[PATCH] ARM: S3C64XX: Fix interrupt configuration for PCA935x on Cragganmore

[Kukjin Kim]

Mark Brown wrote:
> 
> 0 is a valid IRQ but the interrupt line for the pca935x certainly isn't
> connected there which causes it to fail to probe.
> 
> Signed-off-by: Mark Brown <broonie at opensource.wolfsonmicro.com>
> ---
>  arch/arm/mach-s3c64xx/mach-crag6410.c |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
> 
> diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-
> s3c64xx/mach-crag6410.c
> index 46dfb14..139d16e 100644
> --- a/arch/arm/mach-s3c64xx/mach-crag6410.c
> +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
> @@ -357,7 +357,7 @@ static struct platform_device *crag6410_devices[]
> __initdata = {
> 
>  static struct pca953x_platform_data crag6410_pca_data = {
>  	.gpio_base	= PCA935X_GPIO_BASE,
> -	.irq_base	= 0,
> +	.irq_base	= -1,
>  };
> 
>  /* VDDARM is controlled by DVS1 connected to GPK(0) */
> --
> 1.7.7.3

OK, so do you want to apply this before v3.2?

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.