[PATCH] ARM: S3C64XX: Remove unconditional power domain disables

[Mark Brown]

Now that we have software runtime power management support this code is
redundant.

Signed-off-by: Mark Brown <broonie at opensource.wolfsonmicro.com>
---
 arch/arm/mach-s3c64xx/pm.c |   13 -------------
 1 files changed, 0 insertions(+), 13 deletions(-)

diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index 055dac9..7d3e81b 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -346,23 +346,10 @@ int __init s3c64xx_pm_init(void)
 
 static __init int s3c64xx_pm_initcall(void)
 {
-	u32 val;
-
 	pm_cpu_prep = s3c64xx_pm_prepare;
 	pm_cpu_sleep = s3c64xx_cpu_suspend;
 	pm_uart_udivslot = 1;
 
-	/*
-	 * Unconditionally disable power domains that contain only
-	 * blocks which have no mainline driver support.
-	 */
-	val = __raw_readl(S3C64XX_NORMAL_CFG);
-	val &= ~(S3C64XX_NORMALCFG_DOMAIN_G_ON |
-		 S3C64XX_NORMALCFG_DOMAIN_V_ON |
-		 S3C64XX_NORMALCFG_DOMAIN_I_ON |
-		 S3C64XX_NORMALCFG_DOMAIN_P_ON);
-	__raw_writel(val, S3C64XX_NORMAL_CFG);
-
 #ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
 	gpio_request(S3C64XX_GPN(12), "DEBUG_LED0");
 	gpio_request(S3C64XX_GPN(13), "DEBUG_LED1");
-- 
1.7.7.3