[PATCH 18/19] mbimx51sd: add audio codec support

[Eric Bénard]

Signed-off-by: Eric Bénard <eric at eukrea.com>
Cc: Sascha Hauer <kernel at pengutronix.de>
---
 arch/arm/mach-mx5/Kconfig                    |    1 +
 arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c |   28 ++++++++++++++++++++++++++
 2 files changed, 29 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index f318b67..ab700bb 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -115,6 +115,7 @@ choice
 config MACH_EUKREA_MBIMXSD51_BASEBOARD
 	prompt "Eukrea MBIMXSD development board"
 	bool
+	select IMX_HAVE_PLATFORM_IMX_SSI
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select LEDS_GPIO_REGISTER
 	help
diff --git a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
index d817fc8..19acca1 100644
--- a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
@@ -67,6 +67,11 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
 	NEW_PAD_CTRL(MX51_PAD_GPIO1_0__SD1_CD, PAD_CTL_PUS_22K_UP |
 			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
 			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
+	/* SSI */
+	MX51_PAD_AUD3_BB_TXD__AUD3_TXD,
+	MX51_PAD_AUD3_BB_RXD__AUD3_RXD,
+	MX51_PAD_AUD3_BB_CK__AUD3_TXC,
+	MX51_PAD_AUD3_BB_FS__AUD3_TXFS,
 };
 
 #define GPIO_LED1	IMX_GPIO_NR(3, 30)
@@ -113,6 +118,11 @@ static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
 	},
 };
 
+static const
+struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = {
+	.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
+};
+
 /*
  * system init for baseboard usage. Will be called by cpuimx51sd init.
  *
@@ -125,11 +135,29 @@ void __init eukrea_mbimxsd51_baseboard_init(void)
 			ARRAY_SIZE(eukrea_mbimxsd_pads)))
 		printk(KERN_ERR "error setting mbimxsd pads !\n");
 
+#if defined(CONFIG_SND_SOC_EUKREA_TLV320)
+	/* SSI unit master I2S codec connected to SSI_AUD3 */
+	mxc_audmux_v2_configure_port(0,
+			MXC_AUDMUX_V2_PTCR_SYN |
+			MXC_AUDMUX_V2_PTCR_TFSDIR |
+			MXC_AUDMUX_V2_PTCR_TFSEL(2) |
+			MXC_AUDMUX_V2_PTCR_TCLKDIR |
+			MXC_AUDMUX_V2_PTCR_TCSEL(2),
+			MXC_AUDMUX_V2_PDCR_RXDSEL(2)
+	);
+	mxc_audmux_v2_configure_port(2,
+			MXC_AUDMUX_V2_PTCR_SYN |
+			MXC_AUDMUX_V2_PTCR_TCSEL(0),
+			MXC_AUDMUX_V2_PDCR_RXDSEL(0)
+	);
+#endif
 	imx51_add_imx_uart(1, NULL);
 	imx51_add_imx_uart(2, &uart_pdata);
 
 	imx51_add_sdhci_esdhc_imx(0, NULL);
 
+	imx51_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
+
 	gpio_request(GPIO_LED1, "LED1");
 	gpio_direction_output(GPIO_LED1, 1);
 	gpio_free(GPIO_LED1);
-- 
1.7.6.4