[PATCH v2 3/7] ARM: OMAP1: ams-delta: supersede custom led device by leds-gpio
Janusz Krzysztofik
jkrzyszt at tis.icnet.pl
Mon Dec 19 18:08:53 EST 2011
Now that the Amstrad Delta on-board latches have been converted to GPIO
devices, use the generic driver to control on-board LEDs which hang off
those latches.
Depends on patch 2/7 "ARM: OMAP1: ams-delta: convert latches to
basic_mmio_gpio"
Signed-off-by: Janusz Krzysztofik <jkrzyszt at tis.icnet.pl>
---
Changes against initial version:
* no functional changes,
* refreshed on top of v2 of patch 2/7,
* dropped leading underscores from local symbols, variable and function
names (no namespace conflicts expected).
arch/arm/mach-omap1/Kconfig | 1 +
arch/arm/mach-omap1/board-ams-delta.c | 87 +++++++++++---------
arch/arm/plat-omap/include/plat/board-ams-delta.h | 19 -----
3 files changed, 49 insertions(+), 58 deletions(-)
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index d2606b1..ed7e864 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -156,6 +156,7 @@ config MACH_AMS_DELTA
depends on ARCH_OMAP1 && ARCH_OMAP15XX
select FIQ
select GPIO_GENERIC_PLATFORM
+ select LEDS_GPIO_REGISTER
help
Support for the Amstrad E3 (codename Delta) videophone. Say Y here
if you have such a device.
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index cff2711..034d009 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -164,18 +164,21 @@ static struct omap_board_config_kernel ams_delta_config[] __initdata = {
{ OMAP_TAG_LCD, &ams_delta_lcd_config },
};
+#define LATCH1_GPIO_BASE 232
+#define LATCH1_NGPIO 8
+
static struct resource latch1_resources[] __initconst = {
[0] = {
.name = "dat",
.start = LATCH1_PHYS,
- .end = LATCH1_PHYS + (AMS_DELTA_LATCH1_NGPIO - 1) / 8,
+ .end = LATCH1_PHYS + (LATCH1_NGPIO - 1) / 8,
.flags = IORESOURCE_MEM,
},
};
static struct bgpio_pdata latch1_pdata __initconst = {
- .base = AMS_DELTA_LATCH1_GPIO_BASE,
- .ngpio = AMS_DELTA_LATCH1_NGPIO,
+ .base = LATCH1_GPIO_BASE,
+ .ngpio = LATCH1_NGPIO,
};
static struct platform_device latch1_gpio_device = {
@@ -214,42 +217,12 @@ static struct platform_device latch2_gpio_device = {
static struct gpio latch_gpios[] __initconst = {
{
- .gpio = AMS_DELTA_GPIO_PIN_LED_CAMERA,
- .flags = GPIOF_OUT_INIT_LOW,
- .label = "led_camera",
- },
- {
- .gpio = AMS_DELTA_GPIO_PIN_LED_ADVERT,
- .flags = GPIOF_OUT_INIT_LOW,
- .label = "led_advert",
- },
- {
- .gpio = AMS_DELTA_GPIO_PIN_LED_EMAIL,
- .flags = GPIOF_OUT_INIT_LOW,
- .label = "led_email",
- },
- {
- .gpio = AMS_DELTA_GPIO_PIN_LED_HANDSFREE,
- .flags = GPIOF_OUT_INIT_LOW,
- .label = "led_handsfree",
- },
- {
- .gpio = AMS_DELTA_GPIO_PIN_LED_VOICEMAIL,
- .flags = GPIOF_OUT_INIT_LOW,
- .label = "led_voicemail",
- },
- {
- .gpio = AMS_DELTA_GPIO_PIN_LED_VOICE,
- .flags = GPIOF_OUT_INIT_LOW,
- .label = "led_voice",
- },
- {
- .gpio = AMS_DELTA_LATCH1_GPIO_BASE + 6,
+ .gpio = LATCH1_GPIO_BASE + 6,
.flags = GPIOF_OUT_INIT_LOW,
.label = "dockit1",
},
{
- .gpio = AMS_DELTA_LATCH1_GPIO_BASE + 7,
+ .gpio = LATCH1_GPIO_BASE + 7,
.flags = GPIOF_OUT_INIT_LOW,
.label = "dockit2",
},
@@ -399,9 +372,45 @@ static struct platform_device ams_delta_lcd_device = {
.id = -1,
};
-static struct platform_device ams_delta_led_device = {
- .name = "ams-delta-led",
- .id = -1
+static struct gpio_led gpio_leds[] __initconst = {
+ {
+ .name = "camera",
+ .gpio = LATCH1_GPIO_BASE + 0,
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+#ifdef CONFIG_LEDS_TRIGGERS
+ .default_trigger = "ams_delta_camera",
+#endif
+ },
+ {
+ .name = "advert",
+ .gpio = LATCH1_GPIO_BASE + 1,
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ },
+ {
+ .name = "email",
+ .gpio = LATCH1_GPIO_BASE + 2,
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ },
+ {
+ .name = "handsfree",
+ .gpio = LATCH1_GPIO_BASE + 3,
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ },
+ {
+ .name = "voicemail",
+ .gpio = LATCH1_GPIO_BASE + 4,
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ },
+ {
+ .name = "voice",
+ .gpio = LATCH1_GPIO_BASE + 5,
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ },
+};
+
+static struct gpio_led_platform_data leds_pdata __initconst = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
};
static struct i2c_board_info ams_delta_camera_board_info[] = {
@@ -459,7 +468,6 @@ static struct platform_device *ams_delta_devices[] __initdata = {
static struct platform_device *late_devices[] __initconst = {
&ams_delta_nand_device,
&ams_delta_lcd_device,
- &ams_delta_led_device,
};
static void __init ams_delta_init(void)
@@ -493,6 +501,7 @@ static void __init ams_delta_init(void)
led_trigger_register_simple("ams_delta_camera",
&ams_delta_camera_led_trigger);
#endif
+ gpio_led_register_device(-1, &leds_pdata);
platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
ams_delta_init_fiq();
diff --git a/arch/arm/plat-omap/include/plat/board-ams-delta.h b/arch/arm/plat-omap/include/plat/board-ams-delta.h
index 68ffe32..a0f86ca 100644
--- a/arch/arm/plat-omap/include/plat/board-ams-delta.h
+++ b/arch/arm/plat-omap/include/plat/board-ams-delta.h
@@ -28,13 +28,6 @@
#if defined (CONFIG_MACH_AMS_DELTA)
-#define AMS_DELTA_LATCH1_LED_CAMERA 0x01
-#define AMS_DELTA_LATCH1_LED_ADVERT 0x02
-#define AMS_DELTA_LATCH1_LED_EMAIL 0x04
-#define AMS_DELTA_LATCH1_LED_HANDSFREE 0x08
-#define AMS_DELTA_LATCH1_LED_VOICEMAIL 0x10
-#define AMS_DELTA_LATCH1_LED_VOICE 0x20
-
#define AMS_DELTA_LATCH2_LCD_VBLEN 0x0001
#define AMS_DELTA_LATCH2_LCD_NDISP 0x0002
#define AMS_DELTA_LATCH2_NAND_NCE 0x0004
@@ -59,13 +52,6 @@
#define AMS_DELTA_GPIO_PIN_CONFIG 11
#define AMS_DELTA_GPIO_PIN_NAND_RB 12
-#define AMS_DELTA_GPIO_PIN_LED_CAMERA 232
-#define AMS_DELTA_GPIO_PIN_LED_ADVERT 233
-#define AMS_DELTA_GPIO_PIN_LED_EMAIL 234
-#define AMS_DELTA_GPIO_PIN_LED_HANDSFREE 235
-#define AMS_DELTA_GPIO_PIN_LED_VOICEMAIL 236
-#define AMS_DELTA_GPIO_PIN_LED_VOICE 237
-
#define AMS_DELTA_GPIO_PIN_LCD_VBLEN 240
#define AMS_DELTA_GPIO_PIN_LCD_NDISP 241
#define AMS_DELTA_GPIO_PIN_NAND_NCE 242
@@ -81,16 +67,11 @@
#define AMS_DELTA_GPIO_PIN_MODEM_NRESET 252
#define AMS_DELTA_GPIO_PIN_MODEM_CODEC 253
-#define AMS_DELTA_LATCH1_GPIO_BASE AMS_DELTA_GPIO_PIN_LED_CAMERA
-#define AMS_DELTA_LATCH1_NGPIO 8
#define AMS_DELTA_LATCH2_GPIO_BASE AMS_DELTA_GPIO_PIN_LCD_VBLEN
#define AMS_DELTA_LATCH2_NGPIO 16
#ifndef __ASSEMBLY__
void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value);
-#define ams_delta_latch1_write(mask, value) \
- ams_delta_latch_write(AMS_DELTA_LATCH1_GPIO_BASE, \
- AMS_DELTA_LATCH1_NGPIO, (mask), (value))
#define ams_delta_latch2_write(mask, value) \
ams_delta_latch_write(AMS_DELTA_LATCH2_GPIO_BASE, \
AMS_DELTA_LATCH2_NGPIO, (mask), (value))
--
1.7.3.4
More information about the linux-arm-kernel
mailing list