[PATCH 15/19] mx3_defconfig: update default configuration

[Eric Bénard]

- add new machine VPR200
- update CPUIMX35 -> CPUIMX35SD
- add drivers :
	- DNET & SMSC911X
	- EVDEV & TOUCHSCREEN & TSC2007
	- LCD & BACKLIGHT support
	- SPI & SPIdev support
	- LEDS support
	- PCF8563 RTC support

Signed-off-by: Eric Bénard <eric at eukrea.com>
Cc: Sascha Hauer <kernel at pengutronix.de>
---
 arch/arm/configs/mx3_defconfig |   31 ++++++++++++++++++++++++-------
 1 files changed, 24 insertions(+), 7 deletions(-)

diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig
index cb0717f..afb6b04 100644
--- a/arch/arm/configs/mx3_defconfig
+++ b/arch/arm/configs/mx3_defconfig
@@ -23,7 +23,8 @@ CONFIG_MACH_ARMADILLO5X0=y
 CONFIG_MACH_KZM_ARM11_01=y
 CONFIG_MACH_PCM043=y
 CONFIG_MACH_MX35_3DS=y
-CONFIG_MACH_EUKREA_CPUIMX35=y
+CONFIG_MACH_EUKREA_CPUIMX35SD=y
+CONFIG_MACH_VPR200=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MXC_PWM=y
 CONFIG_ARM_ERRATA_411920=y
@@ -63,18 +64,17 @@ CONFIG_MTD_UBI=y
 CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_AT24=y
 CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
 CONFIG_DNET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+CONFIG_SMSC911X=y
+CONFIG_SMSC_PHY=y
 # CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
 CONFIG_KEYBOARD_IMX=y
 # CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_TSC2007=y
 # CONFIG_SERIO is not set
-# CONFIG_VT is not set
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=m
 CONFIG_SERIAL_8250_EXTENDED=y
@@ -86,6 +86,9 @@ CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_IMX=y
 CONFIG_SPI=y
+CONFIG_SPI_IMX=y
+CONFIG_SPI_SPIDEV=y
+CONFIG_GPIO_SYSFS=y
 CONFIG_W1=y
 CONFIG_W1_MASTER_MXC=y
 CONFIG_W1_SLAVE_THERM=y
@@ -109,6 +112,10 @@ CONFIG_SOC_CAMERA_OV772X=y
 CONFIG_VIDEO_MX3=y
 # CONFIG_RADIO_ADAPTERS is not set
 CONFIG_FB=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_PLATFORM=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_SOUND=y
 CONFIG_SND=y
 # CONFIG_SND_ARM is not set
@@ -127,7 +134,17 @@ CONFIG_USB_G_SERIAL=m
 CONFIG_USB_ULPI=y
 CONFIG_MMC=y
 CONFIG_MMC_MXC=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_PCF8563=y
 CONFIG_RTC_MXC=y
 CONFIG_DMADEVICES=y
 # CONFIG_DNOTIFY is not set
-- 
1.7.6.4