[PATCH 0/4] ARM: OMAP2+: Interrupt controllers adaptation to DT

[Benoit Cousson]

Hi Tony and Rob,

Here is the series to take advantage of the new DT interrupt init mechanism.
Thanks to Mark's CONFIG_MULTI_IRQ_HANDLER series, OMAP4 just has to
use the default GIC binding and does not need some OMAP specific hacks
anymore.
OMAP2 and 3 are using a simple interrupt controller that can thus expose
a simpler binding.

This series is based on rmk/devel-stable branch to get Mark's series +
a couple of OMAP fixes.

An extra fix is needed before for the board-generic.c file: 
[PATCH] ARM: OMAP2+: board-generic: Add missing handle_irq

The series with all the dependencies merged is available here for reference:
git://gitorious.org/omap-pm/linux.git for_3.3/2_dt_irq

Regards,
Benoit


Benoit Cousson (4):
  arm/dts: OMAP4: Update DTS file with new GIC bindings
  ARM: OMAP2/3: intc: Add DT support for TI interrupt controller
  arm/dts: OMAP3: Add interrupt-controller bindings for INTC
  ARM: OMAP2+: board-generic: Use of_irq_init API

 .../devicetree/bindings/arm/omap/intc.txt          |   27 +++++++++++++++
 arch/arm/boot/dts/omap3.dtsi                       |    6 ++-
 arch/arm/boot/dts/omap4.dtsi                       |    3 +-
 arch/arm/mach-omap2/board-generic.c                |   30 +++++++++--------
 arch/arm/mach-omap2/common.h                       |   10 ++++++
 arch/arm/mach-omap2/irq.c                          |   35 ++++++++++++++++++--
 6 files changed, 91 insertions(+), 20 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/omap/intc.txt