[PATCH 1/7] arm/imx6: add imx6q sabrelite board support

Shawn Guo shawn.guo at freescale.com
Mon Dec 12 00:40:54 EST 2011


On Mon, Dec 12, 2011 at 11:42:26AM +0800, Richard Zhao wrote:
> Signed-off-by: Richard Zhao <richard.zhao at linaro.org>
> ---
>  arch/arm/boot/dts/imx6q-sabrelite.dts |   54 +++++++++++++++++++++++++++++++++
>  arch/arm/mach-imx/mach-imx6q.c        |    1 +
>  2 files changed, 55 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/boot/dts/imx6q-sabrelite.dts
> 
> diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
> new file mode 100644
> index 0000000..d54363f
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
> @@ -0,0 +1,54 @@
> +/*
> + * Copyright 2011 Freescale Semiconductor, Inc.
> + * Copyright 2011 Linaro Ltd.
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +/dts-v1/;
> +/include/ "imx6q.dtsi"
> +
> +/ {
> +	model = "Freescale i.MX6 Quad SABRE Lite Board";
> +	compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
> +
> +	chosen {
> +		bootargs = "console=ttymxc1,115200";
> +	};
> +
Maybe we can start dropping this, since kernel is now able to get
bootargs from atags even in case that bootloader can not pass dtb
and the dtb is appended to kernel image.

> +	memory {
> +		reg = <0x10000000 0x40000000>;
> +	};
> +
> +	soc {
> +		aips-bus at 02100000 { /* AIPS2 */
> +			enet at 02188000 {
> +				phy-mode = "rgmii";
> +				local-mac-address = [01 04 9F 01 1B 61];

Do we still have no way to figure the mac address from hardware setup
(fuse or something) on sabrelite board?

> +				phy-reset-gpios = <&gpio2 23 0>; /* gpio3 23 */

Nit: If you want to comment it, please comment it in the consistent way,
which is '/* GPIO3_23 */'.

Regards,
Shawn

> +				status = "okay";
> +			};
> +
> +			usdhc at 02198000 { /* uSDHC3 */
> +				cd-gpios = <&gpio6 0 0>; /* GPIO7_0 */
> +				wp-gpios = <&gpio6 1 0>; /* GPIO7_1 */
> +				status = "okay";
> +			};
> +
> +			usdhc at 0219c000 { /* uSDHC4 */
> +				cd-gpios = <&gpio1 6 0>; /* GPIO2_6 */
> +				wp-gpios = <&gpio1 7 0>; /* GPIO2_7 */
> +				status = "okay";
> +			};
> +
> +			uart1: uart at 021e8000 { /* UART2 */
> +				status = "okay";
> +			};
> +		};
> +	};
> +};
> diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
> index 8deb012..d24d6c4 100644
> --- a/arch/arm/mach-imx/mach-imx6q.c
> +++ b/arch/arm/mach-imx/mach-imx6q.c
> @@ -73,6 +73,7 @@ static struct sys_timer imx6q_timer = {
>  
>  static const char *imx6q_dt_compat[] __initdata = {
>  	"fsl,imx6q-sabreauto",
> +	"fsl,imx6q-sabrelite",
>  	NULL,
>  };
>  
> -- 
> 1.7.5.4




More information about the linux-arm-kernel mailing list