[PATCH] ARM: at91/net: add macb ethernet controller in 9g45 DT
Jean-Christophe PLAGNIOL-VILLARD
plagnioj at jcrosoft.com
Sat Dec 3 00:56:59 EST 2011
On 18:50 Fri 02 Dec , Nicolas Ferre wrote:
> Add the Cadence macb ethernet controller in at91sam9g45 .dtsi and
> enable it in at91sam9m10g45ek board device tree file.
>
> Signed-off-by: Nicolas Ferre <nicolas.ferre at atmel.com>
> ---
> arch/arm/boot/dts/at91sam9g45.dtsi | 7 +++++++
> arch/arm/boot/dts/at91sam9m10g45ek.dts | 6 ++++++
> 2 files changed, 13 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
> index e89b1d7..67f94d3 100644
> --- a/arch/arm/boot/dts/at91sam9g45.dtsi
> +++ b/arch/arm/boot/dts/at91sam9g45.dtsi
> @@ -101,6 +101,13 @@
> atmel,use-dma-tx;
> status = "disabled";
> };
> +
> + macb0: ethernet at fffbc000 {
> + compatible = "cdns,at32ap7000-macb", "cdns,macb";
> + reg = <0xfffbc000 0x100>;
> + interrupts = <25 4>;
why?
> + status = "disabled";
> + };
> };
> };
> };
> diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
> index 85b34f5..17377a2 100644
> --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
> +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
> @@ -30,6 +30,12 @@
> usart1: serial at fff90000 {
> status = "okay";
> };
> +
> + macb0: ethernet at fffbc000 {
> + local-mac-address = [3a 0e 03 04 05 06];
please drop this is not supposed to be in the dts but updated for each board
Best Regards,
J.
More information about the linux-arm-kernel
mailing list