[PATCH v6 11/11] davinci: dm644x EVM: add support for VPBE display

[Manjunath Hadli]

This patch adds support for V4L2 video display to DM6446 EVM.
Support for SD and ED modes is provided, along with Composite
and Component outputs.Also added vpbe_config as a parameter for
dm644x_init_video to allow for registration of vpbe platform devices.

Signed-off-by: Manjunath Hadli <manjunath.hadli at ti.com>
Acked-by: Sekhar Nori <nsekhar at ti.com>
---
 arch/arm/mach-davinci/board-dm644x-evm.c |  108 +++++++++++++++++++++++++++++-
 1 files changed, 107 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index eb7daff..af81dbb 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -612,6 +612,112 @@ static void __init evm_init_i2c(void)
 	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
 }
 
+#define VENC_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
+
+/* venc standard timings */
+static struct vpbe_enc_mode_info dm644xevm_enc_std_timing[] = {
+	{
+		.name		= "ntsc",
+		.timings_type	= VPBE_ENC_STD,
+		.timings	= {V4L2_STD_525_60},
+		.interlaced	= 1,
+		.xres		= 720,
+		.yres		= 480,
+		.aspect		= {11, 10},
+		.fps		= {30000, 1001},
+		.left_margin	= 0x79,
+		.upper_margin	= 0x10,
+	},
+	{
+		.name		= "pal",
+		.timings_type	= VPBE_ENC_STD,
+		.timings	= {V4L2_STD_625_50},
+		.interlaced	= 1,
+		.xres		= 720,
+		.yres		= 576,
+		.aspect		= {54, 59},
+		.fps		= {25, 1},
+		.left_margin	= 0x7e,
+		.upper_margin	= 0x16,
+	},
+};
+
+/* venc dv preset timings */
+static struct vpbe_enc_mode_info dm644xevm_enc_preset_timing[] = {
+	{
+		.name		= "480p59_94",
+		.timings_type	= VPBE_ENC_DV_PRESET,
+		.timings	= {V4L2_DV_480P59_94},
+		.interlaced	= 0,
+		.xres		= 720,
+		.yres		= 480,
+		.aspect		= {1, 1},
+		.fps		= {5994, 100},
+		.left_margin	= 0x80,
+		.upper_margin	= 0x20,
+	},
+	{
+		.name		= "576p50",
+		.timings_type	= VPBE_ENC_DV_PRESET,
+		.timings	= {V4L2_DV_576P50},
+		.interlaced	= 0,
+		.xres		= 720,
+		.yres		= 576,
+		.aspect		= {1, 1},
+		.fps		= {50, 1},
+		.left_margin	= 0x7e,
+		.upper_margin	= 0x30,
+	},
+};
+
+/*
+ * The outputs available from VPBE + encoders. Keep the order same
+ * as that of encoders. First those from venc followed by that from
+ * encoders. Index in the output refers to index on a particular encoder.
+ * Driver uses this index to pass it to encoder when it supports more than
+ * one output. Application uses index of the array to set an output.
+ */
+static struct vpbe_output dm644xevm_vpbe_outputs[] = {
+	{
+		.output		= {
+			.index		= 0,
+			.name		= "Composite",
+			.type		= V4L2_OUTPUT_TYPE_ANALOG,
+			.std		= VENC_STD_ALL,
+			.capabilities	= V4L2_OUT_CAP_STD,
+		},
+		.subdev_name	= VPBE_VENC_SUBDEV_NAME,
+		.default_mode	= "ntsc",
+		.num_modes	= ARRAY_SIZE(dm644xevm_enc_std_timing),
+		.modes		= dm644xevm_enc_std_timing,
+	},
+	{
+		.output		= {
+			.index		= 1,
+			.name		= "Component",
+			.type		= V4L2_OUTPUT_TYPE_ANALOG,
+			.capabilities	= V4L2_OUT_CAP_PRESETS,
+		},
+		.subdev_name	= VPBE_VENC_SUBDEV_NAME,
+		.default_mode	= "480p59_94",
+		.num_modes	= ARRAY_SIZE(dm644xevm_enc_preset_timing),
+		.modes		= dm644xevm_enc_preset_timing,
+	},
+};
+
+static struct vpbe_config dm644xevm_display_cfg = {
+	.module_name	= "dm644x-vpbe-display",
+	.i2c_adapter_id	= 1,
+	.osd		= {
+		.module_name	= VPBE_OSD_SUBDEV_NAME,
+	},
+	.venc		= {
+		.module_name	= VPBE_VENC_SUBDEV_NAME,
+	},
+	.num_outputs	= ARRAY_SIZE(dm644xevm_vpbe_outputs),
+	.outputs	= dm644xevm_vpbe_outputs,
+};
+
 static struct platform_device *davinci_evm_devices[] __initdata = {
 	&davinci_fb_device,
 	&rtc_dev,
@@ -695,7 +801,7 @@ static __init void davinci_evm_init(void)
 	evm_init_i2c();
 
 	davinci_setup_mmc(0, &dm6446evm_mmc_config);
-	dm644x_init_video(&dm644xevm_capture_cfg, NULL);
+	dm644x_init_video(&dm644xevm_capture_cfg, &dm644xevm_display_cfg);
 
 	davinci_serial_init(&uart_config);
 	dm644x_init_asp(&dm644x_evm_snd_data);
-- 
1.6.2.4