[PATCH-V5 3/3] arm:omap:am33xx: Add low level debugging support

[hvaibhav at ti.com]

From: Afzal Mohammed <afzal at ti.com>

Add support for low level debugging on AM335X EVM (AM33XX family).
Currently only support for UART1 console, which is used on AM335X EVM
is added.

Signed-off-by: Afzal Mohammed <afzal at ti.com>
Signed-off-by: Vaibhav Hiremath <hvaibhav at ti.com>
Reviewed-by: Kevin Hilman <khilman at ti.com>
---
 arch/arm/mach-omap2/include/mach/debug-macro.S |   17 ++++++++++++++++-
 arch/arm/plat-omap/include/plat/serial.h       |    4 ++++
 arch/arm/plat-omap/include/plat/uncompress.h   |    6 ++++++
 3 files changed, 26 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S
index 13f98e5..7da7126 100644
--- a/arch/arm/mach-omap2/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
@@ -72,6 +72,8 @@ omap_uart_lsr:	.word	0
 		beq	82f			@ configure UART2
 		cmp	\rp, #TI816XUART3	@ ti816x UART offsets different
 		beq	83f			@ configure UART3
+		cmp	\rp, #AM33XXUART1	@ AM33XX UART offsets different
+		beq	84f			@ configure UART1
 		cmp	\rp, #ZOOM_UART		@ only on zoom2/3
 		beq	95f			@ configure ZOOM_UART

@@ -100,7 +102,9 @@ omap_uart_lsr:	.word	0
 		b	98f
 83:		mov	\rp, #UART_OFFSET(TI816X_UART3_BASE)
 		b	98f
-
+84:		ldr	\rp, =AM33XX_UART1_BASE
+		and	\rp, \rp, #0x00ffffff
+		b	97f
 95:		ldr	\rp, =ZOOM_UART_BASE
 		str	\rp, [\tmp, #0]		@ omap_uart_phys
 		ldr	\rp, =ZOOM_UART_VIRT
@@ -109,6 +113,17 @@ omap_uart_lsr:	.word	0
 		str	\rp, [\tmp, #8]		@ omap_uart_lsr
 		b	10b

+		/* AM33XX: Store both phys and virt address for the uart */
+97:		add	\rp, \rp, #0x44000000	@ phys base
+		str	\rp, [\tmp, #0]		@ omap_uart_phys
+		sub	\rp, \rp, #0x44000000	@ phys base
+		add	\rp, \rp, #0xf9000000	@ virt base
+		str	\rp, [\tmp, #4]		@ omap_uart_virt
+		mov	\rp, #(UART_LSR << OMAP_PORT_SHIFT)
+		str	\rp, [\tmp, #8]		@ omap_uart_lsr
+
+		b	10b
+
 		/* Store both phys and virt address for the uart */
 98:		add	\rp, \rp, #0x48000000	@ phys base
 		str	\rp, [\tmp, #0]		@ omap_uart_phys
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index 1ab9fd6..e988c92 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -59,6 +59,9 @@
 /* AM3505/3517 UART4 */
 #define AM35XX_UART4_BASE	0x4809E000	/* Only on AM3505/3517 */

+/* AM33XX serial port */
+#define AM33XX_UART1_BASE	0x44E09000
+
 /* External port on Zoom2/3 */
 #define ZOOM_UART_BASE		0x10000000
 #define ZOOM_UART_VIRT		0xfa400000
@@ -92,6 +95,7 @@
 #define TI816XUART1		81
 #define TI816XUART2		82
 #define TI816XUART3		83
+#define AM33XXUART1		84
 #define ZOOM_UART		95		/* Only on zoom2/3 */

 /* This is only used by 8250.c for omap1510 */
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index 2d45ea3..ff59570 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -103,6 +103,10 @@ static inline void flush(void)
 	_DEBUG_LL_ENTRY(mach, TI816X_UART##p##_BASE, OMAP_PORT_SHIFT,	\
 		TI816XUART##p)

+#define DEBUG_LL_AM33XX(p, mach)					\
+	_DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT,	\
+		AM33XXUART##p)
+
 static inline void __arch_decomp_setup(unsigned long arch_id)
 {
 	int port = 0;
@@ -181,6 +185,8 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
 		/* TI8168 base boards using UART3 */
 		DEBUG_LL_TI816X(3, ti8168evm);

+		/* AM33XX base boards using UART1 */
+		DEBUG_LL_AM33XX(1, am335xevm);
 	} while (0);
 }

--
1.7.0.4