[PATCH V2 2/7] arm/imx6: add imx6q sabrelite board support

[Richard Zhao]

- Add basic board dts file
- Add board compatible string to mach-imx6q.

Signed-off-by: Richard Zhao <richard.zhao at linaro.org>
---
 arch/arm/boot/dts/imx6q-sabrelite.dts |   55 +++++++++++++++++++++++++++++++++
 arch/arm/mach-imx/mach-imx6q.c        |    1 +
 2 files changed, 56 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/boot/dts/imx6q-sabrelite.dts

diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
new file mode 100644
index 0000000..381f030
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx6q.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad SABRE Lite Board";
+	compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
+
+	cpus {
+		cpu at 0 {
+			clock-frequency = <996000000>;
+		};
+	};
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	soc {
+		aips-bus at 02100000 { /* AIPS2 */
+			enet at 02188000 {
+				phy-mode = "rgmii";
+				phy-reset-gpios = <&gpio3 23 0>;
+				status = "okay";
+			};
+
+			usdhc at 02198000 { /* uSDHC3 */
+				cd-gpios = <&gpio7 0 0>;
+				wp-gpios = <&gpio7 1 0>;
+				status = "okay";
+			};
+
+			usdhc at 0219c000 { /* uSDHC4 */
+				cd-gpios = <&gpio2 6 0>;
+				wp-gpios = <&gpio2 7 0>;
+				status = "okay";
+			};
+
+			uart1: uart at 021e8000 { /* UART2 */
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 8deb012..d24d6c4 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -73,6 +73,7 @@ static struct sys_timer imx6q_timer = {
 
 static const char *imx6q_dt_compat[] __initdata = {
 	"fsl,imx6q-sabreauto",
+	"fsl,imx6q-sabrelite",
 	NULL,
 };
 
-- 
1.7.5.4