[PATCH] [RFC] pinctrl: add a driver for Energy Micro's efm32 SoCs

[Uwe Kleine-König]

On Mon, Dec 12, 2011 at 03:37:50PM +0100, Sascha Hauer wrote:
> On Sat, Dec 10, 2011 at 01:18:43AM +0100, Linus Walleij wrote:
> > On Fri, Dec 9, 2011 at 12:08 PM, Sascha Hauer <s.hauer at pengutronix.de> wrote:
> > 
> > > I still think it should be "I'm board Y, please set all my pins up for me"
> > 
> > This is basically what the current pinmux hog concept does.
> > 
> > > Drivers should not be bothered with pin muxing *at all*.
> > 
> > Not if they are simple. Like - set them up once and for all and
> > then forget about it.
> > 
> > It gets problematic when we get to sleep states and the system
> > need to reconfigure all pins on say idle or deep sleep.
> 
> If you need to reconfigure your pins in deep sleep and you control
> the pins in the driver this seems to suggest that your device won't
> suspend properly if the driver is not loaded?
If the pins have to be inactive (for some definition of inactive) for
sleep it should work well without the driver loaded, shouldn't it?

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |