[PATCH v3] mfd: mc13xxx: add device tree probe support
Shawn Guo
shawn.guo at linaro.org
Tue Dec 6 10:04:43 EST 2011
It adds device tree probe support for mc13xxx mfd driver.
Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
Cc: Samuel Ortiz <sameo at linux.intel.com>
---
Changes since v2:
* Add some note on how driver matches regulator device and the node
in binding document
Since it's a small change, I only resend this patch (as v3) instead
of the whole series. Hope it's fine.
Regards,
Shawn
Documentation/devicetree/bindings/mfd/mc13xxx.txt | 53 ++++++++++
drivers/mfd/mc13xxx-core.c | 106 +++++++++++++++------
2 files changed, 128 insertions(+), 31 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/mc13xxx.txt
diff --git a/Documentation/devicetree/bindings/mfd/mc13xxx.txt b/Documentation/devicetree/bindings/mfd/mc13xxx.txt
new file mode 100644
index 0000000..4ed46a61
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mc13xxx.txt
@@ -0,0 +1,53 @@
+* Freescale MC13783/MC13892 Power Management Integrated Circuit (PMIC)
+
+Required properties:
+- compatible : Should be "fsl,mc13783" or "fsl,mc13892"
+
+Optional properties:
+- fsl,mc13xxx-uses-adc : Indicate the ADC is being used
+- fsl,mc13xxx-uses-codec : Indicate the Audio Codec is being used
+- fsl,mc13xxx-uses-rtc : Indicate the RTC is being used
+- fsl,mc13xxx-uses-touch : Indicate the touchscreen controller is being used
+
+Sub-nodes:
+- regulators : Contain the regulator nodes. The name of regulator node
+ is being used by mc13xxx regulator driver to find the correct relator
+ device.
+
+ The bindings details of individual regulator device can be found in:
+ Documentation/devicetree/bindings/regulator/regulator.txt
+
+Examples:
+
+ecspi at 70010000 { /* ECSPI1 */
+ fsl,spi-num-chipselects = <2>;
+ cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */
+ <&gpio3 25 0>; /* GPIO4_25 */
+ status = "okay";
+
+ pmic: mc13892 at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mc13892";
+ spi-max-frequency = <6000000>;
+ reg = <0>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <8>;
+
+ regulators {
+ sw1_reg: mc13892__sw1 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1375000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw2_reg: mc13892__sw2 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
diff --git a/drivers/mfd/mc13xxx-core.c b/drivers/mfd/mc13xxx-core.c
index e9619ac..51b2dcc 100644
--- a/drivers/mfd/mc13xxx-core.c
+++ b/drivers/mfd/mc13xxx-core.c
@@ -18,11 +18,15 @@
#include <linux/spi/spi.h>
#include <linux/mfd/core.h>
#include <linux/mfd/mc13xxx.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
struct mc13xxx {
struct spi_device *spidev;
struct mutex lock;
int irq;
+ int flags;
irq_handler_t irqhandler[MC13XXX_NUM_IRQ];
void *irqdata[MC13XXX_NUM_IRQ];
@@ -550,10 +554,7 @@ static const char *mc13xxx_get_chipname(struct mc13xxx *mc13xxx)
int mc13xxx_get_flags(struct mc13xxx *mc13xxx)
{
- struct mc13xxx_platform_data *pdata =
- dev_get_platdata(&mc13xxx->spidev->dev);
-
- return pdata->flags;
+ return mc13xxx->flags;
}
EXPORT_SYMBOL(mc13xxx_get_flags);
@@ -696,17 +697,67 @@ static int mc13xxx_add_subdevice(struct mc13xxx *mc13xxx, const char *format)
return mc13xxx_add_subdevice_pdata(mc13xxx, format, NULL, 0);
}
+#ifdef CONFIG_OF
+static int mc13xxx_probe_flags_dt(struct mc13xxx *mc13xxx)
+{
+ struct device_node *np = mc13xxx->spidev->dev.of_node;
+
+ if (!np)
+ return -ENODEV;
+
+ if (of_get_property(np, "fsl,mc13xxx-uses-adc", NULL))
+ mc13xxx->flags |= MC13XXX_USE_ADC;
+
+ if (of_get_property(np, "fsl,mc13xxx-uses-codec", NULL))
+ mc13xxx->flags |= MC13XXX_USE_CODEC;
+
+ if (of_get_property(np, "fsl,mc13xxx-uses-rtc", NULL))
+ mc13xxx->flags |= MC13XXX_USE_RTC;
+
+ if (of_get_property(np, "fsl,mc13xxx-uses-touch", NULL))
+ mc13xxx->flags |= MC13XXX_USE_TOUCHSCREEN;
+
+ return 0;
+}
+#else
+static inline int mc13xxx_probe_flags_dt(struct mc13xxx *mc13xxx)
+{
+ return -ENODEV;
+}
+#endif
+
+static const struct spi_device_id mc13xxx_device_id[] = {
+ {
+ .name = "mc13783",
+ .driver_data = MC13XXX_ID_MC13783,
+ }, {
+ .name = "mc13892",
+ .driver_data = MC13XXX_ID_MC13892,
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(spi, mc13xxx_device_id);
+
+static const struct of_device_id mc13xxx_dt_ids[] = {
+ { .compatible = "fsl,mc13783", .data = (void *) MC13XXX_ID_MC13783, },
+ { .compatible = "fsl,mc13892", .data = (void *) MC13XXX_ID_MC13892, },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mc13xxx_dt_ids);
+
static int mc13xxx_probe(struct spi_device *spi)
{
+ const struct of_device_id *of_id;
+ struct spi_driver *sdrv = to_spi_driver(spi->dev.driver);
struct mc13xxx *mc13xxx;
struct mc13xxx_platform_data *pdata = dev_get_platdata(&spi->dev);
enum mc13xxx_id id;
int ret;
- if (!pdata) {
- dev_err(&spi->dev, "invalid platform data\n");
- return -EINVAL;
- }
+ of_id = of_match_device(mc13xxx_dt_ids, &spi->dev);
+ if (of_id)
+ sdrv->id_table = &mc13xxx_device_id[(enum mc13xxx_id) of_id->data];
mc13xxx = kzalloc(sizeof(*mc13xxx), GFP_KERNEL);
if (!mc13xxx)
@@ -749,28 +800,33 @@ err_revision:
mc13xxx_unlock(mc13xxx);
- if (pdata->flags & MC13XXX_USE_ADC)
+ if (mc13xxx_probe_flags_dt(mc13xxx) < 0 && pdata)
+ mc13xxx->flags = pdata->flags;
+
+ if (mc13xxx->flags & MC13XXX_USE_ADC)
mc13xxx_add_subdevice(mc13xxx, "%s-adc");
- if (pdata->flags & MC13XXX_USE_CODEC)
+ if (mc13xxx->flags & MC13XXX_USE_CODEC)
mc13xxx_add_subdevice(mc13xxx, "%s-codec");
- mc13xxx_add_subdevice_pdata(mc13xxx, "%s-regulator",
- &pdata->regulators, sizeof(pdata->regulators));
-
- if (pdata->flags & MC13XXX_USE_RTC)
+ if (mc13xxx->flags & MC13XXX_USE_RTC)
mc13xxx_add_subdevice(mc13xxx, "%s-rtc");
- if (pdata->flags & MC13XXX_USE_TOUCHSCREEN)
+ if (mc13xxx->flags & MC13XXX_USE_TOUCHSCREEN)
mc13xxx_add_subdevice(mc13xxx, "%s-ts");
- if (pdata->leds)
+ if (pdata) {
+ mc13xxx_add_subdevice_pdata(mc13xxx, "%s-regulator",
+ &pdata->regulators, sizeof(pdata->regulators));
mc13xxx_add_subdevice_pdata(mc13xxx, "%s-led",
pdata->leds, sizeof(*pdata->leds));
-
- if (pdata->buttons)
mc13xxx_add_subdevice_pdata(mc13xxx, "%s-pwrbutton",
pdata->buttons, sizeof(*pdata->buttons));
+ } else {
+ mc13xxx_add_subdevice(mc13xxx, "%s-regulator");
+ mc13xxx_add_subdevice(mc13xxx, "%s-led");
+ mc13xxx_add_subdevice(mc13xxx, "%s-pwrbutton");
+ }
return 0;
}
@@ -788,25 +844,13 @@ static int __devexit mc13xxx_remove(struct spi_device *spi)
return 0;
}
-static const struct spi_device_id mc13xxx_device_id[] = {
- {
- .name = "mc13783",
- .driver_data = MC13XXX_ID_MC13783,
- }, {
- .name = "mc13892",
- .driver_data = MC13XXX_ID_MC13892,
- }, {
- /* sentinel */
- }
-};
-MODULE_DEVICE_TABLE(spi, mc13xxx_device_id);
-
static struct spi_driver mc13xxx_driver = {
.id_table = mc13xxx_device_id,
.driver = {
.name = "mc13xxx",
.bus = &spi_bus_type,
.owner = THIS_MODULE,
+ .of_match_table = mc13xxx_dt_ids,
},
.probe = mc13xxx_probe,
.remove = __devexit_p(mc13xxx_remove),
--
1.7.4.1
More information about the linux-arm-kernel
mailing list