[PATCH] ARM: OMAP: McSPI: Remove unused flag from struct omap2_mcspi_device_config
Jarkko Nikula
jarkko.nikula at bitmer.com
Mon Dec 12 04:15:17 EST 2011
Flag single_channel in struct omap2_mcspi_device_config is not used
by drivers/spi/spi-omap2-mcspi.c so we may remove it from include/plat/mcspi.h
and affected board files.
Signed-off-by: Jarkko Nikula <jarkko.nikula at bitmer.com>
---
arch/arm/mach-omap2/board-cm-t35.c | 1 -
arch/arm/mach-omap2/board-n8x0.c | 1 -
arch/arm/mach-omap2/board-rx51-peripherals.c | 3 ---
arch/arm/mach-omap2/board-zoom-display.c | 1 -
arch/arm/mach-omap2/common-board-devices.c | 1 -
arch/arm/plat-omap/include/plat/mcspi.h | 3 ---
6 files changed, 0 insertions(+), 10 deletions(-)
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index b38cd7b..4cc2f04 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -280,7 +280,6 @@ static struct omap_dss_board_info cm_t35_dss_data = {
static struct omap2_mcspi_device_config tdo24m_mcspi_config = {
.turbo_mode = 0,
- .single_channel = 1, /* 0: slave, 1: master */
};
static struct tdo24m_platform_data tdo24m_config = {
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 05107d8..74065e6 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -140,7 +140,6 @@ static void __init n8x0_usb_init(void) {}
static struct omap2_mcspi_device_config p54spi_mcspi_config = {
.turbo_mode = 0,
- .single_channel = 1,
};
static struct spi_board_info n800_spi_board_info[] __initdata = {
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index e9eff00..c01c175 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -138,17 +138,14 @@ static struct lp5523_platform_data rx51_lp5523_platform_data = {
static struct omap2_mcspi_device_config wl1251_mcspi_config = {
.turbo_mode = 0,
- .single_channel = 1,
};
static struct omap2_mcspi_device_config mipid_mcspi_config = {
.turbo_mode = 0,
- .single_channel = 1,
};
static struct omap2_mcspi_device_config tsc2005_mcspi_config = {
.turbo_mode = 0,
- .single_channel = 1,
};
static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c
index d4683ba..2818290 100644
--- a/arch/arm/mach-omap2/board-zoom-display.c
+++ b/arch/arm/mach-omap2/board-zoom-display.c
@@ -117,7 +117,6 @@ static struct omap_dss_board_info zoom_dss_data = {
static struct omap2_mcspi_device_config dss_lcd_mcspi_config = {
.turbo_mode = 1,
- .single_channel = 1, /* 0: slave, 1: master */
};
static struct spi_board_info nec_8048_spi_board_info[] __initdata = {
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index bcb0c58..2d1d775 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -33,7 +33,6 @@
defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
static struct omap2_mcspi_device_config ads7846_mcspi_config = {
.turbo_mode = 0,
- .single_channel = 1, /* 0: slave, 1: master */
};
static struct ads7846_platform_data ads7846_config = {
diff --git a/arch/arm/plat-omap/include/plat/mcspi.h b/arch/arm/plat-omap/include/plat/mcspi.h
index 3d51b18..a357eb2 100644
--- a/arch/arm/plat-omap/include/plat/mcspi.h
+++ b/arch/arm/plat-omap/include/plat/mcspi.h
@@ -18,9 +18,6 @@ struct omap2_mcspi_dev_attr {
struct omap2_mcspi_device_config {
unsigned turbo_mode:1;
-
- /* Do we want one channel enabled at the same time? */
- unsigned single_channel:1;
};
#endif
--
1.7.7.3
More information about the linux-arm-kernel
mailing list