[PATCH v9 16/31] gpio/omap: use pm-runtime framework
Tarun Kanti DebBarma
tarun.kanti at ti.com
Tue Dec 13 15:20:18 EST 2011
Call runtime pm APIs pm_runtime_get_sync() and pm_runtime_put()
for enabling/disabling clocks appropriately. Remove syscore_ops and
instead use SET_RUNTIME_PM_OPS macro.
There is no more need to call omap_device_disable_idle_on_suspend
since driver is PM runtime adapted now.
Signed-off-by: Charulatha V <charu at ti.com>
Signed-off-by: Tarun Kanti DebBarma <tarun.kanti at ti.com>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar at ti.com>
---
arch/arm/mach-omap2/gpio.c | 2 -
drivers/gpio/gpio-omap.c | 66 ++++++++++++++++++++++++++++---------------
2 files changed, 43 insertions(+), 25 deletions(-)
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index dfda6b3..1e0b750 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -136,8 +136,6 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
return PTR_ERR(pdev);
}
- omap_device_disable_idle_on_suspend(pdev);
-
return 0;
}
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 0842495..e5dd3bb 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -21,6 +21,7 @@
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/pm_runtime.h>
+#include <linux/pm.h>
#include <mach/hardware.h>
#include <asm/irq.h>
@@ -80,6 +81,8 @@ struct gpio_bank {
struct omap_gpio_reg_offs *regs;
};
+static void omap_gpio_mod_init(struct gpio_bank *bank);
+
#define GPIO_INDEX(bank, gpio) (gpio % bank->width)
#define GPIO_BIT(bank, gpio) (1 << GPIO_INDEX(bank, gpio))
#define GPIO_MOD_CTRL_BIT BIT(0)
@@ -484,8 +487,14 @@ static int omap_gpio_request(struct gpio_chip *chip, unsigned offset)
struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip);
unsigned long flags;
- spin_lock_irqsave(&bank->lock, flags);
+ /*
+ * If this is the first gpio_request for the bank,
+ * enable the bank module.
+ */
+ if (!bank->mod_usage)
+ pm_runtime_get_sync(bank->dev);
+ spin_lock_irqsave(&bank->lock, flags);
/* Set trigger to none. You need to enable the desired trigger with
* request_irq() or set_irq_type().
*/
@@ -541,6 +550,13 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
_reset_gpio(bank, bank->chip.base + offset);
spin_unlock_irqrestore(&bank->lock, flags);
+
+ /*
+ * If this is the last gpio to be freed in the bank,
+ * disable the bank module.
+ */
+ if (!bank->mod_usage)
+ pm_runtime_put(bank->dev);
}
/*
@@ -566,6 +582,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
bank = irq_get_handler_data(irq);
isr_reg = bank->base + bank->regs->irqstatus;
+ pm_runtime_get_sync(bank->dev);
if (WARN_ON(!isr_reg))
goto exit;
@@ -626,6 +643,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
exit:
if (!unmasked)
chained_irq_exit(chip, desc);
+ pm_runtime_put(bank->dev);
}
static void gpio_irq_shutdown(struct irq_data *d)
@@ -1038,6 +1056,7 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev)
}
pm_runtime_enable(bank->dev);
+ pm_runtime_irq_safe(bank->dev);
pm_runtime_get_sync(bank->dev);
if (bank->is_mpuio)
@@ -1047,6 +1066,8 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev)
omap_gpio_chip_init(bank);
omap_gpio_show_rev(bank);
+ pm_runtime_put(bank->dev);
+
list_add_tail(&bank->node, &omap_gpio_list);
return ret;
@@ -1057,7 +1078,9 @@ err_exit:
return ret;
}
-static int omap_gpio_suspend(void)
+#ifdef CONFIG_ARCH_OMAP2PLUS
+
+static int omap_gpio_suspend(struct device *dev)
{
struct gpio_bank *bank;
@@ -1081,7 +1104,7 @@ static int omap_gpio_suspend(void)
return 0;
}
-static void omap_gpio_resume(void)
+static int omap_gpio_resume(struct device *dev)
{
struct gpio_bank *bank;
@@ -1090,21 +1113,17 @@ static void omap_gpio_resume(void)
unsigned long flags;
if (!bank->regs->wkup_en)
- return;
+ return 0;
spin_lock_irqsave(&bank->lock, flags);
_gpio_rmw(base, bank->regs->wkup_en, 0xffffffff, 0);
_gpio_rmw(base, bank->regs->wkup_en, bank->saved_wakeup, 1);
spin_unlock_irqrestore(&bank->lock, flags);
}
-}
-static struct syscore_ops omap_gpio_syscore_ops = {
- .suspend = omap_gpio_suspend,
- .resume = omap_gpio_resume,
-};
+ return 0;
+}
-#ifdef CONFIG_ARCH_OMAP2PLUS
static void omap_gpio_save_context(struct gpio_bank *bank);
static void omap_gpio_restore_context(struct gpio_bank *bank);
@@ -1148,11 +1167,15 @@ void omap2_gpio_prepare_for_idle(int off_mode)
bank->need_context_restore = true;
save_gpio_context:
+
if (bank->get_context_loss_count)
bank->context_loss_count =
bank->get_context_loss_count(bank->dev);
omap_gpio_save_context(bank);
+
+ if (!pm_runtime_suspended(bank->dev))
+ pm_runtime_put(bank->dev);
}
}
@@ -1175,6 +1198,8 @@ void omap2_gpio_resume_after_idle(void)
continue;
bank->need_context_restore = false;
+ if (pm_runtime_suspended(bank->dev))
+ pm_runtime_get_sync(bank->dev);
if (bank->get_context_loss_count) {
context_lost_cnt_after =
@@ -1282,12 +1307,20 @@ static void omap_gpio_restore_context(struct gpio_bank *bank)
bank->base + bank->regs->fallingdetect);
__raw_writel(bank->context.dataout, bank->base + bank->regs->dataout);
}
+#else
+#define omap_gpio_suspend NULL
+#define omap_gpio_resume NULL
#endif
+static const struct dev_pm_ops gpio_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(omap_gpio_suspend, omap_gpio_resume)
+};
+
static struct platform_driver omap_gpio_driver = {
.probe = omap_gpio_probe,
.driver = {
.name = "omap_gpio",
+ .pm = &gpio_pm_ops,
},
};
@@ -1301,16 +1334,3 @@ static int __init omap_gpio_drv_reg(void)
return platform_driver_register(&omap_gpio_driver);
}
postcore_initcall(omap_gpio_drv_reg);
-
-static int __init omap_gpio_sysinit(void)
-{
-
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
- if (cpu_is_omap16xx() || cpu_class_is_omap2())
- register_syscore_ops(&omap_gpio_syscore_ops);
-#endif
-
- return 0;
-}
-
-arch_initcall(omap_gpio_sysinit);
--
1.7.0.4
More information about the linux-arm-kernel
mailing list