[PATCH 09/19] clock-imx35: fix reboot in internal boot modeg

[Eric Bénard]

Le 13/12/2011 11:00, Sascha Hauer a écrit :
> On Tue, Dec 13, 2011 at 07:31:41AM +0100, Eric Bénard wrote:
>> commit 8d75a2620dc3e33ce504044c375c443ed7ed4128 disable IIM
>> clock after reading silicon revision which will prevent
>> reboot in internal boot mode (see comment a few line before)
>
> I'm a bit unsure. The fix you suggest is the least intrusive, but
> a proper fix would be to move the mentioned block below the
> imx_print_silicon_rev, like this:
>
> 	clk_enable(&iim_clk);
> 	imx_print_silicon_rev("i.MX35", mx35_revision());
> 	clk_disable(&iim_clk);
>
> 	/*
> 	 * Check if we came up in internal boot mode. If yes, we need
> 	 * some
> 	 * extra clocks turned on, otherwise the MX35 boot ROM code will
> 	 * hang after a watchdog reset.
> 	 */
> 	if (!(__raw_readl(CCM_BASE + CCM_RCSR)&  (3<<  10))) {
> 		clk_enable(&iim_clk);
> 		clk_enable(&uart1_clk);
> 		clk_enable(&scc_clk);
> 	}
>
> This would also get the clk enable counters right.
>
OK that's cleaner.
While fixing the patch it seems comment & code are not synced as scc_clk is 
0x3 << 2 and the code was setting 0x3 << 4 which corresponds to sdma_clk (and 
in my configuration, reboot works without any of these clocks forced). I chose 
to have code synced with comment for v2 of the patch.

Eric