[PATCH 08/12] serial: mxs-auart: convert to clk_prepare/clk_unprepare

Uwe Kleine-König u.kleine-koenig at pengutronix.de
Tue Dec 20 09:07:50 EST 2011


Hello,

On Tue, Dec 20, 2011 at 02:49:13PM +0100, Marek Vasut wrote:
> > The patch converts mxs-auart driver to clk_prepare/clk_unprepare by
> > using helper functions clk_prepare_enable/clk_disable_unprepare.
> > 
> > Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
> > Cc: Sascha Hauer <s.hauer at pengutronix.de>
> > Cc: Alan Cox <alan at linux.intel.com>
> > ---
> >  drivers/tty/serial/mxs-auart.c |    8 ++++----
> >  1 files changed, 4 insertions(+), 4 deletions(-)
> > 
> > diff --git a/drivers/tty/serial/mxs-auart.c
> > b/drivers/tty/serial/mxs-auart.c index 7e02c9c..c33500a 100644
> > --- a/drivers/tty/serial/mxs-auart.c
> > +++ b/drivers/tty/serial/mxs-auart.c
> > @@ -424,7 +424,7 @@ static int mxs_auart_startup(struct uart_port *u)
> >  {
> >  	struct mxs_auart_port *s = to_auart_port(u);
> > 
> > -	clk_enable(s->clk);
> > +	clk_prepare_enable(s->clk);
> > 
> >  	writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_CLR);
> > 
> > @@ -453,7 +453,7 @@ static void mxs_auart_shutdown(struct uart_port *u)
> >  	writel(AUART_INTR_RXIEN | AUART_INTR_RTIEN | AUART_INTR_CTSMIEN,
> >  			u->membase + AUART_INTR_CLR);
> > 
> > -	clk_disable(s->clk);
> > +	clk_disable_unprepare(s->clk);
> >  }
> > 
> >  static unsigned int mxs_auart_tx_empty(struct uart_port *u)
> > @@ -634,7 +634,7 @@ auart_console_setup(struct console *co, char *options)
> >  	if (!s)
> >  		return -ENODEV;
> > 
> > -	clk_enable(s->clk);
> > +	clk_prepare_enable(s->clk);
> > 
> >  	if (options)
> >  		uart_parse_options(options, &baud, &parity, &bits, &flow);
> > @@ -643,7 +643,7 @@ auart_console_setup(struct console *co, char *options)
> > 
> >  	ret = uart_set_options(&s->port, co, baud, parity, bits, flow);
> > 
> > -	clk_disable(s->clk);
> > +	clk_disable_unprepare(s->clk);
> > 
> >  	return ret;
> >  }
> 
> DTTO here, are you sure all of them are not called from atomic ctx?
the startup callback is called with irqs off. AFAIK clk_prepare should
be called in request_port and console_setup.

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |



More information about the linux-arm-kernel mailing list