changes   Mark Brown
• [PATCH V5 4/7] cpufreq: add clk-reg cpufreq driver   Mark Brown
• [PATCH 1/2] ARM: imx: add dt support of IRAM   Eric Miao
• [PATCH] ARM: S3C64XX: Remove hsmmc1 from Cragganmore   Mark Brown
• [PATCH] ARM: S3C64XX: Remove hsmmc1 from Cragganmore   Mark Brown
• [PATCH V5 4/7] cpufreq: add clk-reg cpufreq driver   Richard Zhao
• [PATCH V5 4/7] cpufreq: add clk-reg cpufreq driver   Mark Brown
• [PATCH 00/14] DMA-mapping framework redesign preparation   Marek Szyprowski
• [PATCH V5 4/7] cpufreq: add clk-reg cpufreq driver   Mark Brown
• [PATCH V5 4/7] cpufreq: add clk-reg cpufreq driver   Shawn Guo
• [PATCH] ARM: S3C64XX: Remove hsmmc1 from Cragganmore   Mark Brown
• [PATCH V5 4/7] cpufreq: add clk-reg cpufreq driver   Shawn Guo
• [GIT PULL 4/5] Tegra board updates for 3.3   Shawn Guo
• AW: [PATCH v7 0/5] AT91: replace broken TWI driver i2c-at91.c   Carsten Behling
• No subject   Shawn Guo
• [GIT PULL] mxs: clk-prepare for 3.3   Shawn Guo
• [GIT PULL] imx: pm for 3.3   Shawn Guo
• [PATCH v6] ARM: net: JIT compiler for packet filters   Mircea Gherzan
• [PATCH v3] ARM: net: JIT compiler for packet filters   Mircea Gherzan
• Renaming MACH_TYPE_KINETIS_K60 into MACH_TYPE_KINETIS   Marek Vasut
• [PATCH v3] ARM: net: JIT compiler for packet filters   David Miller
• [PATCH v6] ARM: net: JIT compiler for packet filters   Eric Dumazet
• [PATCH 2/2] ARM: Exynos: Hook up power domains to generic power domain infrastructure   Sylwester Nawrocki
• [PATCHv2 resend] Fix compilation error when CONFIG_CPU_FREQ_S3C24XX_DEBUGFS selected.   Denis Kuzmenko
• [PATCH v4] s3c/s3c24xx: arm: leds: Make s3c24xx LEDS driver use gpiolib. Fix error disabling pull during probe.   Denis Kuzmenko
• [PATCH 1/2] PM / Domains: Add OF support   Rafael J. Wysocki
• [PATCH] Input: keyboard - add device tree bindings for simple key matrixes   Olof Johansson
• [PATCH] Enable 32 bit flash support for iMX21ADS board   Jaccon Bastiaansen
• [PATCH] Input: keyboard - add device tree bindings for simple key matrixes   Rob Herring
• [PATCH] Input: keyboard - add device tree bindings for simple key matrixes   Olof Johansson
• [PATCH] ARM: S3C64XX: Staticise s3c64xx_init_uarts()   Mark Brown
• [PATCH] ARM: SAMSUNG: Declare struct platform_device in plat/s3c64xx-spi.h   Mark Brown
• [PATCH 1/2] ARM: S3C64XX: Fix the memory mapped GPIOs on Cragganmore   Mark Brown
• [PATCH 2/2] ARM: S3C64XX: Support GPIO LEDs on Cragganmore   Mark Brown
• [PATCH] ARM: S3C64XX: Fix interrupt configuration for PCA935x on Cragganmore   Mark Brown
• [PATCH] ARM: S3C64XX: Add hookup for Tomatin module on Cragganmore   Mark Brown
• [PATCH v5] Consolidate SRAM support   Richard Zhao
• [PATCH v4] s3c/s3c24xx: arm: leds: Make s3c24xx LEDS driver use gpiolib. Fix error disabling pull during probe.   Mark Brown
• [RFC PATCH v3 2/5] pinctrl: add dt binding support for pinmux mappings   Shawn Guo
• [rtc-linux] Re: [PATCH v2 0/4] Implement RTC support for S3C2443/S3C2416/S3C2450   Kukjin Kim
• [PATCH v4] s3c/s3c24xx: arm: leds: Make s3c24xx LEDS driver use gpiolib. Fix error disabling pull during probe.   Kukjin Kim
• [PATCH V1] ARM: EXYNOS: Adds Samsung TRATS board support   Kukjin Kim
• [PATCH] ARM: S3C64XX: Reduce residency requirement for cpuidle WFI mode   Kukjin Kim
• [PATCH] ARM: S3C64XX: Remove hsmmc1 from Cragganmore   Kukjin Kim
• [PATCH] ARM: S3C64XX: Fix interrupt configuration for PCA935x on Cragganmore   Kukjin Kim
• [PATCH] ARM: S3C64XX: Fix build of Cragganmore after SPI changes   Kukjin Kim
• [PATCH] ARM: S3C64XX: Staticise s3c64xx_init_uarts()   Kukjin Kim
• [PATCH] ARM: S3C64XX: Remove unconditional power domain disables   Kukjin Kim
• [PATCHv2 resend] Fix compilation error when CONFIG_CPU_FREQ_S3C24XX_DEBUGFS selected.   Kukjin Kim
• [PATCH] ARM: SAMSUNG: Declare struct platform_device in plat/s3c64xx-spi.h   Kukjin Kim
• [PATCH 1/2] ARM: S3C64XX: Fix the memory mapped GPIOs on Cragganmore   Kukjin Kim
• [PATCH 2/2] ARM: S3C64XX: Support GPIO LEDs on Cragganmore   Kukjin Kim
• [PATCH V1] ARM: EXYNOS: Adds Samsung TRATS board support   HeungJun, Kim
• [RESENDx2] [PULL] virtio: fix barriers for virtio-mmio   Rusty Russell
• [PATCH v2 1/2] Input: tegra-kbc - add device tree bindings   Stephen Warren
• [PATCH v2 2/2] Input: tegra-kbc - add default chromeos map   Stephen Warren
• [PATCH] Input: keyboard - add device tree bindings for simple key matrixes   Stephen Warren
• [PATCH V5 4/7] cpufreq: add clk-reg cpufreq driver   Richard Zhao
• [PATCH] Input: keyboard - add device tree bindings for simple key matrixes   Olof Johansson
• [PATCH][NET] several cleanups and bugfixes for fec.c   Dirk Behme
• [PATCH v2 2/2] Input: tegra-kbc - add default chromeos map   Olof Johansson
• [RESENDx2] [PULL] virtio: fix barriers for virtio-mmio   Ohad Ben-Cohen
• [PATCH v2 2/2] Input: tegra-kbc - add default chromeos map   Stephen Warren
• [PATCH] Input: keyboard - add device tree bindings for simple key matrixes   Stephen Warren
• [PATCH] Input: keyboard - add device tree bindings for simple key matrixes   Olof Johansson
• [PATCH v2 2/2] Input: tegra-kbc - add default chromeos map   Olof Johansson
• [PATCH][NET] several cleanups and bugfixes for fec.c   Shawn Guo
• [PATCH v5] Consolidate SRAM support   Bedia, Vaibhav
• [PATCH V5 4/7] cpufreq: add clk-reg cpufreq driver   Shawn Guo
• ftrace performance impact with different configuration   Lei Wen
• [PATCH v4] s3c/s3c24xx: arm: leds: Make s3c24xx LEDS driver use gpiolib. Fix error disabling pull during probe.   Vasily
• [PATCH v2 1/2] Input: tegra-kbc - add device tree bindings   Dmitry Torokhov
• [PATCH v2 2/2] Input: tegra-kbc - add default chromeos map   Dmitry Torokhov
• [PATCH v2 2/2] Input: tegra-kbc - add default chromeos map   Olof Johansson
• [PATCH] ARM: S3C64XX: Reduce residency requirement for cpuidle WFI mode   Mark Brown
• [PATCH] ARM: S3C64XX: Fix interrupt configuration for PCA935x on Cragganmore   Mark Brown
• [PATCH 1/2] ARM: S3C64XX: Fix the memory mapped GPIOs on Cragganmore   Mark Brown
• [PATCH V2] Enable 32 bit flash support for iMX21ADS board   Jaccon Bastiaansen
• [PATCH v8 0/2] ommu/exynos: Add IOMMU/System MMU driver for Samsung Exynos   KyongHo Cho
• [PATCH v8 1/2] ARM: EXYNOS: Change System MMU platform device definitions   KyongHo Cho
• [PATCH v8 2/2] iommu/exynos: Add iommu driver for Exynos Platforms   KyongHo Cho
• [PATCHv18 0/11] Contiguous Memory Allocator   Marek Szyprowski
• [PATCH 01/11] mm: page_alloc: set_migratetype_isolate: drain PCP prior to isolating   Marek Szyprowski
• [PATCH 02/11] mm: compaction: introduce isolate_{free,migrate}pages_range().   Marek Szyprowski
• [PATCH 03/11] mm: compaction: export some of the functions   Marek Szyprowski
• [PATCH 04/11] mm: page_alloc: introduce alloc_contig_range()   Marek Szyprowski
• [PATCH 05/11] mm: mmzone: MIGRATE_CMA migration type added   Marek Szyprowski
• [PATCH 06/11] mm: page_isolation: MIGRATE_CMA isolation functions added   Marek Szyprowski
• [PATCH 07/11] mm: add optional memory reclaim in split_free_page()   Marek Szyprowski
• [PATCH 08/11] drivers: add Contiguous Memory Allocator   Marek Szyprowski
• [PATCH 09/11] X86: integrate CMA with DMA-mapping subsystem   Marek Szyprowski
• [PATCH 10/11] ARM: integrate CMA with DMA-mapping subsystem   Marek Szyprowski
• [PATCH 11/11] ARM: Samsung: use CMA for 2 memory banks for s5p-mfc device   Marek Szyprowski
• [PATCH] S3C: fix order of MACH_S3C* checks on GPIO count define   Gusakov Andrey
• [PATCH] S3C: enable debuging over UART3   Gusakov Andrey
• [PATCH] S3C: increase hwmon channels to 10   Gusakov Andrey
• [PATCH] ARM: OMAP: hsmmc: add max_freq field   Daniel Mack
• [PATCH 2/4] ARM: pxa168: Add SDHCI support   Tanmay Upadhyay
• [PATCH] ARM: mx28: Let audio support be built by default   Fabio Estevam
• [PATCH] ARM: mx28: Let audio support be built by default   Marek Vasut
• ftrace performance impact with different configuration   Rabin Vincent
• ftrace performance impact with different configuration   Steven Rostedt
• [RFC PATCH v2 7/8] media: video: introduce object detection driver module   Sylwester Nawrocki
• [PATCH v2] Input: keyboard - add device tree bindings for simple key matrixes   Olof Johansson
• [PATCH] Input: keyboard - add device tree bindings for simple key matrixes   Rob Herring
• [RFC] cpufreq: Add S3C2416/S3C2450 cpufreq driver   Heiko Stübner
• [PATCH v2] Input: keyboard - add device tree bindings for simple key matrixes   Rob Herring
• [PATCH v2] Input: keyboard - add device tree bindings for simple key matrixes   Olof Johansson
• [PATCH v2] Input: keyboard - add device tree bindings for simple key matrixes   Dmitry Torokhov
• [PATCH v2] Input: keyboard - add device tree bindings for simple key matrixes   Olof Johansson
• [PATCH v2] usb: gadget: Fix build error due to selection of USB_FSL_MPH_DR_OF by ARCH_MXC   Fabio Estevam
• [PATCH 2/4] ARM: pxa168: Add SDHCI support   Haojian Zhuang
• Atmel at91x40 ("EB01" eval board) resurected   Greg Ungerer
• [GIT PULL] Samsung Fixes for v3.2   Kukjin Kim
• [PATCH] ARM: S3C64XX: Reduce residency requirement for cpuidle WFI mode   Kukjin Kim
• [PATCH] ARM: S3C64XX: Fix interrupt configuration for PCA935x on Cragganmore   Kukjin Kim
• [PATCH] ARM: S3C64XX: Fix build of Cragganmore after SPI changes   Kukjin Kim
• [PATCH 1/2] ARM: S3C64XX: Fix the memory mapped GPIOs on Cragganmore   Kukjin Kim
• [PATCH] ARM: S3C64XX: Fix build of Cragganmore after SPI changes   Mark Brown
• [PATCH 1/2] ARM: S3C64XX: Fix the memory mapped GPIOs on Cragganmore   Mark Brown
• [PATCH 1/2] ARM: S3C64XX: Enable power management for disk on Cragganmore   Mark Brown
• [PATCH 2/2] ARM: S3C64XX: Enable power management for WiFi on Cragganmore   Mark Brown
• [PATCH RESEND] pxa/hx4700: add platform device and I2C info for AK4641 codec   Axel Lin
• [PATCH V6 0/7] add a generic cpufreq driver   Richard Zhao
• [PATCH V6 1/7] ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp   Richard Zhao
• [PATCH V6 2/7] arm/imx: cpufreq: remove loops_per_jiffy recalculate for smp   Richard Zhao
• [PATCH V6 3/7] cpufreq: OMAP: remove loops_per_jiffy recalculate for smp   Richard Zhao
• [PATCH V6 4/7] cpufreq: add clk-reg cpufreq driver   Richard Zhao
• [PATCH V6 5/7] dts/imx6q: add cpufreq property   Richard Zhao
• [PATCH V6 6/7] arm/imx6q: register arm_clk as cpu to clkdev   Richard Zhao
• [PATCH V6 7/7] arm/imx6q: select ARCH_HAS_CPUFREQ   Richard Zhao
• [PATCH RESEND] pxa/hx4700: add platform device and I2C info for AK4641 codec   Marek Vasut
• [PATCH v2 0/4] Amstrad Delta: access MODEM_RESET GPIO pin over a regulator   Janusz Krzysztofik
• [PATCH v2 1/4] ARM: OMAP1: ams-delta: set up regulator over modem reset GPIO pin   Janusz Krzysztofik
• [PATCH v2 2/4] ASoC: cx20442: add bias control over a platform provided regulator   Janusz Krzysztofik
• [PATCH v2 3/4] ARM: OMAP1: ams-delta: update the modem to use regulator API   Janusz Krzysztofik
• [PATCH v2 4/4] ASoC: OMAP: ams-delta: drop .set_bias_level callback   Janusz Krzysztofik
• [PATCH] MTD/GPMI bugfix : reset the BCH module when it is not MX23   Huang Shijie
• [PATCH 4/4] arm/imx: add mc13892 support into imx51-babbage.dts   Richard Zhao
• [PATCH v2] pxa/hx4700: add platform device and I2C info for AK4641 codec   Axel Lin
• [PATCH] MTD/GPMI : select more modules for GPMI by default   Huang Shijie
• [PATCH 1/1] regulator/fixed: set constraints.apply_uV to 0   Richard Zhao
• [PATCH] MTD/GPMI bugfix : reset the BCH module when it is not MX23   Baruch Siach
• [RFC] cpufreq: Add S3C2416/S3C2450 cpufreq driver   Dron Gus
• [PATCH] MTD/GPMI bugfix : reset the BCH module when it is not MX23   Huang Shijie
• [RFC] cpufreq: Add S3C2416/S3C2450 cpufreq driver   Richard Zhao
• [PATCH v2] MTD/GPMI bugfix : reset the BCH module when it is not MX23   Huang Shijie
• [PATCH] ARM: imx6: fix v7_invalidate_l1 by adding I-Cache invalidation   Shawn Guo
• [PATCH V2] OMAP3: hwmod_data: register dss hwmods after dss_core   Archit Taneja
• [PATCH 1/1] regulator/fixed: set constraints.apply_uV to 0   Mark Brown
• [PATCH v2] usb: gadget: Fix build error due to selection of USB_FSL_MPH_DR_OF by ARCH_MXC   Felipe Balbi
• [PATCH 1/1] regulator/fixed: set constraints.apply_uV to 0   Richard Zhao
• [PATCH] ARM: imx6: fix v7_invalidate_l1 by adding I-Cache invalidation   Jason Liu
• [PATCH 1/1] regulator/fixed: set constraints.apply_uV to 0   Mark Brown
• [PATCH 1/1] regulator/fixed: set constraints.apply_uV to 0   Richard Zhao
• [RFC] cpufreq: Add S3C2416/S3C2450 cpufreq driver   Heiko Stübner
• [RFC] cpufreq: Add S3C2416/S3C2450 cpufreq driver   Heiko Stübner
• ftrace performance impact with different configuration   Philippe Rétornaz
• [PATCH v2] MTD/GPMI bugfix : reset the BCH module when it is not MX23   Marek Vasut
• [PATCH v2] MTD/GPMI bugfix : reset the BCH module when it is not MX23   Wolfram Sang
• [GIT PULL] ARM SoC fixes for 3.2-rc   Olof Johansson
• [PATCHv2 1/2] gpio: add a driver for the Synopsys DesignWare APB GPIO block   Jamie Iles
• [PATCHv2 1/2] gpio: add a driver for the Synopsys DesignWare APB GPIO block   Rob Herring
• ftrace performance impact with different configuration   Steven Rostedt
• ftrace performance impact with different configuration   Philippe Rétornaz
• [PATCH 1/1] regulator/fixed: set constraints.apply_uV to 0   Mark Brown
• [PATCHv2 1/2] gpio: add a driver for the Synopsys DesignWare APB GPIO block   Jamie Iles
• [PATCH 1/1] regulator/fixed: set constraints.apply_uV to 0   Richard Zhao
• [PATCH] ARM: imx6: remove __CPUINIT annotation from v7_invalidate_l1   Shawn Guo
• [PATCH v2] MTD/GPMI bugfix : reset the BCH module when it is not MX23   Huang Shijie
• [PATCH v3] MTD/GPMI bugfix : reset the BCH module when it is not MX23   Huang Shijie
• [PATCH v2] MTD/GPMI bugfix : reset the BCH module when it is not MX23   Marek Vasut
• [PATCH] ARM: imx6: remove __CPUINIT annotation from v7_invalidate_l1   Richard Zhao
• [PATCH v2] MTD/GPMI bugfix : reset the BCH module when it is not MX23   Huang Shijie
• [PATCH v2] MTD/GPMI bugfix : reset the BCH module when it is not MX23   Marek Vasut
• [PATCH] ARM: imx6: remove __CPUINIT annotation from v7_invalidate_l1   Shawn Guo
• [PATCH] MTD/GPMI : select more modules for GPMI by default   Shawn Guo
• [PATCH] MTD/GPMI : select more modules for GPMI by default   Huang Shijie
• [PATCH] ARM: imx6: remove __CPUINIT annotation from v7_invalidate_l1   Richard Zhao
• [PATCH 1/2] ARM: imx6q: add compatible name of iomuxc   Jason Chen
• [PATCH 2/2] ARM: imx6q: add cpu suspend/resume support in IRAM   Jason Chen
• [PATCH] MTD/GPMI : select more modules for GPMI by default   Marek Vasut
• [PATCH] MTD/GPMI : select more modules for GPMI by default   Huang Shijie
• [PATCH] MTD/GPMI : select more modules for GPMI by default   Shawn Guo
• [PATCH] MTD/GPMI : select more modules for GPMI by default   Huang Shijie
• [PATCH] ARM: imx6: fix v7_invalidate_l1 by adding I-Cache invalidation   Shawn Guo
• [PATCH 1/1] regulator/fixed: pass regulator_register of_node   Richard Zhao
• [PATCH v2] pxa/hx4700: add platform device and I2C info for AK4641 codec   Paul Parsons
• [PATCH v5 1/2] pxa/hx4700: Add Synaptics NavPoint (PXA27x SSP/SPI) driver   Paul Parsons
• [PATCH v5 2/2] pxa/hx4700: Add Synaptics NavPoint (PXA27x SSP/SPI) driver   Paul Parsons
• [PATCH v2] MTD/GPMI bugfix : reset the BCH module when it is not MX23   Wolfram Sang
• [PATCH] MTD/GPMI : select more modules for GPMI by default   Wolfram Sang
• [PATCH 1/1] regulator/fixed: set constraints.apply_uV to 0   Mark Brown
• [GIT PULL] tty: serial: imx changes for 3.3   Shawn Guo
• [PATCH] dma/imx-sdma: add wmb before enable/run a channel   Richard Zhao
• [PATCH] dma/imx-sdma: save irq flags when use spin_lock in sdma_tx_submit   Richard Zhao