[PATCH 1/7] arm/imx6: add imx6q sabrelite board support
Richard Zhao
richard.zhao at linaro.org
Sun Dec 11 22:42:26 EST 2011
Signed-off-by: Richard Zhao <richard.zhao at linaro.org>
---
arch/arm/boot/dts/imx6q-sabrelite.dts | 54 +++++++++++++++++++++++++++++++++
arch/arm/mach-imx/mach-imx6q.c | 1 +
2 files changed, 55 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6q-sabrelite.dts
diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
new file mode 100644
index 0000000..d54363f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -0,0 +1,54 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx6q.dtsi"
+
+/ {
+ model = "Freescale i.MX6 Quad SABRE Lite Board";
+ compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
+
+ chosen {
+ bootargs = "console=ttymxc1,115200";
+ };
+
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+
+ soc {
+ aips-bus at 02100000 { /* AIPS2 */
+ enet at 02188000 {
+ phy-mode = "rgmii";
+ local-mac-address = [01 04 9F 01 1B 61];
+ phy-reset-gpios = <&gpio2 23 0>; /* gpio3 23 */
+ status = "okay";
+ };
+
+ usdhc at 02198000 { /* uSDHC3 */
+ cd-gpios = <&gpio6 0 0>; /* GPIO7_0 */
+ wp-gpios = <&gpio6 1 0>; /* GPIO7_1 */
+ status = "okay";
+ };
+
+ usdhc at 0219c000 { /* uSDHC4 */
+ cd-gpios = <&gpio1 6 0>; /* GPIO2_6 */
+ wp-gpios = <&gpio1 7 0>; /* GPIO2_7 */
+ status = "okay";
+ };
+
+ uart1: uart at 021e8000 { /* UART2 */
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 8deb012..d24d6c4 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -73,6 +73,7 @@ static struct sys_timer imx6q_timer = {
static const char *imx6q_dt_compat[] __initdata = {
"fsl,imx6q-sabreauto",
+ "fsl,imx6q-sabrelite",
NULL,
};
--
1.7.5.4
More information about the linux-arm-kernel
mailing list