[PATCH 1/2] ARM: at91: make x40s use free of at91_sys_read/write

[Ryan Mallon]

On 09/12/11 01:41, Jean-Christophe PLAGNIOL-VILLARD wrote:

> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
> Cc: Nicolas Ferre <nicolas.ferre at atmel.com>
> ---
>  arch/arm/mach-at91/at91x40_time.c         |   28 +++++++++++++++++-----------
>  arch/arm/mach-at91/include/mach/at91x40.h |   18 +++++++++---------
>  arch/arm/mach-at91/include/mach/system.h  |    2 +-
>  3 files changed, 27 insertions(+), 21 deletions(-)
> 
> diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c
> index dfff289..6ca680a 100644
> --- a/arch/arm/mach-at91/at91x40_time.c
> +++ b/arch/arm/mach-at91/at91x40_time.c
> @@ -28,6 +28,12 @@
>  #include <asm/mach/time.h>
>  #include <mach/at91_tc.h>
>  
> +#define at91_tc_read(field) \
> +	__raw_readl(AT91_TC + field)
> +
> +#define at91_tc_write(field, value) \
> +	__raw_writel(value, AT91_TC + field);
> +


Can we make these functions please. They will get inlined anyway, but we
get the added benefits of type checking. Also you have a spurious
semicolon on the second #define.

>  /*
>   *	3 counter/timer units present.
>   */
> @@ -37,12 +43,12 @@
>  
>  static unsigned long at91x40_gettimeoffset(void)
>  {
> -	return (at91_sys_read(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_CV) * 1000000 / (AT91X40_MASTER_CLOCK / 128));
> +	return (at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_CV) * 1000000 / (AT91X40_MASTER_CLOCK / 128));
>  }


It is a good chance to split this line to fit in 80 characters while you
are editing it.

>  
>  static irqreturn_t at91x40_timer_interrupt(int irq, void *dev_id)
>  {
> -	at91_sys_read(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_SR);
> +	at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_SR);
>  	timer_tick();
>  	return IRQ_HANDLED;
>  }
> @@ -57,20 +63,20 @@ void __init at91x40_timer_init(void)
>  {
>  	unsigned int v;
>  
> -	at91_sys_write(AT91_TC + AT91_TC_BCR, 0);
> -	v = at91_sys_read(AT91_TC + AT91_TC_BMR);
> +	at91_tc_write(AT91_TC_BCR, 0);
> +	v = at91_tc_read(AT91_TC_BMR);
>  	v = (v & ~AT91_TC_TC1XC1S) | AT91_TC_TC1XC1S_NONE;
> -	at91_sys_write(AT91_TC + AT91_TC_BMR, v);
> +	at91_tc_write(AT91_TC_BMR, v);
>  
> -	at91_sys_write(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_CCR, AT91_TC_CLKDIS);
> -	at91_sys_write(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_CMR, (AT91_TC_TIMER_CLOCK4 | AT91_TC_CPCTRG));
> -	at91_sys_write(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_IDR, 0xffffffff);
> -	at91_sys_write(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_RC, (AT91X40_MASTER_CLOCK / 128) / HZ - 1);
> -	at91_sys_write(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_IER, (1<<4));
> +	at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CCR, AT91_TC_CLKDIS);
> +	at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CMR, (AT91_TC_TIMER_CLOCK4 | AT91_TC_CPCTRG));
> +	at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_IDR, 0xffffffff);
> +	at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_RC, (AT91X40_MASTER_CLOCK / 128) / HZ - 1);
> +	at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_IER, (1<<4));


Same here, some of these lines look over 80 characters. Good chance to
fix them.

>  
>  	setup_irq(AT91X40_ID_TC1, &at91x40_timer_irq);
>  
> -	at91_sys_write(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_CCR, (AT91_TC_SWTRG | AT91_TC_CLKEN));
> +	at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CCR, (AT91_TC_SWTRG | AT91_TC_CLKEN));


and here.

>  }
>  
>  struct sys_timer at91x40_timer = {
> diff --git a/arch/arm/mach-at91/include/mach/at91x40.h b/arch/arm/mach-at91/include/mach/at91x40.h
> index a57829f..9068021 100644
> --- a/arch/arm/mach-at91/include/mach/at91x40.h
> +++ b/arch/arm/mach-at91/include/mach/at91x40.h
> @@ -28,18 +28,18 @@
>  #define AT91X40_ID_IRQ2		18	/* External IRQ 2 */
>  
>  /*
> - * System Peripherals (offset from AT91_BASE_SYS)
> + * System Peripherals
>   */
>  #define AT91_BASE_SYS	0xffc00000
>  
> -#define AT91_EBI	(0xffe00000 - AT91_BASE_SYS)	/* External Bus Interface */
> -#define AT91_SF		(0xfff00000 - AT91_BASE_SYS)	/* Special Function */
> -#define AT91_USART1	(0xfffcc000 - AT91_BASE_SYS)	/* USART 1 */
> -#define AT91_USART0	(0xfffd0000 - AT91_BASE_SYS)	/* USART 0 */
> -#define AT91_TC		(0xfffe0000 - AT91_BASE_SYS)	/* Timer Counter */
> -#define AT91_PIOA	(0xffff0000 - AT91_BASE_SYS)	/* PIO Controller A */
> -#define AT91_PS		(0xffff4000 - AT91_BASE_SYS)	/* Power Save */
> -#define AT91_WD		(0xffff8000 - AT91_BASE_SYS)	/* Watchdog Timer */
> +#define AT91_EBI	0xffe00000	/* External Bus Interface */
> +#define AT91_SF		0xfff00000	/* Special Function */
> +#define AT91_USART1	0xfffcc000	/* USART 1 */
> +#define AT91_USART0	0xfffd0000	/* USART 0 */
> +#define AT91_TC		0xfffe0000	/* Timer Counter */
> +#define AT91_PIOA	0xffff0000	/* PIO Controller A */
> +#define AT91_PS		0xffff4000	/* Power Save */
> +#define AT91_WD		0xffff8000	/* Watchdog Timer */
>  
>  /*
>   * The AT91x40 series doesn't have a debug unit like the other AT91 parts.
> diff --git a/arch/arm/mach-at91/include/mach/system.h b/arch/arm/mach-at91/include/mach/system.h
> index 36af14b..a3c0fc0 100644
> --- a/arch/arm/mach-at91/include/mach/system.h
> +++ b/arch/arm/mach-at91/include/mach/system.h
> @@ -33,7 +33,7 @@ static inline void arch_idle(void)
>  	 * re-enabled by an interrupt or by a reset.
>  	 */
>  #ifdef AT91_PS
> -	at91_sys_write(AT91_PS_CR, AT91_PS_CR_CPU);
> +	__raw_writel(AT91_PS_CR_CPU, AT91_PS_CR);
>  #else
>  	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);


Is this one changed in another patch?

>  #endif


Other than that, looks good to me:

Reviewed-by: Ryan Mallon <rmallon at gmail.com>

~Ryan